super slow start or not at all

Similar Questions

• Super slow wireless printing HP ePrint all-in-one B210a

  Hello, I just installed the B210 on my network

  I use an Airport extreme and a macbook Pro with 10.6 and the HP driver/app (latest) installed.

  Automatic detection with Hello went well.

  The printer stops after each line, and therefore the printing speed is less impressive.

  Thanks in advance for your time.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for the IP address of your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• 64 bit kernel + 3.2 Ubuntu 12.04 + installation package starts do not at all...

  Hello

  the problem is that I'm trying to install vmware workstation on a computer 64 bits 12.04 of ubuntu with nucleus 3.2. The problem is NOT the patch, because I do not even get there.

  I downloaded the installer bundle, changed the consequence of rights to execute from console and tried to start it with - switch or no switch. What happens is that it simply runs without any error message and returns to the command line prompt. Yes, I work in a shell sh, and yes it is executable.

  I have no idea how to solve the problem, because it seems that is not yet properly start.

  I already posted the MD5 hash of the bundle to see if the file may be damaged, but it is not the case...

  You guys may have any hint for me to find the number. Without any suspicion, which is causing the problem, I'm completely lost...

  Thank you!

  Kind regards

  ny_ny

  The directory was created with a unique name by the command-d mktemp a few lines before and is deleted by the Manager on_exit (see the last line in the HS - x log you posted).

  Here are a few troubleshooting steps (for which there is no need to be root, and it would be safer to run as a normal user):

  dd if=/VMware-Workstation-Full-8.0.4-744019.x86_64.bundle ibs = 15131 obs = 1024 skip = 1 | WC - c

  ... should output "341657700" (more a bunch of crud of dd).

  dd if=/VMware-Workstation-Full-8.0.4-744019.x86_64.bundle ibs = 15131 obs = 1024 skip = 1 | gunzip - c | WC - c

  ... should output "37212160" (more a warning of gzip on trailing garbage).

  dd if=/VMware-Workstation-Full-8.0.4-744019.x86_64.bundle ibs = 15131 obs = 1024 skip = 1 | gunzip - c | tar - tf | WC-l

  ... should output "797" (more a warning about trailing garbage).

  And Interestingly, the trash back WARNING looks like this would cause the entire operation to fail if the shell "pipefail" opt is set.  What does this command:

  echo $SHELLOPTS

  Show (from your root user account)?

  See you soon,.

  --

  Darius

• Impossible to copy .vmware bundle on network drive (super slow).  Do not have this problem with other files.

  I'm just copying my pack of Windows 7 .vmware to a network drive so that it is saved.  It's only about 7 GB (expanding) and is divided into segments of 2 GB hard drive (the default installation option).

  When I try to copy the file via the Finder, he said something ridiculous like 9 hours left!  I have a GB 30 Parallels VM I created (fixed size disk and do not divide into 2GB pieces) in the evaluation of Parallels and I can copy this whole file back on the network in one hour.

  What gives?  Anyone have any ideas why I can't copy this particular file in a reasonable amount of time?  The virtual machine has been stopped (except some services run in the background on the start of OS X) and the host has restarted several times without success.

  Thoughts?

  Thank you!

  1 stop, suspend, not from inside Windows Virtual Machine target.

  2. on the Virtual Machine library Windows ctrl + click on the target of the Virtual Machine and select Show in Finder, and then close merger.

  3. in the Finder, ctrl - click on the target Virtual Machine package and select to display the contents of the package.

  4. in the Finder, delete the Applications folder from the target virtual machine package and then empty the trash.  (To be noted that the Applications folder within the target virtual machine package will be recreated as necessary).

  5. now try to copy the target Virtual Machine package.

• Windows XP, when started, do not recognize all of RAM

  The BIOS says I have 512 MB of RAM, but when Windows XP boots completely and I check the properties on my general tab of the computer and I said I'm only 448 MB of RAM. The first times before my departure for the BIOS Windows XP said I only 248 RAM initially. What is happening with this? I realized that what was going on when I went to install a program that requires at least 500 MB of RAM and insofar as I had only 448 MB of RAM Windows XP says it would not install. Why Windows only recognizes only a part of my RAM and how I can fix? Windows seems to work perfectly, even if he does this. I can't understand what is happening. I have a HP Compaq Presario SR1620NX. If anyone can help the right answer, it would be GREATLY appreciated.  :-)

  Welcome to the forum.

