Studio XPS 435 t display problems

Similar Questions

• Studio XPS 435 t / 9000 power supply problem

  My diet giving me in my Studio XPS 435 t/9000. The fan is very noisy, but otherwise there is no obvious symptoms. Since the system is about 5 years, I was planning to change some parts.

  My questions are:

  (1) what could be the cause of the fan to be strong, and what are the potential problems with that?

  (2) a system of 435MT 475W PSU would be compatible, or would I need specifically a 435 t?

  The first thing I would do is keep the Office of your garage. Open the side cover. Use compressed air can and blow all the dust that has accumulated in the tower. Blowing from the rear of the PSU and the inside of it. Replace the cover and retest for the noise of the PSU. The power supply 360w on Studio XPS 435MT will not work. The only Dell validated PSU for the Studio XPS 435 t / 9000 has been F217J 475w. The best video cards, we validated our eating 475w were:
  2XTG4 AMD Radeon HD5870
  5X2CH Nvidia GeForce GTX260

  You might consider installing a power supply of higher power, but with a single card video, you need something bigger then a 650w. You could then spend the video card for sale retail Nvidia GTX660.

• Upgrade of RAM Studio XPS 435 t

  I have a Studio XPS 435 t, 64 bit, Windows 7, with 8 MB of Ram. (4) 2 MB sticks in slots 0-3.

  I'll upgrade to Windows 10 and have been informed that I have the 8 MB is less realistic.

  Can I add 4 MB (2) sticks to the empty slots, 4 & 5, or do I put 2 MB sticks in them like the others?

  Or is there a better solution?

  Thanks in advance

  The 435 t is not on the list of Dell systems tested for their compatibility with Win 10. This means it will not work win 10, but you might have a few driver problems that Dell won't help you solve. So before you do anything, it would be a good idea to your Win 7 HDD on external image so that you can quickly return to Win 7 if Win 10 does not work right.  At a minimum, back up all your personal files to an external support.

  Check the RAM installation Manual in the 435 t (not MT). You need the corresponding modules in slots 1,3,5 (blue) and matched modules in 2,4,6 (Pink). If you cannot add 4 GB modules to empty slots 5 and 6 If the other passers-by have 2 GB modules.

  You can get 4 x 4 GB of RAM for this model ~ $100 + at crucial.com to replace what you have now. Or you could buy 3 x 4 GB to fill the blue slots and use the old 3 x 2 GB of RAM (assuming they are all matched) into the pink slots for a total of 18 GB.

  The crucial guarantees that RAM will work if they recommend the modules for a specific system, or they take it back.

  Only you can decide if the cost is worth it for an old (er) PC. And you might want to try upgrading to win 10 first before spending $ on new RAM.

• Stops randomly on the new desktop Studio XPS - 435 t/9000, please help!

  My parents spent an obscene amount of money on their computer, however, some being computer illiterate they needed me to help out, which I'm all too happy to talk. So here's the problem, the card will be at the end.

  As long as they have had this computer there randomly stop, little by little is that after large amounts of time to be under a light load (I would say 25% of capacity). He would not give an error or close the problems one by one, power, and everything shuts down (turns screen black computer is silent). He tries to return as if you were starting a shutdown computer about 5 seconds after it turns off.

  I thought it was overheating, so I installed a few programs of the manual fan control and ran a few tests with Prime95 torture. Overheating shutdown for CPU was at 90 c, but since the computer is idling at 36 and 62 max on a charge is no longer me, overheating is the problem. So the only thing I can think of that might cause the problem is the power supply.

  It was a costly computer and I do not want my parents wasted their money on it, any suggestion/help will be greatly appreciated , because I'm stuck and do not want to tell my parents to buy a new PSU, if this isn't the correct answer to this problem.

  Any other information needed is provided if I can find a way to find it on request.

  = care =.

  System of pre-ordered computer office = Studio XPS 435 t/9000

  OS is Windows 7 64 bit Home Premium edition.

  Card mother = Dell Inc. 0X501H.

  = 12G DDR3 memory

  Graphics card = Nvidea Geforce GTX 260

  Power supply = (not sure, I couldn't find the model however, it came with the package of desktop computer Studio XPS 435 t/9000)

  Had the same problem. Fixed what mine was enter Bio going to change (power management features) S3 to S1, save the changes. Never had the problem again. Don't know what I did. But it worked!

