Suggestion of a USB device for synchronization of a short Digital pulse with analogue output or periodic

Similar Questions

• Handspring Visor is a "unrecognized USB device" for Windows XP

  Hello World-

  I feel as if I have a career to synchronize my PDA hot! I used to hotsync regularly on my old HP Windows 98 machine, and now that I have this new (er) eMachines Windows XP Pro system, I got nothing but heartache. Here's the situation:

  My Visor Deluxe runs Palm OS 3.1H3, apparently the latest version which will work with it. The computer is running Windows XP Pro SP2. I have hotsync a few times when I got to the computer, but it has never been reliable. Now I surely CAN NOT synchronize! When I press the button on the cradle, Windows hotsync ALWAYS reports, "USB device not recognized" and of course the visor says he couldn't make contact with the office.

  HotSync manager is running (I have the blue and red arrow on the taskbar icon), and if I look at the Device Manager when I try to sync, is apparently trying to get the driver, he simply painted the same list. The list does NOT include the Palm, Handspring or unknown devices.

  I followed the directions "clean uninstall" I found on this forum and re-installed Palm Desktop 4.01. That worked once a week or two ago, but now when I arrive at the end of the installation, when I'm supposed to hot sync, I get the error not recognized USB.  I even tried to install Palm Desktop software version 6.2, but which ended up in a mess - I was getting errors like "Ordinal 23 could not bewildered because of the trajectory messed up', or words to that effect... I think it's ok for XP, but not "peripheral" as my trusty old visor :-)

  I know I should try to use the same configuration on another computer to be sure that the visor is ok, but I don't have access to another machine; In addition, the PDA has no other wierdness. Soft resets do nothing, but I don't want to try a hard reset until I get everything synced to the top! I am at my wit's end and don't know what else to try. I tried both my cribs and a number of different USB connections both at the front and the back of the PC. The USB hardware in the computer seems to be fine with everything else - mouse, camera, mp3, flash drives. I'm beginning to suspect that I need to plug with USB 1 and these are 2 USB, but I don't know how to check either of these things, or how "throttle" in the case, I have to use the USB as soon as possible.

  Thanks in advance to everyone that these figures. I'll be very grateful to have everything works again.

  Gary Benson

  I was with you until the end. I hate to ask, but could you clarify this just a little:

  Then, reinstall your Palm desktop from the CD and do a hotsync. If she asks
  for a user name and you synchronized your device before you put "test" If you "
  no sync before creating a hotsync name.

  Ok. I read three "if" statements, and try to understand what is meant here. If they ask you a user name AND if I synced before, AND if I do not synchronize before creating a hotsync name, I put in 'test '. Means I can't use the name I used for this camera? Or are you suggesting that, really, should I open Palm Desktop and create the username before I hotsync for the first time (after the new installation)?

  I * have * synchronized before, and I don't plan to sync until everything is set up right, which to me should mean that Palm Desktop is ready with a username to match your handheld.

  Also, these indications seem in conflict which advised you to in the first paragraph, where you said:

  When you install Palm desktop, skip the hotsync process and complete the installation. After installation, adjust the conduit in hotsync manager for handheld overrides desktop, then synchronize with PC. During the connection process, it will ask you a username, enter the same username which is located in the upper right of the screen on your handheld hotsync.

  It * seems * that what you say I have to do is:

  (A) clean uninstall - move data to safe places, uninstall, and then remove all traces of "Palm" and "Handspring" of the registry.

  (B) restart the computer.

  (C) install Palm desktop, but not hot sync again.

  (D) open Palm Desktop, add the user name (Tools/users) and set the lines for handheld overrides Desktop.

  (E) hot sync.

  Isn't it? Sorry to be so simple, but I want to make sure to proceed exactly right. Thank you very much for your reply and for your help.

  -Gary Benson

• I use a USB device for the first time. My computer windows Xp does not recognize. How can I fix this prob, and where can I get the info to fix it?

  When I insert my USB for the first time, it is said that it has malfunctioned, and windows does not recognize it. Am I missing driver for USB or what? I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

  I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

  Step 1.  Identify the make and model of the USB device.
  Step 2: Identify the version of Windows XP you have, including service pack (start > run > winver > OK)

  Although the following steps 1 & 2 you could get extra help, I suspect that the 'USB device' has indeed "defective" and you have to go back to where you got it and request a refund or a replacement.

• My USB device for Microsoft 6to4 adapter keep a malfunction?

  My USB device to map Microsoft 6to4 PLZ HELP keep malfunction!

  Hello

  1 did you change on your computer before this problem occurred?

  2 are. what device you referring?

  3. did you receive an error message?

  Method 1: Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: View the status of a device by using Device Manager

  The device status indicates if the device has installed the drivers, and if Windows is able to communicate with the device.

  To check the status of a device by using Device Manager

  1. Open Device Manager.

  2. double-click on the type of device that you want to display.

  3 right-click the device that you want, and then click Properties.

  4. on the general tab, the device status box displays a description of the current situation.

  Method 3: Update the device from Device Manager driver.

  1 right click on the icon my computer

  2. Select manage from the menu.

  3. Select Device Manager in system tools that are listed in the resulting display.

  4. right click on the device.

