Sudden and regular crash using brushes/Wacom Cintiq problem

Similar Questions

• "12 items" and layers do not work.  I send photo of Lightroom 5 to 12 items and can NOT use LAYERS.  No problem with the '10 things' what can go wrong? With the help of MacBook Air.

  I use a MacBookAir.  I send a photo from Lightroom 5 to 12 items and appears in the photo, BUT when I press "Layers" (bar at the top on the screen), ALL THE CHOICES (for example, "duplicate layer") are 'whited out' and none of them pressing results in NO ACTION.  In other words, I'm IMPOSSIBLE the ELEMENTS of USE IN LAYERS 12.     All have worked (and STILL works) fine to 10 items.  Something fundamentally wrong, but I don't know what!  ANY IDEAS? Thank you.  Bob Keefler.

  Hello

  There are two possibilities

  (1) you are using a 16-bit/channel image - go to Image-> Mode-> 8 bits/channel

  (2) you are not in Expert mode - click Expert top

  Please let us know if it works.

  Brian

• 3 day old iPhone 6s more iOS 9.2 warm the back of the phone and quick battery use.

  Hello

  3 days ago, I bought a 6 s more than 64 GB iPhone.

  As I used the phone (by taking a few photos, browse the facebook/instagram), I noticed that my iPhone was very warm (could feel the heat through my rubber as case) and the battery had dropped by at least 30%. I contacted Apple support yesterday after the upgrade to iOS 9.2.The support person said restore your phone to factory settings. I restored the phone installed my important apps and only took a few photos. The same problem happened. The phone was hot and the battery kept exhaust I used resources very not applications. I have always erase the multitasking apps and turn off the phone regularly. All the solutions for my problem? Thank you!

  Try again the phone back to the factory settings, this time without the help of the backup data. Manually configure personal information, do not install 3rd party applications. Then test the phone. If the phone works normally, use the backup again. In case the problem comes back, contained backup of corrupted data, the cause of your questions, and you will have to start all over again without any data backup.

  If the phone still heats after setting back to factory settings and do not use the backup, this problem is hardware driven and the phone must be repaired by Apple.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• Photoshop CS5: Shots of the menu bar on cintiq 21ux I work with photoshop cs5 on a Wacom Cintiq 21 ux and it has always worked great. But all of a sudden the documents, I work in a wink from the above menu bar and I can't go back there. It covers only the

  Photoshop CS5: Shots of the menu bar on cintiq 21ux I work with photoshop cs5 on a Wacom Cintiq 21 ux and it has always worked great. But all of a sudden the documents, I work in a wink from the above menu bar and I can't go back there. It covers only 2/3 of the cintiq. I installed the drivers from the wacom and installed photoshop again, but the problem is not resolved. It's very frustrating because it is almost impossible to work this way. I hope you can help me. I have Yosemite on the iMac, and it worked correctly. The problem occurred suddenly. I reinstalled the driver for the Tablet and photoshop cs5, but it does not solve the issue. I have a multiple display set in place. All other applications work fine (corel painter, illustrator, indesign). It's almost as if there is an invisible magnetic line on the screen where align with the document and the other tabs in the workspace. Now, I bought and installed cs6 and the problem is still there. Can you give some advice? Is this a known issue? I don't know if it ' s a problem caused by Wacom, Photoshop or Apple. Help, please. Thank you.

  I suggest that you take a look at this thread and see if something is a help to you: problem window CS6 on Cintiq on OSX Yosemite

  Benjamin

• Wacom Cintiq to the brush size adjustments does not

  Hello!

  I just bought a Wacom Cintiq 13HD touch and I can't brush shortcuts adaptation to work. After some googling, I understand the problem is that I don't have an English keyboard and shortcut keys the Tablet uses are the ' [' and ']' key that does not exist on my Swedish keyboard. These characters you get by 'Alt' + '8' / '9'. I tried to reconfigure the shortcuts of these combinations in the Wacom configuration application, but that didn't work either. In fact these combinations does not work on my keyboard either. I can't find any solution to this other than to change English keyboard, I don't want to do. And as the screen is small, it is essential to be able to easily change the size of the brush. Using the cursor is not very easy. Any ideas?

