Similar Questions

• I use xport 360 and I can't put my save game back on the program profile it shows a circle with a cross please help me

  I use xport 360 and I can't put my save game back on the program profile it shows a circle with a cross please help me

  Hello

  If you try to recover the gamer tag, then I suggest you follow the steps from the link below: http://support.xbox.com/en-us/pages/xbox-live/how-to/xbox-live-account-management/gamer-profile.aspx

  If this does not work then I recommend you to ask your question here: http://forums.xbox.com/xbox_forums/xbox_support/default.aspx

  Hope this information is useful.

• master password bios for hp mini 1151 with code 2MC92472WZ please help. THX

  master password bios for hp mini 1151 with code 2MC92472WZ please help. THX

  Hello

  Try to enter: 74eo7vx7d0

  Kind regards

  DP - K

• weird problem with new screen, please help

  Hello people,

  I hope someone can help. I am using windows 7 Home premium and I hope it is a simple solution that someone has met before. It's just that I don't know how to describe it so can't type into google to find an answer.

  This happens in all programs, Firefox, ms word Opera, basically any window I opened. The bar menu at the top of the screen is a transparent white color and everything works well, but after 50 or 60 seconds, it turns into a transparent, I can still read the Word editing, display etc. file. This is where the scroll wheel on the mouse and what I'm typing stops working. When I type something with the mounted volume, all I hear is a single beep whenever I tap on a button, but nothing is actually typed. Now, all I have to do is click anywhere in the window and it works again, but only for 50-60 seconds. I had to click on the screen twice since I started typing this because when I look at the screen, everything I typed is not there because the menu bar's transparent again while I was typing. Its driving me crazy.

  I don't remember what is a problem before, if it was I would have surely noticed. The only thing that has changed is I had been using my 32 LCD TV as a screen for a long time, but I moved and did not bring my TV with me, so I use the PC came with the computer screen. It's a PC I bought my sister a few years ago so I never used the PC screen that comes with it so don't know if it happened when she or what, she has, she can remember either. I have a updated driver, did not work. Changes the settings in customize and cannot do it helped either.

  Monitor: monitor LCD Compaq CQ1859

  Do I something pressed or clicked on something by accident?

  Is there a setting some part that I forgot?

  I plan to cast the spell by the window, its really annoying.

  Please help guys and ladies.

  Hello salamander.

  Please contact Microsoft Community.

  I can understand the inconvenience caused, be assured that we are here to help with your concern.

  1. What is the model of the computer and do ?
  2. Do you see an error message when the menu bar is transparent?

  Please follow the link below and include a screenshot in your post,

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  I suggest you follow the methods below to see if it helps.

  Method 1:

  Clean boot: to help troubleshoot error messages and other issues, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.  Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Important: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Note: If the problem persists, continue with method 2

  Method 2:

  Check the problem by disabling the Aero transparency feature. Please follow the steps below to disable the Aero transparency feature.

  1. Right-click on a vacuum of space on the desktop and click on personalize.
  2. Click on the link to the color of the window at the bottom of the window.
  3. Uncheck the check box enable transparency to disable transparency and check the issue.

  For more information, aero feature please refer to the link below.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Aero-desktop-experience

  Note: If the problem persists, continue with method 3

  Method 3:

  A Malware - scanner The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Please follow the steps below to use the scan to Microsoft Security.

  • Run the scanner from Microsoft from the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  • Click on download now and click Run.
  • Choose complete system scan and wait for the full analysis.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Card problems or video driver with a N200, please help!

  I have a lenovo 3000 N200, that's really cool, works even at games very well, including the most recent.

