SUMIFS #REF! error message

Similar Questions

• cartiadge error message display refer to the device documentation totrouble shoot

  HP officejet j3500 series all-in-one sir I Bay an orginel hp 702 cartriadge onl 50-60 copy cartriade error will be now display refer to the device documentation trouble shoot it please thanks replay

  Did you buy printer and then move to another country? If so, the only way to fix is to contact technical support.

  Cartridge error message.

• Ref cursor error message

  Hello expert;

  I have a function that returns a ref cursor, but the function may not return anything. I would like to know what is the best way to manage the error message

  ORA-06503: PL/SQL: function returned no value - slider Ref

  .. Please see below.

  function f_de return latest_cur is
  my_l_cur l_cur;
  
  begin
  open my_l_cur for
  select max(dateadded) as dateadded
  from tbl_test;
  end;
  

  I was wondering what is the best way to manage. I know I could use a count, and if the number is greater than 0, manipulate, but I was looking for the best way to manage it.

  user13328581 wrote:

  Hello expert;

  I have a function that returns a ref cursor, but the function may not return anything. I would like to know what is the best way to manage the error message

  ORA-06503: PL/SQL: function returned no value - slider Ref

  .. Please see below.

  1. latest_cur the f_de function return is
  2. my_l_cur l_cur;
  3. Start
  4. Open the my_l_cur for
  5. Select max (dateadded) as dateadded
  6. of tbl_test;
  7. end;

  I was wondering what is the best way to manage. I know I could use a count, and if the number is greater than 0, manipulate, but I was looking for the best way to manage it.

  by definition a FUNCTION returns a value, but your code isn't working; Therefore, the error is thrown.

  RETURN MY_L_CUR;

  the top line should take place before the END; statement.

• All-in-one HP Photosmart C5280. You get an error message... Refer to the printer documentation

  You get an error message... Refer to the printer documentation

  Can you estimate the level of ink in its entirety for each cartridge, by looking at the gauge of printer ink?  See step 3

  Have you recently had a paper jam?

• Error message: the instruction at oxo5e32570 (or0x05e32570) Ref. 0x0000006c memory could not be written. -What it means and how to fix it?

  Appear when I restart and shut down my computer

  Hi Gary,.

  This error is pretty generic, and can have several causes. However, this is a potential resolution to your question, which is an article that deals specifically with this issue. The link also includes a fix.

  "Error message when you try to shut down Windows Vista:" education to... the memory could not be written "

  http://support.Microsoft.com/kb/937381

  Hope this helps and let us know how it works for you,

  Steve <> Microsoft Partner

• Scam error messages

  Original title: Error Messages

  Yesterday, I received a phone call from someone who said he was with Microsoft.  He said they were receiving messages from my computer which indicated that I had been hacked and wanted access to allow his technical team clean up all errors.  Everyone knows this?

  Hi Wanda,.

  Thanks for posting your query in Microsoft Community.

  According to the description, it seems like it might be a scam. Microsoft never call customers to solve problems with computers. It's only the customer need to call Microsoft.

  I would ask to refer to the article below.

  Avoid scams that use the Microsoft name fraudulently

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Could not start the print spooler service, to get the error message: 1053-service cannot be answered on the local computer.

  Original title: Print printer printing

  I can't get the print spooler to turn on, get error 1053-service cannot be answered on the local computer. I tried password admin and services, but it will not turn on. Any suggestions?

  Hi, DUBOIS,.

  This error occurs when you do not have the latest service pack for Microsoft .NET Framework 1.1.

  Please answer the following questions.

  1. What operating system do you use?
  2. What is the brand and model of your printer?
  3. Did you of recent changes made to your computer?

  While your answer above information, refer to the suggestions for the following link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

  Hope the above information helps.

• Receiver error message: "" Ultra driver would need UM_EMDL. "» "DLL", printer installation.

  Original title: Ultra driver would need UM_EMDL. DLL

  I have a badge printer (ID Pro) and it allows to install the printer whenever I plugged into my computer. Now, I get an error message indicating
  «"Ultra driver would need UM_EMDL."» DLL", I searched all files on my C drive and cannot locate this file.  Don't know why it is missing.

  All the advertised 'free' pilot of fixation and the registry fixing software so far has not proven to be free. Any suggestions?

  Hi LucindaGreene,

  1. What is the exact brand and model of the printer number?

  2 Windows operating system you are using?

  You can try the following steps and check if it helps:

  Method 1:

  Uninstall the printer and reinstall it again.

