stuck on 'check updates'

at first my update of windows would not boot at all, but that has been resolved. Now if he pulls up and keeps are 'check updates' part. I tried to just let it go, but after about 4-5 hours, I finally gave up. There is no error messages or slowdowns in performance of any kind and I'm on a connection fast broadband. Help, please

I put the BITS service manual and automatic windows update and it worked

Tags: Windows

Similar Questions

  • iPad stuck on checking update to 9.3.1 since about 21:00 last night. Help!

    iPad stuck on "checking update" since 21:00 last night. Help!

    Take a look at these articles:

    Solve the iOS update and restore error in iTunes - Apple Support

    Get help with iOS update or restore errors - Apple Support

  • Impossible to update of Windows and other software (stuck at 'Check updates')

    My laptop cannot update windows, it get stuck at "Checking updates...". The same thing happens if I try to update other software, including antivirus software. That they be stuck all trying to update or to tell me that they cannot connect to the server.


    Thank you!

    Hi mariusov,

    Run the tool for troubleshooting under construction and check if it helps, here is the link, you can see: the problems with installing updates:http://windows.microsoft.com/en-us/windows7/Troubleshoot-problems-with-installing-updates

    Try the steps listed in the link below: you may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates: http://support.microsoft.com/kb/836941

    Thank you, and in what concerns:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Update stuck at 'Check updates'

    Original title: Windows Update stuck

    I had to recover my laptop windows 7 back to out-of-box state system. Once presented to my office, I immediately went to Windows Update to install all of the updates that I needed. After installing SP1, and restart the computer, windows update to update the update agent, so he could get some more updates. He said he would close and re - open Windows Update, which she did, but now it is stuck on "check updates".

    The update that broke the update of Windows was "Windows Update Agent 7.6.7600.320"

    I have since made a recovery of the system to the State out-of-box three times and each time "Windows Update Agent 7.6.7600.320" installs Windows Update is stuck saying "check updates".

    I did tons of attempts to solve this problem, but it won't find more updates and I can't install more updates.

    I have also experienced problems with Windows Update still looking for updates when Windows Update 7.6.7600.320 has been installed automatically after the system update to SP1 (it was after doing a clean install of Windows 7).

    The following worked for me:

    1. manually installing KB3083710

    2. manually installing KB3102810

    3. restart the computer

    4. run the Windows Update Diagnostic tool to reset Windows Update (support.microsoft.com/en-us/kb/971058)

    5 restart the computer again and search for updates

  • Upgrade Windows 10 stuck at 'Check updates'.

    Recently, I started the download for Windows 10 using 'media creation tool. When the Setup program is started, it got stuck on "check updates", it's over an hour now and it is still stuck at 0%. What am I supposed to do?

    There are actually two options in creating media tool:

    • Update this PC now: Automatic Download, Installation.You don't need to do anything. You try this option.
    • Create an installation media for PC:Download an Installation file. When downloaded and opened, you find a setup.exe to run the Inplace upgrade. Make sure you only download the installation media according to your system.

    Windows 10 ISO download - Windows 10 Forums

    Use method 2 from here and follow as said.

    Use the recommended options for this PC check that you use the ISO to improve the current system. Skip step 6.

    Then after the download is complete, you must run the Setup program to upgrade your system. This is the guide:

    http://www.tenforums.com/tutorials/2267-Windows-10-upgrade-installation.html

    Method 7/Step 7 must be followed.

    Uncheck the get the latest updates for Installation (select yet) in the first screen, which would skip this step.

    Let us know if you need any other assistance

  • Windows Update stuck with 'Check updates'

    Separated from this thread.

    I have also the same problem rmahmud28 is seen except mine is Windows 7. He is stuck with 'Check updates' and I've already updated the Windows Update Agent. I tried some other stuff, like your FixIt tools, but nothing.

    No idea why or how... the problem was solved by itself. Looks like I have left no system check all these 300 updates available for download.