  Hi UglyBob,

  What version of Lightroom do you use?

  Please follow https://www.slrlounge.com/set-up-your-wacom-intuos-pen-tablet-for-lightroom/ to correctly configure your tablet with Lightroom.

  Kind regards

  Assani

• Wacom Cintiq Companion 2 + bug Flash Adobe ~ brush "jumps" on screen during the development

  Equipment - Wacom Cintiq supplementary 2

  Software - Adobe Flash CC 2015 (as well as 2014 and CS6... same bug replicated)

  Drivers - Wacom 6.3.11 - 4 ~ ~ ~ and Intel Iris Graphics 6100 version 10.18.14.4170

  OS - Windows 8.1

  Let me start by saying 2 things:

  1. I've seen other posts similar to this issue, but often they resolve themselves by having disconnected and reconnected the cintiq or intuos in the computer. Given that the roommate of Wacom Cintiq is a stand-alone tablet computer running Windows 8 (.1), is not an option

  2 spoiler alert... I have a solution for the symptom: change the text in the 'small 100%.' The problem, as I will describe below, is that it is a workaround for the symptom, and it does not solve the bug itself.

  First... the question. In the image below, '1 2 3' on the left was drawn with Wacom pen using the Brush tool. '1 2 3' in the top-middle has been designed with my finger on the touch screen of the Companion 2. The lines right are actually 'points' that I did with the pen that jump radially out of a given time in the top right of the screen.

  

  Second... the 'solution '. Change the display of the scale 'Small 100% ' (located in the control panel > hardware and audio > display...) Notice the orange arrow). I have attached an image with the parameter as seen in point 8.1 of Windows (see below). Now, it will solve the problem of the tip of pen jump away from the position of the real pencil.

  

  Third... Here's my problem. The Wacom Cintiq Companion 2 HD display is 2560 x 1440. The default setting for Windows 8 for this tablet has a text value scaling of 175%. The high screen resolution allows more work space real estate within Flash and windows of text scaling allows me to be able to read words and see the icons without forcing (because the actual size of the screen itself is relatively low compared to its resolution capabilities). After this "difficulty", so actually nothing appears on the screen, I need to lower the resolution of the tablet to the most 1920 x 1080 (meaning with scaling to 100%, yet the text is quite small, but it's a compromise to keep some of these program workspace real estate mentioned previously).

  I was encouraged to do this post, so it could be a quick response to the immediate symptom of the brush jumping bug, leaving people less able to do their work without a break and ALSO so that we can go beyond to know if there is a more permanent solution to the problem. NOTE: Photoshop works like a dream. This is only a Flash issue (for me).

  Finally, here are some details of troubleshooting, I already went through that does nothing to solve the underlying problem:

  -all drivers have been updated

  -the most recent version of Flash has been downloaded

  -Flash has been uninstalled (properties of withdrawal) and reinstalled

  Wacom - driver has been uninstalled and reinstalled

  Wacom user properties - were removed and re-configured

  -Ink Windows has been disabled (which disables the pressure sensitivity) and recontroler

  -Press- and - hold right-click has been disabled in Windows Tablet properties

  -Shortcuts have been disabled in Windows Tablet properties

  ... There is more (like resetting windows at the factory and the resettlement without updating the drivers) also has nothing, but these are the most relevant elements. I was told that Adobe was aware of the problem and that it would be resolved. My goal is to discover a possible ETA on this difficulty and how it might come on (updated internal Flash? Layout workaround in Windows?) ... or, better yet, if it already exists! Like many people, Flash is the main program I use for work and I travel a lot (where the Wacom Cintiq purchase additional 2). This is a bug quite important that I would like to see resolved, if there is not yet, or answered here so she a. thanks team!

  UPDATE for WINDOWS 10

  To recap: I mentioned in the original post I made above that the bug Flash jump at the heart of this message seems to be caused by a scaling function in Windows. This feature exists because of situations like mine where I own a portable tablet (Wacom Cintiq Companion 2) with a physical screen size relatively small, but the high resolution capability. High resolution is good because computing means that signs Flash will take up less screen real estate, allowing more space for work/workshop space. However, high resolution on a small screen also means that things like icons and the text of the window are very small and difficult to read. That's what the functionality of scaling in Windows has compensation for... but it also caused a problem with the brush (see images/posts earlier).

