Stuttering NB550D HDMI

Similar Questions

• Stuttering on HDMI

  Have a HP 250 G1. When it is connected to HDMI, playback starts stuttering to the point where the laptop should be repeated.

  This happens after an hour or so... everytime. I tried different cables. The port would be defective?

  The HP support center will replace the laptop?

  RickatHP

  Welcome to the HP Forum.

  Not sure what HP will do unless you ask HP - and it's not HP Technical Support.

  Assuming that you already have the following:

  • All the drivers are up to date - reference: laptop HP 250 G1
  • BIOS, if any, is up to date
  • Laptop is in good condition - in other words, it has been unused as a seat cushion, he remained cool and you provide good maintenance (clean disk, in good condition, all the basics of programs)
  • Windows updates are up-to-date

  If you call HP Technical Support, technology may want to run tests (from a distance), you might check / update the drivers, you may be asked to take / send in the laptop for repair.

  Go trough the process to know what to do.

  Yes, it could be a bad port.  Could be a bad driver.

  No, the repairer is not likely to give you a replacement book.  It does not sound like that question type of catastrophic.

  According to the underlying cause of the problem and the determination made by HP - laptop can be repaired, updated or somehow made better than now.

  Contact telephone support HP - USA-

  HP technical support / Customer Service phone numbers - some English Speaking countries

  Guarantee required - us. and Canada

  USA - contact HP / / Self-Help-Email - Chat

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• NB550D - How can I view my screen on HDMI TV?

  I have a NB550D with HDMI output slot. I tried to connect to my TV HDMI full but impossible to get the laptop display to show on the TV screen.
  Any ideas?

  Connect your laptop to your TV using an HDMI cable, select the correct HDMI on your TV (channel HDMI) port and use the FN + F8 key combination to switch between an LCD and TV screen.

• NB550D - the male female HDMI VGA adapter

  Hello

  I need to connect my Toshiba NB550D netbook to a VGA male cable (this is for projection on screen).
  I thought I need a VGA female to HDMI male adapter. However, I'm unable to find.

  All the world is facing this problem before?

  All that I could find is a HDMI/DVI male female. I am considering buying a VGA female to male DVI (not easy to find either), but it sounds a bit heavy.

  Any ideas would be greatly appreciated.

  Thank you.

  Hello

  As I know you cannot connect VGA to HDMI using a simple adapter.
  The VGA port provides analog signals and HDMI supports digital signals

  AFAIK you can use these adapters if the HDMI device would be able to pass the digital signal to analog. But as far as I know is not possible on computers laptops HDMI ports.

  So if you want to connect two ports then you will need to use something like a signal converter, but these pieces are not cheap.

  As far as I know the laptop supports HDMI port, but also a RGB (video out) port.
  So why you n t use this port to connect the projector?

• Toshiba 40RV753 - stuttering TNT HD

  Hello

  I have a problem with my Toshiba 40RV753 and stuttering watching TNT HD. I first noticed what is happening to all about November 2014. I replaced my original antenna, cable connections and who has not solved the problem.

  Issuer = Winter Hill, North West, England.
  Distance = approximately 5 miles, line view.
  Aerial is Vision V10 - 36L periodic journal.
  Cable is 15 meters Webro WF100.
  Toshiba 40RV753, applied new firmware 10.2.63.5 release.

  The stuttering occurs frequently watching TNT HD using the 40RV753 of Toshiba, built in tuner. I tested it with treatment and image color, resolution + power options. Stuttering is even more evident during the movement containing, or scrolling panoramic scenes.

  I didn't notice any stuttering watching TNT SD using the 40RV753 of Toshiba, built in tuner.

  I have not noticed any stuttering while using the Toshiba 40RV753 a HDMI input from my PC, works of HDMI input perfectly with no stutter.

  I have not noticed any stuttering while using the same antenna and cable connected to a PCTV, Freeview HD tuner works perfectly with no stutter.

  My neighbors that Panasonic TV works perfectly when connected to my antenna.

