Stuck at windows starts after installation of SP3.

Safe mode does not work, the restore point does not work. I tried to fix it but wonder the system ID of the administrator and I for life can't remember what it is to see how I do not use it to connect to my computer at home. How can I fix if none of the working tools?

I was happy with XP until the load of SP3.

Help me please get past the 'Starting Windows' screen so that I can get rid of SP3 myselft and get back to work on my computer... ARRRGGH!

-Rodney

Well done!

It is really not a good 'best practices' to give too much advice on how to do to clear the administrator password because someone may have acquired a stolen laptop or it could be some children posing as an adult trying to penetrate into the computer of Dad and MOM.

I could really care in this regard and it is so easy to understand with even the slightest research on Google, but I can understand the concept of reveal things not explicitly.  I would venture to say that no Microsoft Support engineer has an idea how to do anyway since there is no Microsoft KB article about it - except to reinstall it, which is also ridiculous.

Remove the HARD drive and its implementation are a cage is also an idea of the lack of actual experience in fixing these problems - very few people are going to have a cage or a machine 'extra' around the pose, but Matthew_Ha Forum Moderator, I think, done the best he can to try to help and seems like a swell guy (but could use more practical real world).

Of course, the idea that you must have a Windows CD is also incorrect and many people have never seen one in their life (little or no XP troubleshooting experience of the real world again).

I suggest a few things for you to follow, because it is quite rare that a MS update will cause no start scenario - there is always something else, like an outdated AV program and your is not specified as the MS Answers forums is horribly negligent in not demand any information from system when a new question is asked.

No matter what you use for malware protection, follow these steps:

Download, install, update and do a full scan with these free malware detection programs at:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
They can be uninstalled later if you wish.

In addition to new recovery bootable CD Console, is also very practical:

http://www.hirensbootcd.org/download/

Tags: Windows

Similar Questions

  • [Solved] pc with xp home edition as the operating system does not start after installation of SP2 via automatic updates

    Hello everyone. After formatting my hard drive I reinstalled windows xp edition sp1 family and then installed the latest version of windows update agent. I have the auto update set to download the updates automatically and notify me when they are ready to be installed. Initially, he found 3 updates that I installed and rebooted. He concluded 58 updates. Again, I've installed and restarted. After that, we found ServicePack 2, I installed as well. But after the reboot, the pc does not start. What I get is the windows xp logo which discoloures after a few seconds and I don't see a bar moving from left to right. I left it like that for 3 hours, but nothing has changed. Also, it does not start in safe mode. I get a screen with red and green vertical lines in this case. Anyone know what's the problem? I'd appreciate any help. Thank you.

    I was finally able to solve this problem. That's what I did. I reinstalled windows xp home and followed the same path (but his definition of the automatic updates notify me before downloading or installing updates) until the automatic updates found in the new service pack 2. This time that I did not choose to download it. Instead I downloaded from here http://www.microsoft.com/en-us/download/details.aspx?id=28 and then started in safe mode and installed. I don't know one that makes the difference but service pack 2 has been successfully installed this time and tha pc was able to start after installation. Before that, I also downloaded and installed the latest versions of 2 drivers through drivermax. I mention this in the case where he has also made a difference. After the service pack 2 installation and restart, automatic updates will be found a few others brought up-to-date, but after installation and reboot, it found no others. I had to visit update windows Internet explore and search for updates it and managed to find other updates and finally SP3.

  • Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

    Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

    * original title - I'm having a problem *.

    You have the latest drivers?
    http://www.nvidia.com/page/support.html

    Aero - Windows 7 - How to troubleshoot problems with Aero

    (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

    (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

    (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

    (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

    If it does not---> click Start---> right click computer---> click Properties

    Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

    Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

  • What do I need to uninstall Windows 7 after installation of Windows 10?

    What do I need to uninstall Windows 7 after installation of Windows 10?

    You upgrade from Windows 7 to Windows 10?  If so, how it remains on the disk?

    If your question is about whether the operating system that is used to qualify for upgrade can be used even if it is still eligible for the upgrade, the answer is no it is essential will be blocked until the upgrade is removed during the reinstallation of the old operating system.  Then it may take wake-up phone to retrieve the old operating system license.  Also is it better to keep the old operating system using a Windows 7 System Image backup which can recover the old BONES in 20 minutes and preserves the activation.

    Let us know if that answers your question.

  • Acrobat CC takes windows programs after installation and the change of the icons of other programs

    For about a year Acrobat DC returned to other Windows programs after installation and changed the icons of other programs.

