Submenu and implementation of image listfield

I want to do a listfield, who don't have that image which means image be made a member of the list.

ex)

[image1]         [image2]       [image3]

[image4]         [image6]       [image7]

[image7]         [image8]       [image9]

If I click on the image a sublist of show.

How to do this kind of thing?

Any example or how to do it.

Thank you

DK.

I do not understand the construction you used here with you add the BitmapFields to a HorizontalFieldManager, then adding the HorizontalFieldManager to a FlowFieldManager, but if it works, then it's fine.

In any case, I think the code easier you can use goes like this (when it comes to the screen you add hfmIcon to).  Note This code is not compiled, but it is similar to the code that I use in the premises must so OK.

(Note the icon code inset, which is two too left of the emoticon, is used to add code to format.)  I find it easier to read than a code not serrated like you posted - despite the pretty colors!).

Field f = this.getLeafFieldWithFocus();
if ( f instanceOf BitmapField ) {
    for ( int i = 0; i < btmIcons.length; i++ ) {
        if ( f == btmIcons[i];
            // Found your match...
        }
    }
}

Tags: BlackBerry Developers

Similar Questions

  • How to cut and paste the image of the body of the received email

    I'm trying to cut and paste an image included in the bottom of an email and insert it into a Word document so that you can size and print. I can highlight, cut it with Ctrl C, paste it into the document Word with Ctrl V, but the image doesn't show, although the picture frame appears when I click on the place where the photo was pasted. Framework, but empty, no image. Any thoughts?

    Thanks to everyone for their help.

    The problem has been resolved - to try and finally understand everything.

    If you encounter this problem, it is perhaps because, unless you know the file format of the inserted picture, programs can not figure it out for you. Place your cursor on the image, right click and save the image under a .jpeg instead of simply copying. Then work with the file .jpeg in any photo management program you use normally - or even insert it in Word.

  • I just installed menu 24 Firefox and Gmail (Search Images cards Play...) have disappeared. How to restore this menu?

    I just installed menu 24 Firefox and Gmail (Search Images cards Play...) have disappeared. How to restore this menu?

    If it's the black navigation at the top that you bar look, we're sorry, that it has nothing to do with firefox.

    For your information

    The bar is removed by Google, Google updated their menu bars, as last week check out this article for more information http://techcrunch.com/2013/09/19/googles-new-app-launcher-style-navigational-menu-weeks-away-from-launch/

  • Copy and paste the Images NOT working.

    When I click with the right button on an image and choose 'copy image' and then try to paste in my editor, all I get is a string of text that represents the location of the image, as if I had chosen 'copy image location' instead. What gives?


  • Qosmio G20 and Acronis True Image

    Hello

    I have a G20 with the media library and twin 100 GB hard disks that are configured to act as two separate discs (set up of RAID options when I reinstalled the system). I have programs on a disk (C) and the operating system and my data on the other (D).

    On a previous thread I asked to retrieve the C drive only from the recovery disks without wipe data on the D drive, and it seems that this is not possible, to remedy this, I decided to follow the suggested advice and create an image of the C drive for later retrieval if necessary. However, I have had a problem of creating an image or a clone of my system using Acronis True Image disk and wonder if anyone can help. I replaced the D drive with a new disk of 120 GB and uses the old drive in a USB enclosure sata to store the clone or image recovered.

    First of all, all devices, readers ext usb, wireless keyboard, cable network & second screen are connected through a hub to a USB docking station, and when I try to clone with this joint, it fails to restart. Undeterred, I took off the hub and the clone for the external drive seems to work very well. However, when I remove the drive from the existing system and replace it with the clone to test, it does not work. The system appears to start but then get the screen where it says windows windows had a problem and I want to start in safe mode, last known working system, or start as usual in any case. If I select it just reboots and gets back to this screen.

    Also, I tried to create an image rather than a clone and recover the image on the hot spare. Once again, it seems to go ok but when I put the disc and satrt to the top of the same thing happens.

    I don't know if there is anything that you must close before imaging or cloning as the instructions don't say, so don't know if theres nothing running that may affect it. The instructions are pretty basic but seem pretty simple, so I do not see where I am going wrong.

    Does anyone have experience of this type of problem and how to fix it.

    Thank you very much

    A few months ago I acquired a regular copy of Acronis True image for my G20.

    After that many negative attempts to use the program, who do not recognize the disks
    I asked for help using Acronis
    which solves the problem brilliantly, sending me a special version on purpose
    for the difficult features of the Qosmio system.

    If you an e-mail to the Acronis media, they probably have in the Archives of the version
    for the Qosmio G20.

  • retrieve and record continuous images in labview

    Hello

    I use the NI 1744 smart camera to capture and record continuous images of a moving object. My smart camera is detected in MAX and made the seizure of an image. But when I use the attached file of VI in labview, the smart camera is not detected, only the webcam is detected and a video can be generated using the webcam. Please help me detect the NI 1744 smart camera. I will be grateful.

    Hello

    Your smartcam is not directly accessible from your PC because it is a remote device.