  My Toshiba 40RV753 suffers from stuttering when it is connected to my air neighbors.

  (De) Fortunately I have two Toshiba 40RV753 and the problem occurs on two televisions.

  Someone at - it ideas?

  Hello

  Try to reset the TV by default and to retune the tuner of channels especially the HD.
  To be honest that's all what you do...

  I m not very well why the DTT channels cannot be received correctly, but from my point of view of a few weak signals could cause this problem.

  Google for TNT choppy HD picture and you will get many hits. It seems that more people have issues similar receipt TNT

• y510p hdmi games at 120 Hz

  Hi guys

  I recently bought a Lenovo y510p GT750m sli, that's pretty impressive for the games, but now I think to buy an external monitor, and here I need a bit of advice.

  the monitor I need if work of handel via my Macbook and games via my y510p, for the work I am looking for a monitor 27 "1440 p to 1080 p games would do well.

  Basically, I have 3 questions:
  -How can I be sure that my y510p have HDMI 1. 4 b (b is important here)?
  -I'll be able to get a good gaming performance on an external monitor via HDMI 1. 4B (my concern here is, I'm going to invest in a screen and find myself less than 30 frames per second or aving to lower the quality of game dramatacilly)?
  -l'y510p will be able to run 1080 p 120 Hz on a 1440 p monitor?

  I have my eye on a few of the monitor, if anyone has any experience with them, I'd love to hear about them (especially on game performance)

  -DELL U2713HM
  -Samsung S27A850D
  -ASUS PB278Q
  -BenQ BL2710PT

  (ps: I'm not sure above would be able to make 120 Hz 1080 p)

  Hey guys, thanks for the response guys.

  I decided on an ASUS PB278Q, this is a great monitor, works like a charm on my macBook which is my daily workstation.

  On my Lenovo p510 im to Office impeccable 2560x1440px via HDMI 1.4, I disabled the internal monitor to the laptop, no need so I will save the gpu rather ' etc.

  There are some pixel/artifact problems, do not know what to call it, for the DS, in the window of the browser chrome for Battlefield 4 I get a few strange flickering pixels in bright colours red/green, but only in the middel of the browser when the page uses opacity layers, I have not seen this in any games or other applications so I count them for nothing.

  To the bottom of the scale of the problems: the screen seems to manage to the bottom of the scale is pretty bad, I have e.g. set the monitor 1920 x 1080, text etc. is slightly blurry, it also takes effect in games, I don't know if it is a question of monitor og gfx card, I can only reconmmend by running the Office at 2560x1440px

  Games:
  Virtually all games run smoothly with the external monitor in the middle to high heat, I run most of the games in 1080 p mode.

  Battlefield 4 - BF4 is quite demanding, I tried running at 1440 p high, but it lags a lot, so currently im running the game in 1080 p 59.9 hz settings means to 57 to 60 fps, even on 64player cards in the center of the heat , light sweet, I get about 120 frames per second , but I recon I see only 60 of them since the screen is set at 60 hz.

  Diablo 3 - 1080 p works great in 1440 p high, at the top is possible but a few times so that walk a few stuttering occurs, interest in 1440 p image is rich in saturation, but 1080 p, it seems more gray'ish light, like a high gamma version. (update: run the game in 1680 x 1050 to get the same rich saturation like 1440 p )

  Guild wars 2 -to 1440 p settings means v-sync (choose autodetect to preset settings) I get about 60 images per second, which is very nice

  Overall:
  even if you game on the native of the lenovo display is large enough, nothing beats having a widescreen from 27 "to eye level, in most of the cases the y510p's to the task, but for FPS games properly, you will need to play 1080 p to og medium low to get a good pace, even though It is absolutely worth playing on a screen of 27 ", my games have improved a LOT.

  If you plan ARICI to use the monitor for the y510p, I'd go with a cheaper screen, maybe a 1080 p version because of the problems of scaling of the pb278q from asus, but since im using it for my mac book as well, it works fine .