    Then, I had to uninstall it in order to use the PC, Win 7 64 Pro. I.e. When you click Word, Acrobat DC opens and then report it cannot open the word file.

    I see no chanhes in the list of Standard programs.

    Same result with Cloud installion and leading direct download.

    Any suggestions?

    How we stop to resume my perpetual license CS6 creative cloud?

    https://forums.Adobe.com/thread/1584746

  • I need help for Windows Media Player to start after installation. I click on the icon and nothing happens. I have try the exe file in the program folder and still nothing.

    I can't get Windows MEdia Player to start once I install it. My PC crashed and I reinstalled XP Pro. and did all the updates that were needed. Then I installed Media Player 11 and tried to boot, and it wouldn't start. I tried to boot from the program folder files, and still he wouldn't. I uninstalled and reinstalled several times and sometimes it worked once after installation then once you close it never starts again. What should I do to make it work. I need my music and videos.

    I can't get Windows MEdia Player to start once I install it. My PC crashed and I reinstalled XP Pro. and did all the updates that were needed. Then I installed Media Player 11 and tried to boot, and it wouldn't start. I tried to boot from the program folder files, and still he wouldn't. I uninstalled and reinstalled several times and sometimes it worked once after installation then once you close it never starts again. What should I do to make it work. I need my music and videos.

    ================================
    In some cases, there may be multiple instances of
    WMP running.

    Try to open the Task Manager and look for the instances
    from: wmplayer.exe and complete the process on each of them.

    Also... Take a look at the following article:

    (925704) when you try to use Windows
    Media Player 11, the program does not work
    Start or some user interface elements are empty
    http://support.Microsoft.com/kb/925704
    John Inzer - MS - MVP - digital media experience

  • Need help to start in Windows 7 after installation of Windows XP in dual boot!

    Well, I had a Windows 7 system with a partition C: and D:... Windows 7 is on C: and no OS was on D:... I then installed Windows XP in D:... Now when I start my computer, I go directly under Windows XP... How can I get instead a the operating system boot menu is displayed at startup, I can choose which OS to start?

    Hello

    See the article below which might help you to fix this problem.

    Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration
    http://support.Microsoft.com/kb/919529

  • Failed to start after installation ripple 0.9.1

    I'm new to Blackberry Webworks development (working on my first Playbook application).  I am currently installing the tools and SDKs.  When I try to start waving after installation I get a Windows error "Application failed to initialize...". »

    I'm on WinXP SP3.

    Any advice?

    Concerning

    DM

    Edit: My Windows XP SP3 is a vmware VM.  is this a problem?

    Happy that you said that it was VM.

    Can you try disabling the video / hardware acceleration in your VM player?  This is a feature that has caused problems with other developers.

  • Windows 10: After installation

    9 days ago I installed Windows 10 successfully on my iMac end-2012. I wonder since if I still need to keep my USB Flash drive plugged after installation. I have kept in just in case wherever she would break something and tried to find an answer but decided to ask here. So basically what I have to keep the flash drive in my iMac or will I still be able to run Windows 10 unless it is plugged. Thanks for all who will read this and help me with this problem.

    I see no reason to keep the flash drive is plugged.

    Was this a new installation or an upgrade of Windows 10? Your order of brightness of the keyboard (and other features on the row of function keys) work? Cam sex? Touchpad?

  • Does not start after installation of the graphics driver

    After installation of the graphics driver from Nvidia NVS 140 m on the new installation of XP Pro SP0, black screen on reboot. All solutions?

    If the minimum driver was SP2, then you must have installed. I recommend that you have installed SP3 so that all the latest patches and security patches are in place.

  • Could not start after installation of Service Pack 1 - stop: 0x0000c1F5

    original title: stop: 0x0000c1F5

    my computer does not start after you install the service pak1 on my computer toshiba laptop, don't get into safe mode either I get an error message! 0xc01a001d! 3733/91430(\Registry\Machine\Componets\Derived Data...) and also the error code Stop:! 0x0000c1F5

    Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".

    http://support.Microsoft.com/kb/946084

    How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer

    http://support.Microsoft.com/kb/970101

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Failed to start after installation ('no internet connection')

    After installation, when I start one of the programs of TC it tells me that either there is no Internet time setting my computer does not. I checked that no proxy server is set and that (of course) my clock is set correctly. We have installed the CHT several times in the team without problems is not a firewall issue. Any ideas?

