Super CD DVD ROM problem in 1000-1140tu laptop...

Similar Questions

• P10: DVD / DVD-ROM problems

  Hi guys!

  Hope you can help, probably something stupid, I forgot. I have the P10 series with a Combo DVD - ROM SD-R2412 type. I recently put a new installation of the op (XP) system by using the system restore disks. Since then, my cd drive reads DVD movies and normal cd but not DVD ROM such a DVD - ROM games. Any ideas? Windows XP sees it as a CD-ROM/DVD-ROM drive, but that's all.

  Thanks in advance for any help

  Hello

  I'm not sure but I think that your device has a DVD - RAM drive. I have the same drive in my Satellite and everything works perfectly. I really don t understand how something like this possible is especially after the reinstallation of the operating system with recovery CD.

  I put t know if you use the original games store or some houses burned. Try to use many different DVD media to know what problem one makes.

• Error code 19 - CD/DVD-ROM problem. Please help and read the description first!

  I tried to load my games such as rollercoaster tycoon on my computer by inserting them into the disc drive. Nothing happens. I went to toautoplay and it had all the right settings I wanted. I changed several times and tried to re - insert the disc, but nothing has happened yet. I thought it was a problem of CD/DVD drive, so I went to 'Computer', right-click on Vista64 (C :) and selected 'properties'.) I clicked on the Hardware tab, and then on HL - DT - ST DVDRAM GS20N, my CD-ROM/DVD-ROM drive. I realized quickly that there was a problem, because the box said"device status: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.» (Code 19) «. I looked at the code 19 on the support Web page and found a link to a Microsoft Fixit, Windows Powershell 1.0. I installed the program, he ran through and he said that he had fixed the problem. I inserted the game once more, but still nothing happens. I went to my CD-ROM/DVD-ROM drive once more and he said that the problem was not resolved. I don't know how to solve this problem. Help, please! (It is not just the CD I try to insert, because none of the many CD I tried to use will work). Should I try to restart my computer?

  Hi meluvcheese22,

  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.

  To resolve this problem, you can follow the methods below:

  Method 1:

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article:How to back up and restore the registry in Windows:http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  a. Click Start and then click all programs.

  b. click Accessories and then click Run.

  c. type regedit and then click OK.

  d. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  e. in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  f. in the right pane, click UpperFilters.

  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step i.

  g. in the Edit menu, click on delete.

  h. When you are prompted to confirm the deletion, click Yes.

  i. in the right pane, click LowerFilters.

  j. in the Edit menu, click on delete.

  k. When you are prompted to confirm the deletion, click Yes.

  Exit Registry Editor.

  Mr., restart the computer.

  You can check the link below: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs:http://support.microsoft.com/kb/982116

  Method 2:

  a. Click Start, type devmgmt.msc and press to enter. The Device Manager window opens

  b. expand DVD/CD player and right click on the sub element and click on uninstall.

  c. restart your computer.

  d. open Device Manager, click Action,

  e. click on scan for hardware changes. Follow the instructions.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

  I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• Satellite A200-23U - DVD - ROM problem after the firmware update

  Hello! I have A200-23U (TSSPcorp CDDVDW TS-L632H). I day first TO02, then TO03 firmare. No error has been shown. After the reboot, my device is locked (is not open / eject button or by any software) and ImgBurn (for example) can't find writers. In system devices now it is shown that:
  IDE\CDROMTSSTCORP_CDDVDW_TS-L632H___*boot*___\5&1AC5D6C0&0&0.0.0 (I think that there must be * TO03 * not * START *)

  What is the problem and how can I solve this problem?

  PS. sorry for my bad English)

  You can try to reflash the drive down to T02 OR you send the machine to an authorized service provider or they fix this problem.

  Could first check if the downgrade works?

  Welcome them

• DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive

  Original title: Dvd rom problem

  Am running windows XP. DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive. Any help out there?

  Hello

  1. When did you start to question?

  2. did you of recent changes on the system?

  3. you receive messages or error codes?

  You can check the following link and try to run the Fixit and check.

  Your CD or DVD drive cannot read or write media

• CD/DVD Rom drive reads the DVD as blank disc?

  Looked for information on the subject the whole place and it feels like I'm the only one who has this problem.

  The CD/DVD-Rom drive in my HP laptop is not reading the data on my DVD or CD I DVD that have been burned on a computer and some other that I burned on this drive. Data on them that I've used them in the past and without any problem. I changed nothing on my computer since the last time I used them I can think of and I have all the latest software updates for Vista and HP.

  Now when I put in drive it takes about a minute and then gets up and tells me that the disc is empty, but I know it's NOT like I've used it before and I see on the underside of the drive it was burned.

  Is this a problem of software or a hardware problem or disk I have not tried a lot of things that just the standard checks to try to get the drive to run but without success. For any help or suggestion would be greatly appreciated.

  Thanks Phil.

  Hello PhilStokes,

  Thank you for using the Microsoft Windows Vista Forums.

  Sorry, you have a problem with this issue.  I would first go to Device Manager to verify that all drivers are up-to-date.

  Go to start-> Type ' Device Manager "" in the search field-> select Device Manager '->, select here (+) for the CD/DVD - rom-> This will fall to the bottom of your device-> next right-click on the device and select update. "

  If not chance or driver is already updated, return to Device Manager and right click on your device and select uninstall.  You may be prompted to restart, anyway go back to Device Manager and right click again and select install or update.

  Please let us know status.  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite P10 problems with Mat * a DVD ROM

  Hello

  I have a problem with my P10,
  I bought it for 2 months and 4 months ago my
  Carpet * a DVD ROM does strange things.
  When I try to copy a CD for example, it reads the cd source, after I put in those recordable, it starts to burn and suddenly it stops, says ERROR (Event Viewer: error on Controller\Dev01\CD-ROM) and my Combo drive is presented as a 'simple' DVD - RAM on Solution Explorer drive.

