Suggestions of light Studio

Creating a small studio in my garage but I'm new to the flash photography, but I'd like to hear opinions out there for lighting options.  I looked at Adorama TV and watched a lot of videos very good they have on the studio lighting, but I'd like to hear from you guys in the field as well.

I will use my new Canon 5 d mark 3 and my new lenses 24/105 4.0 and the 70/200 2.8 11

At least you are well equipped so far. I have all three of these elements myself, and I predict you are goinna like them a lot.

Glad to hear this kinda dived with gear recommended and non-surprises without regrets.  As my cousin always said "If you're going to be a bear might as well be a Grizzly" I had to laugh at that one, but coming from someone who doesn't have a budget.

Tags: Canon Camera

Similar Questions

  • Suggestion of lighting

    I have little place in a small budget for new photographic equipment at work. I currently have some lighting as follows:

    1 small light tent box and white gaffers tape

    2 vertical supports

    2 balls with what looks like a standard lighting outlet

    2 fluorescent bulbs type screw

    SB800 Flash on top of a Nikon D80

    Looking to add a few extra bulbs for existing scoops and the new lighting components. I have about $200 - $250 to spend. I'm mostly shooting small "gifts". Vases, bowls, boxes-gifts, occasional small foods (fruits, small candy). Any suggestions or recommendations for bulbs, housings, or fixtures, etc. is greatly appreciated. Thank you very much

    Only do make the mistake that I made. Bought some mono lights and found a day later that they operate on 220 volts. My fingers are crossed that they take care of it before it is shipped.

  • For Hiroto (new)

    Hiroto, thanks a lot for your new CSS. There are a few things that I would try to change. First of all, for the thread list (for which I've used a more dark blue for content in fat-read), I find the text a bit too heavy and I wonder if you can suggest slightly lighter version of this and of course, where to go.

    In addition, at least on my Mac, the response window goes too far out near the right edge of the screen, making reading sometimes a bit difficult. Perhaps you could offer a way to have a window a little narrower, more compact answers?

    Update: figured out the first question. Line 400 game-go-details game-td-title hard {make-weight: 600! important ;}}

    Changed the thickness of 400 police.

    In addition, as a record, to remove certain annoyances, I added the following to about line 40, go"Tweaks" of tt2

    . plus-reponses {display: none! important ;}} / * Hide more to the conversation block * /.
    . All-answers-container {display: inherit! important ;}} / * Show all responses * /.
  • Speakers do not work, but the headphones are

    Hello

    Just until yesterday, the speakers were working well, but today I try listening to something but no sound coming from the speaker.

    I plugged my headphones and it seems to work very well. But when I unplug my headphones no sound. Can someone help me?

    Thank you

    Hello Ninito,

    Because you heard tones during the display of the color bars in the embedded PSA Diagnostics, this means that the speakers work.

    Because you can hear the audio through the headphones this means that the audio hardware and driver are working.

    If you reinstall the audio driver * but still can not hear the speakers, this means that in the headphone detection circuit does not. When the detection circuit fails, Windows "believes" that a plug into the Jack and therefore will not allow audio to switch the speakers.

    The solution is to replace the plug, but your model is taking part of the motherboard. To replace decision means replace the motherboard which is too expensive for most people. Your idea of using an external speaker system is probably your best workaround.

    As you may know, Dell does not support Windows 8 on the model of the Studio 1558. I guess that the audio driver you are using is now the native audio driver that is built into Windows 8. You can also try the IDT audio driver (IDT is the manufacturer of audio equipment on a Studio 1558). This link will lead you to a page of drivers suggested for a Studio 1558 with Windows 8. If you want to try the driver IDT, go to this page and click the link under the word "Audio".

    If you are able to install an IDT audio driver in your Studio 1558 with Windows 8, there is a solution that could allow audio to come through the speakers. This workaround is in V of article 2 of the Jack FAQ of headphones.

