Stylus

Similar Questions

• I think the evolution of my iMac OSX 10.8.5 El Captan. My old printer Stylus Epson colour 740 still work?

  I think the evolution of my iMac OSX 10.8.5 El Captan. My old printer Stylus Epson colour 740 still work?

  Check the Epson site to see if it is supported.

• For the iPad 2 air, what is the best app for note taking allows you to use a removable keyboard and a stylus? Which is also a stylus good to use?

  I am looking to buy an iPad 2 air to take notes in college classes and I was wondering what is a good software that allows an external keyboard (like a laptop) to type notes and also allows the drawing with a stylus? What is a good pen that is compatible with the app and the iPad 2 air?

  If you really want to use stylus to take notes or draw you should go for iPad Pro with Apple pencil. Nothing else offers good experience especially for hand writing. If you ok with drawing then only pencil FiftyThree is a good choice on iPad 2 Air (but again, it is much worse in my opinion, then iPad Pro + Apple pencil). FiftyThree is also one of the best (paper) apps for note taking (and it works well with their pencil).

  The keyboards are wide work system and not a dependent application. You can go for any model of the 3rd party like you which is compatible with iPad air 2. Advice covers the Apple Smart keyboard are specific to the Pro (they need specific for Pro iPad connector).

• Elitepad: The stylus does not work on elitepad

  I had an Elitepad and upgraded to windows 10. However, I can't get a stylus to work on it. I have a cocofang and Executive stylus for Hp R1 and neither work. I tried to go to the 'calibrate the screen for pen or press ENTER,' but when I tried, the screen is not yet that I was doing anything. What should I do? I have install? How can I get the pen to work?

  Thank you.

  It seems that all devices have drivers loaded. Ok.

  Have you checked the peripheral pen HID HID-Compliant to ensure that it is enabled? Right-click and click Properties.

  Is the HP Executive Pen G2, product number F3G73UT, the pen you have?

  Pen Executive (H4E45AA) is not compatible with your tablet.

  Have you checked the battery?

  The HP Executive Pen G2 is supposed to work with your tablet.

• Germinate by stylus HP

  Just to inform everyone.

  The stylus provided with Sprout from HP, has a small disc of plastic attached to the end.

  This disk is NOT a protective cover. This is a functional element of the stylus and should not be removed.

  Although I am an employee of HP, all opinions expressed are my own and are not on behalf of HP
  
  Concerning
  Ty
  * Click on I accept as Solution on an answer that solves your problem to help others who are looking *.

  This is a website I found for the disk that go on the hp nozzle

  Stylus

  http://www.Adonit.NET/parts/replacement-discs/

• Portege M780 - 10 H: stylus won't come out

  My pen is physically stuck in its Bay.
  It's supposed to flow when you push it.

  However when you push (it always moves) then it will not come out.
  I couldn't get him out of the battery bay either.

  Any ideas?
  Thank you

  Hmm maybe the spring inside the Bay where the stylus does not work correctly maybe you can use some tools like pair of pliers tweezers in order to eliminate this Bay pen

• Is Apple pencil exclusively for the writing/drawing?  Or, can it be used as an older stylus?

  I've been using a stylus with my iPad more old to move objects in applications (my favorite moves the puzzle pieces) and would like to know if the new "pencil" can also work like this, or is it only for writing?

  It is my understanding that recent updates have made much more focused on drawing and less able to be used for navigation or games.

  The pencil of Apple, if you're not already, also only works on Pro models.

• Ghost 360: bought new spectrum 360 and active active pen stylus

  I just bought the spectrum of the 360 HP (15-inch screen) with 16 GB and I7 process. I bought the assets assets stylus pen. Indications that you simply put the pen on the screen tap or tap and it will start working. Well, he didn't. I googled all, the driver is installed, I calibrated the screen. My finger is working to write, but the pen does nothing.

  What can I do to trouble shoot the issue? Yes, until someone thinks I'm a total jerk, I bought a new battery.

  Hi @Bzeeb,

• HP x 360 m6-w011dx: is my HP x 360 m6-w011dx compatible with HP active stylus?

  Is my HP x 360 m6-w011dx compatible with HP active stylus? any other active stylus?

  I can't find information anywhere.  You are my last hope.

  @Liroys, thanks for the reply.

  Thank you to notice me. I double checked the specification of your laptop.

  Your laptop must Support HP active Stylus.

  Please see the guide to maintenance and maintenance for your laptop.

  Se see page 2 on support stiletto on your laptop.

  Link to the guide of maintenance and maintenance: http://hp.care/2dtwtMD

  I hope this helps!

