Stripes of green color across the screen on Windows Vista

Original title: HELP!

Hello! There is something wrong with my graphic driver, there are green tracer on my screen and I can't play a game at all! What am I supposed to do?

Advertisement

Hello

Were there any changes (hardware or software) to the computer before the show?

Update the graphics driver and check if the problem persists.

Update a hardware driver that is not working properly (Windows Vista)

Hope this information helps.

Tags: Windows

Similar Questions

  • My says Windows Vista update, phase 3/3, do not turn your computer, that hard thing 24 hours, I can't start menu, I can't go down the screen of Windows Vista update

    I have a laptop, ran a software antivirus and then he says to Windows Vista is to install the updates, phase 1 of 3, then 2/3, then he is stuck on the phase 3/3 for 24 hours, if I turn the computer market and unplug it and try to turn back still evokes the same screen. very frustrated.

    Hello

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • Triple the screen on Windows Vista problem

    Moose title: Triple display problem

    I have a laptop Toshiba A505D and I connect a HP 2159 m 21 "LCD monitor on the left side and keep there for a second monitor, I have a hub of Toshiba DynaDock USB which has built in video card that I run a second 21 '' wide LCD monitor Acer to right of the laptop and the laptop in the center of the two to enter. Usually my office remains in the middle (on the screen of the laptop), but lately when I take the laptop home and use (I even put in place it but different monitors) it "confuses" my lap top and now I can't get my laptop to view the screen of the laptop computer, the primary monitor. It maintains show my toolbar of office and down on the monitor of left or right. I tried to change around, disconnect them them and even rebooted my system a couple of times and it won't change. As soon as I plug the monitor HP it will take the Office to this monitor automatically. I put the monitor Acer on the right side, but not the laptop screen.

    Any help would be greatly appreciated.

    Hello

    First of all, make sure that the graphics card you are using is not limited in support of two screens.

    You can visit the following links and check if it helps:

    Multiple monitors: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

    Understanding multiple monitors

    http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

    Set up multiple monitors

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

    Hope this information is useful.

  • Adobe Connect software component snap-in crashes when I try to share the screen in Windows Vista Home Premium (32 - bit) Service Pack 2

    The Adobe Connect Add-in crashes when I try to share the screen (office) in Windows Vista Home Premium (32 - bit) Service Pack 2. I get the error message with the title "Adobe Connect Add-in has stopped working". The message said: "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "The only button I can click on is"close the program ". I made sure that the screen resolution is a multiple of 16 ("1280 by 768 pixels"), as this article says. I use Adobe Connect 9 with the 'named price model host. Does anyone have the solution to this problem? Thank you.

    Do not know what could cause the problem, but Vista is not an operating system, for what it's worth.

    Acrobat Connect Pro data sheet

    I suggest that you uninstall and reinstall the Flash Player and see if it helps Uninstall Flash Player | Windows.

    It looks like not the resolution of the screen is the problem, as you mentioned, it should be something else. I would also recommend that you check your video drivers to see if there is an update, because who could help.

  • I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

    I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

    I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

    =========================================
    The info... copied on the net... may be useful:

    =====

    The Green problem bar setting in Windows Movie Maker
    http://www.bernzilla.com/item.php?id=884

    When I tried to follow the directions, I was unable to find XVid on my
    computer.  So I googled XVid and then (I think) the 2nd entrance to
    Download XVid.  After I downloaded it, I could follow the directions
    bernzilla and when I published a video - Voila! no green bar!

    After thick film Green line is published
    http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

    =====

    Good luck...
    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • How can I change the color of the screen on the websites?

    While ' messing around ' in the center of control & with stuff I know nothing about, (Duh...). I changed the color of the screen on the sites I visit, to green color. This makes the text in blue on the screen of the site impossible lo read, especially on the areas where they are needed to fill the void. Thank you for your time & expertise!

    I'm not sure I'm 100 percent, but you hear hyperlinks?

    If so,

    The "Windows color and appearance" window should open.

    Under "Item" click "hyperlink."

    Is that what you changed?

    If his watch as green, change it to blue and press [OK].

    If it isn't, press [Cancel].

    If it's not her, can give you a more precise description or maybe after a screenshot of the problem (without giving personal data address / email etc.).

    Note: Depending on the browser you are using, its possible to change the colors in the browser itself. For example with Firefox - FireFox Menu, Options, content, [color], will reach same choice specific to Firefox.

  • Satellite L300 - I do not have 32-bit colors on the screen

    Hi all

    I just bought a new laptop Toshiba Satellite L300 and after Vista initial installation it doesn t show the colors of the screen properly. I set up the resolution, but also the 32-bit color, but on the screen, it shows just something like 256 colors.

    Everyone he knew similar, any idea where I should look like or change something to have own 32-bit colors.

    Thanks Zeljko

    Hello

    To be honest, it's really strange.
    What you could do is to repeat the HARD drive recovery.

    Turn on the laptop, press the F8 key and choose fix my computer.
    Then choose Toshiba Recovery and you start the resettlement process.

    The laptop must be set to the factory settings, and you can check if the display problem would persist.

    Good bye

  • Re: Equium M50-216 - lines across the screen

    Hi my Equium M50-216 has lines across the screen and low who go up and down the screen.
    There is no picture it s just white.

    If I plug it into an external monitor I get a fine display on the monitor is so the screen is defective or something else?
    I think that the inverter is ok because it of bright and not dull.

    See you soon

    I agree with Luke.

