Suddenly have a problem starting LabWindows CVI 7.0 on XP system

Similar Questions

• How to remove the additional window when I start LabWindows/CVI or will execute my program?

  For a short while (maybe a week or more), I get a small extra window behind my request. Also, when I start LabWindows/CVI, I get the same window. It is a small blank window with the same title as the application. Press close (X) closed the application too.

  I don't remember seeing this before and that he doesn't know what has changed on my PC. It also happens with old LabWindows (previously compiled) programs, it seems that something in Windows has changed.  I use Windows XP and LabWindows/CVI 9.0.0 (348).

  Thank you

  Rob

  Hi Rob,

  The window that you see is part of the CVI. It is the parent window for all windows of the CVI so much in the environment and execution. As a general rule, this window is hidden way off the screen so that you don't even know it's there. But some video cards have a parameter that requires all windows off the screen to move to the screen. Take a look in your video card settings to see if this setting exists on your pilot. If so, then disabling the setting will allow the window to hide off screen.

• I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." 0x8002801D error

  Error of the IDM

  I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." Error 0x8002801D in windows XP. Pleasw help to y for remedy.
  Thank you

  Hello

  (1) what you're trying to download?

  (2) how you try to download?

  (3) what browser you are using to download?

  (4) don't you make changes to the computer until the problem occurred?

  Step 1: This error occurs when your browser and IDM are set to run under different privileges.

  Maybe you have set to run IDM with administrator rights. This is not correct. IDM Ouvrezledossier if please, right-click on 'IDMan.exe', select the 'Properties' menu item, switch to the "Compatibility" tab and uncheck the checkbox "Run this program as Administrator" (arrow 2 on the image). In addition, you must remove the compatibility with previous versions of Windows if there is none activated (arrow 1 in the picture).

  

  If this does not help, try to do the same for the executable file of your browser. In addition, turn off the feature with older versions of Windows and "Run this program as Administrator" checkbox.

  Step 2: You may need to run IDM with administrator once rights to register its DLL files. Exit IDM using "Tasks-> output" of the main menu. Then right click on IDM launch icon in the Windows (arrow 1 in picture) programs launch menu and select "Run as Administrator" (arrow 2 on the image).

  

  Then exit IDM again and run normally.

  Hope this information is useful.

• problem with LabWindows CVI

  Hello I m trying to create a Setup program for an application created in a previous version of Labwindows CVI which one don't know locks I get just the file sources, I m working with the 2010 version, the problem is that the application is running in debug mode but when I run in release mode the application does not work only the icon in the taskbar is indicated but the GUI never appears, someone can help me with this

  Thanks for your help, the problem was not with the code and was not with the RT engine version, was a misconfiguration in the compilation release configuration, I myself do not add external sources dll´s and lib´s in the plug-ins option in the settings of the target

• I have a problem starting up a Windows XP Pro Machine virtual Windows 8 host system (which has VMware Workstation 10.1).

  I am new to the virtual machines.  For several months I've been running a Windows XP Virtual Machine in an old machine of Windows 7 with VMware Workstation 7.0.  The hard drive is having some problems at times, so I thought that I could move the virtual machine on a new computer that has an OS 8.1 Windows and VMware Workstation 10.  For example, on the Windows 7 machine, I copied the directory with all the * .vm files and pasted into the machine to Windows 8. But when I tried to start VMware Workstation 10 in Windows 8 machine, I got the message "this virtual machine policies are too old to be run by this version of VMware."  I went to the knowledge base and used the solution described here: I've deleted the lines of three 'policy' of the .vmx file and added the suffix .ancien to the .vmpl file, which actually disabled.  Now, when I try to start the virtual machine, the black screen appears with the VMware logo in the Center and everything seems fine, but Windows XP starts.  And logo VMware guard churning away as in a continuous loop.  It is not easy to stop.  The only way to stop VMware is via the Task Manager or restart the machine.

  What must I do to get the Windows XP Pro VM to run in the new machine?

  VMWare technical support suggested that I have disable 3D acceleration (VM > settings > view and uncheck the box 3D graphics acceleration).  The virtual machine starts now with some minor problems, but it is usable.  But by closing accel 3D turns, in the words of the Technical Support Engineer, David, that there is "a problem with the graphics card not imitate or through its capacity to the virtual machine.  In other words do not support to the VM guest 3D acceleration. "My next step is to make sure that I have the updated driver for the Intel HD Graphics 4600 display adapter.

  Minor problems are:

  (1) the virtual machine works best in screen mode reduced.  There are a few problems speed mode full-screen.

  (2) the VM will still work after switching on of the host.  But after execution of the virtual machine, if power you the virtual machine and the release of VMware workstation, then later, start the workstation, the virtual machine will power not.

  To turn it on again you must out of VMware Workstation, disconnect the host machine and then reopen it in one.

• I update the updates of microsoft and now I have a problem starting my computer to start.

  I have to press f2 at startup to reset the default to start the computer what are conflicts with updates here's one continue to appear kb973593, kb973704

  Hello

  Set the BIOS to its default settings.
  Make the HARD drive as the first device in the boot pririty list

  It would work very well.

