Studio XPS 435 t / 9000 desktip - new hard drive compatibility

I may need to replace the hard drive on my Studio XPS 435 t / 9000 office. How can I make sure that the new hard disk I receive is compatible with the computer? What should I look for? I see one in the Dell store, but it takes 3 to 6 weeks to ship! Thanks for any help.

Roman J

You can install all internal, SATA, 3.5 ", hard drive 7200 RPM, up to 2 TB in size.

Best to search hard drives Western Digital and Seagate brands, also check the length of the manufacturer's warranty, plus the better.

A good salesman for hard drives is www.newegg.com

Bev.

Tags: Dell Drives

Similar Questions

  • 3 hard disks can be put in a Studio XPS 435 t / 9000 system

    Hi could someone tell me if I can put a third hard drive in my Studio XPS 435 t / 9000
    and type of witch I can use

    kingwarez

    Hi could someone tell me if I can put a third hard drive in my Studio XPS 435 t / 9000
    and type of witch I can use

    kingwarez

    Yes, the Studio XPS 435 t/9000 supports three 3.5 ", SATA drives, see page 57 here:

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_studio_xps_desktop/Studio-XPS-9000_User%27s%20Guide_en-us.PDF

    You need a SATA, 3.5 ", internal hard drive 7200 RPM, a SATA data cable 2 x 6-32 x 1/4 cylinder head screws to install the drive, there should be a spare 15 pin power connector SATA for him in the case.

    The Service Manual is here:

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_studio_xps_desktop/Studio-XPS-9000_service%20manual_en-us.PDF

    Bev.

  • Stops randomly on the new desktop Studio XPS - 435 t/9000, please help!

    My parents spent an obscene amount of money on their computer, however, some being computer illiterate they needed me to help out, which I'm all too happy to talk. So here's the problem, the card will be at the end.

    As long as they have had this computer there randomly stop, little by little is that after large amounts of time to be under a light load (I would say 25% of capacity). He would not give an error or close the problems one by one, power, and everything shuts down (turns screen black computer is silent). He tries to return as if you were starting a shutdown computer about 5 seconds after it turns off.

    I thought it was overheating, so I installed a few programs of the manual fan control and ran a few tests with Prime95 torture. Overheating shutdown for CPU was at 90 c, but since the computer is idling at 36 and 62 max on a charge is no longer me, overheating is the problem. So the only thing I can think of that might cause the problem is the power supply.

    It was a costly computer and I do not want my parents wasted their money on it, any suggestion/help will be greatly appreciated , because I'm stuck and do not want to tell my parents to buy a new PSU, if this isn't the correct answer to this problem.

    Any other information needed is provided if I can find a way to find it on request.

    = care =.

    System of pre-ordered computer office = Studio XPS 435 t/9000

    OS is Windows 7 64 bit Home Premium edition.

    Card mother = Dell Inc. 0X501H.

    = 12G DDR3 memory

    Graphics card = Nvidea Geforce GTX 260

    Power supply = (not sure, I couldn't find the model however, it came with the package of desktop computer Studio XPS 435 t/9000)

    Had the same problem. Fixed what mine was enter Bio going to change (power management features) S3 to S1, save the changes. Never had the problem again. Don't know what I did. But it worked!

  • Studio XPS 435 t/9000

    Is there an upgrade of the processor for my machine?  I have 12 GB of ram, which is more than enough for most of the process, but I have a working project that requires more processors

    gwberesf

    Is there an upgrade of the processor for my machine?  I have 12 GB of ram, which is more than enough for most of the process, but I have a working project that requires more processors

    gwberesf

    The following processors are compatible with the Dell Studio XPS 435 t/9000:

    Intel Core i7 920
    Intel Core i7 940
    Intel Core i7-960
    Intel Core i7 965
    Intel Core i7-975

    Before installing the processor, make sure you have BIOS version A16 installed, what support for Intel processors has been added.

    In addition, the following discussion has useful information on the Dell Studio XPS 435 t/9000 processor upgrade:

    http://en.community.Dell.com/support-forums/desktop/f/3514/p/19500829/20340094.aspx#20340094

    Bev.

  • Studio XPS 435 t / 9000 power supply problem

    My diet giving me in my Studio XPS 435 t/9000. The fan is very noisy, but otherwise there is no obvious symptoms. Since the system is about 5 years, I was planning to change some parts.

    My questions are:

    (1) what could be the cause of the fan to be strong, and what are the potential problems with that?