    If the image on the external monitor is ok then the graphics card should be ok.
    If an FL inverter would be defective then everything would be visible, but just a little more dark and as behind a fog

    In your case, it looks like a display problem

    I think you should ask a technician for replacement laptop

  • Satellite L830 - horizontal line across the screen

    All new Satellite L830 has a horizontal line across the screen.

    What can be the cause and how can be fixed?

    If the laptop is brand new it back as soon as possible and ask for replacement.
    On this virtual path, it is not easy to say what the problem is here, but it may be related to faulty display, especially if you can see from the first moments when the laptop is turned on.

    Don't try anything. Request a new one. If you can not new, contact the nearest Toshiba service provider and ask for help. They need to exchange the defective part.

  • Satellite P10: clouds white and purple fading across the screen during startup

    I had problems with my laptop PC-10 so I bought a new hard drive (Fujitsu 60 GB instead of 40 GB) standard and have it myself. I was working very well with it for a long time, until suddenly I have had the strangest problem that I've ever seen on a computer...

    Sometimes, when you start the laptop, instead of the screen normal red "TOSHIBA" and the message to start Windows XP, the laptop displays simply little weird white and purple clouds fading across the screen, fading finally on a screen very dark, but not quite black.

    I thought first it was a problem with the DVD player, like when he finally gave and started normally, the DVD drive has been disabled. However, I noticed in the BIOS, under "Advanced" the Infrared Port shows intermittently - it shows with the [Disabled] setting next to him, but will be then disappear from the list, then reappear again and then go again and so on.

    Sometimes my computer will function normally, then completely shut (mouse and all) and will restart with the clouds!

    I looked in the Windows Event Viewer for when the laptop has locked up and have seen anything to do with a problem with IRQS for the Infrared Port. I disabled the infrared port in Device Manager (I managed to activate in the BIOS by loading the standard BIOS settings) and rebooted, but it started upward with the clouds once again, so I have the feeling that the infrared port is the culprit - loose connection may be defective material because it is located close to the DVD player and HD player.

    I was wondering if anyone has seen something like this before on any computer, and if they knew how to solve? It seems completely illogical that a defective IR port could change what is displayed on the screen on startup, unless of course there is something wrong with my HD boot sector?

    Any ideas?

    Thank you.

    Tom

    Hello

    I've never seen like this problem before and I don't think that this issue has something to do with the HARD drive or the IrDA port.
    As much as I know the IrDA port is not available on Satellite P10 - xxx

    For me, this looks like a faulty screen or graphics card.
    Have you tried to connect the external display? If this isn't the case, then try to do and check if it also appears on the external display.

    I recommend also to recover the laptop with Toshiba Recovery CD and then check the functionality.
    But if the malfunction appears so I would recommend contacting the Toshiba ASP for control from laptop

  • Satellite L850D - lines of color on the screen of the BIOS

    Hello

    I have a q L850D-12 (PSKGAE) and sometimes when I try to boot in the BIOS by pressing F2, I get vertical and horizontal lines and colorful on the screen some time, I get a beep sound while its weight this and other times I just get the line that I usually remove the battery and put it again and it will enter the bios setup.

    Any ideas what the cause?

    It s just an idea, but maybe it s a graphics card problem.
    In your case, I would ask the authorized Toshiba maintainer for the verification of the material.
    It is best to do while the laptop is always protected by the guarantee.

  • background color: I want to change the background color of the screen of the monitor

    I have a web image in my Office I want to change the background color of the screen of the monitor without a change in the office itself

    could you let me know how to do this?

    Thank you

    I have a web image in my Office I want to change the background color of the screen of the monitor without a change in the office itself

    could you let me know how to do this?

    Thank you

    Hello

    To change the color of the desktop background, follow these steps.

    Click on the desktop and select personalize.

    At the bottom of the window, select the color of the window.

    In the next window, select the Advanced appearance settings.

    In the element , select Office.

    Click the drop-down color 1 menu and select your favorite color. ClickApply/OK.

    I hope this helps.

    Thank you for using Windows 7

    Ronnie Vernon MVP
  • Setting the background color of the screen

    Hai...

    When my application running in the Simulator, it shows only a small portion with the bgcolor that I gave in the html file. I think that the bgcolor simply encapsulates html content. So, what should I do to view the entire screen with the bgcolor.

    The problem is that in WebWorks (which uses a control called BrowserField) to view the content, the size of the display of web pages grows to the size of the content in your HTML code.

    So if height of your HTML below the screen, it will show the background color of the screen.

    To change this, you can set the window of the display using tags or set the height of the body to the size of the screen.

  • To get the background and foreground color of the screen title

    Currently the title screen background color is black, and foreground color is white.

    But when we use custom theme then it can have different background and foreground colors.

    That's why I need to pick up the color of the screen title properties.

    How can I achieve this?

    Thank you

    I think you want to color your application according to the background and foreground color! Override the paint of the main method and use instance graphics for call getColor () and getBackgroundColor ()... Save it to integer variables and use it anywhere where you need...

    See you soon...

  • Cursor starts moving across the screen from left to right after the wake up the computer from standby or hibernation

    Original title: cursor goes wild

    My PC to 'wake up' sleep/hibernate, the cursor initially moving across the screen from left to right, in which window is open, destroy all the document is on the screen. I force Windows to close. How to solve this other than turning off standby/hibernation?

    Looks like the cursor of the mouse is very sensitive when the computer comes out of standby or hibernation.
    I suggest that you go in the mouse properties and lower the sensitivity and see if that helps.
    You also need to update any driver mouse if possible.

    Let us know if that helps.

    Marilyn

Maybe you are looking for