  But, is it normal that the pilot program display for freeze-out in Warcraft 3? He always does that when you access the list of cards in the game and after 3-5 minutes during a real game. It defines the resolution up to 640 X 480 (from 1280 X 800) and in 16 colors. I have to reset it to get it to work. Also, it does the same thing in Spore - if after seeing the pilot written for Spore installed, (that I downloaded from the lenovo site) I have not encountered this problem far. In addition, Second Life stops - Fortunately it does not freeze the drivers. I understand that the model I have is not designed for the game, but if it can run Warhammer 40 k: Soulstorm with graphics settings meduim (on the widescreen) without a lagg I do not understand why it would not be able to manage warcraft 3 - even a m200 express ATi can manage. I mean that a X 3100 to Intel must be much more powerful. (ATi said card lagg with older games like Unreal Tournament)

  I have the latest version of the - official - driver and a Win Xp pro Sp2. I always keep my system updated - register for Essilor, but until this driver has not need sp3 - and cleaned viruses.

  Please help me?

  Ooh, it seems that I was right, my problems stems from the incompatibility of the software.

  Namely the based opengl driver (this igfx something of the file that is in the rror reports I receive).

  I solved the problem with Warcraft 3, you have to click with the right button on the icon of warcraft 3 and type the destination line (just after the second "")-opengl or - swtnl. (or - d3d, nota bene, who has not worked for me)

  Although even now it's not as pretty as on my table top pc, it works fine and farily good graphics.

  I think your problem is similar to mine and is amplified - sort of - by Vista somehow, it seems to cause a more severe software incompatibility.

• Slaughter of BG sound with another class please help!

  Hey hope someone can shine a light on this for me, been stuggling with that for awhile now.

  I had a background sound to play, which is in a separate category codes:

  Class: screen_Control

  public function randonizer_SND (): void

  {

  var r: int = Math.floor (Math.random () * 17);

  if (r == 1)

  {

  currentBG_SND = snd1_BG;

  }

  if (r == 2)

  {

  currentBG_SND = snd2_BG;

  }

  if (r == 3)

  {

  currentBG_SND = snd3_BG;

  }

  if (r == 4)

  {

  currentBG_SND = snd4_BG;

  }

  if (r == 5)

  {

  currentBG_SND = snd5_BG;

  }

  if (r == 6)

  {

  currentBG_SND = snd6_BG;

  }

  if (r == 7)

  {

  currentBG_SND = snd7_BG;

  }

  if (r == 8)

  {

  currentBG_SND = snd8_BG;

  }

  if (r == 9)

  {

  currentBG_SND = snd9_BG;

  }

  if (r == 10)

  {

  currentBG_SND = snd10_BG;

  }

  if (r == 11)

  {

  currentBG_SND = snd11_BG;

  }

  if (r == 12)

  {

  currentBG_SND = snd12_BG;

  }

  if (r == 13)

  {

  currentBG_SND = snd13_BG;

  }

  if (r == 14)

  {

  currentBG_SND = snd14_BG;

  }

  if (r == 15)

  {

  currentBG_SND = snd15_BG;

  }

  if (r == 16)

  {

  currentBG_SND = snd16_BG;

  }

  playSND();

  }

  public function playSND (): void

  {

  snd_BG_Channel = currentBG_SND.play (0,1);

  snd_BG_Transform.volume = 1;

  snd_BG_Channel.soundTransform = snd_BG_Transform;

  snd_BG_Channel.addEventListener (Event.SOUND_COMPLETE, nextSnd);

  }

  nextSnd(event:Event):void of the public service

  {

  randonizer_SND();

  }

  Is what I try to achieve this sound to stop playing when a "button" is linked and then start playing again back in the main screen.

  The "button" is controlled in a different category, and when I try to put a stop function there is to the sound I have the following error:

  1119: access of property may be undefined snd_BG_Channel through a reference with static type class.

  This is the code I use to try to stop the channel:

  screen_Control.snd_BG_Channel.stop ();

  If you have an idea of what I'm doing wrong please help!

  THX pavel

  Did you check this line? public var snd_BG_Channel:SoundChannel;

  Must be:

  public static var snd_BG_Channel:SoundChannel;

• Problem with clips nested, please help!

  Help, please!
  
