Sub c multi port vga adapter can not fit in the hold of the Mac book pro computer

Similar Questions

• How can I transfer contacts from galaxy s4 for Mac book pro?

  I recently bought a Mac book pro 15 ".

  I need to transfer contacts and some files on my new mac.

  How can I do?

  TKS for your help

  Ottavio

  Hey ottaviob,

  If I understand correctly, you want to transfer contacts and other things to your new Mac.
  I recommend you to read this article; It has advice to transfer your contacts, music, photos, documents and more on your Android device. Once the content is on the Mac later at some point if you wish, this article is also not to transfer this content in an iOS device too.
  
  

  On a Mac, install Android File Transfer, open it,

  Move content manually on your Android device on your device iOS - Apple Support

  Thank you for using communities of Apple Support. Have a good.

• Suddenly, I noticed that I have to do a larger than normal pressure on the bead of the mac book pro-retine to get an answer to the deeper click. How can I do?

  Suddenly, I noticed I do higher than the normal pressure on the pad of my Mac Book Pro 15 "retina to get a response to my deepest click. How can I do? Thank you.

  Carlo

  Which MacBook Pro model?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Mac Book Pro, outdoor WiFi antennas work to extend wi - fi range when plugged into USB PORTS

  Outdoor WIFI antennas work if plugged into the USB port on the Mac Book Pro. If they do, those who extend range of transmission and reception wi - fi?

  Sorry, but I've never used an external USB wifi antenna but if you describe your use case a wifi Repeater/Extender can be a good option for you. https://www.repeaterstore.com/pages/WiFi-booster-Repeater-Extender-differences

  If the option is not a Repeater/Extender so will have to wait for someone who has used an external USB antenna down to.

• I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  See the following article:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  Make sure your network connection is working and properly configured.

  You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
   
  In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
   
  1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
   
  2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
   
  3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
   
  4. Select "Network adapters" under common hardware types, and then click Next.
   
  5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
   
  6. click Next and follow the remaining instructions.

• Unable to send emails, SMPT can not connect to the server

  I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.

  I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.

  Please advice, or guide me what I am doing wrong, or what I can do to fix this error.

  Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.

  Step 1

  In the Mail menu bar, select

  ▹ Connection Doctor window

  In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.

  Select the Advanced tab in the settings for the account and check the box marked

  Automatically detect and maintain the account settings

  If it is not already done.

  If there is more than one account of the problem, repeat. Close the window and save the changes.

  Step 2

  Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.

  If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.

  Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.

  Step 3

  Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter

  SMTP.gmail.com

  Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.

  Step 4

  If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).

  The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.

  Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.

  If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.

  Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.

  You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.

  Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.

• After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet.

  Network connection problem

  Hi all

  After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet. Network LAN and wireless do not work. Windows 7 has diagnosed the problem and says the following:

  There might be a problem with the driver for the wireless network connection card

  Windows could not automatically bind the pile of IP protocol for the network card.

  There might be a problem with the driver for the connection to the Local network map

  Windows could not automatically bind the Protocol IP on the network card stack.

  Details of detection

  Diagnostic information (network card)

  Network card diagnostics information:

  Network adapter driver to connect to the Local network information:

  Description... Broadcom NetLink (TM) Gigabit Ethernet

  Reference the manufacturer... Broadcom

  Provider of... Broadcom

  Version... 14.0.1.0

  The name of the INF file... C:\Windows\INF\oem5.inf

  Date of the INF file... 14.05.2010 21:21:56

  Name of the section... DEV_KEY2. NTamd64.6.1

  Hardware ID... pci\ven_14e4 & dev_1692

  Instance status indicators... 0x180200a

  Status code from device Menager... 0

  IfType......................... 6

  Physical media type... 14

  Similar to Wireless adapt. The problem is probably not the antivirus program, since I have only deinstaled and the problem persists. I've also uninstalled and reinstalled the drivers, but no solution again. I can't do a system restore point before cleaning the registry, because Windows could not find a file that is needed for the restore. I restored again since before saved registry cleaning but no help.

  Any other ideas please. This really seems teribble :(

  Thank you

  Nikola

  Hello

  You can try all reset them TCP/IP and WINSOCK by this order from the high command prompt:

  netsh winsock reset
  netsh int ip reset log.txt

  How to run the command prompt as administrator (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• Wireless disconnect all of a sudden and then adapter is not found until the reboot!

  I am currently using Acer Aspire 4740 G with Windows 7 Home Premium. Previously, the problem I encountered was that the wireless card is not found when you turn on the laptop with the battery. The problem could be fixed by restarting until the adapter is found, or just plug in the power cable.

  Recently, the problem has gotten worse. Even when it's current alternative, my wireless connection will suddenly shut off and then the adapter is not detected until the reboot. In network connection, the adapter is shown, but it shows disabled. When I click on him allow, the popup notification enabled but in the network connection is still disabled. When I try to uninstall the card and try to install it back, the adapter is gone until I restart.
  They follow methods I've tried.
  -Under the management of the power of the adapter, I unchecked "allow the computer to turn off this device to save power".
  -Using a power high performance
  -Updated my wireless adapter for Qualcomm Atheros AR5B93 v10.0.0.234 (do not know what is the most recent, can anyone verify this for me?)
  The only way to solve the problem now is to restart the laptop. However, the problem will occur again in about an hour or 2, but it's embarrassing!

  Not sure if this helps, because my problem seems to be fixed now.

  I have been uninstalled Tuneup Utilities. I remembered before installing Tuneup, the problem occurs only when my laptop was disconnected and running on battery power. After the installation of Tuneup, this occurs even it is plugged. Looks like than Tuneup messed my network or power management.
  Thank you guys for trying to help anyway.

• The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.

  
  I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

  The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

  EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

  Thank you

  Ron

  Hi Ron,

  Can you please do the following?

  -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

  -Log on to the EM console, go to the homepage of the listener.

  -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

  -Ensure that the parameters, including the Listener.ora directory, are properly.

  Kind regards

  -Loc

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

• Can not good press the mouse on the name of the file and get the option of e-mail

  Can not good press the mouse on the name of the file and get the option of e-mail

  Hello! If I understand your question, you want to right-click on a file and attach it in Mail. To do this, click on the file with two fingers on the touchpad, or control + click on the file, select 'Share', then 'mail '.

  I hope this helps!

• Can not find / choose the directory on mac os 10.7.5

  Hello!

  My system is Mac OS X 10.7.5 Mac Book Pro. I am currently struggling with the implementation of the php version correct, I have recently installed - php 5.5.37; the old, preinstalled is 5.3.28; I managed to take the step to which php - v command shows a 5.5.37 correct version. but both http://localhost/~user/phpmyadmin/setup andshow the old 5.3.28 versionhttp://localhost/~user/phpinfo.php .

  One of the tutorials I found advice to add LoadModule php5_module /opt local apache2///modules/mod_php55. thus, for the file httpd.conf. But I can't add this line because I can't yet find / opt directory to see what is there.

  -bash: cd: / opt /: no such file or directory

  -bash: cd: / opt/local/etc: no such file or directory

  Is it possible that I do not have this directory? How can I deal with this issue?

  I am a beginner in programming and will be grateful for a detailed help - I've been struggling with these issues for more than a week.

  Thank you very much!

  Your system will have this folder if you have installed a software that creates none of the Mac OS X core components use. If you wish, create manually.

  (143534)

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?

  Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?

  Try going into settings > general > reset > reset home screen presentation.