• Dell studio xps 435/9000 new cpu required

  Hello

  I posted here earlier on my dell studio xps 435/9000 beeping non stop on start up.  I discovered that the CPU is the problem and must be replaced.

  I have an Intel Dual core i7 (socket LGA1366) processor, what are my options for replacement?

  Can I he move to a Quad core as long as the plug is the same, or should I stick to a dual core.

  If I replace the processor should I replace the motherboard as well?

  Is there a way to know if a particular processor is compatible with my motherboard? (the other is the same)?

  Any help is appreciated, thanks!

  alymad

  The following processors are compatible with the Dell Studio XPS 435 t/9000:
     
  Intel Core i7 920
  Intel Core i7 940
  Intel Core i7-960
  Intel Core i7 965
  Intel Core i7-975

  Before installing the processor, make sure you have BIOS version A16 installed, what support for Intel processors has been added.

  Bev.

  Edited to add content.

• 3 hard disks can be put in a Studio XPS 435 t / 9000 system

  Hi could someone tell me if I can put a third hard drive in my Studio XPS 435 t / 9000
  and type of witch I can use

  kingwarez

  Hi could someone tell me if I can put a third hard drive in my Studio XPS 435 t / 9000
  and type of witch I can use

  kingwarez

  Yes, the Studio XPS 435 t/9000 supports three 3.5 ", SATA drives, see page 57 here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_studio_xps_desktop/Studio-XPS-9000_User%27s%20Guide_en-us.PDF

  You need a SATA, 3.5 ", internal hard drive 7200 RPM, a SATA data cable 2 x 6-32 x 1/4 cylinder head screws to install the drive, there should be a spare 15 pin power connector SATA for him in the case.

  The Service Manual is here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_studio_xps_desktop/Studio-XPS-9000_service%20manual_en-us.PDF

  Bev.

• Studio XPS 435 t / 9000 desktip - new hard drive compatibility

  I may need to replace the hard drive on my Studio XPS 435 t / 9000 office. How can I make sure that the new hard disk I receive is compatible with the computer? What should I look for? I see one in the Dell store, but it takes 3 to 6 weeks to ship! Thanks for any help.

  Roman J

  You can install all internal, SATA, 3.5 ", hard drive 7200 RPM, up to 2 TB in size.

  Best to search hard drives Western Digital and Seagate brands, also check the length of the manufacturer's warranty, plus the better.

  A good salesman for hard drives is www.newegg.com

  Bev.

• Studio XPS 435 t/9000

  Is there an upgrade of the processor for my machine?  I have 12 GB of ram, which is more than enough for most of the process, but I have a working project that requires more processors

  gwberesf

  Is there an upgrade of the processor for my machine?  I have 12 GB of ram, which is more than enough for most of the process, but I have a working project that requires more processors

  gwberesf

  The following processors are compatible with the Dell Studio XPS 435 t/9000:

  Intel Core i7 920
  Intel Core i7 940
  Intel Core i7-960
  Intel Core i7 965
  Intel Core i7-975

  Before installing the processor, make sure you have BIOS version A16 installed, what support for Intel processors has been added.

  In addition, the following discussion has useful information on the Dell Studio XPS 435 t/9000 processor upgrade:

  http://en.community.Dell.com/support-forums/desktop/f/3514/p/19500829/20340094.aspx#20340094

  Bev.

• Dell u3014 does not connect to any laptop (Dell XPS 13 / Dell Studio XPS 1340) via display port

  Now, I received my u3014 dell monitor last night and did not, as still able to connect to one of my laptops.

  I have a Dell XPS 13 (L321X), which has a port minidisplay outside and a Dell StudioXPS 1340, who was a regular on displayport.

  Dell has included a mini displayport to displayport cable with the monitor and I tried this cable with two laptops, but no video appears.

  I get the following messages with each laptop:

  With the XPS 13: The monitor says "no displayport cable is connected.

  With the Studio XPS 1340: "This monitor now goes in powersafe mode'.

  The monitor works fine via HDMI and DVI, but obviously those who do not allow me to enjoy the maximum resolution.

