Stuck to the 65MBPS WiFi speed

Similar Questions

• My wifi speed went down after the installation of windows 8

  After download of windows 8 on my laptop wifi speed went from 25 Mbit/s to 0.2 - 0.5 Mbps, on my other laptop speed is always 25 Mbps, I get two different speeds with two different laptops in the same room, my laptop is a Hp Envy 6 1048ca

  Hi AshifChowdhury

  
  I'm glad to know that you have published the application in the Windows 8 Forums.
  
  According to your description, you have a problem with the Wi - Fi is slow after installing Windows 8.
  
  I understand that it must be frustrating, but don't worry, we are here to help solve your problem and guide you in the right direction.
  
  We begin with a question.
  
  Did you do changes on the computer before the show?
  
  Now let us perform some troubleshooting. All steps are carried out systematically and in order.
  
  Method 1 - I wish that you run the network adapter troubleshooter.
  
  First of all, try to use the network adapter troubleshooting utility to automatically find and fix some problems. This troubleshooting will be disable and re-enable the adapter and try a few other common repairs:
  
  Open the network adapter troubleshooting utility by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Press or click Network and Internet and then press or click on the network map.
  
  Refer to this link also
  http://windows.microsoft.com/en-US/windows-8/fix-network-adapter-problems.
  Make sure that there is no interference between the router and the computer.
  Sometimes interference like cordless phones, thick walls, and other wireless devices can affect the speed of Wi - Fi.
  
  Method 2-
  I would have you look at the article-
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Hope the above information helps.
  
  Do get back to us and let us know the State of the question in the case where you need further help or your next post. We, at tender Microsoft to excellence.

• Speed setting is grayed out and stuck on the slow mo

  I use the iPhone 6s and I shot some footage in slow mo.

  I then added clips from high refresh rate both the line however, they are all stuck on the slowest setting and the speed is grayed out.

  I restarted the phone and created new projects without result.

  Hi Ryan,

  You do not have something wrong. This is the expected behavior. Now Clip you cannot change the speed of slow-mo clips.

  If there is a feature you want to see added, feel free to start a new thread on the forum.

  Best,

  Peter Garaway

• IPhone crashed the Middle updated and now stuck on the setting of the screen!

  My Iphone has been unusually slow. So I tried to update my phone I thought it's maybe the old version of the IOS that makes my phone lag (I think I downloaded the latest version, 10. something). While trying to update my phone, it crashed at halfway. Now I'm stuck on the screen that appears when your phone has been updated (white background, that invites you to enter the password and put in place). However, after putting in my access code and attempts to connect to the wifi, my phone indicates that the wifi password is incorrect, this is not. Also, when I try to connect through mobile data it shows that "your phone could not be activated because the activation server is not reachable. Try to connect your iphone to iTunes to activate it, or try via the mobile connection in a few minutes... ». As a result, I tried connecting to ITunes and I got a different view of error message saying "ITunes only could not connect to this iphone." An unknown error occurred (0xE8000015).

  Help, please!

  Try If you can to update or restore your iPad, iPhone or iPod touch - Apple Support.

  TT2

• photos of e-mail stuck in the "Outbox".

  I had strange problems with my new iPhone SE.  This is one of them.

  I have a Gmail account set up on my iphone.  He sends and reads e-mail very well.

  but when I try to send a photo to the photo app, it does not send the photos sometimes and it seems to be archived in the "Outbox" until I open the mail application and check the Outbox:

  1. open the camera app

  2 Select the picture I want to send

  3. click the icon "send to."

  4. Select "Mail" and put in e-mail address to send

  5. press on "send".

  6. choose the size of the photo (I tried small, medium, large... all the same results)

  6. I get a 'discharge' sound, saying: it was sent.

  but sometimes the e-mail message is not sent immediately and is cached in the Outbox.  Thus, after having, like, 10 minutes (time to allow any slowness in the network), I check the Mail app, go to the mailbox and look "Outbox", I see that it is an unsent messages stuck in the queue.  but when I opened the "Outbox" I briefly see the email with the photo accessory and then erased immediately...  THEN receives it.

  This seems to happen most often when it is not on any WiFi network but only on the cell network.  but when I'm on WiFi network, or when I turn off the WiFi on the phone, it seems to send photos.

  Any idea what might happen?

