Suddenly, IncrediMail does not work properly. When you click on an email that internet Explorer tried to open
Original title: corruption of the probably the key ".htm" registry is damaged or missing
Suddenly, IncrediMail does not work properly. I click on the message and get nowhere. It seems that it is trying to go to IE and can not find the web page. I searched everywhere on the internet and saw where others had the same problem, but I can't find the fix. One person suggested it be referred to Microsoft as a "failed to open local html file with IE' problem." I guess maybe that's a problem with the registry, but do not know how to fix it.
I can not even do a system restore or reinstall the IncrediMail program.
For assistance please ask for help in the IncrediMail Forum
IncrediMail Support Portal:
Directly in contact with the IncrediMail support team, click here
My 5s, IMessage iPhone does not work and when I try to activate it by electronic mail, the box opens, but I hit the sign in button and his stays there as it's frozen! Someone help me please find a solution
My 5s, IMessage iPhone does not work and when I try to activate it by electronic mail, the box opens, but I hit the sign in button and his stays there as it's frozen! Help
A deal with this * day. Only thing that worked was plugging it into the computer, it supported up to the computer. Do you have a reset, and when that went to spend he asked me to do an update "carrier". If you're on verizon? My co worker and I have the two are facing it today
ReadyBoost - Cache problem!My Readyboost does not work. When I click on dedicate to Readyboost, it gives me an error: failed to create the cache. The process cannot access the file because it is being used by another process. Help!
Did you change your computer?
(a) click on the 'Start' button, then click on 'computer '.
(b) right click on the USB drive or flash memory card that uses Windows Ready Boost, then click 'properties '.
(c) click on the tab "Ready Boost" in the 'Properties' window to the memory card or the USB drive.
(d) select the title radio button "do not use this device ' then click on 'OK '. This step should remove automatically the Ready Boost cache on the device. If you are unable to use the full capacity of the device, proceed to the next step.
(e) double-click the memory card or the USB drive.
(f) right click on the file 'ReadyBoost.sfcache' and then click 'remove '.
(g) click 'Yes' to remove the ReadyBoost cache.
Reconnect the device ready boost which allows the service to boost loan which will create the new cache.
I suggest you to follow the links and check out them.
Check your hard drive for errors
Turn ReadyBoost on or off for a storage device
Using memory in your storage device to speed up your computer
I just bought a Genuis 5005 5.1 audio sistem and I have a problem with him: it will not work properly when I get on the internet (the center speaker does not work).
I also bought an Asus Xonar DG 5.1 soundcard which works perfectly. I installed and also installed the driver for it.
When I play music/videos to my hard drive, all speakers work fine, but when I enter the internet videos/Music Center speaker does not work...
I hope someone can tell me how to solve this problem... Thank you
Later edit: I managed to solve the problem by selecting the "2 channel" option in my sound card driver.
I managed to make it work with my audio driver 2-channel. Thank you for your time :)
Taskmgr.exe does not work. error when you run gpedit.msc: "one or more activex controls could not be displayed either...". "- old deleted restore points.
Dear all, Hello, hope you are doing well.
My thinkpad t42 machine with xp sp3 OEM has a problem, unfortunately.
Task Manager is not running. A small timer appears when ctrl + alt + delete is pressed. nothing happens. Taskmgr.exe fact exists in the system folder. This has been verified. The same thing happens when you try to start the program via a double-click; nothing.
When checking to see that the Task Manager was not blocked under the administrator account, there was an error in the gpedit.msc program - namely:
internet Explorer: "(one or more ActiveX controls could not be displayed because either (1) your current internet security settings prohibit running ActiveX controls on this page, or 2) you blocked an editor of one of the controls." As a result this page may not display correctly. "It is a double popup as well. When you press ok, the same error message box appears again. Reset all settings of security of IE8. Made no difference.
the same error message is produced with the software lenovo "thinkpad update" - once again in the framework-
Someone (not me) downloaded a program called "personal internet security ' on the machine and also a"registry fix"program that has an icon of similar colors to the windows logo icon, but the colors were reversed (the name of it escapes me) - these programs pourrait the root of the problems and why the machine does well.
To solve; First, Avast has been run on boot to the top, and about 8 programs have been removed. (Some of these programs may have been dependent on or related to another...)
Then, microsoft's free antivirus has been downloaded - but - it wouldn't install, giving a general error. The same error was given, for Microsoft security program, when Avast was uninstalled.
A Microsoft security scan is run from the Web site then, and he says that the computer is virus free, even if it has changed some previous registry changes.
To fix the Task Manager, difficulty in registration of Microsoft was found to be proposed here -http://support.microsoft.com/kb/907343 - but then there was a '0' already in the field.