  The two laptops under windows 7 64-bit with video drivers of dell stock. I'm at a loss for what to do and would appreciate any suggestions/help someone.

  Update: Dell sent me a new, replacement monitor. With this new monitor, I bought two cables:

  Mini-displayport to mini-displayport to connect the XPS 13 to the U3014:

  http://www.MonoPrice.com/products/product.asp?C_ID=102&cp_id=10246&cs_id=1024602&P_ID=5991&SEQ=1&format=2

  regular DisplayPort / regular displayport to connecct Studio XPS 1340 to the U3014:

  http://www.Amazon.com/GP/product/B005H3Q59U/ref=oh_details_o03_s00_i00?ie=UTF8&PSC=1

  results: EVERYTHING WORKS as IT is MUST!

  As soon as I hung the xps 13 on the monitor, the monitor acknowledged instantly and went at full resolution. The same is true when I tried to connect with the Studio XPS 1340.

  So I don't know if it's a simple cable problem or if there is something wrong with the circuit board on the original U3014, and frankly, I don't want to try my new cables with her, just in case, and facing another headache.

  Whatever it is, this fixes all my problems. Thanks for all your help to try to diagnose the problem.

• Bricked Studio XPS 435 t/9000 Motherboard

  Looks like I've bricked just my motherboard upgrade BIOS. Anyone know where I can buy a new one or that of another manufacturer that would work in my case?

  STB3

  Try here:

  http://www.eBay.com/Sch/i.html?_sacat=see-all-categories&_FROM=R40&_nkw=new+Dell+Studio+XPS+9000+435T+motherboard+X501H&_sop=3

  http://www.notebookparts.com/Dell-Studio-XPS-9000-435t-Intel-Desktop-motherboard-x501h-0x501h/

  Bev.

• DELL Studio XPS 435 t/9000 card reader problem

  I have received my computer desk DELL XPS9000 exactly one month ago. In the first week, the hard drive has failed. If Dell sent a technician has replaced the hard drive.

  Last week, the card reader does not read the SD card. I found that there is a "unknown device" under Bus computer USB controllers, the Device Manager. I was following result after runing DELL self-test - "error initializing Test results: device, 5 d 00 error Code: 0009, Msg: UUTUSBTM - DEVICE_INITIALIZATION_FAILURE user must attach the RH 3 port unit and re-start the test.

  Contacted DELL XPS technical support. The agent could not solve the problem after you install several drivers. He will then plan to send a technician to replace the card reader.

  It seems that I am not alone with this problem. I wonder if there is lack of system design with this nice computer.

  HI2009

  I have received my computer desk DELL XPS9000 exactly one month ago. In the first week, the hard drive has failed. If Dell sent a technician has replaced the hard drive.

  Last week, the card reader does not read the SD card. I found that there is a "unknown device" under Bus computer USB controllers, the Device Manager. I was following result after runing DELL self-test - "error initializing Test results: device, 5 d 00 error Code: 0009, Msg: UUTUSBTM - DEVICE_INITIALIZATION_FAILURE user must attach the RH 3 port unit and re-start the test.

  Contacted DELL XPS technical support. The agent could not solve the problem after you install several drivers. He will then plan to send a technician to replace the card reader.

  It seems that I am not alone with this problem. I wonder if there is lack of system design with this nice computer.

  I've had this problem forever. Problem is that the media player is left in a State of 'strange' because of a BSOD, and I have not found the cause of THE BSOD this.

  My 435 t comes with Vista, and not until I upgraded to W7 I was able to get a handle on this. W7 has reported that the device did not work. Before this Dell replaced the unit and cable. This device appararurent again, only to stay for about 2 weeks. I had it happen once before too, and support me try to remove and reinsert the cables, but I couldn't reach them (support hung up before I could try) and had only tried the device itself, not the motherboard. I called back and said I could not and they sent the parts. Later arrived before the parts I decided to try again by taking unscrew, but I've loosened it and feared the screw would fall into the system and it has tightened. The unit was working again? However, two weeks later he failed. Items sent and installed and it worked.

