Suggestion of PCI - CAN required...
Hello
I've narrowed my search for card PCI PCI - CAN - 7841 Adlink technology... Its got dual CAN network... what exactly does that mean? ... and this card PCI - CAN support Labview? Y at - it vendors of PCI - CAN with Labview support low cost...
Thank you best regards &,.
Harish Chincholi
Hello, Mr. Harish
Hope your problem is resolved. Let us know if you have any other questions.
Tags: NI Products
Similar Questions
-
Get the msg after using a card PCI - CAN HS 2.
WARNING ncReadMult: unknown status (3ff6206b)
Trying to find exactly where and why this msg is generated.
I tested the card; It is ok. Runing for months before with no problems.
I seem to be able to read directly, without any problem, the application of M & A (OR).
Cables look good, but are there to waterproof connections, so no absolute.
I accept all the ideas at this point. Help if you can.
Dave
HUBD,
Have you seen these very similar forums. They both offer some very good suggestions. While it's always a warning, this means you have lost a framework, when it becomes an error, you may have a connection problem.
-
When I open a new tab, I would like to open in my homepage (my favorite search engine). Any suggestions how I can put in place, please?
It looks like you want the extension new tab tribute.
https://addons.Mozilla.org/en-us/Firefox/addon/777/For more information about extensions, see using extensions to add functionality to Firefox
-
MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?
Here are some links from Apple which may help
How to choose a boot on your Mac - Apple Support drive
On the screens, you see when you start your Mac - Apple Support
-
I have ios 9.2.1 on my iphone more than 6 s and my region is USA. The application of new appears in my Siri suggestions and I can use it from there, but it is not anywhere else on my phone. I'm afraid if she suggestions I won't be able to use it. Everyone knows about this problem?
The News app is on your device. You should check to see where it is. It might be in a folder. Browse your folders to search for, you can do a search is sliding to the right of the homepage, or you can drag down from the center of the homepage to bring up the search. From there, you can do a search of the application, and if you have it in a folder, then the name of this folder will appear to the right of the app.
-
What wireless network card Mini-PCI can I install on Satellite 1410 604
Hello
What types of cards Mini-PCI can I install in this laptop?
There is information in the user manual, this Satellite 1410 minipci location is compatible with Type III A.Will this card http://www.gigabyte.com.tw/Support/Communication/FAQ_Model.aspx?ClassValue=Communication&ProductID= 985 & ProductName = GN-WI01GS work to insert it?
I have goggled a bit and found a XG - 601 802. 11 b / g Mini-PCI WiFi 54 Mbps card.
According to the description of this map is a Type III interface supported A 32-bit.
The Intel PRO/Wireless LAN 2100 3 card Mini PCI also supports an IIIA interface.
These are one of the first Wlan miniPCI cards that have been designed for the use of Wlan and support several protocols of Wlan -
The second image lost in CAN communication when use card NI PCI-CAN/XS2
I recently had a problem on CAN communication.
I need commmunicate a Cluster with CAN BUS, baud rate is 500 Kbps, the BOX is card NI PCI-CAN/XS2. The operating system is Windows XP.
normally, the PC send a Cluster command, then reread a frame of data of the Cluster, but for some controls, the Cluster will return two data frames, and the program on PC cannot receive the second frame, he lost.
I searched the forum, most of her results is the overflow of CAN BUS error, which make the CAN setting lost, but there is not an error on my program report and baud rate is not that fast, I also use another port of the NI PCI-CAN/XS2 to monitor the bus CAN, the second frame of data never appear When I can replace NI CAN map vector CanCaseXL (CAN card) and call of CanCaseXL DLLS in labVIEW, it can get the second CAN fit, the vector CanCaseXL monitor can get the second image data also.
Yes, is there a software/hardware configuration must be done to get the second block of data?
the attached photos are NOR-CAN/vector ALLOWS to follow and CAN init/write & read in my program.
Any reply is appreciate! Thank you
Hello iwantofly014,
I don't know that the framework is not lost.
Could you post your code? In particular the data Get VI?
Also, can you make an indicator of the output of the ncReadNetMult?
It seems you are trying to implement the UDS and KWP2000 Protocol. Is this possible? We have a product that already implements these two protocols and really simplify this type of application. Its called the Automotive Diagnostic command set.
Have a great day.
-
Looking for pinout - PCI - CAN 18472E-02 d - SUB 9-pin
Hello
I have a 2003 PCI - CAN card that I can't seem to find much information on:
NOR CAN series 1 card. Connector D - Sub 9 pins - Part Number is: 184726E-02
Someone at - it a pinout or know if this follows the normal output of 9-pin NI CAN? Nothing in MAX and nothing Google or OR from what I've been able to find.
Thank you!
Hi Waterppk,
The pinout of the connector 9-pin D - Sub CAN is basically the same for PXI, PCI, PCMCIA, 1/2, series, USB AND interfaces (Center of differences around the use of the PIN 9: "V +").
You can find the latest version of the manual here: NI-CAN hardware and software manual and specifications
Chapter 4, "Connectors and cables" describes the pinout in detail (see page 4-2).
-B2k
-
I installed driver ux 16 in my widows 7 and connected to my pc but nothing displays, no .so tracks what is wrong with it please suggest.or how can I do this by using midi for the first time.
In the subject line, type a brief description of your problem or your question. A subject line that says only "Hi alll" not will receive the attention of someone who can be familiar with your particular situation.
Contact the support of Yamaha.
-
All of a sudden I started getting a "Cannot complete the command because of a problem." message using the Adobe color engine Can anyone suggest what it can be and how to fix it? Thank you very much!