    Create a project in real time to access your camera.

    Have a look here: http://forums.ni.com/t5/Machine-Vision/Error-1074397145/m-p/535230/page/2?view=by_date_ascending

    Concerning

  • PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI

    Hi friends,

    I have PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI installed on the Windows XP desktop, that connected to the deducted Mikron camera.

    Recently I spend my Labview to 8.6, but the Mikron camera installation software does not work.

    How can I solve the problem?

    Anyone have the installation software (PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI)?

    Any suggestion is appreciated.

    Thank you

    Jack

    jackp6,

    For the 6205E you will need to download an install the Drivers OR-DAQmx which you can find here:

    NOR-DAQmx

    http://Joule.NI.com/nidu/CDs/view/p/ID/2214/lang/en

    The 1409, you must NEITHER IMAQ drivers that are included in the following the Acquisition of vision available here:

    NEITHER Vision Acquisition Software 2,010.08

    http://Joule.NI.com/nidu/CDs/view/p/ID/2137/lang/en

    Please let us know if you have any other questions.

    Kind regards

    Sam K

    Technical sales engineer

    National systems

  • Object to detect and record the image of the object

    Hello

    I'm trying to detect the object and save the image. However, the programming can sometimes do as request and sometimes impossible. Someone know how to ensure that this programming is stable? My programming is attached. It is using pixels to detect the object when he gets to the Center.


  • take screenshot and saves the image to a PNG file

    Hello

    How do I take screenshot and save the image as a PNG file?

    Thank you

    Avivit.

    If you want a picture of façade one VI, you can use the method to obtain images of Panel (or the Tool of Capture of Code, which offers a range of screws for this).

    If you want a picture of the entire screen, you can simulate a button on the print screen, using the method of Clipboard.Get Image Application class to get a picture of the contents of the Clipboard. If you are looking for "screenshot" you should probably find a few examples already.

  • Need help with the design of a professional network and implement using Windows Server 2008.

    original title: CNS Capstone Project

    Network design and implementation. The project includes an important process of CCES in life cycle of the product as the collection of data and analysis, needs assessment, planning

    design, test strategy, documentation, etc. in fact build a network simulated by using existing equipment.

    The name of the firm co..   wide are network will connect all the sites with regional hubs. WAN will rely on a two-layer hierarchical model. locations

    LAX, DCA EGKK AND ZSPD all REGIONS will BE connect to san diego headquarters, composed of many disprate TCP/IP servers will be the only ro0uters of network protocols

    installed at each location basic WAN. Each building standardimplentaion active directory windows 2008 I re-branded, PROJECT MANAGEMENT how is that, I have a lot of project management books, but I need a Visual, I have a moment hard to read I'm more show me I learn hands on I went back to school and I am new to this can you help me graduating in March if I pass this capstone project.

    Hello

    The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • How to remove unwanted picture and Fax Viewer images?

    There are a lot of unwanted in the Picture and Fax Viewer images, but I can't find a way to remove them.

    I suspect the unwanted images are at your
    The temporary Internet files folder. When you access
    sites on the net that include graphics and images,
    they are loaded into this folder, so you can view them.

    If you want to view the contents of your
    The temporary Internet files folder... try the following steps...

    Reach... Start / Control Panel / Internet Options /.
    General tab / historical section of navigation / settings
    button / see the files button.

    Or... a window IE and go to... Tools / Internet
    Options / General tab / navigation history section.
    Button settings / see the files button...

    You can also go to... Start / run... and type or copy.
    Paste the following command:

    %USERPROFILE%\Local Settings\Temporary Internet Files

    Then press on... Enter... to launch the Temporary Internet Files folder.

    To clear it up... try deleting temporary Internet files.

    Running Disk Cleanup should take care of it.

    (310312) description of the disk cleanup
    Tool in Windows XP
    http://support.Microsoft.com/?kbid=310312

    You may also, on an Internet Explorer window...
    Reach... Tools / Internet Options / delete files / OK.

    Do it again and check "delete all Offline Content" / OK.

    Remove the Cookies button / OK.

    More info...

    Delete temporary Internet files
    http://MVPs.org/winhelp2002/delcache.htm

  • Photosmart 5520 and the mirror image printing

    I have problems printing as well a mirror image. I have a "HP Photosmart 5520'. I read somewhere that this machine has the capabilities but I can't! Help, please!

    Hello

    No, it doesn't have this facility. Please, try the following options:

    • Use a computer program available, like paint or photoshop. These programs allow you to turn and rotate your image to create the image backwards (mirror).
    • Go to the site to Create Mirror Images . This site is free and takes about 60 seconds to do, no download is necessary either.

    Please also visit:

    http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/there-is-no-setting-to-print-a-mirror-image-to-the/TD-p/1810469

    Kind regards.

  • «.. . DLL is not designed to run on windows... 'and/or'... .exe is not a valid win32 application... ' and/or 'bad image '.