  So there you have it, game on the y510p on an external monitor to 2560x1440px with FPS desente and quality gfx is possible .

• 8560w his stuttering during playback of music

  Hi all

  I have the EliteBook 8560w for about a month now and noticed his stuttering when you open a new tab in IE/Chrome/Firefox.

  Since it is a configuration quad-core with 8 GB of RAM, this seems quite strange.

  Anyone else having this problem?

  Configuration information:

  P/N: XX058AV

  CPU: i7 2630QM

  RAM: 8 GB (2 x 4 GB, Slot 1 and 4)

  VGA: ATI over-pants M5950

  HARD DRIVE: WD3200BEKT (320 GB)

  Resolved last night; uninstalled ALL preinstalled software HP, but also drivers for networking and graphics (ATI card also has an Audio HDMI output).

  I let Windows install its complement of driver network, but replaced the ATI driver with the 8.911.3.1 version available here (http://support.amd.com/us/gpudownload/fire/Pages/fire_hp_win7.aspx).

  I have troubleshooted the question using the "DPC latency Checker" available here: http://www.thesycon.de/deu/latency_check.shtml.

  Read the entire web site, because it offers ideas on how bad drivers can influence the audio and video playback.

  Hope this helps someone.

• My HDMI cable does not appear in the reading devices or Device Manager. I need to fix this problem

  My HDMI cable does not appear in the reading devices or the Device Manager even if it is plugged, the problem is I want to play sounds through my TV that is connected using the HDMI interface. He appeared once in the playback devices and I allowed and played on a YouTube video and it slowed down the video and the sound was stuttering.  Does anyone know how to fix this? If you do then I would like to thank you in advance.

  Hello

  I suggest you try the steps from the following link and see if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-cant-get-HDMI-audio-the-HDMI-device-does/a494af37-9780-4b4a-895C-b2c1fce17fe6

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Windows 7 Media Center - stuttering/video freezing while playing Internet TV

  I recently installed "clean" Windows 7 Edition Home Premium on XP MCE 2005.  I have serious problems with the video stuttering and freezing frequently during playback of the titles of Internet TV, for example, old episodes of Star Trek.  Results often loud squawk a Duke during freezing.  Sometimes it looks exactly like a CD does when he gets stuck on an imperfection and goes into a fast loop.  The irony is that I can read the exact same titles via Fancast, and have no performance problem either.  Stutter/freeze occurs only during playback via Internet TV in Media Center.

  My system is:
  Intel motherboard - tried two different BIOS D945PVS (according to newest and newest).
  Processor Pentium D 3.0 GHz
  3.0 GB RAM 667 MHz
  nVidia GeForce GT 220, 1 GB of VRAM, connected via HDMI for display in 1080 p (latest verified driver) (second video tried - card was first nVidia 210, 512 GB of VRAM)
  Installed at the Manitoba Intel Gigabit network reports, cable and adapter gigabit connection speed
  Three different tried sound options - Creative Soundblaster X - Fi Elite Pro; MB base IDT HD Codec; nVidia HD Audio, with video/HDMI card).

  I updated all the drivers and installed all Windows updates.  I could really use some help.  I did everything I can think of short of a repair upgrade/reinstall of the operating system.  Thank you, in advance, for your help.

  Well, finally solved the problem.  It turns out that lower level nVidia graphics card I tried (the 210 and GT220) couldn't handle Internet TV via Windows Media Center to the high resolution, I tried to use (1920 x 1080, in my case).  I pulled a map of greater chart end of one of my other computers (a nVidia 9800GT) and Internet TV has played without incident a few hours.  I don "t know where the dividing line is between inadequate and adequate performance GPU, but the GT220 (which I think is about equivalent to a 9400GT) did not work and the 9800GT has done.

  So, if you have a skip/stutter problem, either try a lower resolution or a more powerful card.

• Updated for first 2015.3 CC and now Audio dropped from stuttering frame-type questions...

  I've just updated for first CC 2015.3 on my system running on Windows 7, 32 GB of RAM, quad-xeons double...