  Not much on Apple forums, but on the Android forums - it is reported as a problem with the servers of Google se

  Don't know why it would be a problem with cell phone but work with WiFi

• iMac 8.1 stuck on the apple logo

  Model: iMac8, 1

  2.66 GHz Intel Core 2 Duo

  At 2BG memory when the problem started

  Mountain Lion 10.8.5

  Is in trouble with occasional frosts. Would be closed and it should restart very well. About 2 weeks ago, the computer froze. I shut down the computer and restarted. The apple logo came with the spinning wheel, and then just the apple logo.

  I can start safe mode. Tried resetting the PRAM, reset of SCM. Tried to start with all peripherals except keyboard and mouse disconnected. Use the command R to start the computer and went into the disc utilities. Disc checked and it said disc looks OK. Verified permissions. Mistakes came for iTunes more a warning which was not repairable. Fixed permissions. None of these permits to start properly.

  Parle talked anyone computer repair who suggested to unplug the computer, hold the power button while up to one minute, plug the computer back in and pressing the Start button. It came in fine. A few days letter that the computer froze and I had to stop it. You press the Start button, got the spinning wheel, so only the apple logo and apple logo. Start the computer by pressing command + R and reinstalled Mountain Lion. Installation once it stuck at the apple logo again. Active disk. Drive seems to be OK. Permission verified. Permission with iTunes but issues no warning this time. Repaired permissions. Nada.

  Inserted the installation disk, turned on the computer while holding D key. A ran Apple Hardware tools (tests of short or long). This error message came up twice with different numbers of rpm: 4MOT/1/40000003: drive HARD-110. I know that it's the hard drive fan. Computer repair man came out. Thought problem may be because I only had 2 GB of memory and ran only to open the Lion of mountain with several programs. Upgrade to 4 GB memory, which is recognized by the computer. But the computer still does not start correctly. Tried the Single Mode and run/sbin/fsck - fy. Said it seemed OK, but changed the volume. Ran he says once again and everything seemed OK. Still will not start.

  When I start in the disc, part of the grey background Utilities is missing. If you move the cursor on the screen, the gray background fills.

  Also, when I try from normally I get startup chime, the apple logo and the spinning wheel. After that make a spin the wheel stops, there is sort of a Flash, then the wheel goes and remains the apple logo. I can hear the computer tries to do something, then the arrow cursor appears and can be moved around the screen. It's like that.

  Also installed Mountain Lion on a USB key, it made the startup disk and tried to start the computer normally. Still will not start.

  Any ideas or suggestions for what could be wrong or other things to try?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• iPad stuck on the apple logo

  IPad is stuck on the Apple logo and halfway along the slide to download

  was reset as the wifi would not connect

  This can help:

  Press and hold the power button / stop and the Home button at the same time, the corners of the black screen,... .in taking... When you see the white apple logo appear to leave bot buttons go.

• a reason for adding the station wifi?

  I have a mac additional wifi station and I got it in my living room where, on the net, I get a lot. the time capsule that broadcasts my wifi is in the office down the Hall.

  adding the station wifi in my living room will help with a question that mail get hung up and not updated?

  This will help the speed of my connection?

  I originally bought it for the trip, but I'm not find much use for it on the road and am thinking of using it at home.

  THANKS for any help

  adding the station wifi in my living room will help with a question that mail get hung up and not updated?

  Unlikely.

  This will help the speed of my connection?

  Maybe, probably not.

  Is your Mac faster when near the time Capsule, when in the living room?  There is a good chance, with a local access point will help.

  When you look at the WiFi menu bar icon.  You have full bars (good), or is it partial (perhaps a repeater would help)?

  If you 'Option' click the WiFi icon is your in-30, - 40, - 50 RSSI value '?  and your noise value in the - 80-90, you are actually pretty good.

  Then chances are that you get a signal strong enough.

  You can check all the contradictory signals in your area via 'Option', click the WiFi icon--> select Wireless Diagnostics

  In the Wireless Diagnostics menu find "Utilities", then select the Wi - Fi Analysis tab, or the menu will just sweep "Wi - Fi", you choose (depends on when Apple changed the Wireless Diagnostics menus.

  Performs a Scan of Wi - Fi will show you your's and your neighbor's WiFi access points.

  You want to focus on the channels, the RSSI and sound columns.

  Channels: You don't want to use the same channel as a neighbour, unless their SECURITY is very low (-70, of-80 to-90), _and_ your RSSI is strong (-30,-40,-50).  If it is a 2.4 GHz channel, you also a 5-channel separation between you is your nighbor harder.  Channels 1, 6 and 11 do not overlap and are common choices, especially if you have several access points in your home.  Once again, if the neighbors have weak signals, you don't really care, because you interfere not with them, and they do not interfere with you.