  • File/folder naming error rejected by writing to DVD

    Everytime I try and backup files/folders to DVD I get this error of naming

    What is the error of naming, so I can avoid it in the future because these files are invaluable for me

    I would also like to know why Windows allows to memorandum of assignment of file names which is not acceptable for DVD writing

    Hi Chris,

    This problem occurs because of a problem in how Windows manages long-path errors.

    I suggest you to download and install the patch available from the article:

    http://support.Microsoft.com/kb/2891362/en-us

    For reference:

    Follow the suggestions of DM Studio posted on 19 November 2010:

    http://social.technet.Microsoft.com/forums/Windows/en-us/53779044-D453-458b-B8C4-96d41711ea69/file-name-too-long-cannot-copy?Forum=w7itprogeneral

    Please let us know the results.

  • Dell Studio 540MT does not start, green power light on, but the Start button / clear stop completely

    Looking for assistance

    Have a Dell Studio 540MT (purchased in 2009), worked great until 2 weeks ago.   After a temporary system failure would not start.    The power light itself is green fixed.   The power button on the front panel is completely released.

    I read a lot of messages and other information about a similar problem.   Therefore, I did following:

    1. unplug everything, press the power button / stop for 1 minute and retries.   without success

    2. replace the CMOS battery.  without success

    3A jumps the Green and black 20 supply connection wire pins to motherboard.  It started immediately food, fans and hard drive.   so I assumed that the PSU has been authorized.

    4 replace the motherboard with a new mobo.  Curiously, in a first time, there was no change, but after about 2 minutes, the power button was working and power system.   Everything worked so very well.   I had also completely cleaned all the dust in the chassis and radiator, fan and had applied the thermal paster as directed by Artic Silver.   I even turned off after hours of race and restarted system.  Restarted, he noted that it took a couple times by pressing the power button to make it work.   Then the 2nd day I shut down the system by a normal shutdown through Win 7 and let rest for about 10 hours.   When tried to start/turning the power on again, same problem as the original problem... at first, before light power button would show amber flashing when first pressed the power button / stop, then once I unplugged the power cord and let it sit for 1 hour, the light power button showed no light, completely and again no restarts.

    5. I ordered a new power button cord (new)... This could be the problem and replacement will fix?   Is this a known problem that power button can cause this kind of problem?

    6 or is a problem of power supply?   But you wonder why the green light of the PSU and works very well when jumping the Green and black wire on the connector 20 pin?     Before I go buy a new power supply to other suggestions?

    Is there a known issue with button / stop itself and/or PSU on Dell Studio 540 MTs?

    Yes, the front panel can cause failure to start in some models, although I don't specifically remember if the 540 has been affected by this problem. Please let me know if the replacement resolves the problem.

    ATX power supplies should work. Here are the standard components of the Dell desktop computers.

  • Dell Studio XPS 435mt does not - light light orange card mother

    I had my Studio XPS 435mt for recent years and love it! Normally I leave my machine on almost every day all day so I can access it remotely. Well, today my power went out (the product is connected to a good surge protector) and now it won't turn back on.

    When I plug it in there is a green light to the rear of the machine and internally, there is a orange light, which lights up. When I press the power button nothing happens, not even try to power on. I read a few forums that suggest all of a new power supply, a new motherboard and even a job to 'put your motherboard in the oven' random.

    So my question is can I do anything to check what the problem is? Also, if it of a motherboard problem and needs to be replaced, where is the best place to get a motherboard? Reference Dell sells to them directly or I have to go to a 3rd party to track down?

    Thank you in advance for your help!

    A type of power surge Strip does nothing to protect the PC during a power failure.  You need a 'UPS' unit to protect the PC during short power outages (most).

    As he ran, anything could have happened to the power supply to the motherboard to a component on the motherboard.

    As you have the power to 'keep' alive on the card mother, indicated by orange LED, power supply works somewhat.  Unplug the power connector 24 pins on the motherboard.  Then the rider GREEN wire to a BLACK wire and see if the power turns on (fan running).  If it does, it does not say the PSU is good (only replace it with a known good power is the only true test for a power supply), but it does not say the rotation of the problem is not in the power.  If it does not start, food is the likely problem.