• Problem starting for the Service of Notification of system events

  Computer Vista Home Basic.

  The SENSE is reported as won't start do not.  Looking at the Services screen we're still in the starting state.

  How can he start correctly?

  Hello

  First thing I'd do is uninstall all the HP software, eliminate him as possible points of contention. If possible, also do a system restore to a point before for the initial installation.

  This service would not affect internet connection as such, it watches DCOM, it is not fire events to network. My thought is that the HP software has caused a problem with DCOM, then removing is the first step. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Problem starting & update

  Have a problem starting recently and after several attempts need to initialize the window in blue screen mode start Window normally. Please let me know how retify this problem.

  I have receive Wndow Vista update KB978601 977816, 978338, 979309, 980232, 979683, 981332 & 905866 041310 dated.
  I'm unable to update in my computer and received the 80070643 error message. Entered in the pages of the administration tool to do everything recommended such action, but the problem still exists. Always impossible to update the recommended security updates.
  Help, please.

  Yeo,
  It seems that if you have problems that are not related to Windows Update.  You can run the following tools and see if they find any problems.

  Disk error checking

  System File Checker

  The system update tool

  Those who run and then post back with the results.  Also post the blue screen error if you get another.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem starting on the new ACER Predator G9-791-73N7

  Hi guys!

  I have a problem starting on my new laptop that runs 10 64-bit windows.

  I tried to reinstall windows and my first boot options is the HARD drive so why my laptop still shows me this screen? If I am connected to the internet, the process takes more time before entering the screen windows... is there a fix for this?

  Thank you!

  

  Hello

  Go to the Bios and disable start-up networ.

  Take windows as first boot device boot manager. If it isn't there, you should do a propper EFI install.

  Steve

• I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS. SYSTEM HAULT CODE IS; CNU9243TDY

  I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS.

  SYSTEM HAULT CODE IS; CNU9243TDY

  ways to help

  Hello

  Try to enter: e9lo7vfati (3rd character is a lowercase L)

  Kind regards

  DP - K

• Hello!, my name is jan and I use lightroom 2 for many years. I have an original installation disk with a 24-digit serial number. I have never installed lightroom problems wih. suddenly lightroom won't start when I try an image I tak

  Hello!, my name is jan and I use lightroom 2 for many years. I have an original installation disk with a 24-digit serial number. I have never installed lightroom problems wih. Suddenly, lightroom will not start when I try an image that I have taken with my nikon D500 and transferred to WINDOWS 8.1.  I tried to re - install lightroom: the application procedure serieal number, but refused to accept the number that has always worked. Help, please!  Jan

  If you are certain that you have the correct number of series, there are really not much that we can help you here. You can try to download and install the latest version of Lightroom 2. This will be the trial version, but when the trial screen there is an option to indicate that you have a serial number. Either way, Lightroom serial numbers start with the four first digits being 1160.

  Adobe - Lightroom: for Windows: Adobe Photoshop Lightroom 2.7 - English, French, German

• LabWindows CVI Full recommended OI does not start

  I made an installer of deployment Teststand-2013. On a target PC (Windows 7 64-bit) it works fine. But on another target PC starting the Labwindows/CVI Full IO recommended (attached screenshot) fails with an error-145 when trying to load testexec.uir. Both targets have Windows7 64-bit and Office 2010 installed. How will I know what ActiveX control is missing or damaged on the second PC?

  I found http://digital.ni.com/public.nsf/allkb/9894BE2B832B7FDE86256ECD00041172. But the Office is installed, and ActiveX Control Pad is obsolete and incompatible for Windows7 64 Bit and is no longer available from Ms.

  mkossmann,

  You can use the option "Hide the license dialog box" on the Installation Options tab. This will not prompt the user to activate TestStand until they try to open the software after installation. What is the desired behavior?

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues.

  I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues. I can navigate only to go up and down with the arrow keys.

  What version of Pages is running on your MBP?

  What version of Mac OS X is running on your MBP?

  The MBP is not iOS running.

• I lost the menu bar/task start, how to make their comeback? I tried to uninstall and reinstall without success, the other user on my computer does not have this problem.

  Yesterday, I went on the site for computers levno, help my web access to my work email. I opened the page to display the output items and was never able to get back out of it. Finally used ctrl, alt, delete and completed the task. After that, the what's my taskbar looks like, I can't resize or exit using the tabs at the top or at the bottom, they do not display, nor is starting to show in the lower left corner, where I like it. I tried to uninstall and reinstall did not help.

  This has happened

  Each time Firefox opened

  == July 9, 2010

  Hello Sher.

  If you are talking about the menu bar, press ALT or F10 from your keyboard to make the Menu bar temporarily visible. If you want it to be visible at all times, go in view > toolbars > Menu bar, or right click on the Navigation bar (for example, the Reload button), and then select menu bar.

  If this does not help, right-click the navigation toolbar, select Customize... and click on restore by default. If it does not immediately appear, try pressing ALT or F10. You can enter in view > toolbars > Menu bar to make it visible at all times, or with the right button of the Navigation toolbar and select menu bar.

  If none of this helps, you may have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Try to disable all add-ons (just to see) to see if Firefox goes back to normal.