Stuck in windows 10
Hi guys,.
I bought a MacBook pro yesterday and BOUGHT a full version of windows 10 on the advice of the apple staff as the last 15 "does not work my older windows 7. So, I'm already 100 Pocket Books! At halfway through the installation of windows, the installation program suspended, finally cleared itself... But now Im stuck in windows and can not return to the Apple OS. I tried to leave windows but it still restarts in windows. I have tbought bootcamp should give me an option to start either) 1 Apple or Windows) 2. How the hell do p, ease back?
Restart your computer, hold down the option key as soon as you hear the chime. You devriez then see 3 boot options: Windows 1) 10, 2) Mac OS X and recovery partition 3). If you don't see it, everything is good, just select the Mac OS X and go. I haven't used BootCamp for a long time, but I think that one of the tools that apple provides with support of BootCamp software is a small program that allows you to restart the computer from Windows and start to the Mac. The drivers and utilities Windows is located in spring training if you don't it not already installed.
Now if you don't see all the 3 options when restart the computer by pressing the option key, this means that you have accidentally formatted the Partition of Mac OS and Windows installed there instead of the partition it should have gone in. If this is the case, you can select the recovery partition, run disk utility to clear Windows, then download and reinstall the OS. Then, you get to run the Windows Installer again and carefully to format the correct partition. (Been there, done that, felt stupid, been on it)
Tags: Windows Software
Similar Questions
-
"" Resumes its stuck at "Windows" (windows xp)
Hi, my friends laptop is stuck on windows takes over its screen (windows xp) I'm a newbie to troubleshooting as well as advice for this problem are very much appreciated.
'the recovery of windows' are the provided message when the system resumes from hibernation.
When a computer into hibernation all the memory content is downloaded in a file named hiberfil.sys before turning off the computer.
Subsequently, when the computer is turned on, the contents of the hiberfil.sys file is reloaded in memory so that 'windows to resume. "
The hiberfil.sys file is sometimes damaged and unusable. but there could be other factors involved which prevents 'recovery windows.
Perhaps, the computer cannot initialize hardware, as the modem. or maybe that the file system is unstable or the disk is highly fragmented. It might even be antiviral or startup programs that are unstable or incorrectly configured before hibernation.
the only recourse is to restart the system and let windows start upward normally and then you can proceed with trying to optimize your system.
-
I'm stuck on Windows XP Service Pack 2. I can't update XP
I'm stuck on Windows XP SP2 after reinstalling after a failure or replacement of disc. I have validated and reloaded SP2 of Microsoft supplied CD and update of IE ver 6 to ver 8.
But I get the following message appears when you try to upgrade to SP3 via Internet. I am going round in loops and cannot pass through this point. Any ideas please? Reads the message...
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.
For self-help options:
To support options:
- Microsoft online assisted support (no cost for Windows Update issues)
Download and install the version heresp3 COMPUTER. It's the same thing that make Windows update.
-
Message stuck in Windows Mail Outbox
I have a stuck in my Outbox Windows Mail e-mail message. I can't delete it or send it. When I try to do it I get an error message that says "an unknown error has occurred." Given that this e-mail message is stuck in my Outbox I can't send messages. However, I can receive messages. I got my email provider try to fix this problem, but they couldn't. They said to contact Microsoft.
See if it will delete everything in working in offline mode.
If not...................
How to remove an Undeletable Message stuck in Windows Mail
http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.htmlWMUtil
http://www.oehelp.com/WMUtil/default.aspxBruce Hagen ~ MS - MVP [Mail]
-
Zip code FF at the start, restart of the extremities as stuck at Windows startup
No experience with the material for PC here. I am grateful to anyone who can help me understand this. I turn on the computer and I immediately get a position FF code and no display on monitor. I press the restart button and zip code will run successfully through all of the sequences up to FF, and I get a screen of the bios and an option to either do the startup repair or support Windows 7 normally.
If I choose the repair, I get nothing but a black screen.
If I choose Normal, the computer restarts (performs postal codes) and then gets stuck at Windows startup.
This allows me to access the configuration of the Bios via LED
This allows me to achieve advanced boot options but...
-safe mode is blocked to CLASSPNP. SYS
-Last good known Configuration shows a stuck Windows startup screen.
Can you give me an idea if I can and how to fix it?
Hello
Welcome to the Microsoft Community Forum.
According to my research, this problem may occur if the settings in the BIOS (Basic Input Output System) are changed. You can check the suggestions by macbionik.com , December 13, 2010 and check if this is useful to resolve the issue.
Laptop hangs at Classpnp.sys file.
Note:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk. Contact the hardware manufacturer for more information on changing the settings in the BIOS.
If the suggestions provided in the post above fails to solve the problem, run the diagnostic tool memory mode WINRE and check if the memory (RAM) installed on the computer works fine.
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
Do we know the State of the question, so that we can help you further.
Thank you.
