stuck on this screen

Similar Questions

• laptop is stuck on this screen enter password administrator or power password

  Hello! Can you help me. Laptop is stuck on this screen. The key that I receive after you have entered the wrong password 3 times is 55622431 I have a laptop of hp 2000

  Hello

  Enter: 40780417

  Kind regards

  DP - K

• "We could not all updates. Undo changes. Do not turn off your computer. "Stuck on this screen. UGH.

  I am extremely frustrated.

  I recently bought a Toshiba Satellite laptop. It works fine, until today. My computer tried to update and in the process, failed. I wait now more than 4 hours on the same screen. Pressing F8 does nothing. I tried to restart. I can not open troubleshooting because the computer is stuck on the same screen. The circle to show that it is loading is always in motion and my mouse moves as well. I called MIcrosoft support and they told me to reboot and wait. It is, I already did, but they told me to do it again. I have some files I have would be broken lose. Help, please.

  Hello

  If you don't mind not to lose your files, turn the system off.

  Turn off the computer.  The next step, you will hear a shrill signal strong.  Be prepared.

  Press 0 (zero) key and power up the computer

  Key 0 (zero) when the recovery warning screen

  Press the F12 key during the appearance of the Toshiba logo

  You should then see the Start Menu

  Using the up/down arrow keys, select > HDD Recovery > press Enter

  If offered a selection of Windows 32 or 64-bit, be sure that you select the correct operating system

  You should be able to create a recovery media.  Once you have installed Windows, click Search > Type recovery

  You should see an option to create your own recovery discs

  If this isn't the case, I suggest that order you them from Toshiba.

  http://forums.Toshiba.com/T5/system-recovery-and-recovery/recovery-media/TD-p/9148

• Someone changed the use name and password on my desktop and I can't fix it, because it requires a usb or floppy disk and I'm stuck on this screen

  I tried to change the password, but it is up to the original screen after reboot.  I can't even uninstall and reinstall.

  Hey Pewter29,

  You should ask the person who changed the password for more details. Reset disk of normally using a password, you can reset the password. For more help with this scenario, see:

  What to do if you forget your Windows password
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer is stuck in the screen that lets you choose Safe mode or start normally

  Original title: stuck

  My computer is stuck in the screen that lets you choose Safe mode or start normally. When I choose that it just goes back to the same screen. stuck in this screen

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• V5061u stuck on test screen

  I bought a camcorder 1080 p hp v5061u and barely got to use the * beep * thing because a day after only 4 or 5 times I go to for use and notice that its stuck on this screen test. There is no obvious way to exit it and return to normal use. It took absolutely no damage what so ever and malfunction and it really seems to just HP cares! I sincerely from the bottom of my heart feel fuzzy and just left to dry with this problem! I can understand another type of malfunction happening and the problem is more complicated when I wouldn't be able to get all the assistance, but he simply blocked on this screen to test randomly and nobody has an answer for me! I spent all this * beep * money on this unreliable product of HP that does not even get 1 year use! And google it many people have this same issue with this HP product!

  Hi @bino313

  I saw your post and have passed to the right people for their review. We will contact you by private Message on this Forum.

  Kind regards
  George

• iPad2 9.3 upgrade stuck at the screen of the unavailable activation server

  I tried an ota on my iPad update 2 and it is stuck on the screen of activation with an error message - activation server is temporarily unavailable. tried rebooting, connect to iTunes - nothing works... Any help on this would be welcome.

  BTW... my iPhone6 and mini ipad updated very well...

• x 305-q706 Stuck on splash screen where is says "Qosmio" with please wait...

  Hello

  recently purchased a Qosmio x 305-Q706. First time I booted up it gets to start with Qosmio screen displays with "please wait" down and hangs there forever. The only way I can get it to boot is to start cold and purée the key F12 for is loading from the startup screen, if I'm lucky, I can enter the option where you can choose which startup device, and if I manually chose the hard drive I can load windows.

  Someone at - he heard of this problem or how to fix it? I tried to change settings in the BIOS nothing. Re-iterate, it is stuck on the screen with Qosmio pslash, and if I press a key on the keyboard once it says "Please wait...". "he brings me just to the bios: (.)

  Any help would be appreciated.

  Hello

  This is a very stupid situation and I really don't understand why the laptop hangs at this level to start.
  Is somehow your Qosmio confused and cannot decide which device should be the first boot device.
  What is some external device connected to your Qosmio laptop?

  Maybe update the BIOS can help, but if you have all new laptop is not the solution. This is more recent laptop, and I presume that there latest version of the BIOS. So, if I were you I would contact either your dealer and ask for replacement or Toshiba service directly. This behavior is certainly not strange and laptop crashes somehow on the BIOS/POST (Power-On-Self-Test).

• Laser Jet MFP M127FW Pro: Will not stop "hologram fax page 1" and is stuck in this mode

  I have Laser Jet Pro MFP M127FW.  This morning, a fax came through, and printed, however, the touchscreen rpet ' Print Fax: 1 Page, "with absolutely nothing to print.  I can now no longer print documents, or send and receive faxes again.    When I leave on this screen, the message disappears and comes back about a minute later for inactivity.  I tried to unplug and plug the unit in the.  I tried to use the switch to stop the machine.  When the powers of the slot machine, he will immediately return to the ' print fax Page: 1. " I tried clear memory and also the power resets. I keep reading on a Ret NVRAM and I would try it, but can't find anywhere it is displayed!

  It is a real problem for me because I use the fax machine throughout the day!  Can someone help me?  Thank you so much in advance!

  Hey @nhorn1115,

  Welcome to the Forums of HP Support!