    ADDING: I checked the four needed to record server address is accessible. Is there some sort of record in offline mode? It seems that even users who really have no internet connection (for example for security reasons) must be able to register...

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • ESXi starts after installation but Drops on the next reboot of the BIOS

    Hello

    Running one

    I7 - 4770 k treats on an Asus motherboard with off UFEL z87 - pro.

    Added a new network card.

    ESXI5.1 seems to install ok and when did his own first restart after installation works very well.

    If I try to restart again the system ignores for the BIOS setting.

    Any ideas?

    Thank you very much

    At this problem.

    Problem is I have not worked with the new BIOS and rather than put on display could not find a boot disk had a code for it.

    AllI had to do was ensure the UFEI was tuend off the coast while the installation has started there is an option to press SHIFT + o and add a space, then formatwithmbr to the end of the line and it worked.

    Thank you very much

  • Can "t, print, help, Windows, XP, after installation, latest, Adobe, Reader, for cloud.

    Can "t, printing using home XPPour Windows desktop after installing the latest Adobe for the Cloud player. Please notify. Thank you. Paul McL

    CD player is not compatible with Windows XP. Click here to get a compatible version: Adobe Acrobat Reader DC install for all versions

  • Windows Vista won't start after installation of microsoft updates

    I just install microsoft updates, then the computer is turned off and it does not load windows.  A box appears that says
    Microsoft Visual C ++ Runtime Library.
    This application has requested the execution to terminate in an unusual way.  For more information, contact the application support team.

    The options are to click OK or close the box.  I tried both and it just keeps popping up the same box as above.

    Hi Mas_007,

    Welcome to Microsoft Vista answers Forum!

    I have a few here that might solve the problem.

    A.) Firstly, I suggest that you start the computer in safe mode and check if you are able to boot without any problems, safe mode starts Windows with a limited set of files and drivers. Startup programs do not run in safe mode, and only the basic drivers needed to start Windows are installed that, follow these steps to start the computer in safe mode with networking:

    To restart the computer using safe mode, restart the computer and press the F8 key for about four to five times. Appears in safe mode listed in the advanced options of Windows. Select Safe Mode, and then press ENTER.

    (B) I suggest that you perform a clean boot on your computer, to help troubleshoot error messages and other issues; You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

    (1) perform the clean boot (check the link to perform the clean boot)

    (2) enable half the services

    (3) determine whether the problem returns

    (4) enable half of the startup items

    (5) determine if the problem returns

    (6) repeat the steps above until you find out which program or service is causing the issue

    After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

    Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135.

    (C.) I suggest that you perform a scan of the file system [SFC] checker on the computer, the scan replaces the failed system of files with the original files from version of Windows on the computer system, follow the steps below to perform a scan:

    I suggest to empty the temp folder and later, follow these steps:

    i. Click Start > type % temp % in the start search box > press on enter > delete everything present in the temp folder.

    1. Click Start and type cmd in the box start the search.

    2. right click on cmd in the list programs and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue

    3. at the command calls, the following line and press ENTER: sfc/scannow

    When the analysis is complete, test to see if the problem you are experiencing is resolved.

    Additional information: http://support.microsoft.com/kb/936212

    Hope this information is useful.
    Let me know if it worked.
    All the best!

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • No sound on videos from facebook

    HelloSuddenly I have no sound during playback of videos on facebook. It's OK on Chrome. I've updated plug-ins; Downloaded video from Youtube Flash Player. Can't think what else to do. Help!

  • Help! My Mac Pro is displayed as being in the United States

    Can Hi anyone help with this strange problem? I live in the United Kingdom and attempted to place a bet earlier, but I got the message that I can't because I am located in the States. (Last time I looked at Kent was in the United Kingdom) Recently, t

  • Error PXE - E61 satellite 1800-712

    During boot the laptop displays briefly messages PXE - E61 Media test failure check cable and PXE - M0F out Intel PXE ROM. It began after a couple of 'experts' tried to get a Combo CDRW/DVD drive replacement to work. It seems to be no real problem, a

  • Cannot use FN + F6/F7 to set the brightness of the screen on my Tecra M2

    Hello!! I bought laptop Tecra M2 but when I format it with Windows XP SP2 keys FN + F6/F7 is not active for display quality and I formatted it device Please I want answers.

  • Migrating mail to Outlook XP to new computer with Windows 8

    I want to buy a new computer with Windows 8. I am running Microsoft Outlook 2003 on Windows XP Edition version 2002 family. How can I migrate my email from my old computer to the new? Thank you