Trash this stage and re - register. It could be that new file dialog tries to assign a document profile that is damaged or is no longer present on your system. If this does not work, reset the Photoshop preferences. Press ctrl + alt + shift at the launch, confirm with the dialog box that appears if you did it correctly.
Make sure to save all your other actions, brushes and so on first!
Shares usually work between different versions, but if certain parameters have changed they may fail right there.
-
IPMI and lack of drivers PCI, can not download them. Gateway FX530XV
I have a Gateway FX530XV computer and recently upgraded to Windows 7. Now, I get a "missing driver Interface IPMI" and a PCI Serial Port Driver missing"error. Action Center directs me to download Intel Active Management Technology"pilot. Try to do this, but the download is a file exe.part that nothing does recognize it. When I try to rename the .exe file and run it, it comes back as corrupt. Tried to do a search online and there are a bunch of users Gateway FX530XV making updates Windows 7 with the same problem and no solution. Help!
Hello MoldBuster,
Have you used any program of Download Manager to download this file?
It seems that the file has not been fully downloaded, as indicated by the file extension .part to the partial transfer. Try to download again normally and check.
Also, you can download drivers for your Intelligent Platform Management Interface (IPMI) and PCI (Peripheral Component) directly from Intel interconnection. Please visit the link below that auto detects and installs the required drivers for your machine.
http://www.Intel.com/support/detect.htm
Also download the latest drivers from the chipset of the driver downloads section in the link below,
http://support.gateway.com/s/PC/FX530_Series/1009295/1009295nv.shtml
If the download fails, search for the error message in the event viewer and also contact the manufacturer of the system for further assistance.
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
I hope this information helps you!
Arona - Microsoft technical support engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Satellite P10-304 - the card WiFi mini pci can add?
Hello
I have a Satellite P10-304.
I would like to add a mini PCI Wireless.
Can someone tell me one would suit this machine.Thank you
Do you see black and white antennas near the Mini PCI Slot?
If this isn't the case, then you can not install a Wifi card. He won't get any reception. You get a USB Wifi instead.
If you have the antenna, Intel 802.11bg card (2200BG) should work. http://www.Intel.com/support/wireless/WLAN/pro2200bg/
Its a good idea to buy the card from Toshiba (via an ASP) since the Wifi card can be modified to work correctly in the P10.
If you buy a generic MiniPCI Wifi card, he can switch Wifi does not work properly. -
I recently did a reinstall of XP sp2 on this pc and I can't seem to update to sp3. I tried the suggestion of microsoft but that did not help... I seem to assignments and read but who can't seem to upgrade... Does anyone have a suggestion?
Hello!
What are the proposals that did not work?Have you tried to download it and install it manually?have you tried these steps below?1 rename the catroot2 folder.2. rename the folder C:\Windows\SoftwareDistributionIt should work in this kind of situation.1 steps on how to rename the folder c:\windows\system32\catroot 2:go to start > run > CMDtype entry on every command linenet stop cryptsvc
Ren %systemroot%\System32\Catroot2 oldcatroot2
net start cryptsvc
outputMS KB article2. the procedure to rename c:\Windows\SoftwareDistribution folder:go to start > run > CMDtype entry on every command lineNet stop wuauservCD %SystemRoot%\System32Ren C:\Windows\SoftwareDistribution SoftwareDistribution.oldNet start wuauservoutputDownload and save to your desktop the SP3 from this link:Then go to your desktop, double click and run it.then InstallRestart your PC after then go to Windows Update and install all updates.Hope this helps,Please come back if you need assistanceThank youMakoi -
Hi all
I hope there, can someone help me with a Lightroom/Photoshop small but annoying issue. (I saw a similar post on the subject here, but it was for an earlier version of Photoshop Camera Raw and the answers did not help me).
Whenever I choose to edit in > Photoshop in Lightroom to edit a file I get the message error "this version of Lightroom may require plug-ins verson Raw Photoshop Camera 9.3 for full compatibility. Now, I know that I can get Lightroom to make the file or hit continue and that he either will get the job done. But I want to the difficulty of what is the cause. I'm on a Mac OSX Yosemite 10.10.5, I have Lightroom 6.3 (known as camera Raw 9.3 in the section about Lightroom) and I use Photoshop CS6 13.0.6 x 64. I tried to click on help > update in Lightroom and Photoshop, but this has not solved the problem. I tried following the instructions on the Adobe Web site to manually update the Camera Raw plugin that is supposed to be located at (from memory) (root folder) library > Application Support > Adobe > Plugins, but I don't have a Plugins folder (and yes I'm looking in the library under the root folder (, not under my user name).
Advice!
Camera Raw 9.1.1 is the LATEST version which is compatible with Photoshop CS6. You will not be able to update to 9.3. In addition, Lightroom now up to version 6.6. See the note in this article
-
I'm currently serving "last visit" from a site I canceled see URL' if all the site in the list, but when I'll start again on the site and password comes an old password always appears. How can I get out without starting all over?
Thank you. How simple. I forgot I was doing just as well as the last pass
Maybe you are looking for
-
I moved it down to view more emails and now I can't bring him back. I restarted Mail and also my computer come and go between the classic layout and the other, but no track use. I get the arrow in half, but it does not work. I wonder if this is a bug
-
is there an adobe for the xbox?
-
How to follow the port on my router ipstar
How to follow the port on my router ipstar
-
I forgot my password and I can't get into my computer.
I use xp
-
I bought a laptop from someone & when I turned it on it was locked & I do not know the password. As soon as I turn it on it says "power on password or administrator password. When I type a password after 3 tries & is incorrect, it says 'Disabled syst