  5 GHz channels do not overlap and are also much faster than the 2.4 GHz channels.

  But that doesn't mean that you do not want to play with this material.

  We know the Apple Time Capsule.  Is the "wireless Station" an Airport Express?  Or some 3rd party WiFi router/AP to access?

  If an Airport Express Terminal, you can use Airport utility to extend your network.  Is not ideal, but easy to install.  Just make sure when you put the Airport Express is a place where it receives a good signal of the time Capsule, otherwise it's just trying to spread the wrong signal as it gets.  Wireless diagnosis can be useful to identify a good location.

  A performance-based approach is to run the Ethernet of the time Capsule to what is your WiFi Station.  Set up the device, then it shuts down its functions of router (Apple calls this 'bridge', other Mode to do this disable you DHCP and NAT services).  You give the WiFi Station a different channel (see above discussion of channel overlap).  You give the WiFi Station the exactly the same WiFi (SSID) name and the password.  Now you will have setup a network of 'Roaming', where the devices will pass you to a different when access point channel it uses currently becomes too low.

  This will help the speed of my connection?

  Another criterion for speed, is how fast your ISP connection vs how old is your WiFi router.

  If you use 5 GHz channels, you can then begin to worry about this when your ISP speed starts to become well above 50megabits/s

  If you use only 2.4 GHz channels, 15-25' ish speeds are OK on 802.11 g.  802.11n is a little more efficient and can tighten increasingly close to 40-50' ish speeds.

  If you have more than 100megabits per second, you want to have a router with 802.11ac protocols up-to-date and a newer Mac with 802.11ac support.

  This requires that you are the only consumer of your ISP connection.  If you share with your family, and there are lots of type YouTube and Netflix streaming, so your Mac doesn't have to have 802.11ac, but you don't want to a fast router in support of all the other devices sharing the bandwidth.  In this case a 2nd access point connected via ethernet can help share the problems of band radio bandwidth.

  I originally bought it for the trip, but I'm not find much use for it on the road and am thinking of using it at home.

  I have access to 5 GHz 802.11ac very cheap $10 point (not a router), I take with me.  I plug it into the ethernet port on the hotel or a router condo rented for give me a channel which is not sung from neighboring access points and shared connections.  I find that the hotel WiFi is often low, and you share the connection with a ton of other guests.  In a rented condo, you have tons of other condos all competing for 2.4 GHz channels (co-owners often get a cheap router 2.4 GHz 802.11 g, so everyone tries to find a channel not used).  Having my own 5 GHz WiFi access point means that I have no need to fight with others for bandwidth and the right channels.

  Just thought I'd pass that along.  And the wireless diagnostic tests are a great way to find out what the competition is where you stay.

• Signal strength and range of the latest wifi routers

  I have a big house, with my router (BT home hub) in a wiring closet in a laundry room. The House is wired for ethernet and my current Wi - Fi, a Netgear WPN802, is placed at the best discreet place in the House. It is quite visible from everywhere in the House, the signal is quite low in some places.

  If I replace it with a common Netgear router, switched to AP mode, I see a significant improvement in the strength of signal and the beach? Smartphones, tablets and streaming music boxes (Sonos) are the usual wifi customers.

  In general, with one exception, hand-off is controlled by the device. On devices where the roaming aggressiveness can be adjusted, usually of the laptops and PC with Wi - Fi cards, it is sometimes possible to do hand-off low impact, but it is often neither transparent nor without interruption. I walk often so, personally, that this is not a matter of my house with my laptop streaming.

  However, smartphones often do not have adjustable settings of roaming aggressiveness, but it is precisely the devices with which we want to transfer transparent. My old iPhone 5 was terrible to homelessness at home and at work.

  If you install a second WAP in your House, don't expect transparent transfers. But, as I said, it's usually to the device.

  I talked to an exception almost, and perhaps two. One is that there is a connection Wi - Fi standard 802.11r called which rudder hand fast shipment. I don't think that any consumer connection Wi - Fi gear to implement. Two is that Ubiquiti Networks offers an exclusive feature called discount zero where several Ubiquiti APs can work together in the hand-off a device between them. I don't know which of their products offer this feature, but my guess is that they are not cheap. The disadvantage of this feature is that all points of access must use the same channel Wi - Fi (they do all access points appear as an access point). It is not so good, if you have many Wi - Fi devices and need a lot of bandwidth. It is a compromise between speed and reliability.