    (2) a system of 435MT 475W PSU would be compatible, or would I need specifically a 435 t?

    The first thing I would do is keep the Office of your garage. Open the side cover. Use compressed air can and blow all the dust that has accumulated in the tower. Blowing from the rear of the PSU and the inside of it. Replace the cover and retest for the noise of the PSU. The power supply 360w on Studio XPS 435MT will not work. The only Dell validated PSU for the Studio XPS 435 t / 9000 has been F217J 475w. The best video cards, we validated our eating 475w were:
    2XTG4 AMD Radeon HD5870
    5X2CH Nvidia GeForce GTX260

    You might consider installing a power supply of higher power, but with a single card video, you need something bigger then a 650w. You could then spend the video card for sale retail Nvidia GTX660.

  • Bricked Studio XPS 435 t/9000 Motherboard

    Looks like I've bricked just my motherboard upgrade BIOS. Anyone know where I can buy a new one or that of another manufacturer that would work in my case?

    STB3

    Try here:

    http://www.eBay.com/Sch/i.html?_sacat=see-all-categories&_FROM=R40&_nkw=new+Dell+Studio+XPS+9000+435T+motherboard+X501H&_sop=3

    http://www.notebookparts.com/Dell-Studio-XPS-9000-435t-Intel-Desktop-motherboard-x501h-0x501h/

    Bev.

  • DELL Studio XPS 435 t/9000 card reader problem

    I have received my computer desk DELL XPS9000 exactly one month ago. In the first week, the hard drive has failed. If Dell sent a technician has replaced the hard drive.

    Last week, the card reader does not read the SD card. I found that there is a "unknown device" under Bus computer USB controllers, the Device Manager. I was following result after runing DELL self-test - "error initializing Test results: device, 5 d 00 error Code: 0009, Msg: UUTUSBTM - DEVICE_INITIALIZATION_FAILURE user must attach the RH 3 port unit and re-start the test.

    Contacted DELL XPS technical support. The agent could not solve the problem after you install several drivers. He will then plan to send a technician to replace the card reader.

    It seems that I am not alone with this problem. I wonder if there is lack of system design with this nice computer.

    HI2009

    I have received my computer desk DELL XPS9000 exactly one month ago. In the first week, the hard drive has failed. If Dell sent a technician has replaced the hard drive.

    Last week, the card reader does not read the SD card. I found that there is a "unknown device" under Bus computer USB controllers, the Device Manager. I was following result after runing DELL self-test - "error initializing Test results: device, 5 d 00 error Code: 0009, Msg: UUTUSBTM - DEVICE_INITIALIZATION_FAILURE user must attach the RH 3 port unit and re-start the test.

    Contacted DELL XPS technical support. The agent could not solve the problem after you install several drivers. He will then plan to send a technician to replace the card reader.

    It seems that I am not alone with this problem. I wonder if there is lack of system design with this nice computer.

    I've had this problem forever. Problem is that the media player is left in a State of 'strange' because of a BSOD, and I have not found the cause of THE BSOD this.

    My 435 t comes with Vista, and not until I upgraded to W7 I was able to get a handle on this. W7 has reported that the device did not work. Before this Dell replaced the unit and cable. This device appararurent again, only to stay for about 2 weeks. I had it happen once before too, and support me try to remove and reinsert the cables, but I couldn't reach them (support hung up before I could try) and had only tried the device itself, not the motherboard. I called back and said I could not and they sent the parts. Later arrived before the parts I decided to try again by taking unscrew, but I've loosened it and feared the screw would fall into the system and it has tightened. The unit was working again? However, two weeks later he failed. Items sent and installed and it worked.

    2 weeks about go by and it fails. Dell asked me to reinstall Vista and format during the installation. I hesitated and pushed them to do the following. Send a motherboard... and they did it, it was installed and the machine worked. Change the motherboard to solve another problem, 2nd DVD drive opens randomly and narrow when I open the first time, after that, worked OK. That stopped happening.

    After that, I installed W7. Got a BSOD running DVD Flick (there are reports of this failure on Dell because IASTOR, the SATA driver) and the re-start, W7 has reported that a USB device does not work. Well, the media player was gone... open the folder, messed with the wires on the side of the motherboard, case closed, re-boot and it worked again... now I know the "fix."

    It turns out that the fix is REALLY SIMPLE, pull the power cord, wait for the green light to go a little longer, plug the power cord from back in and reboot. Fixed a problem.

