Stuck at installing windows 10 windows 7

When I try to install windows 10. It stuck at 81%, configuration setting at 4%, after that it blank screen which means that installing a force stopped and the computer restarts again, and the windows 7 is again my operating system. How should I do?

Close the wizard, restart your computer, disable your security software (Antivirus/Firewall), then restart the installation to see if it progresses. If this does not work, try to upgrade manually.

Tags: Windows

Similar Questions

  • Configuration of updates is stuck at installing windows updates 1-6

    My computer says"Please, do not power off or unplug your computer, windows setup updates 1-6... That's all. It stays like that forever... I tried to go to control panel to update and it says 'check updates' for hours... no one knows what is wrong and what I can do to fix this?

    Thank you!!

    Hi galwaylady,

    ·        What operating system is installed on your machine?

    ·        You did it all change hardware or software on your machine before this problem?

    You can follow this link & check if it helps.

    Method 1

    You can restart the computer & follow this link & check if the problem persists.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

    Method 2

    If you are using Windows 7, you can run the Windows Update Troubleshooter, and then try to install the update.

    Open the Windows Update troubleshooting tool

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Installed windows 10 64 bit on MBP early 2011, installing the driver software stuck bootcamp

    Installed windows 10 32 bit on MBP early 2011. Bootcamp software support 4.0 installs fine.

    And then upgraded to windows 10 64-bit on the MBP even. But bootcamp software installs ok at first, then gets stuck in the audio driver installation.

    Can someone suggest me the right version of the bootcamp software please?

    Also, I even this problems from yesterday, my macbook pro late 2011 updated for windows 7 64 bit pro at 10 64-bit windows, then all my drivers boot camp work but when upgraded to Windows 10 pro, Setup stopped in audio only step no thing happened, thank you, I need to fix the installation for my mac files because I have more than work on windows today...

  • Windows 7 Installation stuck after installing new graphics card

    Before that, my office is fully compatible with Windows 7, but after that I installed a new graphics (ATI Radeon HD 5450) I can't install Windows 7, when I started to install that everything seems fine, but after it restarted and end Installation it just stuck there!

    Any help?
    I tried to remove the new graphics card and the use of the onboard graphics to install Windows 7 still does not work?
    NOTE: I used Windows XP before installing the new graphics card.
    I'm using Acer Aspire M1800
    CPU: Intel Pentium E6300 processor
    Memory: 2 GB DDR2
    Help appreciated
    -Joey

    Hello Joey

    If right now you go back to Windows XP and the system is slow correct? You have the drivers installed since you went back to XP? If not then click here and select your system. This will bring up a list of available drivers for you. Also, I've included a link below to get the drivers for your new video card. My problem with the question is if your system has enough power to support the video card. Here are the specifications of your card. Check the configuration required for the map and you ensure that you have adequate food. Let me know if it helps. Thank you.

    ATI Radeon HD 5450 Windows XP Drivers

  • Install Windows 7 stuck on screen 'Verifying DMI pool data'

    Hello

    so I installed windows 7 on my aspire m1110 (Cpu: AMD Athlon 64 x 2 4800 + Ram: 3 GB video card: ATI Radeon HD 3450 1526 MB) and the final rebot, the computer is stuck in the screen "Verifying DMI pool data". Then after an hour or two, I forced the computer to shutdown (clicked the power button) and after it the pc just does not start. NOTHING. I click the power button and does not appear any image. I can't boot from the cd or dvd... I can't do anything. Could someone help? I'm tired of Windows vista because it's so slow and I really want to Windows 7. Meanwhile, I solved and back to windows vista, but I don't want that. My computer is not compatible with windows 7?

    OK, first you install windows 7, it goes through all the steps and installs and then when is it recharges and gets stuck on VERIFIANT DMI, shut down the computer and boot from the cd again once, when it loads and goes to the screen when you press INSTALL WINDOWS on this screen, it is also a windows repair option press that and don't select auto repair. go to the command prompt

  • Toshiba Tecra S3 - new SSD stuck on JBOD, cannot install windows on it

    I just got myself a Kingston V series 64 GB SSD drive, but I can't it is detected by windows installation programs.
    After looking around, I found that the Tecra S3 drives must be "1RAID 0" and not JBOD to activate windows to
    be installed on it. (unless you use the recovery CD, which I did not right now, even if I wanted to use it)

    I also found the "collar" necessary to get the BIOS to change when you get to 'run the creation '.
    is 1,2,3,4, [Enter].