    Programs will no longer work until I reboot (uh, it's rebooting) with one of the following error messages: "...". DLL is not designed to run on windows... 'and/or'... .exe is not a valid win32 application... ' and/or 'bad image '.

    Since I got a malware infection (CloudShield) I have had this problem since. At one point I was Windows Vista (could be minutes, hours or days - it varies) to get one or more of these messages for a variety of programs and the dll for things that worked perfectly well until there.  The most recent was to explore "Explorer.exe is not a windows 32 application '! Obviously, I couldn't have been using my computer and opening existing as an Excel document files and the Explorer window that is currently open if this were true!  Everything I run worked fine, until suddenly something I try to open opens more and gives me one of the errors above.  This does not happen when I run mode without failure.

    I managed to repair some of the damage generated by the CloudShield, including how it has disabled my task manager and other programs of the Control Panel, in what I could find on registry cleaning and removing the exe file that he had pointed to. There is clearly something wrong again. I run sfc/scannow and tried the other recommendations in "http://support.microsoft.com/kb/929833" who have found no problem.  I use Zonealarm and have run its auditor of the filesystem a couple of times (on the entire Program Files folder and the Temp files) and not found anything wrong either.

    I found similar problems in the media, but they always a specific .exe or .dll. I have not found that address this kind of

    Although I have not worked as in depth with Windows Vista, I used to install, configure and support business (including beta versions) on Windows NT and XP applications, so I'm not exactly a novice working with programs installed on Windows, I'm completely baffled by this.

    Anyone?

    If you have been infected by malware, the safest bet is to reinstall.

  • Download picture of URL link and store the Image in a Local folder in BB10 Webworks

    Hello

    I want to download the image of URL link and store the image in a local folder in Webworks BB10.
    But I did not get the code for this.

    If such knowledge code or have any solution then please help me...

    Thank you best regards &,.

    Laurent Subudhi

    NitishSubudhi wrote:
    I go through this code... but it is throwing the exception. That is to say "ReferenceError: Webworks is undefined '." "

    According to the device/operating system, you need to add the extension of your installation of WebWorks as explained here for OS SmartPhone BB or PlayBook OS.

    To use read the samples provided, they must work somehow. When I worked with the extension on PlayBook I only copy + pasted the provided source code and changed the attributes for the function call:

    // You need to define "remotePath", "localPath", "onProgress", "onError", "options" like shown in documentationblackberry.io.fileTransfer.downloadFile(remotePath, localPath, onProgress, onError, options);
    

    For OS SmartPhone BB the function call looks like this:

    // You need to define "options" like shown in documentationwebworks.io.FileDownloader.download(options);
    

    All think that all information provide here, try to follow and cela should operate.

  • Copy and paste an image vs fill in an email or MMS

    Curious to know if anyone has a preview here. I'm doing an app that will include images to send by email or text (MMS).

    -Road 1 - place them in the Clipboard and let the user pasted everywhere where

    To bring them to the Clipboard, it seems that I use Clipboard utility functions and get the image in a QByteArray. It seems not too difficult, but I don't know how I'll test it on the Simulator. It doesn't seem to be all the built-in apps that allows you to paste in an image (such as the MMS on the iPhone or in an email in Mail).

    Any ideas on how to test the collage of image data? I guess I could build an application that the receiver of the dough, if there was a standard user interface control that could receive the pasted image.

    -Route 2 - use the API to create a message in my application

    I see an example for email, but this seems too complex.

    Is it possible to simply call the stock by e-mail or messaging app and pass it a file to use as an attachment to the message?

    Thanks for the help.

    Kurt

    Impossible to copy paste.

    Ivokation framework to use the 'maps' is pretty easy to use. Don't go the route of the Messaging API.

Maybe you are looking for

  • Why what I receive update alerts, but, when I check, I said I use the latest version of FF?

    Why what I receive update alerts, but, when I check, I said I use the latest version of FF?

  • What is MTLAgent?

    I have a: Model name: Mini Mac (2014) Model identifier: Macmini7, 1 Processor name: Intel Core i5 Processor speed: 2.6 GHz Number of processors: 1 Total number of cores: 2 (By heart) L2 Cache: 256 KB L3 Cache: 3 MB Memory: 8 GB Running OS X El Capita

  • Chop light motorcycle stock

    We bought a Moto G 3rd for my girlfriend and I was very excited by the chopping function. Be satisfied with the G bike that I bought the Moto X game for me I ask a little more from my phone. Now I am confused because I can't get the action light Chop

  • Remove (without the appellants) project dependency

    The Labview project is not allowing me to remove a dependency file (driver instruments) who has no callers, even if I have relinked all my files from project in the instr.lib folder. I have a dependency file something like "Agilent MXA series...". "l

  • ENVY of HP TouchSmart 14-k029tx Sleekbook

    Hi I got one of the TouchSmart from HP ENVY 14-k029tx Sleekbook machine, and I want to ask that can additional hard disk Sata or SSD to be added to the existing 128 GB SSD and if so how and what model of HARD drive I can get for it. I contacted HP su