    Well, I'd call it a work-around. The real problem is the device USB is not be initialized, either because the BIOS does not power on or the unit was in such a State, it could not be. Removal of power resets the it.

    I hope it works for you.

    IRV S.

  • Studio XPS 435 t / 9000 - PCI-e 2.0 speed outcome

    I just bought a Startech SATA 6 Gbps PCI Express controller card in order to install a new Samsung 850 SSD and run at speeds of SATA 3.  However, it does not appear that the controller card is PCIe 2.0 speeds.  The controller card currently gets 2.5 Gbit/s (PCIe 1.1 speed).  When I run some performance tests on the disc, I get only half of the maximum speed of the drive.

    Everything I've read, it seems that my original motherboard is capable of PCIe 2.0.  Can you please confirm this.  Any other advise would be welcome as well.

    Thank you.

    Sorry, if I have my speed was confusing (it was late at night).  Transfer speed that I am trying to accomplish is 5 Gbit/s and my main question is whether or not this PC supports PCIe 2.0 or 1.1.

    The PCIe 2.0 standard was released in 2007 and I bought this PC in 2009.  In addition, the following link for my motherboard says it's PCIe 2.0 - however, I get only 2.5 Gbps transfer speed of the x 1 PCIe SATA controller card.   .

  • My power button is stuck on my Dell Studio XPS 435 t/9000

    Button has always been a problem, but usually pop backup after a certain time. This time he is REALLY stuck. I have the cover off-side, but there is much too much in the way of the power switch. Is there a way to lift the top cover without breaking the case?

  • Dell studio xps 435/9000 new cpu required

    Hello

    I posted here earlier on my dell studio xps 435/9000 beeping non stop on start up.  I discovered that the CPU is the problem and must be replaced.

    I have an Intel Dual core i7 (socket LGA1366) processor, what are my options for replacement?

    Can I he move to a Quad core as long as the plug is the same, or should I stick to a dual core.

    If I replace the processor should I replace the motherboard as well?

    Is there a way to know if a particular processor is compatible with my motherboard? (the other is the same)?

    Any help is appreciated, thanks!

    alymad

    The following processors are compatible with the Dell Studio XPS 435 t/9000:
       
    Intel Core i7 920
    Intel Core i7 940
    Intel Core i7-960
    Intel Core i7 965
    Intel Core i7-975

    Before installing the processor, make sure you have BIOS version A16 installed, what support for Intel processors has been added.

    Bev.

    Edited to add content.

  • XPS 435 t/9000 Max size of the hard drive?

    Hello

    I have a XPS 435 t/9000.

    I currently have two, 1 to SATA HDD and need for additional storage space.

    There is a 3rd available Bay, a connector available on the motherboard and the power available.

    Reference Dell tells me the motherboard is a Microstar International X501H and the motherboard will limit myself to a 1 TB drive.

    HOWEVER, I found several online vendors that sell to larger capacity of disks and state that they will work on this machine.

    I will ONLY use the 3rd disc as a data reader and will not boot from it.

    Can someone tell me DEFINITELY HARD drive supported (data only mode) via the connector on the motherboard.

    IN ADDITION,.

    Are there options to add a new HARD disk controller to an expansion slot?  (I have no slots half remaining due to other small improvements).  I need all THE details on what I did not research on this yet.

    Thank you very much!

    INTEL RST less than 10.1 DOES NOT support greater than 2 TB.

    Intel RST RAID DOES NO more than Volumes Raid 2 to support.

    You cannot use the last 11 12 13 14 versions of INTEL RST with older Chipsets.

  • Upgrade of RAM Studio XPS 435 t

    I have a Studio XPS 435 t, 64 bit, Windows 7, with 8 MB of Ram. (4) 2 MB sticks in slots 0-3.

    I'll upgrade to Windows 10 and have been informed that I have the 8 MB is less realistic.

    Can I add 4 MB (2) sticks to the empty slots, 4 & 5, or do I put 2 MB sticks in them like the others?

    Or is there a better solution?

    Thanks in advance

    The 435 t is not on the list of Dell systems tested for their compatibility with Win 10. This means it will not work win 10, but you might have a few driver problems that Dell won't help you solve. So before you do anything, it would be a good idea to your Win 7 HDD on external image so that you can quickly return to Win 7 if Win 10 does not work right.  At a minimum, back up all your personal files to an external support.