  Step 1:

  If you use Windows 7, to remove the printer, follow these steps.

  a. open devices and printers, click the Start button, and then click the Start menu, click devices and printers.

  b. right-click on the printer you want to remove, click remove the deviceand then click Yes.

  c. If you cannot delete the printer, right-click again, click Run as administrator, click Remove device, and then click Yes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If you use Windows XP, you can delete the printer from the Device Manager drivers or Add / Remove programs.

  Step 2:

  Follow this link to install the printer.

  Install a printer

  You can also visit the printer manufacturer to download and install the latest version of the printer drivers.

  For Windows Vista, refer to the article:

  Add or remove a printer

  Method 2:

  You can also try running the fix it and check if this may help:

  Printer in Windows problems

• try to install itunes but get a win32 error message and ignore then an Apple Application Support is not found

  When I click on install to itunes, it goes very well until it will try to install it and then I get a weird error that the basis of this message is a win32 error. Then so I ignore this and itunes is able to be installed, but when I click on itunes, I get an Apple Application Support not found message! Eeek help someone!

  Hello

  1. What is the version of Windows installed on your computer? For example, Windows 7, Vista.
  2. have you done any software or hardware changes on your computer before this problem?
  3. What is the full win32 error message you get when installing itunes?
  4 is specific to the program the issue?
  
  Since we don't know the version of Windows installed on your computer, you can read the following general steps.
  
  I suggest you to bring to the version of Windows installed on your computer so that we can better help you.
  
  To work on the issue, refer to these methods.
  
  Method 1:
  
  Run the fixit from the link:
  
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
   
  Method 2:
  
  Refer to the steps from the link.
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926
  NOTE: after you complete the steps suggested in the section (4) Disabling other incompatible software), you must start the computer in normal mode using these steps.
  For the Windows XP computer:
  a. from the Start menu, click run. A run (command prompt) window appears.
  b. type msconfig in the Open field , and then click OK. The utility of Configuration system opens.
  c. click on the tab general.
  d. Select the 'Normal startup' option.
  e. restart the computer.
   
  For Windows 7/Vista:
  a. from the Start menu, click all programs click Accessories.
  b. click run. A run (command prompt) window appears.
  c. type msconfig in the Open field , and then click OK.
  d. If Windows needs your permission to continue, click on continue. The utility of Configuration system opens.
  e. click the general tab.
  f. Select the 'Normal startup' option.
  g. restart the computer.
   
   

  In addition, you can also ask your question in the Apple discussion forums.

  https://discussions.Apple.com/community/iTunes

  Hope the information is useful.

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• PAGE_FAULT_IN_NONPAGED_AREA Stop 0 X 0000050 error message (0XBAD0B148, 0 x 0, 00000002 00000000, 0X805B0BCA)

  Hi people:

  Thanks for any help you may be able to give!  I am a real novice at the request for such assistance, so please, I need your understanding and your patience.  I searched the web, forums and site windows.com.  All I got is, sorry, your search did not reveal an answer.  This problem exists on my wife's cell phone, but only after she used it for awhile and then it allows to sit unused, still for a while.  How long before that happens I can't say, because I usually notice it after that she went to work.  This has happened for the fifth or sixth time now.  If stop us the laptop and then restart it, it works without problem, until it rests still.  I have him, I asked that she installed lately, and she said nothing.  I can usually solve our problems of PC and set "the blue screen of death" before, to find answers on the line, but not this time.

  The OS is completely updated to Windows XP Home Edition that came on laptop Acer 2310, but I'd love to get rid of it and use XP Pro, but...

  I hope someone can it send me a solution for this problem of blue screen.

  Thanks again and have a great day

  Claude

  Hi Claude,.

  You can try these steps and see if it helps.

  Step 1:

  You can read the following article and see if it helps.

  You may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e"

  Step 2:

  You can also try to perform a clean boot and check for the issue.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• Error message: "you don't have permission to save in this location. Contact the administrator for approval. "restore quickbooks file

  Original title: restore quickbooks file

  I'm trying to restore a quickbooks on a new computer file.  I get the message, "you don't have permission to save in this location.  Contact the administrator for approval. "what should I do?

  Hi KimNaegele,

  1. where are the files located?

  You can read the following article and see if help.

  You receive an error message when you try to save a file on a hard disk drive or a flash device in Windows Vista

  Note: This also applies to Windows 7.

  You can also refer to the Quickbooks, bandages and see if it helps:

  Error - 6000,-83: an error occurred when you open or restore your company data file

  The problems of restoring backups

  Hope this information is useful.

• the version of windows is not genuine error message

  I keep getting an error message indicating that I am using a version of windows that is not authentic.  I bought this computer at Dell, already loaded in November 2010 and this message just started to appear in the last two weeks.

  Hello

  ·         What is the complete error message you get?