  Seemed like a good idea...  Now, the sound stutters and drop frames.

  I have a multi-boot system, so I just loaded Adobe CC on my boot Windows 10.
  Always first 2015.3 does not play correctly and stutters.
  Has created a new project-sequence and placed an MP3 on the timeline without any video. Looks a sort of boat engine during playback and the visuals on the counters still indicate stuttering as well.

  Anyone else having this problem after the update?
  How can I get my 2015.2 or whatever I had on my system?  There is no menu drop down more on install to install an older version [other sites showed a fall to the bottom of the box where you can install the CC 2014 version but I have yet to see it]

  Major project I want to do and now the first is completely useless after this upgrade.

  If 100% fresh install go on Windows 10 Virgin operating system still has flaws that had my configuration of Windows 7 operating system, I'm not clear how 2015.3 playback can be rectified?

  After some troubleshooting I've narrowed the issue until this CC first 2015.3 don't like my graphics card, a SoundBlaster Z and its parameters.  2015.2 worked fine, but now the sound stutters and playback is extremely agitated turn upgrade.

  For this project, I am just finishing, I'll use, of all things, the HDMI sound goes to my computer screen.  The Nvidia graphics card I do not mind reading.  I'll tinker later and see if I can find a permanent solution...

• Reading frames inconsistent stuttering / deleted

  Only, I went from a mid 2010 Mac Pro to 27 "new IMac 5 K retina display.  I'm working on a one hour program that started on my MacPro.  He's dead, so I moved the project to my MacBook Pro and IMAC.  Images is a mixture of DVCPRO HD 1080/30i. GoPro 1080/30 & 60 P; HDV; Canon 1080/30 p; stills, old and new, some old small, some major & new shot with guns.  Chronology is 1080/30i.

  
  

  During playback of the chronology, I get incompatible stuttering in some plans.  Inconsistent because a specific clip can read without problem once, then next time I play there is obvious stuttering.  Play again and the problem will be displayed in a different place in the clip and it may be better or worse.  could start 3 seconds into the clip, maybe 5 or 7.  I first noticed when editing on my laptop, which is a model of retina 15 "with plenty of Ram and the fastest processor I7 nine last year, which is not all that rare.

  When I moved to the IMac, I did a transfer of the time machine MacPro, being understood, it may not be the best way to launch new aa machine.  After all the questions, I reformatted the IMAC and started from scratch.  Exact same results.

  I drove back from 2014, 8.2 to 7 CC and playback smoothed in some test shots I brought in a new project.  I also tried to export a few minutes of the hardest parts of the timeline in a H264 file and it read smoothly, so, apparently, that the file is not corrupted just reading.  Fortunately I'm not editing with the client, so that the element is mute, but I occasionally customers here and this kind of reading isn't great for show work.

  
  

  I spent a few days and several hours on the phone with tech support without a solution to the problem.

  
  

  I also tried the plans incriminated in FCP7 and they reproduce uniformly smooth.  Older DVCPRO HD and HDV clips were captured in FCP7, so I took the first Pro, thinking that for some reason may have been the cause, but the results are the same.
  

  
  

  I'm at the end of what some "Wit", I left and would be very grateful for any suggestions on a solution.  Also when I reinstalled my plugins and Prime Minister they are not appearing in PP.  When I look in the library only 7.0 is there with of course my plugins.  How can I get 8.2 to be present.  just add a new folder and drag the plugins from 7 to 8?  Plugins are only creative culture Impatience to feathers.  Boris Continuum 9 Image restoration and Sonicfire Pro.

  
  

  THX... Jim Watt

  IMac (retina 5K, 27 inches, end of 2014)

  Processor: Intel Core i7 4 GHz

  Memory: 32 GB 1600 MHz DDR3

  Boot disk: Mac HD/3 TB Fusion

  Chart: AMD Radeon R9 M295X 4096 MB

  Video player: Raid 6 to '0' in OWC Raid housing

  Write speed: 328 MB/s

  Reading 333.7 MB/s

  First Pro CC 8.2

  2 additional HDMI monitors

  Determined that it was a hardware problem because stuttering also happened to format Quicktime.  Back Apple's IMac to an Exchange which should arrive next week.  I hope that reading not more jerky.  Exports also played fine.