  Sometimes it won't read movies on DVD or CD so I have
  to restart the P10 and generally it can read the disks after that.
  So is my faulty drive, the card mother or just me?
  Have been looking for a new driver, but there is just a
  DVD-RAM, no driver for the drive itself.

  Hello

  Maybe the contact of the cable to the controller and CD player is loose. The error message said you it should be good!

  Your P10 is under warranty so bring a call Toshiba and it need to be repaired or a Service partner!

  Hans Bye

• My Satellite M40X: DVD Rom has had serious problem

  Dear friends,

  my laptop worked for 3 months without any problem.these days when I put a CD in DVD rom is not recognized and a error message on the screen that says that no cd is in the drive.could would be a software problem or it's definitely a hardware malfunction. I look forward seriously to your instructions

  Amir

  Installed some burning software, burning plugins or something similar? In most cases, these programs are the troublemakers. Try to uninstall all your burning stuff, and maybe it's a good idea that you download a reference (such as ultimate boot cd cd; Link: http://www.ultimatebootcd.com/download.html) or memtest (http://www.memtest86.com/) and try to boot from the cd. When the CD starts correctly, then you know it's something with the configuration of your software.

  Try it :)

  Welcome them

• Driver DVD ROM & DVD + RW drive problems

  For some reason any time my DVD Rom and my DVD + RW readers had a problem. In Device Manager, I get a yellow exclamation and error "damaged or missing. (Code 39) "Apart from these TWO discs. Can anyone help?

  It is a common problem with the Windows operating system. Microsoft has created a tool to solve this problem. You can run the tool of the Internet link following which will identify the problem and solve the problem:
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• Pavilion Elite HPE-170 t: problem with the new HP DH16D5S DVD ROM drive

  My office is a HP Pavilion Elite HPE-170 t.  I recently upgraded from Windows 7 to Windows 10.  I have two HP optical dirives, one is a writer, and the other is just a DVD ROM  Both have always worked perfectly with Windows 7.  After you have installed Windows 10 continuous burner work very well works correctly with autoplay.  However, the DVD - ROM, HP DH16D5S, immediately began using autoplay.  Actually the drive was not yet recognized as a drive when you view the drives in the file Explorer.  Finally, it would seem, sometimes taking also longer than 5 minutes or more before doing so and then would work very well.  I tried different types of media, including music CD, DVD video and DVD software with the same results.  I assumed that it was a problem with the drive, maybe a bad capacitor, etc., which was originally not start correctly.  So I ordered a new DH160D5S, but which seems to have been a waste of time and money, because it does exactly the same thing as the original.  I even changed the cables autour between it and the burner, but it made no difference.  The burner still works fine but not DVD ROM.  I tried to find a more recent driver for it, but had no chance.  I found on a Dell website for this drive which was an update of the firmware for Windows Vista and Windows 7, but not for Windows 10.  I advanced and downloaded, but when I tried to run, I got the message: "your system does not meet the minimum requirements for this update.  Update has been canceled. »

  I want to try a different brand of DVD ROM, but would have to buy one without knowing if it would help.

  Any help will be appreciated.

  Since I posted this message I discovered that there is a driver problem with this DVD ROM.  There's no driver available yet to make the drive compatible with Windows 10.  Since then, I returned the drive and replaced by another brand that is compatible with Windows 10.

• Problems with the software DVD-ROM discs

  My hard drive is not always save when I insert my Sims 3 disc. They are the software DVD-ROM discs. Recently, I was able to install a new but have not been able to get my computer to record the disc since then. How can I solve this problem?

  Hello

  1 are. what software you referring?

  2. what operating system is installed on the computer?

  3. you remember make changes to your computer before this problem?

  Try the steps in the following article: your CD or DVD cannot read or write media http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

• readers of CD/dvd rom registry problems

  Hi I have a similar problem I have a sony vaio vgn-ar730e I ordered up the windows of windows 7 now cd/dvd-rom is recognized but it does not work I put any cd in it that it does not start automatically, and the icon is not located in my computer so there is no way that I can access any cd. Also in the reader of cd/dvd properties it says Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). Please could someone help me with this.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  -----------------------------------------------

  You run the Upgrade Advisor and check the Compatibility Center?

  Windows 7 Upgrade Advisorhttp://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx

  Also check the Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  You will also need to contact Sony for instructions, drivers and/or problems known.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  =========================================================
  =========================================================

  The bottom can help:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD-ROM EXTERNAL PROBLEM.

  WE HAVE THE DELL XPS410 W / WINDOWS XP AND DVD-ROM EXTERNAL DELL DRIVES.

  THE SYSTEM DOES NOT RECOGNIZE THE DRIVE VIRGIN CD - R, DVD-R DVD - RW OR CD - RW

  IN ANY EXTERNAL DRIVES. (D & E).

  ALREADY REGISTERED OR STORE BOUGHT DISCS WORK FINE.

  I GOT A GLANCE AT RECORDS, BUT NOT OF KNOWLEDABLE TO DETECT PROBLEMS.

  THE ERROR MESSAGE IS:

  D:\is not accessible. Incorrect function. Name in the target box is not valid.

  E:\ is not accessible. Incorrect function. Name in the target box is not valid.

  I ran a check for Trend Micro. No problems.

  THANKS IN ADVANCE.

  GERRY

  osprey4,

  Well, I don't know what to say, but after him turning off the computer for a while, work records.

  Then click on the desktop icon, I offer a choice as to which drive I will use as a recorder.

  Another trivia question, how can I change my milroy login ID, Merlin?

  Thanks again,

  Gerry