  (Apparently) there is a new feature in Windows 10 which allows you to increase the TEXT size without scaling of all the features of display (such as icons).

  * Now I'm able to put my small screen of the actual size of a high-resolution AND can't read the text in things like menus and icons without the jump bug.* *.

  I hope this helps some of you out there with this similar problem. Remember, no matter what you do... Make sure that the scale is set to "Smaller - 100%" as I did in the original post. Happy drawing!

  

• Consider purchase of Wacom Cintiq 27 HD Touch - Questions about the tactile feature in Photoshop and Lightroom

  I'm considering buying a 27 HD Touch of Wacom Cintiq monitor. I have a few questions about the two programs Adobe and their use of the 'touch' feature - Photoshop CS6 and Lightroom 5.7 running on Windows 7.

  1 problems related to touch a feature in Lightroom and Photoshop CS6 and 5 resolved that you see on the forums of Wacom a year ago?

  2. If so, is there sufficient value gained through the tactile feature in Photoshop CS6 and Lightroom 5 to justify the $500 price difference between the Cintiq 27 HD vs Touch HD? (I realize that this is a subjective question based on the abundance of its cash).

  3. I intend to stay with CS6 as long as possible to avoid a monthly subscription, BUT I wonder if buy the Touch HD can provide additional key features in future releases of these products that do not exist currently. (It is a pie in the kind of sky in question).

  Thank you!

  Kent

  Support for Photoshop Touch is added by CC 2014.2.2.  However as the Pro Intuos Wacom tablets with touch can be used with earlier versions of Photoshop and the Wacom Tablets Configurator can custom features can be used with Photoshop touch tablets.  I use LR but I don't know that the same thing would be true for her. You can configure the setting for many applications. The device driver knows which application its interfacing with and uses the parameter set for each...

  I have disable most of touch when using Photoshop.  The main reason why I have a Tablet is Photoshop Brush tools. Like Eraser, clone stamp, etc, nothing is better then a pen when it come to create the layer mask.  For most programs, I always use a mouse and I use the keyboard, the mouse and the pen with Photoshop...

  I never wanted a Cintig I do not have my hand between my eyes and the work. I'm not an artist.

• Eraser and Windows Journal lasso to register in the upper left corner of the screen on Wacom Cintiq 21UX

  I try to use Windows 7 Windows Journal with my Wacom Cintiq 21UX (which acts as a second DVI monitor and a USB pen camera).  I can write with the end marker/pen/highlighter (including pressure sensitivity).  But when I switch to the eraser tools or lasso (even if I use the rear part of the pen), my stylus entries are mapped to the wrong place, about 75% of the screen and the 30% of the screen left.  This makes the newspaper on the Cintiq pretty useless.

  Cintiq works fine with all other software, including Windows Paint, Adobe Illustrator, Adobe Photoshop, etc, it seems to be isolated Windows journal.  That's why Wacom claims it's about Microsoft, not Wacom.

  Other people seem to have the same problem, any time by Windows Journal on a machine with multiple monitors:

  http://www.Vistax64.com/Vista-General/41668-Windows-Journal-dual-monitor-pen-tablet.html

  http://www.Vistax64.com/Vista-hardware-devices/70403-bug-Wacom-tablet-MS-Journal-two-monitors.html

  http://www.Vistax64.com/drivers/268569-Windows-Journal-Wacom-tablet-problem.html

  http://www.motherboardpoint.com/Windows-Journal-dual-monitor-pen-tablet-t198449.html

  I had the same problem with two screens. I've now solved!

  I disabled the extended screen while the Windows Journal was opened, and the gum and lasso were aligned where it should be. Then I reactivated the extended monitor and two functions worked again very well. Even after a reboot, the functions worked fine!

• Having major compatibility issues with Adobe, Mac Yosemite and Wacom Cintiq programs companion hybrid.