    But here's the catch: + BIOS does not account for the string... +.
    I type the string, 1234, [Enter], and it cancels my desired, change as if I said NO and set it to JBOD.
    (if I don't type the string on the right, it comes out, but stays 1raid0 and "run the creation" is still there)
    I tried on one of my other drives and it worked fine, but for some reason this drive seems not wanting me to.

    I tried the USB drive (works fine) and the BIOS sees it for what it is, so that the drive works well (from my tests)

    Would be really appreciated any ideas on what to do now, I'm out of ideas on what I did not properly
    Thank you!

    Hello

    > I just got myself a Kingston V series 64 GB SSD drive, but I can't it is detected by windows installers

    Have you included the RAID driver in Windows before you tried to reinstall the OS?
    On the European driver Toshiba page, you can find the RAID driver to be included when installing Windows installation.

    Regarding the change in BIOS RAID;
    I m not very good, but it might be possible that you cannot change the reason the SSD RAID option.
    If other drives are working properly and that the RAID may be changed using a common HARD disk the problem is related to the new SSD drive.

    Maybe you need to update the firmware on the SSD drive to check it out.

  • Need help to install Windows 8.1 on the partition, bootcamp on Macbook Pro 15 "mid-2010 w / no optical drive"

    I tried for almost a week in all possible ways to get windows installed on a boot camp partition on my main SSD 1 TB drive as a partition, or on my HARD drive, which is installed in place of the optical drive.  So far, everything I tried to give me some sort of error at some point in the process.  It seems that many of them are case by case, so I thought that I invite you all and see if you can help!

    I use a Macbook Pro 15 "mid-2010 that I improved with a 1 TB SSD drive as the startup disk.  My optical drive was not functional, so I moved my old 500 GB HARD drive to the location of the optical Bay.  I am also under the latest version of El Capitan (10.11.6)
    Here are my system specs:


    Presentation of the material:

    Model name: MacBook Pro

    Model identifier: MacBookPro6, 2

    Processor name: Intel Core i7

    Processor speed: 2.8 GHz

    Number of processors: 1

    Total number of cores: 2

    (By heart) L2 Cache: 256 KB

    L3 Cache: 4 MB

    Memory: 8 GB

    Processor speed of interconnection: 4.8 GT/s

    Boot ROM version: MBP61.0057.B11

    Version of the SCM (System): 1.58f17

    What I tried (from what I remember):

    I tried to change the Bootcamp info.plist file for my version of the macbook pro to use a USB stick for the installer.  It seems to have installed correctly but once I partition the disk and restart the computer, it gets stuck on a white screen with the Apple logo and I am forced to make a hard stop and then hold down option to boot into OS X, recovery, or the EFI Boot.

    If I go through the windows installation to start the EFI system, I get an error of:
    "Windows cannot be installed to this disk.  The selected disk is a MBR partition table.  On EFI systems, Windows cannot be installed on GPT disks. »

    I also tried to create a partition by using disk utility, and that too made me an error in the installation of windows.

    So far, the only way that I'm away from windows to run at all has been using the free trial of VMware Fusion 8... but I intend to use windows for more intensive tasks like audio pro, and merger simply does not offer the performance necessary to run these programs.  I'm hoping to install windows 8.1 on my internal SSD or HARD drive, regardless of the work - as long as OS X and files associated with it are left alone.

    If someone could help me please understand this point, I would really appreciate it!

    Thank you

    If your computer has an optical drive, you must use the optical drive to install Windows using Boot Camp Assistant.

  • How to install Windows 10 on mac not supported

    Hi all

    I have a MacBook Pro 15 inch 2011 lag and I try to install Windows 10. I've tried 3 different methods. I can provide more information if necessary.

    I had running Windows for 10 minutes (2 reboots) until he got stuck on the screen to start due to an unknown error (probably error compatibility)

    I am currently give up and try to install Windows 7 instead, hoping that he'll be fine

    If any of you guys have any suggestions please tell me this is greatly appreciated!