  I have a movieclip symbol, let's say, a ball that bounces with a stop(); action on frame 14.
  
  And I have another movieclip symbol which has a text that cross the screen with a stop(); action on the frame of 10.
  
  The main time line, I would like to that ball to start bouncing on frame 2 and stop frame 15, so I placed it on its own layer with a keyframe on frame 2.
  
  I want, the symbol of the text to start on frame 6 and stop on frame 15 also, so I placed it on its own layer with a keyframe on frame 6.
  
  It does not work.
  
  When I play it back, the Visual jump wildly back and forth between the symbols.
  
  What should I do?
  
  I work in Adobe Flash CS3. ActionScript 3.0, 30 frames per second, Player 9 (not sure if this is relevant, but just in case).
  
  Please help me, I'm desperate, I can't understand it.
  
  Thank you!

  Hello

  I'm so clear with what you're saying...

  You have a movieclip that has its own animation of scenario of a bouncing ball and it stop on chassis 14? Even with text movieclip - he has his own animation of script for simple horizontal interpolation that ends on the frame of 10?
  And you placed these clips on the stage, put them on their own layers and moved the mc of ball to frame 2 and the text in the box 6 mc?

  Are there blank keyframes before the frame 2 on image 6 of the text layer and layer of ball? If not, then select frame 1 layer on the ball and press F7 to make an empty keyframe. Do the same on the text layer but select images 1-5 and click F7 to make them blank keyframes.
  What you don't want to do, is show the movieclip before the beginning of their animation. Therefore, you get the wild flashing.

  Also extended these layers to frame of 15 images? Otherwise, click on frame 15 (for the two layers) and press F5 to add frames.

  And you order stop() on plot of 15? Otherwise, create a new layer, call it actions and put a stop() on frame 15 command.

  Sure that your movie will play correctly now.

  NOTE: Just out of curiosity - why don't simply animate you everything on the main timeline?

• Error Code 43 with Nvidea GTX650, please help

  Hello, I currently just bought a Nvidea GTX650 graphics card, I installed all the drivers according to the instructions to however I am unable to access all the games. I explored this further and entered my Manager device and found that my Nvidea GTX650 has an error code 43 for him. I tried the uninstall/install/upgrade to update all the drivers but no luck, please help :)), here are my system specs.

  map of mother Foxconn h61mxl-k

  Nvidea EVGA Gtx650 2 GB GPU

  4 gb ddr3 RAM

  650ub ATX powersupply

  Processor Intel Pentium G620 2.60 GHz

  Windows 7 operating system

  any help would be appreciated thanks.

  Hello

  As you have tried all possible steps and still the problem persists, I would say to contact Nvidia support team check what they have to say on this issue.

  You can also view Code 43: Windows has stopped this device because it has reported problems

  It will be useful.

• MuseJSAssert:Error calls the function selection: TypeError: cannot get the "init" reference to undefined property or no, I am a beginner and not able to solve this problem with my website, please help...

  Everytime I open my site I get this error "MuseJSAssert: Errot calling function selection: TypeError: cannot get the"init"reference to undefined property or null" and I was a newbie am not able to solve this problem.

  

  I did take all measures please help.

  Hello

  Can try you it on another browser that the problem does not come up on top of our end.?

  Kind regards

  Akshay

• Hi my book mac like work that slow down of should I please help me 0402771512

  Hi dear Sir / Madam

  I have a Mac Book Pro

  He works to slow down, I don't know what to do to get faster.

  Hi Sam, download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• VPN site to Site with ASA 5520 * please help *.

  I am using two ASA 5520, and try to put up a site to site VPN.  This seems to be pretty simple, but I'm on my third day of train this is up and running. Both 5520's are running the latest 9.1 (5) IOS.

  Please note: I replaced it with [#1-WAN IP] and [#2-WAN IP] for WAN IP of the ASA addresses.

  Thanks in advance for any help you may have.