  The on-board computer video.  Video memory actions integrated memory system.  Therefore, a part of the system memory is not available to be used by other programs.  The only way to solve this problem is by opting for a dedicated video card.  This adds the video card memory and removes shared system memory.

• Re: Portege R500 - slow start when no network

  Hello

  We have several laptops from Toshiba Portege R500 used by mobile workers.
  When they are in the Office that they start fine (connected to the network).

  But when not connected to the network, they take several minutes to start up to the logon screen.
  I checked the boot sequence and the LAN is the last still start on the internal HARD disk.

  No idea why they are so slow start when not connected?

  Hello

  I understand that your notebook is in the field and use parameters that are applied in the company network.

  Maybe the Vista (or XP) looking for these settings if you are not connected to the office network and the entire procedure takes a little longer

  May I ask what anti-virus do you use?
  Sometimes antivirus software might affect the start and might slow the procedure as a whole.

• Satellite L300-1AQ - slow start

  I bought one of these a few weeks ago. It takes more than three minutes to boot to the full desktop, I think that it is very poor. A friend has a non-Toshiba, which has a lower spec and it takes a minute. My son (even more low spec) Toshiba takes 1.5 minutes. I've already exchanged this laptop, but the alternative is just as bad - same again without installing any additional software. I contacted the assistance service, but they do not have much help telling me to use MSCONFIG and Google apps could be disabled - I've tried a few, but it made no difference. Most of the time is spent with a screen 'Please wait '.

  In my opinion a core 2 processor (T5800) with 2 GB of RAM it not delay it. If I can't get help from Toshiba or here then I will get a refund on this machine - much as I otherwise it - only 3 minutes to the loan is completely unacceptable, especially when it is lower spec machines are so much faster.

  Hello

  Many people here on this forum have reported the same. My answer is that you need optimal configuration of the operating system. If you have time, please take a look at thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=134947 where I described my experience with slow start.

  Please don't be confused because I write any other laptop model. In general this slow start is not mobile specific problem.

• Satellite A100 - Questions about slow start, not in the DMA mode CD drivers

  Hi all

  as you can see I have 3 questions:

  1. my Satellite A100-153 starts very slowly (current running avira antivir and sunbelt pfw only like on my other laptop which is older than this one, but not slow start)-anyone has any idea why (I would be very gratefull because I don't have reinstall win and all my stuff)?

  2 Nero tells me that my CD is not running in DMA mode - where can I check and fix this?

  3. drivers - am I forced the drivers supported on this site or can I use the drivers directly from the manufacturer (ATI for my graphics card, Intel for my chipset realtek for my sound and so on)?

  Help is welcome!

  Hello

  For me, it will be interesting to know what operating system you are using. Anyway, I'll try to give my short opinion on your questions:

  -many other factors may be responsible for slow start. It is usually the OS configuration. I'll try to find an interesting article, how to make faster starting and I will post it here for you.

  --entrer enter in the device IDE ATA/ATAPI controllers Manager, enter the properties for secondary IDE chanel and open the Advanced Settings tab. Is under transfer mode DMA if available? If this isn't the case, set it to please and after reboot check if the problem persists. DMA if available is usually defined as a default value.

  -In general, you can use it but it is well known that manufacturers of graphics card don't support mobile graphics cards and laptop manufacturers are responsible for.

  I recommend you to use the Toshiba drivers only. All of these drivers are put to the test.

  Good bye

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Slow start, stop, ~ does not etc. Help!

  I'll try and be as organized as possible.  If you think you know something that could help please let me know.  I really need my computer is working again!

  Problem:

  For probably 9/26 my computer worked do everything very slowly.  It's strange to me because it happened all of a sudden and it's generally pretty fast.  I called Toshiba and see what they could do, they just said to do a system restore which has worked for a day and then he returned to its slowness.  It works all programs slowly, everything loads slowly, often Microsoftword said it does not respond as well as internet Explorer.  My internet has been fast is now has slowed down a bit...

  My Info to the computer:

  Toshiba Satellite L305D
  3.00 GB RAM
  80% free space in memory
  Windows Vista Edition Home Premium
  Almost 1 year.

  If you need me to tell you anything about it or just ask.  I would really like to find a solution to this.