    Check the RAM installation Manual in the 435 t (not MT). You need the corresponding modules in slots 1,3,5 (blue) and matched modules in 2,4,6 (Pink). If you cannot add 4 GB modules to empty slots 5 and 6 If the other passers-by have 2 GB modules.

    You can get 4 x 4 GB of RAM for this model ~ $100 + at crucial.com to replace what you have now. Or you could buy 3 x 4 GB to fill the blue slots and use the old 3 x 2 GB of RAM (assuming they are all matched) into the pink slots for a total of 18 GB.

    The crucial guarantees that RAM will work if they recommend the modules for a specific system, or they take it back.

    Only you can decide if the cost is worth it for an old (er) PC. And you might want to try upgrading to win 10 first before spending $ on new RAM.

  • XPS 8300: Install new hard drive 3 TB BSOD results after imaging but not after Win7 clean

    I have a XPS 8300 and the original Seagate 2 TB hard drive is dead. Because being forced to install a new HARD drive, I opted for 3 TB and bought a WD because I had horrible luck with Seagate repeatedly.

    Anyway, I installed the new HARD drive and booted from the Windows 7 64 bit Pro installation disc and attached my external drive to backup and choose the backup image to the new disk. It completed without error, but when the computer restarts, I get a blue screen of death with the 7B stop code. I tried to put the HARD drive in a box and attached to another computer, and all my image files are there so I know that the computer was able to write the image to the new HARD disk. How to fix the BSOD errors? I set to update to the latest version of the BIOS (A06) but always the blue screen. I tried to install the latest Intel drivers also and which does not seem to do anything.

    Frustrated, I installed Windows 7 clean on this drive and I am writing this message from him. The drive appears in my computer as a 2 TB. Disk Management displays 100 MB System Reserved Partition, Partition C: of 2047 GB and 746 GB unallocated.

    Why a new installation does not seem to work (I know that I would have to format the 746 GB to use it and to give it a new drive letter) but the imagery that the disc breaks down. What Miss me?

    I've seen a lot of posts on using Intel drivers to solve similar problems. These drivers get breaths during the imaging process? Should they be installed before the imagery of the backup? (Thought that I did, but maybe I didn't do it right - their installation can be verified before the disk imaging?) Tried to call Dell and Windows support... am no where in a hurry.

    Hi LG1382,

    You cannot start Windows 7 on a 3 TB drive. You can use it for data, but not as the system drive. Windows 7 can only start TPG on systems with BIOS UEFI, which does not the 8300.

  • XPS 15 (L502X) - disk HARD death - where can I get the Windows7 DVD to install the new HARD drive?

    Hello
    I have a XPS 15 / L502X 2011 - dead HDD now - and I installed a disc SSD - BUT where/HOW to get the Windows Installer DVD for my PC.
    Can not get with the old drive - I did a Rep old installtion disk - and I DO not think that this contained the windows and drivers for my DELL.
    But it doesn't! :-/

    How now to install the new HARD drive on my dell? Anyone?

    BR
    René

    ROFMAN

    If you are a resident of the United States and are the registered owner of the computer, a disk that contains the operating system specific to your system factory installed can be requested HERE.

    Note: Dell may charge for the disc.

    If you do not live in the United States, contact the Dell Technical Support which is in your country.

    Bev.

  • Studio XPS 435 t display problems

    I have a Dell Studio XPS 435 t desktop and a Dell Inspiron 560 monitor flat screen Dell ST2310 23 via a port two IOGEAR KVM sharing switch. I have a Samsung TV HD 7100 that I am connected to the Studio XPS video card HDMI port and it worked beautifully, better than I expected. However the Dell monitor has become completely black except for the cursor that lights up when I move the mouse. According to the specifications, the video card Radeon 4350 in the XPS is capable of driving two screens at the same time. If I unplug and then reconnect the HDMI cable going to TV Samsung monitor analog Dell ST2310 returns to the top except there is no bar of tasks or cursor, simply on the desktop. Two display (monitor and TV) devices work perfectly by themselves, but I should be able to use them simultaneously. I scanned for and determined that all drivers are up-to-date. I tried VGA for monitor / output HDMI to the TV with the above results. I tried to use DVI on the monitor, but get no signal HDMI plugged. How can I make this work with what I have?

    Wow, that's a long way for a HDMI signal to run, but it works!

    If your two connections are VGA and HDMI. The Catalyst Control Center shows two monitors?

Maybe you are looking for