  -------------------------------------------------------------------------------------------------------------------------------------------------

  ASA 5520 # 1:

  Crypto ikev1 allow outside

  the local object of net network
  10.0.0.0 subnet 255.255.255.0

  net remote object network
  172.20.0.0 subnet 255.255.255.0

  outside_1_cryptomap list of allowed ip object local net net access / remote

  tunnel-group [IP #2-WAN] type ipsec-l2l

  IPSec-attributes tunnel-group [#2-WAN IP]
  pre-shared-key cisco123

  IKEv1 crypto policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  card crypto oustide_map 1 match address outside_1_cryptomap
  card crypto oustide_map 1 set transform-set ESP-3DES-SHA ikev1
  card crypto outside_map 1 set pfs Group1
  map 1 set outside_map crypto peer [#2-WAN IP]
  outside_map interface card crypto outside

  NAT (inside, outside) 1 local static source net net-local destination static remote net net / remote

  -------------------------------------------------------------------------------------------------------------------------------------------------

  ASA 5520 #2:

  Crypto ikev1 allow outside

  the local object of net network
  172.20.0.0 subnet 255.255.255.0

  net remote object network
  10.0.0.0 subnet 255.255.255.0

  outside_1_cryptomap list of allowed ip object local net net access / remote

  tunnel-group [#1-WAN IP] type ipsec-l2l

  IPSec-attributes tunnel-group [#1-WAN IP]
  pre-shared-key cisco123

  IKEv1 crypto policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  card crypto oustide_map 1 match address outside_1_cryptomap
  card crypto oustide_map 1 set transform-set ESP-3DES-SHA ikev1
  card crypto outside_map 1 set pfs Group1
  map 1 set outside_map crypto peer [#1-WAN IP]
  outside_map interface card crypto outside

  NAT (inside, outside) 1 local static source net net-local destination static remote net net / remote

  Try to correct the mistakes in the two configs.

  In some places, you have 'oustide_map' where you need "outside_map".

• for got password of my app store live ID to connect with different id please help me guys

  guys I forgot the password and even the question of security for the live id I gave in the app store. I just created only to install games.  in order to be inactive in the system for a few days, I forgot everything. I just need to log in with my account of ms one another. but he appears to enter the previous password. Help me please to connect with the different account. Windows 8 pro

  concerning

  Tony

  Hello Tony,.

  Thanks for posting your query on Microsoft Community forum.

  According to the description of the problem, it seems that you use a local account to connect to your computer using the Microsoft account to log in to the app Store.

  If you use a local account you must sign every time use app Store. However, if you use Microsoft account to sign in your computer then you will be able to use all the applications with SSO in. Microsoft recommends that you use Microsoft Account to work with Windows applications and store

  You can see the steps below to create the new account from Microsoft.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Need help with a BR - please help!

  Hello
  
  I would ask you please to help me with your ideas on achievening the sub condition. I have some ideas on this operation, but I am not able to set up everything to make it work. Please let me know your thoughts. Will be a great help.
  
  Requirement:
  
  The requirement is that if the user enters a data value for the Member account 'P' on the data form at any level (Top most parent, intermediate parent level 0 or level), it should work in the following way.
  
  (1) to check what level the user has entered a value for 'P '. We have a relationship that V = P * T. So I thought, what if I dynamically calculate the value 'V' each time for each product should I where they changed as if they change the value "P" it would change the value 'V', as both are related. So, basically I compare the stored value of 'V' with the value of 'V' calculated dynamically.
  
  (2) if the value of 'V' has been changed to this level (i.e. If stored V Dyn.) (V) and this condition is met, then all descendants of the current Member should get the same value of P as input by the user for the current Member.
  
  (3) it should work regardless of what parent level they enter and should begin to fill in the values of this level. And if they fall into the 'P' value to level 0 members, he should leave them as it is without substitution and must be used in the consolidation.
  
  That's what I could think of-
  
  Please suggest changes that does not always work according to the requirement.
  
  FIX(..........)
  