  ·         What operating system do you use?

  ·         You did any recent hardware changes to your computer?

  Your computer is new I suggest you to contact Dell technical support to resolve this issue.

  http://support.Dell.com/

  You can also refer to:

  Resolve activation problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

• Don't know what updates I need through the center of update. And get the following error message popup every minute, wuauclt.exe.

  Please, I beg you, help me please I need this computer for my work and am already 1 day behind by logging into my company to do my job (I have Windows XP Version 2002 service pack 2)

  Not only can't update windows via the update enter but an error message continues to appear every minute that used to go.

  It says "wuauclt.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  If I click on th does not send or send error report this message keeps popping up. When I click the to see what data link, he said:

  "Error signature szAppName: wuauclt.exe szAppVer: 7.4.7600.226 szModName: szModVer esent.dll: 5.12600.2180 offset: 005d 424 '  Details of the declaration: this error report includes: observation information covers the status of wuauclt.exe when the problem occurred, the operating system version and used hardware and Protocol address Internet (IP) of your computer. etc, etc, etc.

  When I click on info tech I get

  Content error report the following files should be included in this error report: C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\wuauclt.exe.mdmp C:\DOCUME~1\Owner\ LOCALS~1\Temp\WER189a.dir00\appcompat.txt WER189a the number changes each time.

  So far, I ran McAfee, Microsoft Security Essentials and it keeps popping up. I still do not know what updates I need through the Update Center but could manually go and get service pack 3 by itself. I need to be able to use the center of update and do not have this message continues to flow upward.

  What I do?   Thank you so much Corina

  Hello

   

   

  Let us make the below listed methods and check if we still get the error message.

   

  Method 1.

  I would ask you to reset the Windows UPdate components and check if you still get this error message.

  Click the Fix It button in the article below to do it automatically or you can do it manually as wel. For more information, refer to the article below.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

   

   

  Method 2.
  If the error still persists please provide us with the error log:
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

   

  Method 3.

  I would also recommend to install the Windows Update Agent to manage the updates on your computer.

  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104

  
  Please let us know if this helps you resolve the problem or if assistance is needed.

  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message of HALO CE on vista ultimate, unload debugger, game worked fine on xp. ?

  error message on vista ultimate, a DEBUGGER has BEEN DETECTED, UNLOAD THE DEBUGGER AND try AGAIN.

  Hi trtparadise,

  Welcome to the Microsoft Answers community.

  a. which version you are trying to install?

  You can check the compatibility of this game using the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=Halo

  To resolve this problem, use the following methods in the order that they appear.

  Method 1: Rename the Amdfix.sys file

  1. click on start and then click search.

  2. in all or part of the file name box, type amdfix.sys.

  3. click on search now.

  4. in the list of search results, right click on Amdfix.sys, click Rename, and then rename the file as Amdfix.sys.old.

  5 restart your computer.

  If this does not resolve the problem, go to method 2.

  
  Method 2: restart the computer by using a clean boot procedure

  1. click on start, run, type msconfig in the Open box, and then click OK.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the following check boxes:

  o SYSTEM process. INI file

  o Process WIN. INI file

  o load startup items

  4. on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click OK and then click on restart.

  For more information visit: http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  If this does not resolve the problem, go to method 3.

  Method 3: Update sound card drivers

  Steps to update the driver:

  1. click on the Start button.

  2. in the search box type devmgmt.msc, and then press ENTER.

  3. Select the audio device and right click on it

  4. now, select Properties.

  5. in the Properties window, on the driver tab, click Update driver.

  6. After installing the updates, restart the computer.

  You can also contact your audio hardware manufacturer to obtain and install the latest version of the driver for your sound card. For more information about how to contact the manufacturer of the sound card, see the References"" section. Otherwise, refer to the following Microsoft Windows Update Web site to determine whether applicable driver updates are available:

  http://windowsupdate.Microsoft.com

  If this does not resolve the problem, go to method 4.

  Method 4: Disable the creative welcome menu

  1. click on start, point to programs, point to Sound Blaster Audigy and then click on the Home Menu.

  2. Click to select the do not show this box again and then click Close.

  If this does not resolve the problem, go to method 5.

  Method 5: Configure the Audigy in the System Configuration utility

  1. click on start, run, type msconfig, in the Open box, and then click OK.

  2. in the System Configuration Utility window, click the Startup tab.

  3. Click to clear each check box Audigy-associated, and then click OK.

  For more information visit:

  http://support.Microsoft.com/kb/812759

  http://support.Microsoft.com/pchalofaq

  You can also try to install vista or XP compatibility mode.

  For more information, visit the links below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.