Stuck on blue screen with Rainbow clouds, floating section did not help.

Similar Questions

• sound not working - can't lift, I tried to fix it with Mgr. device but it did not help.

  I have trouble with Device Manager, but it did not help. I'm afraid to win 10 because of new problems, I do not want to download.

  Hello

  See if that helps you.

  Do a system restore to a date before you had this problem:

  "How to make a restore of the system in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

  __________________________________________

  Or go to the website of your computer/laptop or the manufacturer of the sound card > looking for drivers and downloads Section > equip your laptop model number > find your operating system > download and install the drivers etc you will find Audio.

  Also read this information from Microsoft and follow the steps there.

  'No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• Applications in the cloud creative section does not help

  I can't download apps on my computer, why?

  If this does not help, explain what you see in the applications tab.

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

• HP Pavilion HPE h8 - 1260t CTO: stuck at the screen with the words "Press ESC for Boot Menu" on the bottom

  I unplugged the graphics card to clean dust. After that I connected everything again, he stuck to the blue screen with the words "Press ESC for Boot Menu" on the bottom. If I press ESC at the beginning, it will go to a black screen and it will show the basic information of the computer (information about the processor and memory). It also show this black screen, "Press ESC for Boot Menu" on the bottom and it will show "Start menu" in the lower right corner. If I press F8 at the beginning, it's going to be the same black screen, but it does not "Start menu" show in the lower right. If I press F10 at the beginning, it will go to the same black screen, and it will show "setup" in the lower right. Can someone help me solve this problem? And thank you very much!

  So I suggest to look at the following and try to 'Clear the CMOS settings' as described at the bottom of the page: HP and Compaq Desktop PCs - specifications of the motherboard, IPISB-CH2 (Chicago).  Then see if there is no change at all.  If there is no improvement, then use the following http://www.hp.com/contacthp, fill in the form, create a folder for your question and then use the information to contact HP.

• Installation of Windows 7 recovery disk stuck on blue screen

  Hello

  I have the computer hp pavilion dv6 laptop. I am recovering my system with the recovery discs, I created.

  But he remained afetr windows logo on a blue screen with the mouse pointer.

  and whenever I tried to install other media then its shows 0Xc00000f error.

  What to do please help me.

  Hello akshay_p,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is stuck in a blue screen, it generates an error message, and I'd love to help you!

  As you restore your system with your recovery discs, I recommend later in this document on HP System Recovery troubleshooting (Windows 7). This will help you successfully perform a recovery of the system on your system.

  For more help, I'll need to know:

  product and model number your laptop.
  The bit version of Windows 7 , you are trying to install on your computer.
  If your computer has completed all its important updates of Windows.
  If you have updated your drivers from HP the HP SupportWizard.
  If it is a current or recent problem.

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!
  
  Concerning

• BlackBerry Z10 stuck on blue screen

  My Z10 won't restart. It gets stuck on blue screen after trying to remove the battery. Have also tried long-pressing the power button with volume keys simultaneously.

  I had to use the BlackBerry link to reload the software. That reset the handset to factory default - I then did a software upgrade. Phone seems to work fine except it will reboot now and again... I give up!

• MacBook Pro screen displays a blue screen with the vertical line

  Hi, I have a problem with my macbookpro. When I try to start, the gray screen load with the apple logo and then turn to blue screen with vertical crosshairs.

  It would be useful that you mentioned EXACT model/year of your MBP and the current OSX.

  Ciao.

• Toshiba 32P2400EE - blue screen with message mono

  I have a toshiba tv LED serial number 32P2400EE. Accidentally when you press a button on the remote, it shows only a blue screen with a message of mono on the upper left.

  Please provide assistance.

  Hallo

  Have you tried to resolve your TV back to factory settings?

• WANT to PC dv7: at startup, I get a blue screen with a :( Your PC has encountered a problem and needs to restart.

  While I was using my laptop I received a message that HP was running some sort of program disagnostic and in the end, he asked if I wanted to repair the problems. I declined the offer. However, the next time I turned on the computer, I saw the first time the HP logo, then the message "automatic repair Preparation". After a few seconds there is a short rectangle that flashes on and disappears. Then I got a blue screen with: your PC encountered a problem and needs to restart. We will restart for you. "Who starts a blue screen and reboot cycle. Blue screens replacement error messages saying: "If you want to learn more, you can search online for later for this error" and once it will say 'FAT file system' and once 'NTFS file system. I have spent to support HP dv7 ENVY page and tried the suggestions of repair without success. Is it possible to go beyond these two error messages and their blue screens to get my system working again? If so, how?

  Hello

  Error code 24 characters is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  It is also consistent with your description of the problem.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are no longer under warranty, it's a fairly simple procedure to replace the HARD drive yourself - a brief guide on this is below.

  Readers on the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  1 TB laptop hard drive.

  The procedure to replace the hard drive begins on Page 56 of your maintenance & Service Guide.

  About reinstalling Windows 10 on new HARD drive, as long as the previous installation of Windows 10 had activated Ok after upgrading to Windows 7/8.1, you can simply create your own Windows 10 installation media and perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I have not a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Stuck on blue screen again.

  Skype for desktop PC 6.21 is stuck at the screen "signing in. It happened first a few days ago, after I uninstalled and reinstalled Skype. Then, it worked fine, until that earlier.

  My updates Windows Installer automatically. I use IE 11. I have downloaded and run the file "cleaning connection", did not help. I don't want to uninstall and reinstall Skype each time that it gets stuck. Help, please. Thank you.