  IF (@ISDESC ("LB") AND 'V'-> @PARENT (@CURRMBR (Product)) P-> @PARENT (@CURRMBR (Product)) * T-> @PARENT (@CURRMBR (Product)))
  P > @CURRMBR (Product) = @PARENTVAL (product, P);
  
  In the same way, IFELSE, for another condition
  
  ENDIF
  )
  ENDFIX;
  
  But this does not work for all cases. Lets say that I have 3 levels in my hierarchy for the product and if users enter at level 2, it does not work and replace the input value including the parent value which I do not know why, because in the first place it should not enter the loop just like the custom of condition be met. Reason, the user changed to level 2 and 3 not, so it should do nothing from what I understand.
  
  Please let me know your thoughts.
  Thank you.

  Hello
  Below should work with these assumptions:
  1. you should not be aggregating V and P on products or you should use other members who together ever.
  2. There are three generations (or 4 levels) in the dimension of your product. If you have more levels, you must change the marked spot.
  3 and as you suggest, a new account is used for the comparison. Here it is called M

  FIX (...)

  DATACOPY V and M;
  ENDFIX

  SET CREATENONMISSINGBLK
  FIX (...)
  Fix (@IDESCENDANTS (Product))
  « V « = » P » * « T » ;
  ENDFIX
  Fix (@IDESCENDANTS (Product))
  Budget)
  / * Change below for additional generations * /.
  IF (@ANCESTVAL(Product,3,V)! =@ANCESTVAL(Product,3,M))
  "P"=@ANCESTVAL(Product,3,P);
  ENDIF
  IF (@ANCESTVAL(Product,2,V)! =@ANCESTVAL(Product,2,M))
  "P"=@ANCESTVAL(Product,2,P);
  ENDIF
  IF (@ANCESTVAL(Product,1,V)! =@ANCESTVAL(Product,1,M))
  "P"=@ANCESTVAL(Product,1,P);
  ENDIF
  )
  ENDFIX
  Fix (@IDESCENDANTS (Product))
  « V « = » P » * « T » ;
  ENDFIX
  ENDFIX
  CREATENONMISSINGBLK OFF SET;

  FIX (...)
  DATACOPY V and M;
  ENDFIX

  See you soon,.
  Alp

• Problem with PayPal IPN, please help

  Hello;

  I use this code to retrieve the information of the users of paypal, I correct NPI and he brings her to the fine, BUT here are my problems. I have 2 of them that I can't understand.

  1. when the information comes back it is URL encoded, how can I change this back to the normal format so the e-mail address use actually the @ sign and not % 004 and other issues with the information, that reminds me.

  2. I get an error. In this page, I have a form that is populated by information coming back from paypal, when the user submits the form to send that info as well as the new info that we need them I get this error:

  Element TX is not defined in the URL.

  The error occurred in C:\Inetpub\wwwroot\paypal\step2.cfm: line 60

  58 : <p align="left"><img src="../images/bridalText.jpg" width="257" height="59"></p> 59 : <cfset authToken="WIdGltUcQs9sLX8vbFzjejE6QyMsO9JQh96G_ZM1JIY8mNPfhVW-aOqJzvy"> 60 : <cfset txToken = url.tx> 61 : <cfset query="cmd=_notify-synch&tx=" & txToken & "&at=" & authToken> 62 :

  I know this is a lot of code, but it is quite simple. How to set TX in the form? and how to decrypt the information in paypal?