  Since I upgraded my Mac iOS Yosemite, my Adobe CS6 programs do not work well at all. They start very well, but the menu windows acting weird, often forcing me by dint leave whenever I try to do something. I downloaded programs CC trials and some may work better for me, but most have similar problems when I try to use on the Wacom. I'll explain my setup, and exactly what is happening...

  I own an iMac end 2012 model (the one without the cd player) and a Wacom Cintiq hybrid companion that I use as a secondary display design. The screen Wacom is under my iMac in the settings screen, since my Wacom rest below the iMac screen. Think Nintendo DS... like how the lower screen is touch screen... same deal here.

  When I open Photoshop CS6, CS6 Illustrator or even Illustrator CC and move them on my Wacom screen, the 'new' window is aligned with the top of the screen, cutting off buttons and options I need. I can't reposition the window because the upper part is necessary to move it. In the case of the window 'opens', it does not at all appear, but it blocks my program. It is as if he wants me to cancel the open window, but the window is not on any screen. That's when I have to force quit. I also noticed that sometimes it seems you have a 3rd office every time I enter the mission control afterwards. I have no idea why this is so.

  The only option that I know to get around these problems is to put my screen on the mirror and mirror of the iMac screen mode, but not only I have to go into settings and recalibrate my pen, whenever I want to use these programs, but it's a major drawback when I fight for space on my screen since I was only 1 working with this mode. And just to be clear that CC Photoshop works perfectly for me. No compatibility issues he Fortunately, but if it works well with my setup, then why don't the others. Worse yet, I don't know who is at fault... What is an Adobe problem, a problem of Yosemite or a problem of Wacom... I do not know.

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  -http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/

  -https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

• Problems with Illustrator and Wacom Cintiq 13 HD

  Unter Mac OS 10.10.2 works Illustrator nicht auf meinem Wacom Cintiq 13 HD Ich kann weder needed yet other functions use.

  Software Tablet von Programmen ist und auf dem newest Stand. Same Das habe ich auch bei InDesign problem.

  Bisher habe ich keine Lösung found, weder bei Adobe, Apple, Wacom noch.

  Bin ratlos!

  

  For my part, you are invited, Kate.

  And congratulations.

• iMac 4K, photoshop, flashing, flashing in black using brushes... someone knows how to fix this bug? Thank you in advance! and happy new year guys!

  iMac 4K, Photoshop flashing, flashing in black using brushes... disgusting question that kills the concept of purchase iMac for serious Photoshop work... someone knows how to fix this bug? Thank you in advance! and happy new year guys!

  Do you use a 10.11 OSX. * compatible version of Photoshop? At this stage, it would Photoshop CC.

• I was using my MacBook today and it crashed and the dock turned silv, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock turned

  I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
  OS El Capitan

  This can help:

  Reboot safe mode (it is a slow process):

  -stop of the mac

  -Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go

  -When everything started, connect

  -Once connected, stop the mac once again, nothing else is necessary.

  -restart normally.

  Lex

  PS: This clears all system caches.

• I have a laptop acer 5552 on windows edition Home premium... .He crashed and a friend used windows 7 ultimate to run again how to make Home Premium return on it

  I have a laptop acer 5552 on windows edition Home premium... .He crashed and a friend used Windows 7 ultimate get back to work how to make Home Premium back on that I do not have the disk backup I lost it

  Hello

  • What were the changes made before the problem occurred?
  • What happens when you start you computer?
  • Are you able to boot to the desktop?
  • You receive an error message?
  • If your friend has installed Windows 7 ultimate or just fixed the crash problem - was - it own installation\custom?
  • What version of Windows are you using?
  • When you say "windows home premium" are you referring to Windows Vista or Windows 7?

  If you are able to boot to the desktop, you can check the version of Windows.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
  Response with more information.
  See also:
  http://support.Microsoft.com/kb/555375

• computer crashed, used the backup to restore, formated instead and charged in the State of origin. any chance to recover photos lost at this stage?

  computer crashed, used the backup to restore, formated instead and charged to the State of origin, no chance to recover lost photos at this stage?