  5. click on the driver tab.

  6. click on set to update driver.

  7. at this point, simply walk through whatever other instructions you are given on the screen. This part of the driver update process can be different depending on the type of material that you update the drivers for.

  8. once the update of Windows Vista driver is finished, you may be prompted to restart your computer

• Whith USB Device error: "Windows cannot verify the digital signature for the drivers required for this device...". (Code 52) »

  Original title: open usb drivers problem

  My Dell laptop stops working with USB storage drivers. The removable driver icon is displayed in the devices window and printers with a yellow triangle around!
  I've tried different USB drivers and the problem persists. I tried troubleshooting, and it does not help.
  In the Properties window, I get the following message:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  I don't remember making any hardware/software changes and do not know how to solve the problem.

  You are welcome.

  Something seems not quite right so contact the store can be a good idea.

  Back to the initial problem as I understand it, is that when you insert an external drive, you get the error 'code 52?

• USB printing support is a USB device that is older and may not work with USB 3.0

  Separated from this thread.

  Mahesh,

  I had a same problem, followed your recommendations and everything worked fine for a day and a half. Now I get the same error again.   Are there any additional settings or changes I do that can keep it works?

  Thank you!

  Hello

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the USB device?
  2. the problem occurs only with a specific USB device?

  3. What is the brand and model of the computer?

  This problem might have occurred because of these reasons:
  1 USB drivers are corrupt.

  2. USB port does not work.

  3. hardware issue.

  I suggest you run the hardware troubleshooter to check if it helps.

  (a) press the Windows key + C on your keyboard to display the bar of charms.

  (b) type of Troubleshooting , and then click solving problems under settings.

  (c) now, type Hardware Troubleshooter in the option Search .

  (d) click on hardware store to run the troubleshooter.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• You want to know how VMware player has demonstrated in supporting printer HP LJ P1100w USB devices for example.

  Original title: VMWARE Player, what went right?

  All of a sudden, VMWare Player [Win XP it] recognized and installed my printer HP LJ P1100w.  This, after being informed by them, by phone, that this freebie version does not support any usbs in addition to human and internal interface.  So, I decided to try to install my Deskjet 5400. I got a download HP upgrade package, uninstalled the existing software and Lo! VM has ask me to cut the host device and install it. Test page printed.

  What I want to know, since I can't get the response from VMWare, is how is it? There have not been updated for ages.

  Anyway, this avoids everything that copy/paste, drag and drop and no quality control before submitting the. PRN to Frogmore Rawprint.

  Hello

  VMware technical support technicians will be better placed to provide you with information:

  Assistance to Support VMware

  Hope the helps of information.

• Windows Media Player doesn't recognize the phone error"is not a connected device: for synchronization

  For months, Windows Media Player recognized my Samsung Galaxy SIII without problem. For weeks now, however, he is not picking it up. My computer detects the device when I plug it in, and made my phone. But when I try to sync the music on my phone, Windows Media Player says that I don't have a device so sync is not an option. In addition, there is no option in advanced settings on the Synchronize tab, so I have no idea how to solve the problem. Manual and automatic synchronization does not work.

  Hello, Olivia,.

  Thank you for keeping us posted.

  Even if the phone is recognized on the computer, sometimes bad or corrupted SD/flash card card can cause this kind of scenario on Windows Media Player. Try to disconnect the SD card and check if the Player sync with the phone. Also check if another device appears under the list of devices in Windows Media Player. For troubleshooting, you can also uninstall the software of the phone (Samsung kies) and reinstall them.

  Please let us know if the problem still persists.

• Can I get the IP address used by other devices for synchronization?

  One of my machines was stolen. I wanted to know if I could find it using the synchronized information. I hope that there is a way to determine the IP address, and then contact the owner of this IP block to see if they can help me more. Is this is possible, and if so, what steps should I take? Thank you.

  It is a question that we receive from time to time, and no, this is not possible. Please contact the police for your inquiry.

• Please give me a link for the driver for his usb device for vista device WD

  my book essential 3.0 in vista cannot install, where like WD package compatible with vista

  Hello

  This is thye link to Western Digital Support

  http://support.wdc.com/

• unknown usb device for dv9910us

  Webcam and dvd not working not not help plas

  Hey Paninah,

  What you trying to do with the DVD drive? Just play a DVD or burn a? Also what operating system are you currently using? What application you use to access the webcam?

  Thank you
  Sean

• usb device Bluetooth does not work on my laptop with windows 7

  I tried so manytimes for install my USB bluetooth, but it won't work. He goes on to say that he was not able to install the driver correctly. What should I do? because I changed the laptop and turn it on again and it will always say the same thing. Please explain what I can do to make it work please

  Hi chris,

  See the article following some additional troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• NI-VISA takes a unique I.D. number for each USB device?

  Hi all

  I'm relatively new to LabVIEW and VISA Toolbox.

  When you communicate with LabVIEW and a USB via VISA, VISA shoots a D.I. unique number for the USB device for each connection established?