  Given that Skype uses IE IE background do some interviews:

  Reset the Internet Explorer settings:
  http://support.Microsoft.com/kb/923737

  Clear IE temporary files:
  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-temporary-Internet-files

  Erase Windows temporary files would be wise as well:
  http://www.PCWorld.com/article/2143502/Windows-8-1-Update-Tip-clean-up-that-disk-space-now.html

  If the problem persists, restart in Mode safe mode with networking to see if it works correctly there.

• Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

  For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

  Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

  So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

  Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

  Hi @kootstra,

  From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• Satellite A350 - blue screen with error message

  At the start of windows7, I get a blue screen with error message 0 x 0000116.

  Can someone help please?

  It looks like a graphics driver is a troublemaker. Try to reinstall a graphics driver in SafeMode (f8 at startup). Read this article for more information:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/eb584685-6b8b-4ad7-B6CC-ae5ee78095fb

  It is for VISTA but should be the same for win 7 too.

• Blocking of blue screen with the analog voltage (WinXP, PCI-6251)

  Hello

  I'm looking to solve a problem of blue screen with my measure blocking
  application, which I am developing with C++. Blocking seems manifest
  a little random after a variable amount (500-50 000) of voltage analog
  measures. My application needs to make a huge amount of these digitally
  trigger voltage measures after a certain period of time, and I'm using a
  unique
  task to do. The task is stopped and started after a single measure
  is
  which is done around 10 000 - 100 000 times per second. For this
  because I do synchronized with the PCI-6251 map data acquisition and
  one
  Ztec oscilloscope card. It seems that the probability of blocking could be
  associated with
  the frequency of measurements of voltage that I perform.

  The
  the app itself is multithreaded, but I'm blocking concurrent access
  TO
  the card with lock - all access to the card are behind a single mutex

  lock, so simultaneous access is blocked. In any case, all data acquisition
  access
  o the map is initially a single thread, which is dedicated to the acquisition of data
  operations.

  I also did stress tests with Ztec scope map, which does not
  result
  in all the problems. I also disabled in order of acquisition of Ztec map data
  TO
  Make sure that it wasn't the card scope, the origin of the problems - the problem
  persistent, so this seems to point towards the direction of the nidaq map.

  The deadlock appeared when I used the original supplied with drivers
  the
  card. I installed the latest drivers (removed the device from)
  ' Windows
  Device Manager and your application Measurement & Automation, reinstalled), but the blue screen still appears.

  Blue screen gives me a few debug data, but it does not mention any

  files .dll or something that would be of course point to a specific file (driver). I enclose at least partially matching code snippets.

  Hello again! I've been in contact with a local support person, who suggested that I have use DAQmx_Val_FiniteSamps instead of DAQmx_Val_HWTimedSinglePoint. I don't have any other changes, but this (see below) and the problem disappeared, so this seems to be an acceptable solution, because I don't see at all why not do this way. (Thanks Henry!)

  DAQmxErrChk (DAQmxCfgSampClkTiming (task_reader, NULL, 100000.0, DAQmx_Val_Rising, DAQmx_Val_HWTimedSinglePoint, 1));
  DAQmxErrChk (DAQmxCfgSampClkTiming (task_reader, NULL, 100000.0, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, 2));

• Wallpapers flashes a blue screen with a desktop screen

  Product: HP ENVY TouchSmart 15 t-j000 Select Edition CTO Notebook PC, model C9G48AAR, product number: C8P45AV
  Problem: Once connected, the screen flashes start screen randomly and does not respond to any input.
  Effort: We followed the instructions on the HP web site for this symptom (desktop screen will Flash between a blank blue screen with a task bar and a desktop on startup (Windows 8) computer screen), but it failed at step 8 - start screen flashes in Mode safe mode with no way to find or enter step "Control Panel." We have also restored the system to the last restore point, reinstall the memory and reset the BIOS - all the HP recommended processes for video problems.
  Current situation: we have yet to solve problems via the web HP site first; This has left us speechless. We went to the "Contact HP" to discuss with the service agent, but discovered that our warranty expired a week ago. We were directed to the help forum. The laptop is my son and is used for his college course. We need to help, you can provide as quickly as possible. Thank you!

  I have advanced and complete steps 8-14 in the correction procedure from HP, including the center of the Action to "never check solutions" are reduced to problem reports. Then we went ahead and made the Microsoft Updates that were pending since we had it restored to a previous restore point. So far so good! The flashing screen problem is not returned. Until that Microsoft published a fix for this problem, I think that bypass it HP will keep us to leave. Thank you!

  Could I ask a favor? A HP contact named Mason was initially to help us with this problem, but all attmepts to repsond to his e-mails ended in a failure to deliver ("Diagnostic - code 554).

  Case No.: 3008737217
  Mason
  Case manager
  Team of HP AMS TCO

  Can you communicate with him and let him know that the problem has been solved successfulkly? Thank you!

  Warn the looks!
  Bryan

• Blue screen with the error code and I have no disk recovery for HP Pavilion dv6-1260se

  I have a HP Pavilion dv6-1260se with operating system Vista factory installed. When you start the computer, I get a blue screen with this error message: STOP: c000021a {fatal system error}.

  The verification of a KnownDLL failed.  process ended unexpectedly with system

  a status of 0 x 0000221 (0x007fb9c0 0x00000000).

  The system has been shut down.

  I don't have a recovery disc for this computer.  I tried to order them, but they seem to not be available.  It is my daughter's computer.  She said she started having problems after you download Frost Wire (music sharing), and then she took.  We tried to go back to a bygone era and that did not help and then the blue screen with error message appeared. What should I do now?

  Hi Yprlvr

  It is not possible to download records from the web site, but you can order and they will send you the discs for you.  If you can get another option using F11 to work and get the restored system this way, you can make your own recovery disks (assuming that you have not already done on this PC, what a game can be made by PC).

  R