    I am currently give up and try to install Windows 7 instead, hoping that he'll be fine

    I don't think that you can install Windows 7 with Boot Camp on El Capitan:

    • A Microsoft Windows installation media or disc image (ISO) containing a 64-bit version of Microsoft Windows 8 or later *.

    From: How to install Windows using Boot Camp - Apple Support.

    Windows 10 is simply too new for your Mac, and Windows 7 is too old. It is quite a difficult situation. If you really need Windows, you would need to get a copy of Windows 8, or put to level to an earlier version of Mac OS X with a version of Boot Camp that works in Windows 7.

  • Install Windows 7 on an iMac without Apple software

    I have 'experimented' with the installation of Windows 7 on iMac (20-inch 2.0 GHz Core 2 Duo, IIRC) mother and managed to enter an insensitive State and I'm trying to understand why. In short, the objective here is to determine how to install Windows 7 on an iMac (starting with a blank hard drive).

    A little history: MOM (and me) didn't like the Apple OS, so she was fortunately in Linux (CentOS 6) for a couple of years, but for various reasons, she now needs Windows. In the past, I installed Linux and Windows on anything and everything with a CPU, largely without major problems (so far). To clarify, install Linux was fine on this iMac, only Windows turns out to be difficult.

    One thing that seems to cause me a lot of trouble, is that - as I understand it: it's hard / cannot access all the options start at low altitude on an iMac (for example usual UEFI / BIOS stuff). Is this correct, or am I missing something?

    Another issue I have is that almost all the information that I find online made the assumption that the Apple OS is installed. This is clearly not the case for me - I've invested in Snow Leopard, a long time ago, but quickly decided it wasn't for me, erased the hard drive, installed CentOS and released the Snow Leopard installation media in the desert.

    The question I'm stuck, is the Windows 7 Installer refuses to install on the hard disk. He creates with happiness and format a primary partition, but gives the following error:

    Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Make sure that the drive controller is enabled in the computer's BIOS menu.


    If I could have access to all the low-level boot options, then maybe I could investigate this matter. Can anyone offer advice?

    Here is the optimal solution to the problem: buy a Windows computer. They are cheap. A Mac with OS X installed can run Windows using Boot Camp Assistant for a system dual-boot. Only then do you get drivers Windows requires to be used with Apple hardware.

  • Error message when you try to install Windows on OSX 10.10.5 10

    I have a Mid-2014 retina Macbook Pro and I am trying to use the Bootcamp Assistant to install Windows 10 on OS X 10.10.5 and Bootcamp version is 5.1.4. I can't upgrade to El Capitan from now due to work related software, long story!

    I took the steps so far:

    (1) reset the PRAM.

    (2) reset SMC.

    (3) ensure that only a single partition is present using disk utility.

    (4) check the permissions of the drive and repair at least twice.

    (5) check the disc.

    (6) use Bootcamp assistant create the Windows Installer by using 64-bit Windows 10 iso file downloaded from Ms. All boxes have been checked.

    (7) in a suitable place when Windows Setup asks me what partition choose, I select created Bootcamp partition and click on Format. Product key has been entered each time.

    (8) installation continues until the point where it says "Ending up", then a pop-up window comes up saying "Windows cannot update the configuration to start the computer, Setup cannot continue."

    (9) I click OK and the window behind what is said "installation has been cancelled, any changes made to your computer will not be saved."

    (10) the computer is stuck on this screen for awhile. When, finally, he tries to restart, I just get a white screen. and eventually everything goes off.

    (11) when I turn on again, if I hold down the Option, I can see the OS X partition, partition Windows, recovery disc, then Windows on my USB (in yellow) and the "EFI Boot' in yellow.

    (12) I tried to click on Boot EFI, and goes through the same installation process and gives me the same error.

    (13) I tried to click on the Windows USB button, it starts to install (with the normal resolution unlike every other time) and this time gives me the error message "Windows cannot be installed on partition disk 0" (View details) "when I click it, it says"Windows cannot be installed to this disk. The selected disk is the GPT partition style. »

    I'm pulling my hair out on this one (and I don't have much to lose) Please HELP!

    Your Mac of 2014 is able to support two different types of Windows, most modern BIOS or EFI old installation.