    Thanks anyway

  • Windows 7: stuck on "checking updates...". »

    Before you answer, keep in mind that I tried the following things:

    1.) downloaded and installed "WindowsUpdateDiagnostic.diagcab" so that the system is set. It did not work.

    2.) tried the selected responds Vinod Mr proposed on this page. It did not work. (This is to turn the update services / BITs, renaming 2 slots to * .old, and then turn the services turn it on to reattempt the update checking.)

    (3.) I also tried the approach of the selective startup with my Symantec Endpoint Protection and this is to switch off the corresponding services. It did not work also.

    This has been the most frustrating experience I had with Windows 7. I do all this in order to update my display drivers, but to do this, I have to make sure Windows is up to date... who apparently can't do because it gets stuck on "checking for updates... »

    Can someone, maybe Bill Gates himself, please shine light on it and help out a young man?

    Thanks in advance.

    Use these links:

    KB3020369 64-bit

    KB3172605 64-bit

    :)

  • Update to Windows 7 stuck on 'Check updates'

    I've updated 31 updates yesterday because it had not been done in awhile and now it is stuck on updates. I tried some responses on this site but had no luck.

    Install the latest version of the Windows Update, in KB3172605 client included.

    https://support.Microsoft.com/en-us/KB/3172605

    Set automatic updates to 'never check updates' and restart Windows before installing.

    Best regards, VZ

  • update to iOS iPad 2 stuck on "checking update". Cannot continue

    I have updated iOS on my Ipad2 last night and this morning a pop-up window displays "Check update" with the circle of rotation, then the screen goes to sleep after about 3-5 seconds.  In a loop that never ends.  That's in the same state that it was this morning.

    Try to reset the unit: hold the home and power buttons at the same time and continue to hold until the Apple appears (compared to 30 seconds - really). If you see the Apple reset is underway and the Slide to Unlock screen will display shortly. Once it is up, go to settings > general > about and see what is display Version.

    See you soon,.

    GB

  • Updates Windows 7 - stuck on 'check updates'...

    I have a HP desktop computer.  Running Windows 7 Home Premium.  Recently upgraded to the 10 Windows (while it was free).  Discovered that even after the analysis of compatibility says 'OK' I had to call Microsoft for more help and told me that my computer was not compatible.  Asked why the analysis said it was.  No real answer not followed.  Little has been said to restore to Windows 7.  After that I have known issues.  Before the update of window 10, this computer has been running great!

    in any case, I noticed recently that my computer is not updated.  When I go on ' check for updates ', it just stays on that.  The status bar does not move, but just on the 'check updates' for days.  The only way to stop it is to restart the computer.  But I know there are updates because my other computer is up-to-date (did not upgrade Windows 10 - but is currently running Windows 7).  So, I have sen the videos and articles on remove and clean up the folder "Software Distribution".  I did it several times and it DOESN'T WORK.  At one point, I decided to do a factory restore.  Took the computer to update 1.  At ran Windows Update and found 16 available updates and other things to seem to be good.  But noticed once the "Service Pack 1" has been downloaded and installed the Windows Update is blocked again.  So, I'm lost here.  What can I do?  Is there a solution?  Or should I trash this computer and buy a MAC?  Questions please ask.

    Help, please... Thank you!

    See this thread and perform the steps exactly.  I did the following steps on several computers and they work.

    Windows Update solution

  • < RESOLVED > Windows Update stuck on 'Check updates,' error 80080005

    Hello

    I recently acquired a laptop and, after a few minutes of use, realized that Windows Update does not work properly. This laptop used to be a cell phone company and did not use Windows Update in the workplace, instead of Microsoft System Center Configuration Manager (SCCM). This laptop is a Lenovo ThinkPad T410, gives me the error code 80080005 after a few minutes of the test check the updates. I tried searching the Internet and followed all the steps given here. I'd appreciate any help and wants to avoid the new image of my computer.