  My code: (I'm cutting a lot, so you can see most of what I do)
  <!-paypal IPN and code-->

  < cfset authToken = "NUMBER MYIPN GOES HERE" >
  < cfset txToken = url.tx >
  < cfset query = "cmd = _notify-synch & tx =" & txToken & "& at =" & authToken > "

  " < CFHTTP url = ' https://www.PayPal.com/cgi-bin/webscr?#query# "method ="GET"resolveurl ="false"> "
  < / CFHTTP >

  < cfif left (cfhttp. FileContent, 7) is "SUCCESS" >
  < cfloop list = '#cfhttp. ' FileContent #
  index = "Julian".
  Delimiters = "#Chr (10) #" >
  < cfif listGetAt(curLine,1,"=") "name" >
  < cfset firstName = listGetAt(curLine,2,"=") >
  < / cfif >
  < cfif listGetAt(curLine,1,"=") is "last_name" >
  < cfset lastName = listGetAt(curLine,2,"=") >
  < / cfif >
  < cfif listGetAt(curLine,1,"=") is 'payer_email' >
  < cfset email = listGetAt(curLine,2,"=") >
  < / cfif >
  < cfif listGetAt(curLine,1,"=") is 'address_street' >
  < cfset streetAdd = listGetAt(curLine,2,"=") >
  < / cfif >
  < cfif listGetAt(curLine,1,"=") is 'address_city' >
  < cfset city = listGetAt(curLine,2,"=") >
  < / cfif >
  < cfif listGetAt(curLine,1,"=") is 'address_state' >
  < cfset state = listGetAt(curLine,2,"=") >
  < / cfif >
  < cfif listGetAt(curLine,1,"=") is 'address_zip' >
  < cfset zip = listGetAt(curLine,2,"=") >
  < / cfif >
  
  < cfif listGetAt(curLine,1,"=") is "nom_element" >
  < cfset itemName = listGetAt(curLine,2,"=") >
  < / cfif >
  < cfif listGetAt(curLine,1,"=") is 'mc_gross' >
  < cfset mcGross = listGetAt(curLine,2,"=") >
  < / cfif >
  < cfif listGetAt(curLine,1,"=") is 'mc_currency' >
  < cfset mcCurrency = listGetAt(curLine,2,"=") >
  < / cfif >
  < / cfloop >
  < cfoutput >
  < p > < h3 > your order was successfully received. < / h3 > < / p >
  < b > < /b > < br > Details
  < style li = "line-height: 15px;" margin-left: 20px; "> name: #firstName # #lastName # < /li >
  < style li = "line-height: 15px;" margin-left: 20px; "> description: #itemName # < /li >
  < style li = "line-height: 15px;" margin-left: 20px; ' > amount: #mcCurrency # #mcGross # < /li >
  < hr >
  < / cfoutput >

  < cfelse >
  ERROR: Check to make sure that the game authToken value is EXACTLY what PayPal has given
  < / cfif >

  <! - end paypal IPN - >

  <! - my form by using the information in the IPN - >
  < name = "cfparam FORM.firstName" default = "#firstName #" > "
  < name = "cfparam FORM.lastName" default = "#lastName #" > "
  < name = "cfparam FORM.email" default = "#email #" > "
  < name = "cfparam FORM.cPhone" default = "#phone #" > "
  < name = "cfparam FORM.streetAdd" default = "#streetAdd #" > "
  < name = "cfparam FORM.city" default = "#city #" > "
  < name = "cfparam FORM.state" default = "#state #" > "
  < name = "cfparam FORM.zip" default = "#zip #" > "

  
  < name = "cfparam FORM.mype" default = "" > "
  < name = "cfparam FORM.bgName" default = "" > "
  < name = "cfparam FORM.bgEmail" default = "" > "
  < name = "cfparam FORM.bgAdd" default = "" > "
  < name = "cfparam FORM.bgCity" default = "" > "
  < name = "cfparam FORM.bgState" default = "" > "
  < name = "cfparam FORM.bgZip" default = "" > "

  < name = "cfparam FORM.message" default = "" > "

  <!-that's where it checks for if make sure that all required fields are filled, if not it publishes a message asking they fill in, if it is full, and then it sends an email with all the info in it and gives them a thank you message. I wanted to cut this part, you don't need the evidence, she, the problem is in my paramiters and form-->

  < cfoutput >
  < action = "" #cgi.script_name # cfform "method ="post"enctype =" application/x-www-formulaires-urlencoded">"