  I have reference: http://www.ni.com/white-paper/4713/en

  Kind regards

  Bryan

  Bryan,

  I don't understand what you're saying, so let me rephrase my answer and see that if this may help you - IF your device properly implements the USB standard and has a serial number, VISA uses this serial number.  If your device does not implement the USB standard correctly or if it does not have a serial number, VISA will do for you.

  If your device has a serial number, the VISA can be used to communicate with it.  There are routines that detect and identify VISA devices connected to your PC.

  JasonP

• Laptop HP Pavilion dv6 - 3016 s: USB (device not recognized) problems

  Hello

  on my laptop (Pavilion dv6-3016sl, bought in 2010) for a few months the USB connections give many problems with different devices.

  The first issue with the key external communication 3G (ONDA TM201) Internet: the USB key (which has worked for many months) is not recognized. I tried to reinstall the software and drivers (get the latest version from the website of the producer), but it is always unclear correctly.

  The visible in USB Device Manager error message is "cannot start (code 10) machine.

  Recently other USB devices have ceased to be recognized: powered USB Hub (HAMA USB 2.0 Hub 1:4, bus) and the Wired Optical mouse (Logitech).

  It is also not possible to install new USB devices (for example, a device of wireless sync to a cuff of training).

  I've done many controls of Microsoft on the integrity of the system, and I frequently run the Windows Update to be aligned to the latest version of the fix.

  You have any suggestions to analyze/fix this locking problem?

  Thanks in advance,

  Moreno

  I know this may seem a rather harsh to suggest method, but at this point, I suggest backup of important things on your laptop computer to online storage. This is because you can use the USB storage for the moment.

  Once you have done this, it's time to locate your drives support usb recovery and licenses of all other programs that you have installed or recovery.

  Start on the recovery media.

  Use the HP Recovery Manager to perform a factory image recovery which will reinstall the operating system.

  Since you say that the usb ports work under Linux, then reinstalling the operating system Windows needs to solve the problem of usb port that you are experiencing.

• Unrecognized USB device... need help with the SFC results!

  I followed several channels of the problems that were associated with the popup error in Vista that says "Unrecognized USB device"... that I'm having the same problem.

  I tried to uninstall and reinstall my USB drivers with nothing working.  It was recommended that SFC.exe in the message area of C:.  I did and it came up with error messages that could not be repaired in the CFS program.  What should I do to fix these problems?  I posted the report itself below, showing that areas that have problems.

  Any help would be appreciated!

  ] Beginning Verify and Repair transaction
  2010-02-15 16:28:48, info CSI 00000124 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:28:50, info CSI 00000126 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:28:50, info CSI 00000127 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 16:28:50, CSI Info 0000012a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2010-02-15 16:28:51, CSI Info 0000012 c [SR] verification complete

  ] Beginning Verify and Repair transaction

  2010-02-15 16:32:13, Info CSI 00000199 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:32:13, CSI Info 0000019b [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 16:32:13, CSI Info 0000019 c [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 16:32:13, Info CSI 0000019f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2010-02-15 16:32:13, 000001 has 1 CSI Info [SR] full repair

  2010-02-15 16:32:13, 000001 has 2 CSI Info [SR] validation transaction

  2010-02-15 16:32:13, 000001 6 CSI Info [SR] a check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  2010-02-15 18:31:23, info CSI 00000006 [SR] components check 100 (0 x 00000064)

  ] Beginning Verify and Repair transaction

  2010-02-15 18:35:11, info CSI 00000124 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:35:12, Info CSI 00000126 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:35:12, Info CSI 00000127 [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 18:35:12, CSI Info 0000012a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted

  2010-02-15 18:35:13, CSI Info 0000012 c [SR] verification complete

  ] Beginning Verify and Repair transaction

  2010-02-15 18:37:58, info CSI 00000199 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:37:58, CSI Info 0000019b [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2010-02-15 18:37:58, CSI Info 0000019 c [SR] this element is referenced by [l:160 {80}] "' Package_30_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000.936330 - 187_neutral_GDR" "

  2010-02-15 18:37:58, Info CSI 0000019f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2010-02-15 18:37:58, 000001 has 1 CSI Info [SR] full repair

  Hi CapsFanQ,

  To repair the system corrupted files on the computer that was not fixed by SFC scan, an upgrade in place might have to accomplish.

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/default.aspx/KB/968279

  (See option 1 in the link)

  Note:  Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. Make sure that you back up personal data to disks or other storage devices before performing an upgrade on the spot. To perform an upgrade in-place, follow these steps.

  Until you try to upgrade on the spot, I suggest you follow the steps mentioned below to fix USB:

  Step 1: Run the fixit provided in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  If the problem persists,

  Step 2: Connect the device to a different USB port and test and also to connect the device to another computer to eliminate the problem of USB device.

   

  If the problem persists,

  Step 3: Reinstall the USB controllers.
  

  First of all, please disconnect all USB devices and then perform the following steps:

  1. click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  2. in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  3. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  You can contact the manufacturer of the USB device for known problems

  Step 4: Update the driver of the motherboard (Chip set drivers) to the latest version.

  Note: Please check with the manufacturer of the motherboard before installing the driver.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.