    Thank you

    Data sheet:

    Model: Lenovo ThinkPad T410

    OS: Windows 7 Professional (SP1) x 86/32-bit

    CPU: Intel i5 2.53GHz

    RAM: 3 GB

    I solved my problem, but I don't know how I did it. Thanks for your help!

    jrusso01

  • Update W7 stuck on 'check updates'

    Looks like a lot of people have this problem and I'm one of them. The computer has been idle for 6 months and when I try to update, it crashes at updates. Looks like it's also prevents me from upgrading to W10. I tried the troubleshooting update W but if fails to correct any problems. Does anyone have a solution?

    Hello

    If you can't get Windows 10 to get 10 app windows or Windows update, you always have the option of ISO to upgrade.

    Download Windows 10 media creation tool

    Simply select this option of PC/improvement.

    After you download the Windows 10 installation files using this tool, you can upgrade your existing 10 Windows operating system, or you can create the bootable USB drive or DVD to install Windows 10 key later. You can also save the installation files to the ISO in offline mode file format, if you wish.

  • iPad stuck on the update check and won't restart

    Tried to download the latest update and now the iPad is stuck showing "check update". I tried three times to restart now start and home at the same time buttons for 10 seconds or more. Nothing. didn't budge. Any advice?

    Thanks in advance

    Hello

    Hold the home button & menu button for up to 30 seconds.

    See you soon

    Brian

  • Windows Update is stuck look for updates please help

    I get very frustrated because one of my programs usually open unless I do an update of the platform, but when I try to update my computer is just stuck to 'check updates' and its been like that for more than a day. I don't know what to do, I called the support microsoft product, and even that they did not help. This is a new computer with windows 7 pro. Please help me I am very frustrated.

    3020369 is only a prerequisite for the KB3172605, a criticism:

    https://support.Microsoft.com/kb/3172605

    Best regards, VZ :)

  • 'Check' updates from Windows Update is stuck after that I have reset my laptop

    I refreshed and reset my laptop but it will always get stuck 'Check updates' and everything works so slow... than ever before.
    Is this a problem with my hard drive?

    OloberSaiko

    Sorry, but your reset laptop reset Windows Update.

    I recently had to do this in one of my PC and it took three days complete (!) for the Windows Update process finish.  One day find updates, one day to download and one day to apply.

    To add to the frustration, during downloads, progress 'freeze' to zero percent!

    So, I had it got stuck - but she didn't - and this is important!  Go to C:\Windows\Distribution.  If there are files and folders, Windows Update works, it is simply not updated status information.

    You can check that from time to time, and while its download yet, he will continue to grow.  As long as there are files and folders there DO NOT shut down your PC!  This will force again when you reboot.

    Sorry... but you just have to leave it on and it will run its course.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

Maybe you are looking for

  • Firefox won't open any search with a search engine query. All are UNTRUSTED.

    I run the operating system MS Windows 7 Premium with Kaspersky as my security software. Then checked again. It seems to be security settings of Firefox and not Kaspersky causing the problem. Just in case it's Kaspersky, I added Google as an exception

  • Pro more than 8600 copies and put the output in reverse order

    8600 pro more When copying this outputs printer copies back to order before.  Is it the way it is supposed to work?

  • Re activate personal cloud ix2-3

    I configured a personal cloud on an ix2-3. I switched it off, but how to turn it on again. When I select peronal cloud in the Manager of I can't find a possibility. I can only create a new or connect to antother cloud... pls help

  • recovery stops at 2% with error message "1005".

    My neighbor gave me his Pavilion dv5 - 1044ca to watch. She said she had fixed 2 years ago and never it has never worked since. When I boot it it reads "No device detected - start insert the startup disk and press a key" think there is a HARD questio

  • Scanner not recognized on HP6500 E709

    Everything works fine on my 6500 - EXCEPT the scanner.  I'm not either of my computers to recognize.  I've uninstalled and reinstalled four times.  I unplugged the power for several minutes four times.  I checked and rechecked all cables.  The printe