  < input type = "text" name = "FirstName" id = "first name" value = "" #firstName # "/ >"
  < input type = "text" name = "lastName" id = "lastName" value = "" #lastName # "/ >"
  < input type = "text" name = "email" id = "email" = value "" #email # "/ >"
  < input type = "text" name = "streetAdd" id = "streetAdd" value = "" #streetAdd # "/ >"
  < input type = "text" name = "City" id = "City" value = "" #city # "/ >"
  < input type = "text" name = "State" id = "Status" value = "" #state # "/ >"
  < input type = "text" name = "zip" id = "zip" value = "" #zip # "/ >"

  < / cfform >

  < / cfoutput >

  I also took a lot of fields that I need the user to fill out, but it's the meat of what I'm trying to do.
  Can someone help me? Please? It's driving me crazy!

  Thank you!

  URLDecode()

• Join with count() question, please help!

  Hi all
  
  I have this problem (probably simple) that I can't solve... I have 2 tables (tbl_system_engineer and tbl_task_request) here... (only relevant columns are listed below)
  
  tbl_system_engineer
  -id NUMBER
  -full_name VARCHAR2
  
  tbl_task_request
  -tr_number NUMBER
  -submitted_on_date DATE (date of work was presented)
  -ass_comp_date DATE (date of task must be performed)
  -closed_date DATE (date of task was officially closed)
  -applicant NUMBER (the id of system engineer, the person who created this task)
  
  The request is meant to summarize how many of the tasks of engineers system is as follows:
  -"past completion date" - how many tasks have tbl_task_request.closed_date > tbl_task_request.ass_comp_date SYSDATE or > tbl_task_request.ass_comp_date for the engineer
  -' The completion Date approach' - how many tasks have a tbl_task_request.ass_comp_date in this month, but not "past date of completion" of the engineer
  -The calendar"- how many tasks have a tbl_task_request.ass_comp_date > the end of the month SYSDATE and year
  
  Result set lines are supposed to look like...
  'System engineer full name', after the completion date County, approaching County end date, the time count
  
  
  Help, please!

  Hello

  Welcome to the forum!

  This is an example of a Pivot , where you want to GROUP BY a combination of columns and some columns appear different, not different rows as columns.
  The way to do that is to GROUP BY the expressions for which you want to tidy and use CASE expressions for others.
  For example:

  SELECT       e.full_name
  ,       COUNT ( CASE
                 WHEN  r.closed_date     > r.xyz_comp_date
                 OR    SYSDATE          > r.xyz_comp_date
                 THEN  1
                END
              )     AS overdue
  ,       COUNT ( CASE
                 WHEN  xyz.comp_date     <  ADD_MONTHS ( TRUNC(SYSDATE, 'MONTH')
                                                    , 1
                                           )
                 AND   r.closed_date     <= r.xyz_comp_date
                 AND   SYSDATE          <= r.xyz_comp_date
                 THEN  1
                END
              )     AS approaching
  ,       COUNT ( CASE
                 WHEN  xyz.comp_date     >= ADD_MONTHS ( TRUNC(SYSDATE, 'MONTH')
                                                    , 1
                                           )
                 THEN  1
                END
              )     AS on_schedule
  FROM       tbl_system_engineer     e
  JOIN       tble_task_request     r     ON     r.requestor     = e.id
  GROUP BY  e.full_name
  ;
  

  I do not have the versions of your tables, so I can't really test this. I suspect that some consideration for the NULL values must be added to the conditions of the CASE.
  If post you a small example data (CREATE TABLE and only relevant columns, INSERT statements) so people can test their ideas.

  Sometimes, especially when the columns are mutually exclusive, it is more simple calculate a value in a subquery, saying which column of output each line is associated with. That the calculated value is then used in the CASE expressions very simple in the main query,

  Among the features of this awkward site are ithat ir replaces what he thinks are naughty words with s.  I suspect that it happened in your message.  I guess that all of the columns with * are the same, for which I substituted above.