Having become frustrated with all hacking around records etc, it was decided to go to an older Restore Point. The last of them visible was in December, and it would not actually go to these old restore points. The error said: Please try a different restore point. Having received updates xp at the same time to that, these restore Points have unfortunately disappeared and no restore points exist where the system is stable.
If someone like me that the machine still has something?
If someone could suggest a solution for me that would be great and would really make my life less busy in trying to solve this problem - my area of expertese is certainly not it if someone could help me it would be very much appreciated...
The process of deletion for Personal Internet Security 2011 is well documented.
It is not some ' try it or try things "and see if it works the kind of process.
You won't fix with Avast, and a large number of malware just laugh at all Microsoft malware detection and removal products. There is little to fear Microsoft analysis tools. I can get my system on purpose infected two dozen ways and Microsoft will tell me that there is no problem.
Removal and detection of malicious software is not Microsoft expertise area. There are businesses where malware detection and removal, it is their area of expertise, and that's all they do throughout the day, so you better stick with them for the easy stuff.
You will not fix your system and try things or any amount of piracy. It will fix you knowing what you're doing and using methods that other people have already understood by the practice and the real real world situations.
If you want to remove it and do not have to reinstall your XP, you should consider going to a forum where malware removal experts hang out. You know... people who really know how to actually remove the stuff and did it successfully.
This means that people have got their systems infected by the malware on goal several times and practical detached until they understand the malware and how it works well enough to write a removal procedure. They did try them all things for you.
You can mess around with other things to try that perhaps sometimes could work, or you can follow the procedure who already figured that will work all the time.
If you faithfully follow the removal instructions and you still have questions, there is link at the bottom of the instructions for further help. Although everything that has already happened or attempted to apply may have complicated your situation beyond the reasonable expectations of repair.
Here is the link with the instructions to get started:
It's my contention that, once your system gets afflicted by malware of this magnitude, you should not trust any of current Restore Point. When finished remove malicious software, all your Restore Points are not trustworthy and you must knock out all and start over with new Restore Points.
If you want to get your task manager will, navigate to c:\windows\system32 and make a taskmgr.exe and call the copy something like jose.exe.
Then you will be able to launch jose.exe (double click), and the Task Manager opens. The malware will not allow taskmgr.exe to be a running process, because he knows that's what you use to try to remove it. So far, malware knows no jose.exe (this may change).
You will probably like Process Explorer better when even when you get the hang of it, but you can get your task manager go.
Do, or do not. There is no test.
I decided to implement the points for a new puppy instead of a pony!
Dear user of the Adobe Captivate Forum, I use Adobe Captivate 8. I created a slide with eighteen TEB on a slide. User must confirm with the Enter"" key. If the user tried the first time, it works great. The results of Quiz Slide, I gave the user the opportunity to try again. After a few field blocking the system. Sometimes she only maybe it happens after 7 fields, sometimes, it happens after 9 fields. It's always different. I had this experience by testing with an executable file. I tried on different computers. In the Quiz results slide, by activating the slide, I have the top variables to 0. There are no specific options in all areas. Could you tell me your experience or send me a feedback? Thank you very much for your efforts. Cordially to Leobersdorf in Austria.
ICH muss mich entschuldigen, Gerhard. I do not work for Adobe, just a user of Captivate (freelance consultant/trainer), I cannot accept the debug files. You can post screenshots, or more details in this forum and I'll try to help out you.
I am using the following tag:
<? If: TASK_STATUS = "Open"? > < xdofo:ctx xsl: attribute = 'block' name 'color' = > red < / xsl: attribute >
<? end if? >
to change the color of foreground text which, according to some conditiosi, need to print in
PDF format using xml and rtf files reports.
But I was able to get only 3 colors (red, blue, green) to use, other colors such as orange, cyan etc are not
Please let me know what all the colors are supported by oracle in printing to PDF using xml reports.
Indicate if we do a few things related to parameters or so.
I'm usning 5.6.3 XML version.
Colors can be expressed by a known name and a hexadecimal value. The hexadecimal format is widely used in HTML programming and has a format of #abcdef, and "abcdef" may be as aaddcc values and so on. For some primary colors, you can get away with #abc, but this is not very common.
You should always design with colors Web safe in mind. That limited to 16, but should be much thinner (more all 16 have known names like red, cyan, yellow, etc.).
http://www.w3schools.com/HTML/html_colors.ASP has a good explanation of the standards.
I use a pc dell dimension 4700 (os is XP, service pack 2)
fire fox 7, uninstall and re install but problem not solved
no problem if I use internet explore
This problem may be caused by the Yahoo! toolbar as scopes as well down and covers the top of the browser window, allowing links in this part of the screen not clickable.
Problem seen in Google search engine.
I used Google for years without problems - I work from home as a freelance journalist. But this last few days, if I search for something on Google from IE and click on a result, I can get the page I want upward. But then, if I want to go back to the same Google search page to check the other results, I can't go back by clicking on the button 'back' at the top left, as I always did. If I click it, it just keeps returning me to the page I'm already. I find no mention anywhere using this problem or any means to remedy. If I have the cursor hover over the arrow bak, the address of the current page appears rather than the original Google search page, so there is obviously something wrong.
1. This only happens with Google?
2. don't you make recent changes?
I suggest you to follow these steps and check if that helps:
Try to run Internet explorer mode without modules and check to see if the same problem happens:
Try to optimize Internet explorer and check to see if it helps:
It will be useful.
Tried to run the system restore, but it will not restore.
Hey AnnEdelstein,Because you can't get the system restore to work, perform a clean boot on your Windows XP system. The guide to that is here. Which follow, and then try again to Outlook. If it works to the minimum, then boot in the boot, analyse the whole system with your Antivirus and other security you have.Also make sure you have the drivers for the keyboard. Search for the manufacturing of the keyboard, and they should have the drivers on their support site. I hope this has been helpful!
I use the match pattern to retrieve a string NULL completed a response, I'm getting a device on a serial port. The VI is attached and here is a screenshot of the block diagram.
It works very well with the index value 0, 1, or 2. When index is 3, I get the result below.
Why model matching is not finding the null character?
I'm Datura, need to remove the cable from the shift control for the control of the match pattern.
Start labview, so fix that will probably teach me a lot. Looked and saw a lot of posts of things only work in games of the run mode, but nothing like this. I have attached the relevant real-time and FPGA VI.
The code is supposed to read a motor encoder. When ran regularly, it works somehow. It will update the counter of how sporadic all few seconds a fraction of a second. When ran in climax run mode, it appears really up-to-date. After that matches the execution mode is canceled, it works perfectly. Can someone find out what could be the problem?
Ended up staring at me. I am sure that the problem was that if there is only one element in the FIFO when it checks first, it eliminates the two elements when the FIFO filled.
Fixed it by adding a test for the number of items before and reading only if there are enough items to read. Attached file sets for reference.
I have still no idea why he was running after delivery to highlight in the first place. We will never know. Bonus points for the answer = P
WE use an email to the same address as the website, IE [email protected] and the site is johnblakecpa.com
Is it not enough?
For now, I removed the form, after complaints from customers.
Contact forms need some 'PHP' processing on the server side.
And using this verification to ReCaptcha can cause additional problems.
I just checked with MacHighway, and they require a special action to let the html pages to go through this process.
Pages with the normal "html" extension are not processed by default (only those with php are processed). Check out his page for assistance: How set PHP to parse files with the extension .html - knowledge base - MacHighway
Another useful source is this page: Troubleshooting Muse form used on the servers of third party Widgets
I hope this helps...
When I click on the tab 'new' button, or when I click on 'file, new tab' that does not work, also when I click ctrl + T he opens a new tab. I miss my tabbed browsing - ideas?
I recently upgraded to firefox, but this problem started yesterday, before the upgrade. I was hoping that the update would fix it, no luck.
This is a problem with the Ask.com toolbar (Tools > Modules > Extensions)
All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
I have checked all the updates of Windows, said that I installed all available updates. Help, please!
First manually check the updated drivers with ATI and ask their support and Forums on all known
questions. Use the methods to update the following drivers.
Download the Catalyst Drivers here
ATI - Support and drivers
Other troubleshooting methods would include the boot minimum and others who might help determine
the cause and eliminate problems.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
How to troubleshoot performance issues in Windows Vista
Optimize the performance of Microsoft Windows Vista
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).
How to check and change Vista startup programs
A quick check to see that load method 2 is - using MSCONFIG then put a list of
Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
There are many excellent free tools from Sysinternals
-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
There are many excellent free tools to NirSoft
Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
Many excellent free tools and an excellent newsletter at Karenware
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.
Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
How to install a device driver in Vista Device Manager
If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.
How to disable automatic driver Installation in Windows Vista - drivers
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
Problems with the overall speed of the system and performance
Performance and Maintenance Tips
Explorer Windows stopped working
Hope these helps.
Maybe you are looking for
By default, the new screen tabs must be empty, as if it was always. I don't want a work autour, or having to mess with it. I DON'T want to see google, or any other product, appears by default when I open a new tab. This will be as the strong arm of t
I noticed two other users have the same problem. What about the?Thank you
Hey there Hopefully, someone of you can help me because I had the following problem: What I have is: -labVIEW 8.5 -a microscope AFM. From there, force a measure data are transformed throug several steps (all works very well), and thus I get a 1 d 16
Hello I have a printer HP Deskjet 3054 A and I'm on Mac OS X Lion 10.7.3. Today, while I try to print a document, the pages printed on paper crooked. I tried to use snap to the HP utility application, as well as the option on the printer, however whe
How can not run my Search Desktop feature in Windows XP. How can I reactivate it?