  Hello

  It is a good free program to recover data. but no guarantee.

  http://www.Piriform.com/Recuva

  You may need to contact the data recovery specialists, who are very expensive.

  See you soon.

  p.s., You use your computer, the less chance you have of data recovery.

• Desperately need help with simple program crashing using Qt and stdlibc ++

  I have a really trivial example that I was unable to get it running no matter what I try. I use ndk2.0.1. The configuration to recreate the problem is simple; the project should link to qt (4.8.2) and stdlibc ++ (not libcpp, libstdc ++).

  (main.cpp)

  #include 
  #include 
  int main(int argc, char *argv[])
  {
      std::cout << "This doesn't work\n";
      return 0;
  }
  

  That's all. You can use any toolchain you want (ntoxg ++ or CQS), seems not to matter. If you use the string of tools qcc, you must explicitly include the paths libstdc ++ and link to him, because it uses default libcpp. Build the project: it should compile correctly. The handle bar I used is here (http://pastie.org/4018541).

  Create the folder bar and deploy. Once I have started the program at this point, it show me the splashscreen for a few seconds and quit (crash)... You will notice:

  * No log output (we expect something of the call cost)

  * a nice base file pending crash

  Browsing the ntox-gdb core file gives you:

  #0  0xb8b5e329 in __gnu_cxx::__exchange_and_add (__mem=0x0, __val=-1)
      at atomicity.cc:36
  36  atomicity.cc: No such file or directory.
      in atomicity.cc
  
  (gdb) backtrace
  
  #0  0xb8b5e329 in __gnu_cxx::__exchange_and_add (__mem=0x0, __val=-1)
      at atomicity.cc:36
  
  #1  0xb8b03471 in __exchange_and_add_dispatch (__val=,
      __mem=)
      at /home/builder/hudson/650-gcc-4.4/svn/linux-x86-o-ntox86/i486-pc-nto-qnx6.5.0/pic/libstdc++-v3/include/ext/atomicity.h:79
  
  #2  _M_remove_reference (this=)
      at /home/builder/hudson/650-gcc-4.4/svn/linux-x86-o-ntox86/i486-pc-nto-qnx6.5.0/pic/libstdc++-v3/include/bits/locale_classes.h:505
  
  #3  std::locale::~locale (this=0xb837d5fc, __in_chrg=)
      at ../../../../../libstdc++-v3/src/locale.cc:89
  
  #4  0xb8b0faa9 in ~basic_streambuf (this=,
      __in_chrg=)
      at /home/builder/hudson/650-gcc-4.4/svn/linux-x86-o-ntox86/i486-pc-nto-qnx6.5.0/pic/libstdc++-v3/include/streambuf:193
  
  #5  std::basic_filebuf >::~basic_filebuf (
      this=0xb837d5e0, __in_chrg=)
      at /home/builder/hudson/650-gcc-4.4/svn/linux-x86-o-ntox86/i486-pc-nto-qnx6.5.0/pic/libstdc++-v3/include/fstream:215
  
  #6  0xb0bbd205 in __cxa_finalize ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libc.so.3
  
  #7  0xb832de67 in _btext ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libcpp.so.4
  
  #8  0xb836a265 in _fini ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libcpp.so.4
  
  #9  0xb0bd46d3 in ?? ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libc.so.3
  
  #10 0xb0bd5d38 in ?? ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libc.so.3
  
  #11 0xb0bbd052 in _cleanup ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libc.so.3
  
  #12 0xb0bbd337 in exit ()
     from /home/preet/bbndk-2.0.1/target/qnx6/x86/lib/libc.so.3
  
  #13 0x080487b0 in _start ()
  

  I have no idea what to do with this stack trace and I was not able to debug the problem more far.

  This question is particularly messed because I did not add any code to Qt on demand; just link to bookstores. Do not link to the Qt libraries will make this piece of code will work perfectly. A link to the Qt code with libcpp instead of libstdc ++ will also code to run as expected.

  This problem has been driving me crazy for the last days coueple and I would really really appreciate help or advice.

  KDAB guys told me it's a bug and they're looking into it.