    The Windows icon on USB is the method inherited from the BIOS while the start EFI icon is the most recent and modern method. Each has its own requirements for partitioning.

    2014 BC on 5.1.4 Assistant should have three check boxes. The first two should be checked only once to build the installer, while the last one can be used as needed.

    1. use the last checkbox to delete the current partition of BC.

    2. use only a USB flash drive (USB2 is preferable), other USB devices or SD cards cause problems.

    3. run SMC/NVRAM reset external storage after everything is disconnected.

    4. the USB should be directly connected on the Mac. Do not use a USB hub.

    5. your ISO source must be an ISO only 64-bit and about 4 + GB. ISOs larger and mixed-mode are not valid for MCR, although they can run on an ordinary PC.

    6 re - run BCA and check the last box - only install or delete... and try again.

  • Tecra M11 - 11J - cannot install Windows 7 64 bit

    Tried to upgrade a Tecra M11 - 11J for Windows 7 64-bit.
    The installation gets all the "Loading Windows files" screen, then turns off and freezes, with the release of maxing out CPU fan but no HARD disk activity.

    Have tried to reinstall XP (works fine), flashing the BIOS to the latest version, re-seats of the RAM, change the HARD drive in "Compatibility" mode and reinstall Win 7 - same problem.

    Have you tried Win 7 32 bit - the same problem.
    Installation of USB, instead of DVD - same problem.
    Different flavors of Win 7 - same problem!

    It's extremely frustrating.
    I upgraded the memory up to 8 GB, hoping to take advantage of this with W7x64 and now I'm stuck with a XP machine and 4 GB of of of the RAM to lose.

    Would be very grateful for any suggestion.

    Thank you.

    and installation of Win 7 does not even using the old 4 GB of RAM?

    Or have you tried to install Windows 7 on the Tecra M11 using the new 8 GB of RAM?

    What of the HARD drive? The HARD drive is displayed on the first page of the BIOS?

  • Computer OS used to start after installing windows 10

    Hello im having problem starting my system after installing windows 10. I did the install and it worked fine since the upgrade to 8.1. But then I tried to format the drive and in the menu format, he's stuck at 2%, and then I restarted the computer. Now it will hang at the hp logo and go back to the same logo. Do I have to replace my hard drive?

    What I understand, if you have completed the 10 Windows Installer and everything has happened until the end, then you are supposed to be able to do a clean install with the download of Windows 10 DVD or USB.  With a working computer, GO to THIS PAGEand scroll down to the button "download tool" selection the 64-bit version.  Once clicked, it will ask you if you want a DVD or USB for the iso.

    Once it's done and you have the DVD or the USB version, see if you can install Windows 10.  If this fails, you may need to replace the hard drive.

  • HP pavilion g6-1159sa: after installing windows 7 home prem 64 bit disk a hard nine, I can't get internet connection

    Hi Please help me im not witty but here's PCs. I have a hp pavilion 1159sa g6, product no.-ls294ea #abu

    I had to install a new hard drive for my laptop I did without any problem - the hard drive was the easy bit. then I had to install microsoft windows 7 Home premium 64 bit (clean install) I've done after browsing the web on how to exactly to install windows 7 using a guide step by step useful, I found, all that has happened to the plan. but after the installation, I could not without an internet connection, the ethernet cable wireless or directly using the router.

    im guessing that I have missing drivers? & it is were im stuck! as I said im a complete Newbie, so I would really appreciate your help to try to connect again. I use a different computer, so I can download the drivers, I need usb key, but I don't know what drivers :-(

    I look forward to hear from you, but please explain in simple terms on how should I proceed, thank you very much for reading, I hope you can help I am desperate.  Thanks again.

    You are the very welcome.

    Here are links to the drivers you need...

    network controller:

    This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

    File name: sp56942.exe

    Ethernet controller:

    This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

    File name: sp55031.exe

    PCI device:

    This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

    File name: sp55030.exe

    Simple PCI communications controller:

    This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

    File name: sp52795.exe

    In addition, don't forget to install the graphics driver.  A missing graphic driver normally does not appear in the category other devices.  If a PC does not have graphics drivers installed, under the category of device display cards, there will be a device named Standard VGA adapter if the graphics driver must be installed.

    Your model, you should see an Intel HD graphics adapter.

    If you see a Standard VGA card, then you must install this graphics driver...

    This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp55027.exe

  • Installed Windows & 32 Bit drivers and USB ports don't DO NOT WORK.

    I bugh a laptop HP Pavillion 14 TS who came to preinstall Windows 8.1 64-bit I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and 2 uSB ports where I plug in my mouse and other devices of SB to do more work.

    I did a back up of the established SW leader who has all the HP dvers for my laptop but will not install the network and video of divers. And when I try to install the drives, I get the error message saying that they are not compatible with this version of Windows.

    I loked on the HP site under my model of laptop that s as above, but HP don't do my notebook drivers for Windows 7 32. And I looked on both the Realteck site for network wireless Realteck and Ethernet Realteck drivers but none of them work or install on my OS. Intel video drivers do not work either. So I'm really stuck one I can not return to 8.1 Windows as if that 32-bit Windows 7 works on my laptop but most of my drivers is not compatible with the operating system and I don't want not to install 64-bit Windows, I like 32-bit.

    Drivers that do not work on Windows 7 32-bit are:

    Realteck RTL8188EE 802 - 11 b/gn witeless lan

    Die Ethernet Realteck and

    Intel High definition graphics driver

    That don't work at all under Windows 7 32 bit because they are the only 64-bit drivers.

    So can you please post me a link network bth and drvers of graphics from Intel that works with my laptop. I tried many different drivers Realteck and raphics for Windows 7, but none of them DOES not work on my system. And none of my USB ports are no longer works. So, how can I fix this?

    Hello:

    Should be no problem to get W7 32 bit to work on this model.

    Just use all the drivers and software from the HP Probook 450 G0 on your model, except the Audio, BIOS and firmware files.

    Your model uses only the Intel HD graphics driver.

    The first pilot, you need to install the Intel chipset installation utility and reboot.

    http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?cc=us&lang=en&sp4ts.Oid=5359407&AC.admitted=1408825729704.876444892.492883150

    Audio: Accept the agreement.  Download and install the driver first on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

    If for some reason, this model Intel HD graphics driver does not work, use this one...

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23713

  • Failed to initialize and install Windows 8.1 - Yoga 2 13

    Hello world

    I got a Yoga 2 13 who has recently had problems starting where it can no longer start Windows. I used an Ubuntu Live USB to see if I could access the HARD drive but no luck there, said that there is something wrong with it. Decided to install Windows 8.1 fees but I'm having issues with the installation. I boot USB bootable with 8.1 and it stuck at a black screen with only the cursor work. I started out in the same on a Yoga Pro 2 USB port and I get directly to the Windows installation screen. What could be the problem here? I see again the HDD in the BIOS is not quite dead.

    Thank you

    Marco

    Well, it seems that the hard drive has some bad sectors, so I just replaced it with an SSD. Now my next question is, the CD key that is embedded in the BIOS is for Windows 8, but which version? Family, professional? What image of Windows is good?

Maybe you are looking for

  • my home page

    Often, when I launch FF, I didn't my homepage together but the Mozilla's Firefox page.How can I prevent this and always automatically go to my home page?

  • Broadcom BCM943228HMB 802.11abgn adapter Wi - Fi 2 x 2.

    I use a new computer h8 - 1520t. My wireless is card is: Broadcom BCM943228HMB 802.11abgn 2 x 2 Wi - Fi adapter. This wireless card will work also on the strip of the 5 GHz WiFi? My router is only 2.4 GHZ and the band is very too cluttered (heavily u

  • Catch a signal which is out of sync on a scope.

    Hi all As the title says I'm trying to catch a signal on a scope when its out of sync. The signals that I resemble a bipolar seesaw that gets cut off at the beginning. Then it starts begins to descend, then go to half way down for a positive negative

  • Vista and Java updates.

    Cannot download Vista updates or Java. I understand that it is a permissions problem and followed the advice to get to this point. Also recommended to indicate 0x80070005 and a copy of the Agent of the Servicing\Retry based on HKLM\software\Microsoft

  • have windows 7. Homepage. do not all results for exfat. 512 GB

    I have Windows 7 home addition. also an EXfat 512 GB flash drive. But do not work. He is unable to format to NTFS