    If the power supply lights the other most likely problem is the motherboard.  Reinstall (unplug and plug back in) the prior panel connector on the motherboard and then give it a try. If it still does not respond, the motherboard is suspect.  The power switch, itself, would be a very remote problem.

    Dell is a source for a replacement motherboard.  There are sites that sell Dell used/given to nine motherboards and ends up with a google search.  Only another mother of exact replacement fit and work.

    Finally, regardless of the tests do or anything that seems as it isolates a certain part, unfortunately only to replace the part really tell you if it's bad.  To avoid buying something you don't need you can make to a PC repair center renamed to what is really wrong.

  • My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

    My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

    It was AC off recently?

  • I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

    I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

    You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

  • My light inside the laptop goes dark Sun, suggestions why?

    In the last two days my light in my laptop guard fluttering and from dim to dark, this morning I couldn't see all the screen. This HP laptop was purchased almost four years ago brand new costs nearly 1, ooo don't know could be suggestions? Need help.

    When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq has made thousands of different computers. Without this information, it can be difficult, even impossible to help you solve your problem.

    The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number.

    In general, sceen 'floating', 'gradation' and the screen goes dark, point to lamps backlight and/or inverter of backlight out. These parts may be available for purchase, if you want to try to replace them.

    Please click the White Star of KUDOS to show your appreciation

  • What license should I provides, in India, rely on Microsoft Visual Studio 2010 Professional and Visual Studio Light Switch

    (1) if I want to build and sell, small PRODUCTS (but not services) (as a freelancer) based on Microsoft Visual Studio 2010 and last Visual Studio Light Switch, what license (s) devrais I provides, in India?

    (2) how can I get the license at a low price?

    (3) in the case if I hold a license and build the product, then what are all the license, my client should have? Ex: If I build a medical billing software, make my customer need to have the permit to switch to Visual Studio or Microsoft SQL Server 2008?

    (4) can I use Microsoft SQL Server 2008 Express on the deployment site (my client), or if my client needs to obtain a license for the database, and then which version of SQL Server 2008 build be cheaper?

    Thanks in advance,

    Hill.

    For support with Visual Studio, please click on the link below. Thank you.

    http://social.msdn.Microsoft.com/forums/en-us/categories

  • I have PSE14 and Lightroom 4.  You want to use 'open as layers"in lightroom.  It is not high lighted.  I thought that you can use this function to go to PSE.  Any suggestions?

    I have PSE14 and Lightroom 4.  You want to use 'open as layers"in lightroom.  It is not high lighted.  I thought that you can use this function to go to PSE.  Any suggestions?

    Ask in the forum of elements Photoshop Elements

  • With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions

    With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions?

    Hello

    Please make sure that you work in 8 bits/channel and RGB mode. (Under Image > Mode > Select RGB and 8-bit per channel) lightning effects only works in this mode.

    Also in preferences > Performance > "Use Graphics Processor" must be checked.

    ~ Assani

  • When I open a photo in CS6, the background "stutters" back and forth between the mole default background and a very light background of gray and white checked. This has just begun. Any suggestions?    Thank you RB

    When I open a photo in CS6, the background "stutters" back and forth between the mole default background and a very light background of gray and white checked. This has just begun. Any suggestions?    Thank you RB

    Windows? Update your driver from the website of the manufacturer of the GPU video card.

  • Studio XPS 1640 does not start. No bios, no control of fan. Volume + / illuminate, flashes of silent light...

    I have a Studio XPS 1640 (model PP35L) that will not start. Fires along the sound card light upward from left to right and back (as it should), but then stops. Them increase volume and low lights stay and the mute light flashes.

    The cooling fan is not test, or do anything else. Nothing on the screen or the other.

    I have re-seated ram to check it was OK

    A Google search is supposed to replace the motherboard. I did this and the problem persists.

    Someone at - it tricks, tips or advice please?

    Mike

    Thanks for the reply! The problem was a crooked PIN. Once I straightened the PIN and reused thermal paste the laptop worked perfectly. I don't know if I did it, but I didn't have the old motherboard to see.

    Thank you!

Maybe you are looking for