substitute the new power cord on the charger?

Similar Questions

• HP pavilion x 360: new power cord

  My dog chewed my wall charger. I discovered the next day when I tried to recharge my laptop... my computer was almost dead... so today I bought a new power cord hp. It resembles the old plugs well, but my computer does not illuminate. No incandescent lite on the Start button, nothing. Question: the new wall charger need to "charge" a while before it will turn on the computer...or/ and the computer need time to reload, rather than being able to happen sometime alternative through cord?
  Please help if I can get my computer back from work! Thank you!

  Hi @Pboudreaux,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post and I understand that you have changed the adapter, but your laptop still not start upward.

  You can follow this link for troubleshooting

  Computers laptops HP - computer won't start (Windows 8)

  and select the link, the computer receives no power (no noise or lights) in this document to check if the AC power works for you laptop.

  Let me know if you need assistance.

  Kind regards

• My time capsule 2 TB suddenly stopped working after 14 months, is possible to be to power Sunrise again? I tried a new power cord and the different points of sale.

  MY time capsule 2 TB is is no longer under tension after 14 months. I changed the power cord and made sure that the work of output and still no power. Is it possible to fix it?

  Yes. You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• I need a new power cord for my pc, how do I know what we need

  I need a new power coard how do I not producing a or by

  Hello

  If it's a PC and not a laptop, just check with your local computer store or even a Big box store
  such as Best Buy. In the USA they should all be standard on both ends.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• USB blackBerry smartphones new power cord

  After having BlackBerry models earlier that all use the same type of connecting the power supply, torch uses what I guess is called a micro USB connection in the device rather than the mini USB, so none of these old cards AC work (* beep *...).  The black square wall wart new torch is similar to the white AC to USB connector used by my iPhone.

  The question is: since I was a little of those Apple brand, as well as third-party AC-PIN-to-USB slot loaders, everyone can use to fuel the flame?  If I want to buy just a micro USB cable additional to tote around in My Briefcase, can I use this cable with the AC - USB charger of third party that I travel with to supply the torch safely, or SHOULD I use the official BlackBerry issued components? (which no doubt, they would like to buy...)

  Any USB adapter will work. I have a traveling with, with 2 USB ports. I use it for iPod, BBerry, camera, whatever. I wear the adapter and cable for each device - there are now so many variations of the "micro USB" connector to make your head spin. Advantage of having separate cables is that you can use your laptop as a charger (expensive) as well.

• Need new power cord HP Compaqnx7400

  Where can I get one of these cheap and fast lol. ?  I'm in the South of Florida.

  pcpunk wrote:

  Where can I get one of these cheap and fast lol. ?  I'm in the South of Florida.

  Hello

  Very cheap and very fast:

  http://www.eBay.com/BHP/HP-Compaq-nx7400-charger

  Kind regards.

• Power cord for a Toshiba NB200-10Z bought in the United Kingdom EU?

  Hello

  I just ordered the Toshiba NB200-10Z of Amazon.co.uk because the model wasn't available everywhere in Finland, despite being listed on the site of Toshiba Finland. It ' probably be only with the style UK power cord & plug-and - my concern is where can I find a power cord appropriate for the unit (with a schuko type plug)? Or are the UK and different EU cords also at the other end where they plug in the power adapter, which is what I need to get a power adapter and a power cord?

  Thanks for any information.

  Best regards
  Boucicaut

  Hello

  I agree with Al - eX. As you can see on the underside of the adapter AC/DC it can handle voltages range from 110 to 240 volts.

  You need only a new power cord. Therefore, you can contact the service provider authorized in your country. Maybe you can exchange the cable and if you get one free.
  Alternative go to your favorite computer store. Such a cable, you must find there too.

• problems of ultra maxx charges with a power cord

  Sometimes my Maxx will begin charging when I plug, sometimes it requires a reboot before it will start to load. I tried a new power cord from Verizon and the results are the same. I got the phone because he is out, and the problem started a couple of weeks. Someone can offer some advice or should I go to? Any suggestion would be appreciated.

  By a new power cord do you mean just the cord or adapter as well? If only the power cord that I suggest that you try using a different card first thus.