-
Windows 7 does support ISO 9660 records on CD - R or am I stuck with Windows XP to do this without having to buy another program? can I use Linux to do? Impossible to get same bing to give me AN answer.
Hi Prince Eugène,
May I know what you're trying to search in BING?Yes, Windows 7 supported ISO 9660 records on CD - R.
For more information, visit the link given below:
http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use
http://Windows.Microsoft.com/en-us/Windows7/help/videos/burn-a-CD
http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer
I suggest you to connect with LINUX for other queries.
https://www.redhat.com/apps/support/
Thank you, and in what concerns:
Shalini Surana - Microsoft technical support.
Visit our Microsoft answers feedback Forumand let us know what you think. -
Outgoing message stuck in Windows Llive Mail
I tried to send two messages this morning. They are stuck in Windows Live Mail. I can't open Windows Live Mail; all I get is the small box, as if it sends a message. Green bar is completely to the right. no details are given as to why the message is not sent.
How can I clear it so I can access my e-mail messages that are stored and reuse the account?
Thank you
Ginny374
Can you get WLM to 'Work offline' and then delete any message sent half that may be stuck in your Outbox?
I have mail stuck in Outbox (Windows Live Mail - Windows 7). I am unable to open the mail program to delete unsent messages? Any help will be greatly appreciated!
http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail-program/i-have-mail-stuck-in-Outbox-Windows-Live-Mail/95a45f77-9e8a-4EF9-b802-6deb9fb337ff?msgId=10a3e59f-7517-4B80-8605-a54f67f855dbIt is old, but might be interesting to read.
Messages may be stuck in the Outbox when you use Windows Mail on a computer that is running Windows Vista
http://support.Microsoft.com/kb/941090#appliesToTake a look on this site
Welcome to OEHELP
http://www.oehelp.com/default.aspxIn particular, have a look at this utility.
-
Stuck on Windows Vista with Lenovo G550?
Hi, I am experiencing a problem that makes me not really get angry at the Service of clients from Lenovo and Microsoft at the same time. I use a G550 with Celeron 1.8 GHz CPU and 2 GB DDR RAM with HDD of 250 GB and G4500 Graphics
Here is my problem:
I was very happy when buying my laptop and couldn't wait to install Windows 7 on it. As I did, I realized very quickly that there are major problems with Windows 7 on my laptop, and I was not able to run my software. Games would not be executed, the programs would be would break and I felt duped in a way. That of why I thought then about XP, which is a very simple OS, but would at least run all my software on this laptop that I just bought. So I installed XP and I couldn't find all the drivers I needed, I was not able to run my WIreless LAN-network and in XP total is a piece of 9 years, of the software, which has many security problems and wont be adapted to a new laptop in this price category. I mean I spent $ 500 on this laptop, and then I find myself running XP on it? No thanks!
So I switched to Vista, that was my last hope, and that would go at least my applications, not the crash and updatable. And at least I could really use the ease of this laptop on Vista. But one thing that makes me really crazy crazy, is that I am lucky to have the worst performance with Windows Vista. I run SP2, needs renewed start as 40seconds without logon. Another extra 20 seconds for the loading of all auto-start programs (which are just that anti-virus and the usual system stuff). I have to be stuck on Windows Vista forever? I have so many problems with this operating system, but anyway its just more convenient than the old dusty XP and windows7 new crashy. Is it really this bad, that after having spent hundreds of dollars on a new laptop that I have to paste vista ot, to stay updated and use my old programs including windows 7 just does not work?
I think that his little irony that Microsoft does not solve their problems of incompatibility with computers laptops lenovo, and that Lenovo doesn't problems, that the experience of their customers.
I was very much surprised when I bought this laptop until I realized the problems such as:
Disc turn al the time
Incompatibility with Win7
Driver problems on the old operating system like XP
I think that lenovo ows really a statement and Microsoft should really tell us what we're going to get before we buy it. Money doesn't grow on trees, and I am not willing to spend much money on BONES and laptops which later used to work properly.
What do you think about that?
Mahdi
Hello... If the machine works fine now quiet... so do not touch
but I prefer to save... .on usb drive... If you have a seatbelt, if something goes wrong with it...
cordially KalvinKlein
-
Help stuck in Windows Server R2 2012 kernel mode
I have recently installed windows server 2012 r2, which turns out to be the right product, I was after and now can't get out of kernel mode and get stuck looking at the command line. I tried "Install WindowsFeatures Server-Gui-Mgmt-back running, but this only loads to 68% then fails because it cannot download the source files.
I want to delete r2 Windows Server 2012 and return to the old windows 7 I had installed. Are there documents, or methods of removal of windows server r2 2012 or restore my old windows, I would like to know please.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers) -
Acer laptop stuck on Windows 7 update 31 of 31
You just bought an Acer brand new and when I stopped it are stuck on update 31 of 31. I called Acer support and they said I have to reload Windows and that they won't support anyone who chooses to make updates?
I've just turned off and all is well so far.Hello
References to Vista also apply to Windows 7.
I guess that part of the question could be a driver which is really old or similar should not be loaded.
This exit Windows updates on (after you have access) and stop the updates of the driver to load.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx---------------------------------------------------
You can use the solutions in this KB - 3 methods and I listed a little help for them below
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature
How to do a startup repair in Vista and Windows 7
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlYou can also do a safe mode startup repair to access the Recovery Options If you have them available
or use the DVD as described above.This tells you how to access the system - Vista Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxThis tells you how to access the system - Windows 7 Recovery Options
http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questionsTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlMethod 2: Start the system in safe mode and then use the system restore feature
How to do a system restore in Vista and Windows 7
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can also do a restore of the system of starting with a disk of Vista or Windows 7.
Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
x 64 64-bit and even for versions of Windows 7.The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358------------------------------------------------------
Once you are in Windows I was running once again reset here as a precaution.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------
If necessary, you can get free reports of incidents.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxHope this helps sort it out for you.
Rob - bicycle - Mark Twain said it is good. -
Stuck on Windows ' update 7 orf 9.
My laptop was to install windows updates and turn off. He has been installing update 7 or 9 for several hours. I think he is stuck and I can't stop it, restart, or stop the update. What should I do?
Hi Sandy,I suggest you to follow the steps in the link and then check if it helps.
-
Windows 7 installation stuck on windows startup
I have a laptop pro 64-bit of windows 8.1 and I installed windows 7 ultimate on it, and when I run the installation from the cd it happens to a screen like this and he's stuck there. My laptop is preinstalled with windows 8, then I upgraded to 8.1 pro then have windows 7 ultimate and when I install it it gets to the windows startup screen and does nothing. so, how to solve this problem?
Decommissioning of laptop computers pre-installed with Windows 8 for Windows 7, you must disable Secure Boot.
I would recommend that also save your installation before doing so.
http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/
How to disable Secure Boot:
-
Stucks upgrade window 10 to 99%
After trying different methods...
1. using Get windows APP 10 - no sign download
2 Wizard upgrade Windows 10 - has taken so much time and stucks at 99%
3 reboot 4 to 5 times the force fully - error on black screen
Still no upgrade has been done.
It is better to create a new application for the upgrade in order to avoid this type of methods of trial and error.
Please help me on this
Review:
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:
Option 1:
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
How to create an ISO or USB drive.
Select upgrade this PC now and then click Next
Option 2:
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
My taskbar stuck overlap windows maximized.
My taskbar stuck covers the bottom of all my maximized windows. I will not hide my taskbar if I can help, I like my locked taskbar. But when it is locked, I can't access at the bottom of any window, whether it's a word document, my music player or my internet browser.
-
Stuck on Windows startup screen
My laptop is stuck on the screen whenever I turn it on. I tried to run in the vault makes it incapable of doing, I ran several restorations system and repairs to the system each which say 'not found no problem' or say a reboot is required, and then it gets stuck on the screen start up again. The windows symbol fades in and out, but the loading icon does not appear.
The laptop was working fine until recently, when I downloaded the free windows 10 update from the previous windows 7 OS. He said he would download in the background, but part-way through install my computer crashed. Since back on this problem has occurred.
I would appreciate any help with what options I have this result in minimum files lost, thank you.
Hello
Thanks for posting your question on the Microsoft community.
Thank you for details on the issue.
This problem may occur because of damaged or missing Windows startup files.
As repair and restore failed, I suggest you run bootrec commands and check if that helps.
Refer to this article:
Use Bootrec.exe in the WINRE to resolve startup problems
https://support.Microsoft.com/en-us/KB/927392I hope this information helps.
Please let us know if you need more help.
Thank you
Maybe you are looking for
-
How to clean my macbook air safely
How to clean my macbook air?
-
Satellite L100 113 - Linux distribution has recommended
Hello I tried to install Linux on this machine several times, and each time finished with an installation that will not work.Any recommendations?
-
What happened to my Time Machine backups?
I'm on Yosemite on a 2012 end Mac mini server, with an external HARD drive, I use for backups. The short version: I can "enter Time Machine" see my backups, but after restoring my system, my Time Machine configuration seems to have been lost and my T
-
Hello I MicrosoftSparkODBCDriver64.msi need a driver that is used to connect to Windows spark. I have a 64 bit windows 7 PC. I tried to download from Microsoft provided https://download.microsoft.com/download/C/C/1/CC102271-5CE8-4F5E-A1F9-6D97CAA734D
-
BlackBerry Z10 Help! My Z10 is dead!
This afternoon, my Z10 turned off and won't turn on. It is since in the charger then (about 3 hours) and none of the lights light up and does not start the screen upward. Acts like the battery is dead, but I'm not able to get even the icon to "rech