  JW

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• Audio stuttering on MBPro Sierra

  I'm on a MacBook Pro installed macOS 10.12 retina end 2013 (Sierra).  For several years, I have used a bluetooth JBL of Charge 2 for this portable audio speaker (and sometimes my iPhone and other iPhones).  He has always worked flawlessly.

  Today when I hit play on the audio iTunes began badly stuttering.  After several searches, advice and read everything that I could find (especially regarding similar issues on other versions of the operating system as El Cap, Yosemite, etc.), I did the following, without result:

  • Not matched and repaired the speaker

  • Restarted/rebooted both the speaker and the MBP

  • Reset NVRAM and SMC

  • Redownloaded and reinstalled Sierra

  • Reset NVRAM memory new

  The problem persists.

  Note: I have also been hang this portable projectors in the classroom for several years via a port mini display to VGA and have never had a problem.  Since the upgrade to Sierra, can I talk to is no longer in the spotlight (my MBP always spoke to my external monitors (via the adapter, even) but not the spotlight.  I wonder if these issues are linked, at least to the extent where they came after the upgrade to Sierra.  Thanks in advance for any thoughts.

  Moments after the announcement of this question, I went into my list of connection and uninstalled Knock, an application that allows to unlock the lock screen by knocking on an iPhone.  And here, the sound works fine now.

  I guess I should have posted earlier, because I found the solution immediately after.  At least the bluetooth problem is now solved!

• Presenter PowerPoint on Mac mini mode displayed on the screen and the projector when using HDMI splitter

  We have a Mac mini connected to a screen and a projector via HDMI using a HDMI splitter.

  It works fine for most applications, but during presentations PowerPoint, presenter is displayed on the monitor and the projector.

  When I disconnected the mini Mac's HDMI cable and put it in a MacBook, the presenter appeared on the MacBook screen (as it should) and only the slide appears on the screen and on the projection screen.

  Of course if we have to use the MacBook for presentations instead of the Mac mini, you would need to have seen the presenter on both the screen and on the screen of the MacBook.

  In the Mac mini display preferences there is no button to "Gather Windows" when the Mac mini is attached to the screen and the projector via HDMI splitter is a tab "setting."

  But these two things appear on the MacBook when it is connected.

  Any help would be greatly appreciated.

  Thank you!

  Mike

  

  

  I'm confused. When you use a video separator the same screen will appear on the two monitors connected to the separator. This is how works a separator

• External display on HDMI overheating my Mac and drains the battery badly

  Hey guys.

  I am using a MBP retina 2012 15 inches with an external monitor, a generic LCD 1080 p via HDMI without problems. And recently updated for Sierra.

  The question starts immediately when I plug it into the screen. The Macbook seems to overheat and run fans above 4000 rpm, which is very audible and boring. CPU and GPU temperatures go above 70 degrees C (normally they make 50 +). The battery holds for only 1.5 hours, generally works well for 4-5 hours.
  I tried killing all apps, followed a bad process in activity monitor, changing default resolution - nothing helps so far. The CPU is barely used by 10%, the memory pressure is fine.
  It's just that time when I plug the screen - Mac starts bad feeling. Never, the problem occurred on El Capitan. Maybe it's a GPU problem, but certainly caused by the OS.
  All the world had the same problem?

  Try resetting the NVRAM (hold down the command-option-P-R on startup).

  Also, try to restart in Mode without failure, then normally again.

  Finally, try logging into your account, sign in to a user account (or the guest account) and connect the external display. Same problem? If it works fine for a new account then it's something in your own account which is the cause - perhaps an element of connection or some other system changes induced by the operating system previous and who does not play nice with Sierra.