  2 weeks about go by and it fails. Dell asked me to reinstall Vista and format during the installation. I hesitated and pushed them to do the following. Send a motherboard... and they did it, it was installed and the machine worked. Change the motherboard to solve another problem, 2nd DVD drive opens randomly and narrow when I open the first time, after that, worked OK. That stopped happening.

  After that, I installed W7. Got a BSOD running DVD Flick (there are reports of this failure on Dell because IASTOR, the SATA driver) and the re-start, W7 has reported that a USB device does not work. Well, the media player was gone... open the folder, messed with the wires on the side of the motherboard, case closed, re-boot and it worked again... now I know the "fix."

  It turns out that the fix is REALLY SIMPLE, pull the power cord, wait for the green light to go a little longer, plug the power cord from back in and reboot. Fixed a problem.

  Well, I'd call it a work-around. The real problem is the device USB is not be initialized, either because the BIOS does not power on or the unit was in such a State, it could not be. Removal of power resets the it.

  I hope it works for you.

  IRV S.

• My power button is stuck on my Dell Studio XPS 435 t/9000

  Button has always been a problem, but usually pop backup after a certain time. This time he is REALLY stuck. I have the cover off-side, but there is much too much in the way of the power switch. Is there a way to lift the top cover without breaking the case?

  

• Studio XPS 8100 Internet connectivity problem

  Replaced my HARD drive and after reinstalling Win 7 Pro 64 DVD, I can't seem to connect to my Modem - Comcast cable via a Cat 5-2 different wiring runs.  An error I get is "Windows did not detect a network card is installed correctly.  If you have a network card, you will need to re - install the driver. "I can say that I did not have a network card, or find all the drivers for that computer.  Prior to the re - install HDD and Win 7, the little icon at the bottom right tray was red-XE outside, but I was still connect to the internet.

  Even tried to start in Safe Mode with network, still no connection.  The only thing loaded on the computer's operating system.

  Thanks in advance for any idea!

  If you try to connect to your cable modem or wireless, you need a driver for NICs.

  For the built-in Ethernet (wired) card you need this driver.

  According to what WiFi card you have (if you have one), could be either he or she. Check your system configuration documents to know that we need or use your serial number on the support page to find the correct drivers, but sometimes missing some drivers during a search by serial number.

  And well, you should have installed both drivers chipset Intel, here , then here, as the first two drivers installed after loading Windows 7. Without the chipset drivers, the other drivers cannot install or may not work.

  Other drivers you need are for video, audio and technology Intel Rapid Storage Technology

• Studio XPS 435 t / 9000 - PCI-e 2.0 speed outcome

  I just bought a Startech SATA 6 Gbps PCI Express controller card in order to install a new Samsung 850 SSD and run at speeds of SATA 3.  However, it does not appear that the controller card is PCIe 2.0 speeds.  The controller card currently gets 2.5 Gbit/s (PCIe 1.1 speed).  When I run some performance tests on the disc, I get only half of the maximum speed of the drive.

  Everything I've read, it seems that my original motherboard is capable of PCIe 2.0.  Can you please confirm this.  Any other advise would be welcome as well.

  Thank you.

  Sorry, if I have my speed was confusing (it was late at night).  Transfer speed that I am trying to accomplish is 5 Gbit/s and my main question is whether or not this PC supports PCIe 2.0 or 1.1.

  The PCIe 2.0 standard was released in 2007 and I bought this PC in 2009.  In addition, the following link for my motherboard says it's PCIe 2.0 - however, I get only 2.5 Gbps transfer speed of the x 1 PCIe SATA controller card.   .

• Start XPS 435 MT Studio problem

  Hello. It is my friends desktop. I wanted to throw this situation after the forum and get reactions. The computer is a Dell Studio XPS 435 MT running Windows Vista. I noticed that the power light is flickering/flashing fast and the yellow led on the motherboard was also blinking. No light was present at all the power button. After that leave it plugged in for a while, I pressed the power button and it started. I also noticed that the color of the green power light and motherboard light now have a solid color and DO NOT flicker. What does this situation? A new battery is required for the motherboard? Please let me know what you think. Thank you!

  More like a power supply failure.

  But the battery is not expensive (~ $2) so you could replace it, just to rule out it as the origin of the problem. It is a CR2032 3 volt lithium ion battery.