  I would recommend that you try one of the higher end Netgears with external antennas. If you are happy with your current router and only need an AP, consider the EX7000. It is marketed as a wireless extension, but it is also usable as a wired access point. It'll be cheaper than the R7000. But if you want to improve your router, then the R7000 is an excellent choice. I have one and it covers almost my entire House, 2 storeys.

• Z570 - WIFI speed

  I'm the only person who feels that my Wifi speed considerably decreased since the day where I did a fesh install on my Z570 or that it also has ties with the question pending BIOS?

  Sometimes just turn off the router and restart...

  Mark

• My phone is stuck on the black screen

  Hello! I own an iPhone 6 hours while I used it began to freeze, and the screen went black. It can vibrate even when people call me or send me messages but that's it. This happened a week ago except that my phone is stuck on the home screen and I could always turn on the light, wifi, bluetooth and all that. After an hour it turned off its own well, and after that it worked normally again. Except that this time that is not turning off on its own... what should I do?

  Press and hold home/sleep set button until you see the apple logo and then release, then wait for the bot device upward.

• Servo motor gets stuck in the loop

  My project is to control two motors from the pedals with LabVIEW in combination with UMI-7774 and PCI 7350.

  I use a traditional format of State Machine to simultaneously control two motors according to the absolute position mode.

  In one of the first States, both motors are wound manually by using the speed mode (to make a desired voltage).

  In a later State, the motors are wound to a position specified by the user when you press a foot switch. When you press the other pedal, they are then held in the previous "original" position

  After the first "Tension" indicate when the winding engine and the course due to the pedals is running, the program gets stuck in the State of wind.

  Although drivers are told to go to a specific position, they never move and that's why the program is unable to move to the next State.

  I've attached a screenshot of the winding State where the program is stuck (the engines are not mobile, so when the final position is to compare it with the desired position, the loop continues to go).

  Help, please.

  CAT

  I solved the problem.

  States "Wind engine left" and "Right wind engine" speed has been put back to zero. When the program moves toward States of wind/flow, the speed is always zero (the engines cannot move).

  I simply set the speed value desired in each of the States LBL/RBL (that allowed the engine to get to the position of desire).

  Thanks for all the help,

  Catherine

• When sending emails to the account of my three children, the emails are just be stuck in the Outbox.

  Original title: Emails stuck in the Outbox in Outlook

  In the Outlook of my three children accounts, they can not send emails to anyone other than a handful of family members.  I suspect it's a left block by when the parental control of Microsoft allowed us to control the addresses they could send to.  But that feature has been removed, but it feels as if the 'blocks' are still in place.  This leaves us not use their accounts to mail to friends, teachers, etc.

  Can someone help me remove these blockages?

  The symptoms are very clear:

  1. in all accounts, I can send an email to my own or my wife Outlook account.  Here are the addresses that we allowed long to the parental control of Microsoft.

  2. immediately after, if I try to send an email to a different address (for example, to my e-mail address of work that I never "allowed" back in the day), the email goes directly into the Outbox and sits there without error.

  3. what happens on our iPhones, iPads and PCs; so, it is not related to the browser, any cache problem, etc.

  Help, please.

  David

  Hi David,

  Thank you for waiting. Our support specialist has made some adjustments on the accounts of the child. Please try to send emails using these accounts and then inform us of the results.

  Kind regards.

• Great email is stuck in the output area. In any case to determine if it will send or should it be deleted?

  Send emails with large attachments

  When trying to send emails with large attachments, sometimes the email seems to be simply stuck in the "Outbox" and the system continuously tries to send the email without success. Is there a way to determine if e-mail can be sent or must it be simply deleted?

  It depends on the size of the email and also the connection speed you have.  Any attachments will be encoded and which adds about 40% of the size of the actual message, it should be taken into account.  In addition, certain providers to automatically limit the size of messages to about 10 megabytes, and many recipients do not like huge messages to moor their Inbox.

  Some antivirus software can slow down things too, so you could look into this aspect as well.

  Steve

• I have an ACER Aspire One model ZG5/A150 can I put the card WIFI B/G card WIFI B/G/N

  I have an ACER / Aspire One model / ZG5 / A150 may update the WIFI B/G card for a WIFI B/G/N card?

  My system (Windows XP) will make use of the new speed of the upgrade card?

  If you are familiar with the process, yes you could upgrade the wireless card and Windows XP would be able to use the speed of upgrade, subject the new wifi card you select has Windows XP drivers available.