  See you soon!

• EliteBook 820 G3: stylus for Elitebook 820 G3

  I want to buy a pen for my G3 of 820 Elitebook and would appreciate any suggestions or lists of useful pen

  Ball capacitive EliteBook 820 G3 Stylus
  
  And
  
  http://Boxwave.myshopify.com/products/mini-capacitive-HP-EliteBook-820-G3-stylus-pen

• Portege M780-106 - the mouse pointer position of the stylus trolling

  Question re Toshiba portege M780-106 touch screen laptop:
  We have a problem with the mouse, the position of the stylus trolling.

  This gap considerably increases the speed of the increase in movement of the stylus.
  As we had a task of monitoring with the stylus it is problematic.

  We run the task in Windows 7 using python 2.6 with mainly pygame library functions.
  Is there a way to disable the process that produces this discrepancy between stylus pointer and mouse?

  Any help much appreciated!

  Best
  Steve

  The CPU is running in performance mode? There may be a delay because the eco mode is activated, or the speed of the CPU has strangled at low speed.

• Re: Inaccurate cursor when using the stylus on Portege M700 Tablet mode

  Hello

  I was struggling with my stylus for a few months. When I use it, the cursor is just the tip, when I'm in the corners (where the calibration takes place). More central that I get on the screen, more it is. We're talking about half a centimeter, which does not seem a lot, but that can be a real pain if you try to write or draw on the screen.
  The tragic part is that it started AFTER I used the tool of calibration for the first time. If I had known that it makes things worse, I would not have touched him.
  My question is: is there anyone out there with the same problem, or is it unique? If this is the case, I'll have a conversation with my dealer after I go home.

  If it is not unique, how this was dealt with?

  My laptop is a Portege M700, with Windows Vista Business SP1. This issue has been consistent through all kinds of situations, hardware configurations and software content, and the starting point was obviously the calibration.
  I thank in advance anyone who can shed some light on this for me.

  Best,
  Oliver

  You're calibrating with the stylus on an angle?

  Try it with the completely vertical stylus.

• Portege M200 - stylus triggering random buttons

  I recently bought a Tablet Multi Dock for my m200, but having the problem the buttons on the stylus on the right side of the screen to get randomly triggered during normal use when it is docked. I tried the new drivers for my USB mouse, I tried different USB ports, but it still happens.
  Any ideas?

  Hello

  It is not easy to say what may be the problem. I don t think that it is a usual problem and I don't think it is the problem of USB.
  It will be interesting to know if this happened always or just at the time when the device is connected.
  Furthermore, I have recommended the Utility and Mobile Extension accelerometer update.

  Good bye

• Satellite A200 and Epson Stylus SX100 - printer, Scanner recognized not

  Hello

  I have a Satellite A200 (originally with Vista Home Basic) and re-installed Windows XP Home SP3 32-bit edition. Everything worked very well, all USB ports are ok (tested with PDA, webcams, USB drives...). I installed a multifunction Epson Stylus SX100 printer and the laptop only detected the Scanner, but not the printer.

  This multifunction printer has been tested on a non - laptop Toshiba and everything was ok. (The same drivers from the Epson web site). If I install the CD-Rom Epson, with the ease of installation, then it asks me to connect the printer (the first driver it installs). After a few minutes, the program stops installation because it can not detect the printer. If I install it manually (sending to the printer to another port), and then install the scanner. then the scanner is detected, but not the printer.
  I can't go to the properties of the printer and redirect the printer to the USB port as the port is not in the list.

  I downloaded the drivers for Satellite A200 WXp32 tips from the Toshiba web page.

  Any idea?
  Thank you

  Hello!

  Have you updated Windows with all hotfixes from Microsoft? Check the Windows Update site.

  Also try the latest driver on Epson site. Maybe they could work.

  And what's happened, if you delete the printer driver, and then connect the printer to the laptop?

  Good bye

• WT310-10U problems with pen stylus

  Hello

  Despite told by my provider that this model will support pen/stylus input that there no option of pen in touch options in Windows 8/8.1. Please can someone confirm if this model has a digitizer activated on the screen. Can I add additional drivers for work of pen option.

  Concerning

  Hello

  WT310 different tablets with different views are available on the market.

  For example, Toshiba WT310-10U was equipped with a Full HD anti-glare IPS high-brightness touchscreen with wide Angle of view and hardened glass, Anti Fingerprint IOX and Anti anti-glare.
  It is a common IPS touchscreen but this doesn t display supports the digitizer and pen.

  WT310-107 belongs to the same series of PT133E but was equipped with a different view that supports the IPS DIGITIZER and PEN