  I understand that you have a fax job that will not print from your printer Laserjet M127fw range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. When done, remove the cable from the back of the printer's fax. Now:

  1. Click on the configuration icon that looks like a key.
  2. Click on Service.
  3. Click Fax Service.
  4. Click clear saved faxes.
  5. Connect the cable of the fax.

  Please let me know if this clears the stuck fax. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• The Windows Setup program does not open. Stuck with black screen.

  Hi all

  I'm trying to install windows 7 from an iso file using Bootcamp assistant, Version 6.0.1 but unfortunately just windows installer does not open so I'm stuck with this black screen. I left my sit MacBookPro autour with this black screen during more than half an hour and after awhile, it gets really hot so I interrupted the "process."

  I have reset the NVRAM (command + alt + p + r) which did nothing.

  I followed the instructions of bootcamp. I downloaded the correct drivers for my model of mac pro book, I created a bootable and partitioned my drive.

  The forum has a lot of "black screen problems" but none of their solutions worked for me.

  Any help would be greatly appreciated!

  Thank you

  1. leave BCA creates the installer from USB, but not to partition your drive.

  2. download the correct drivers to install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support and replace $WinPEDriver$, AutoUnattend.xml, and the entire folder on the drive flash USB2 Bootcamp.

  3. run BCA, connect the USB cable and click only the Windows Installer and test if the Setup program starts.

• Stuck on the screen of HP recovery and cannot start windows

  HP Pavilion
  Model: 17 - 1215dx
  
  If you need the serial number or the fn, just ask. I didn't post too much sensitive information.
  
  It was originally 10 64-bit windows... but now has 8.1 Windows 64-bit
  i5 8gig of RAM processor
  
  Literally just close the lid and open it upwards and it wouldn't boot windows. It is stuck at the screen HP saying it's diagnose my problem. Tried a soft reset and a hard reset when you remove the battery and put it again while it is unplugged. Did not help. I can't start in safe mode. I tried to do a restore which has been a success but it restarts when he says "there was a problem, restart your PC. I'm frustrated and reset a factory and the same factory reset was successful and was when he came back to 8.1 because it's the OS, I bought it with but then it still wouldn't let me in windows. I was going to try and start to repair, but if I had known this would require an administrator I'd never have done the factory reset. I know I've been reckless, but I just wanted to work. But yes, I don't know what the problem is. I feel like if it was a hardware problem is just something to keep windows to operate. Should I try a repair disk? Would that help?

  The SecretLight

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post you need to grab your laptop and wanted to help - but we need more information.

  You said that your laptop came originally with Win10, but then later, you said you tried to go back to Win8.1, you can then said, it's the original OS.

  So, who was the original - Win8.1 or Win10?

  Ask because if it came with Win8.1 and you UPGRADED to Win10, while Microsoft tells you that there is no risk in the upgrade of Win10, because they allow you to believe that you can always go back to your original OS and setup within 30 days, the ugly matter faction is that the Win10 GoBack feature turned out to be unreliable - and when it fails She can let the machines in a corrupt State - which is not always the case, it happens often enough to be a problem, but you will get no warning beforehand that he goes to the trash your PC!
  
  The Win10 upgrade is known, in some cases, corrupt the partition of recovery that are stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.
  
  What will work restores your computer to its original factory state using HP recovery media. It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Lenovo Vibe Z2 Pro stuck at splash screen

  Hello

  I have the Vibe Z2 Pro and have the version of LINE of 271. Today, I got the OTA update message and tried to install the S277 update. But I wasn't able to do. So I phone reset and now phone is not booting. It stucks at Lenovo screen logo and nothing happens. I did the factory also resent by presseing low volume + powere but no help.

  Please help me to restore the phone. As in samsung phones, there are mode of odin. Is something like this for lenovo. ??

  Earlier, I rooted my phone and installed TWRP recovery. Then S277 update I removed the roots and tried to install the udate, but it failed. Please help me.

  Kind regards

  Mandar

  Hi guys,.

  I have soved that problem using Qualcomm Flash image program loader (QIFL). Its pretty simple. I had the original ROM and follow-up instruction as per

  http://www.androidbrick.com/ultimate-Qualcomm-Snapdragon-unbrick-guide-Snapdragons-are-unbrickable-q...

  This guide is the base LINE for K920

  I got my phone revives and then updated to the latest version of the LINE-S277. No problems atall.

  Hope it helps you too.

  Kind regards

  Mandar

• Help! My Apple Watch is stuck on the screen of weekly activity

  Hello

  My Apple Watch is stuck on the screen of the weekly activity. I tried setting down, I tried the button dial spinning and nothing. There is no done either button. Do I let my Apple Watch lose all batteries, or is there a way to solve this problem!

  Hello

  There should be a link to the upper left corner of the screen.

  Even if you don't see (after verifying that you have reached the top of the summary page), try to tap into this area to exit Preview.

• Backflip stuck on reboot screen

  my motorola backflip is stuck on the screen of the reboot logo bike I tried the hold to the camera during boot and press volume down, but it freezes and IM writing this sound still frozen so I do not know what to do? Can someone help me

  Send to Motorola they should give you a new one. That's what I'm doing because nobody will help with something like that

• Stuck at the screen of the POST - R500

  I have a R500 that one of my users has me just. It is stuck on the screen of the POST (ThinkPad splash) and does not respond to any keys pressed. I tried holding down the blue button "ThinkVantage" while turning on and still no response.

  I pulled the hard drive and plugged into another machine to be excluded as a possible problem. Which works very well. It seems that the system must be suspended during any of these POST I can't even access the start menu or the BIOS settings.

  Any help would be greatly appreciated so that I can get this user online.

  A quick search on Google and I've already found my solution. A broken USB port is to blame. Looks like it's a problem on early model R series machines. Here is a link to the post where I found my solution.

  -Kris