  Also make sure you have the USB plug inserted at bottom. You don't want to lift or turn it on, but push to make sure that it is firmly in place.

  If this continues to happen that I would propose a factory data reset. Who will rule on software issues. If the FDR works advertising repair/replacement would be the next logical step. HTH

• Power cord not charging Omni10

  Bought an Omni10 in December of 2013. I know that there is a power supply problem because my power supply has already been replaced once. Still, it does not load my tablet. Says that it is connected but does not support. How can I get a new power cord. (FYI, work for HP for the last 21 years).

  Hey @Alainak,

  Welcome to the forums of HP.

  I understand that you are looking for a replacement power supply cord.

  The HP Forums are used exclusively for technical support and troubleshooting. If you are looking for a replacement under warranty, you will need to contact our telephone support team. Visit http://h22207.www2.hp.com/contact-hp/ select your region and then click on contact Support upward. Fill out your information on the product and then fill out the form at the bottom of the page. When submitted it will give you a case number and phone number to call.

  If you are looking for a reference number for the purchase of an adapter, they are as follows:

  • For use on all models of tablet in Europe and South Korea: 741855-009
  • For use on Tablet all models in North America: 741855-008
  • For use on Tablet all models in the United Kingdom: 741855-003

  You should be able to order one through HP part Surfer or you can find a cheaper on sites like Amazon or eBay.

  Thank you.

• change power cord causes mice to act strangely

  I installed a new power cord for my laptop today, and since the mouse was difficult to maneuver.

  Right now the top of my head I can think of two very good reasons for this problem, but it relies on the mouse is wireless.

  1. Brick of power (for example the transformer) is perhaps not the right voltage or if it is, it may not be able to produce enough power. Subsequently, your devices (for example, mice or USB ports) could suffer brown-out. Check that the power rating on the labellig against the recommendations of the manufacturer of your laptop.
  2. The power cord and the power brick is poorly protected and it interferes with the signal wireless mouse. If this is the case, you can most likely get in trouble for staying connected to a wireless point.

• my power cord will charge the computer only when I hold firmly to the computer

  The model MacBook Pro 2009 - I went through 3 power cords now only in the last months - now, it can load the device only if I turn the end a small amount and keep the pressure on her...

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Hi, my Aspire E15 completely off when the charger is out. Does not start without power cord

  I have an Aspire e15 start ES1-512-C5YW which I brought last Monday and it was all fine until yesterday whn the power cord came out pf the socket and wull no longer work on battery.

  I have two acer power cords and it happens with both of them, but the cords work very well with the other Acer I

  Thrre is without a removable battery in this laptop so im a little need help!

  norfolkNman,

  No problem, nobody WANTS their stuff does not work. MOM

  Do you have it up and running rights?

• Charger LC - E8E and I lost the power cord. For the t3i

  Is this a universal cord or is there something special about this? I have a xbox the cord of the charger that looks and fits the plug, but I don't know if it's the size of the right pane.

  Thank you

  The information you gave me worked fine. I plugged the cord that fits into the canon charger and charge the battery. Then put the battery in the camera and turned on. WORKED WELL

  Thank you

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Portege M200 - connection loose in the power cord

  Hello

  After almost 5 years of intensive use (this is the 3rd battery which is currently begging for replacement...) my M200 still works fine - great device!

  However, the power cord has a bad connection for a few weeks now. The problem is located next to the DC plug. So, whenever I connect the M200 to food, I need to turn and bend the cable in order to reactivate the charge current. Friend of mine, a 2004 purchased another M200, exactly the same problem.

  Problem: The power cord is fixed on the transformer, and a new Toshiba 15V power is quite expensive (if you manage to find one, anyway...). Is there a solution to fix the cable (or get a replacement cable / repair kit) rather than buy a new power supply?

  Thank you!

  Florian

  Hi mate,

  AFAIK there is no repair kit for this problem. You must buy a new Toshiba AC/DC adapter because a cable can t be repaired.

  I know it's so cheap, but maybe you can get another compatible adapter AC/DC to an authorized service provider. Many AC adapters are compatible to different notebooks, so maybe a cheaper is available.

  Here you can search for an ASP to give them a call:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider