Suddenly turn off Satellite 1900-303

Similar Questions

• Satellite 1900-303 turns off for no apparent reason

  I got my Satellite 1900 303 for about 2 years and no problem. In the last month, I had a problem with him turn off his car suddenly and for no apparent reason. I checked virus and have found no virus. Can anyone suggest why I did this. I was wondering is that he has been making overheated?

  Thank you

  Hello

  Believe me, there is always a reason why this happens. From your description, I assume that your unit is overheating. If the temperature is too high the unit simply stops.

  You need to clean the device. After that cleaning the unit should work properly again.

• Satellite 1900-303 Touchpad: has stopped working

  The touchpad on my Satellite 1900-303 has suddenly stopped working for no apparent reason. The touchpad icon has disappeared from the office toolbar & I do not see the touchpad listed in Device Manager. However, the ALPS touchpad driver is listed in the installed programs.

  The laptop runs on XP Pro SP2. Can anyone help with this please?

  Can you imagine that the TouchPad is defective and this may be the reason why it doesn't work?

• Satellite 1900-303 will switch

  For some reason, my Satellite 1900-303 lights no more.
  The old battery would claim to be charged and yet it wouldn't turn on.

  I bought another battery, but this has not yet resolved the problem.

  Can anyone help?

  Connect the laptop to the AC adapter?
  Please note that a new battery is not charged and before you will be able to use this battery you need to load!

  If the AC adapter is plugged in but the laptop does not start always then you must remove the battery, unplug the AC and must wait about 15-20 min.

  After this short period connect everything again and try to start the laptop!
  If it does not help there is not a lot to make :(
  In most cases, the hardware failure causes these questions and help of the technician is needed!

• Satellite 1900-303 cdrom problem

  Hello

  Sorry for my bad English, I'm learning :)

  I have a Satellite 1900-303, windows xp home edition.

  Sometimes, when I try to copy on CD ROM, some, for example, to music whith the multimedia player, trial everything is ok, but in the end... no file :(

  The system error saying:
  El device, \Device\CdRom0, has a blocking Lillies.

  What can I do? Thank you very much

  Sorry, but this error Message is not in English!
  You can try to translate it?

• P20 - 552 suddenly turns off...

  I have a P20-552 (PSP26E-025E9-S4), which is about 18 months old and has recently started to misbehave.

  In particular, after a few minutes of intense tasks of processor (made of video file) it suddenly turns off. No warning signals sound, messages - just stops. Very worrying - anyone any idea why? Fortunately, the warranty is not exhausted until 2007.

  Another question, every few weeks or so I discovered that when starting, the keyboard simply does not. The mouse is fine as everything else, is as far as I can see. Until now, a simple reboot has solved this problem but this indicates that there is something wrong deep down or is this something we are supposed to live with?

  Thank you very much in advance for your suggestions and help.

  Brian.

  Hello

  Well, it could be a problem of overheating if the appliance stops without any messages. The temperature is high, if the CPU works with high efficiency.
  In this case the first that I can suggest is to check the ventilation openings. Try to I clean with your vacuum cleaner.
  It's not easy to say why the keyboard problem. He s strange because after the OS restart the keyboard works correctly. Well, maybe a new OS issue. But it's only a suggestion.

  Concerning

• Satellite 1900-303: biosinfo.inf failed or damaged BIOS after update

  I tried to update my bios now says:
  "windows was not start because the following file is missing or corrupt: \windows\inf\biosinfo.inf'.

  It's a satellite 1900-303... don't know what to do now.
  If anyone can help it would be much appreciated.

  Hello

  Please take a look at this document from Microsoft:
  Biosinfo.inf is missing or corrupted error message when you upgrade to Windows XP

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;829784&product=winxp

  Maybe it will help you.

• problem with cd/dvd on my Satellite 1900 303 drive

  Hello world
  In 2003, I bought a Satellite 1900-303. Recently, it's the cd/Dvd drive has stopped working properly. whenever I put a Cd in the driver, it assumes that the CD is an audio cd. If the CD is completely cd Audio or partially contained audio files that it opens the cd with no problems. But if the cd is a CD or software for data CD after having tried long time my system hangs. I change the properties of the Cd drive settings in the section of AutoPlay of music file to other options such as "mixed content". but after inserting the CD in the drivers it agains automatically replaces the file 'music '. I showed my book expert in computer system and ease, he tried to reinstall windows XP to fix the problem but it did not work. Since the driver did not work he used the external driver to install windows XP. but the problem has not been resolved.
  Is there someone who knows by chance that I have to do to get it back?
  Waiting for useful tips.
  Vahed

  Hello

  your friend installed the XP from a Cd MS or on the Toshiba Recovery CD?

  To my Toshiba laptop computer, AutoPlay section is also set music file and working properly!

  When this failure occurred for the first time? Did you use the recovery option of system SM at the beginning - accessories - prog. -Recovery system
  Perhaps the backsetting of your system to solve the problem!

  You can also check if a firmware update is available for your car! (If it's a Toshiba drive go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

  Hans Bye

• Tecra S2 suddenly turns off

  Hi on board,

  My Tecra S2 Portable turns suddenly turned off. It turns even abrupt shut down when I put a cup of coffee on the table.
  When he turned off the LEDs in before shine more. I have to unplug and connect the laptop to get them turned on again again.

  When I restart the computer, very often the LED lights turn off after 2 seconds and I have to reconnect again.
  After several trial and error, it is possible to restart the computer again.

  Someone knows what's the prob?
  Thanks in advance for your help.

  Concerning
  JJ1

  Hello

  In your case, there is problem definitely contact and just small movement can be responsible for the loss of contact between the motherboard and soldered chips. You must understand that we are talking about Micro-millimetres.

  I guess that you know very well what happens if the material is cold and when the material is hot. After a few starts probably material will be dilated (temperature) and contact is here. As you can see after a few laptop startup can run well.

  I won't bore you anymore: it of clearly the hardware problem and either give it to service for repair or open your window and... you know what I mean :)

  I'm just kidding.

• Satellite 1900-303-type of RAM can be installed?

  Hi guys,.

  I want to know a news on my Satellite 1900-303.
  What type of RAM can be installed?
  I have a 266 mHz, but it is quite impossible to find now on the market at a good price.
  so can I get a 333 mHz RAM, or my laptop it does not recognize in a good way?
  Will it work? And how do I set the bus on the BIOS? (If I may...)

  Thank you
  Davide

  Hello

  Satellite 1900-303 can be upgraded up to 1 GB of RAM.
  This means that you can use 2 x 512 MB RAM max modules.
  The compatible RAM modules are:
  200-pin PC2100 (266 MHz) DDR SODIMM

  I think you could use 333 Mhz too, but if the FSB is set to 266 Mhz and 333 mHz will run only at 266 Mhz.

  Greetings

• Satellite 1900-303 - LAN issues

  Hi guys!

  I'm new here, so I would ask you to be understanding if, in the early days, I make mistakes...

  In any case...

  I have a s Satellite 1900-303 with winXp Pro, and I have a problem with Ethernet: first of all, my router software does not recognize the ethernet network card, second, I checked the activation of the Ethernet controller in the Panel--> System--> material, but she "says" I don't have the drivers for it.
  I don't know the brand.

  This is the original installed in this laptop. If someone can help me...

  Hello

  Have you checked the network adapter in Device Manager?
  Is it correctly recognized? Or did you see yellow exclamation points?

  Satellite 1900-303 is an older unit as well as drivers have been moved to the archive area.
  Check the Archive for driver LAN and if necessary install it again

• Updating BIOS for Satellite 1900-303

  I have a portable Satellite 1900-303.
  I downloaded the Bios upgrade the bios 20071126165418 but when I run the Check.exe he informs me that it is bad upgrade.
  But the text in the upgrade files include 1900-303.

  Is there a different model of the Satellite to the Satellite 1900-303 called simply 1900-303 or is it the correct Bios, please help.

  Hello

  I checked the page European driver of Toshiba and I found two different versions.
  There is a BIOS 1.80 and 2.10 BIOS. The two BIOS version are traditional BIOS.
  This means that the BIOS must be updated using the traditional procedure using a floppy disk

  But why do you want to update the BIOS?
  Is something wrong with your laptop?

  You know that a BIOS update is always risky, and it should be done only as the last option in the solution

• Satellite 1900-303: 2 location is configurable?

  I have a satellite 1900-303 and I ask someone to tell me, please, if the memory expansion slot 2 is configurable. If this is the case, for what? To share the video memory?
  I saw on a site that is configurable, but on the users manual is not mentioned that and I need to be sure before you buy another memory module.

  [Edited by: admin on 8 January 06 19:16]

  Hello

  Your device has no shared memory option and all of the memory is identified as system memory. Adding a new module of memory is very good idea due to the performance of the system.

  Good bye

• PCMCIA USB2.0 can operate in Satellite 1900-303?

  Hi, I have a toshiba satellite 1900 303 without usb2.0 ports, and I tested 6 pcmcia to USB 2.0 card 5 different manufacturers (investment, iconnex, sunix, conceptronic and a belkin powered) and the pc without exception hangs until I remove the card from the slot. Sometimes when I go into an external hard disk or a USB key, both directly connected to the card. However, I was able to transfer all the photos from my digital camera (30) to the computer laptop.

  I wanted that someone said if he managed to make the use of a pcmcia card to USB 2.0 in this model or similar and how, or otherwise shared his experience to not waste any more time with this, with things like format the pc or other. I am not a computer expert, but I think that there is no real certainty on this issue, let's hope I'm wrong.

  Thanks for looking

  I have Adaptec AUA-1422 cards in my Satellite 1805-S204. It works very well. It has firewire and USB 2.0. I understand that adaptec uses the NEC chipset.

• Satellite 1900-303 USB port not working - USB hub?

  Hello. Deploy a Satellite 1900-303 with two USB ports. One of the ports stopped working. I guess it's permanently broken. Just browse the site, it seems that the easient of thing to do would be to get a Port Replicator - one of them:

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/individualOptions.do?service=UK&selCategory=4697&o ldCategory = 4697 & OPTION_ID = 95631 & toshibaShop = true & t ab = 1 #1

  I wanted to know is it just to sink my remaining a USB port, so that I get 4 USB ports (and all others)? What USB speed I would get?

  Thank you!

  Rich

  Hello

  As far as I know the unit supports USB 1.1
  So I guess if you are using a USB hub external, USB ports work with USB 1.1 properties.
  Maximum data transfer should be 12 Mbps