  What's new

  Good, then, a classmate and I have discussed the issue and I told them I don't think it was malware because I have two installed anti-virus software.  McFee and trend.  They told me that it is bad to have 2 because apparently, the programs will be fight between them?  So I uninstalled McFee, for now and simply tend.  Which fixed the problem immediately.  Now my computer works normally.

  Another friend is always worried that it might be a virus?  Any suggestions?  My programs pick up nothing, so not sure?

  Go to control panel > Performance information > advanced tools (left column). If you look up a few lines under performance issues, this will tell you if Windows knows what is causing slow starts and stops. If there's nothing there, you most likely have been affected by malicious software...

  Run these:

  Malwarebytes - http://malwarebytes.org

  SuperAntispyware - http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html

  They could get somewhere...

  Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• Very slow start, Services could not be started

  Hello

  I use Windows 7 Ultimate on my Vaio computer
  A few days ago, I experienced a very new problem for me, which is:
  -Start up Windows very slowly (welcome screen minutes...)
  -When I get home from office, it shows that windows could not connect to the "Event Notification Service"
  (- When I started to use the services of the window (click on desktop, taskbar, using network, or 'service' to enable the notification of event services...), I feel very slow loading, then hang up for minutes)
  -View event log services also could not start, so I couldn't see what happened. After you enable this service, I restart my laptop and same thing happens again
  -After it started to slow down, things worked normally (Internet explorer, other programs...)
  I did the things so far:
  -C' happened all of a sudden, I don't update or installed new programs
  -J' I have try start-up repair, could not find any problem
  -J' have disk check, nothing wrong...
  -Tried in safe mode, same thing
  Hoping to find a solution for this because this is my second post here, my previous post about blue screen due to USB_DRIVER... stuff has not been resolved, and I had to live with it.
  Thank you

  Dear Sir.

  I tried to follow your instructions and it worked.
  However, I had other problems and I tried to google out them, but I found solutions did not work for me.
  So what I did, I did an 'upgrade' to replace the files on my system.
  Problems with the services of the event disappeared, windows starts a little slowly, but the previous problems that I reported here are gone.
  then I found another problem with my office 2013 after I did the upgrade. Tried Google on solutions and still can't solve.
  I need office to work and I had to do a new reinstall my windows, so things are back to normal.
  I still think that my drive has problem, as about 2 months ago, I had the same problem (slow start), I have reinstall my windows, and then recently, it happens again.
  So I will wait to see this time, if the problem persists, I'll do disk check and allow you to see the report and hope that you could point to if my drive gone bad.
  Thank you very much

• After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

  After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

  You can not

• Satellite P300 - 13 M start not at all

  Hello everyone,

  My Satellite P300 - 13 M with the number of product PSPC4E start not at all!

  When I put my screen down, it automatically goes in hibernation. But the last time I did it was just too apparently... I ejected my battery and the adapter to see if it would start. Negative results. I handed over the battery and ejected from the adapter. Negative results. I connected the battery and the adapter. Negative, no results at all.

  This means the end of my laptop?

  Please help me as fast as you guys can't because it's my only laptop work.

  Thank you very much

  PS If you want specs, then I can't give you their. I don't know the specs by heart.

  > This means the end of my laptop?

  No doubt :(

  But try this: remove the battery and ac adapter
  Leave the laptop disconnected for a longer period of time (a few hours)
  Then press the power button / stop along 30 sec.
  Then connect the battery and the AC adapter and try to turn on the unit.

• I want to finish with the words, or if it does not remove all hotmail accounts and start cleaning up

  I'm blind to long to get the words of clutter. can we do without >

  I want to send an e mail and the spam message. I am legally blind and long to get jumbled words. I want to finish with the words, or if it does not remove all hotmail accounts and start cleaning up. ??

  The feedback forum is to post your comments on the web site of Microsoft Answers, only not to ask questions by e-mail.

  Any Hotmail questions belong to http://windowslivehelp.com/product.aspx?productid=1

• LaserJet Pro M201dw: Laserjet Pro M201dw - print very slow or not at all

  Hello - I bought a M201dw Pro Laserjet is approximately 3 months.  I just change the original cartridge as an idea of how much/little it has been used. It has worked well for 3 months but started printing very slowly, or not at all with in the last few days.  It is not a network printer, it is directly connected to my PC.

  Thanks for any help,

  Jim

  Hello

  Try going into the service of the printer menu and changing the USB high speed to full

  The printer will restart and will have the best speed for the connection

  So, make sure the USB under 6 ft s and s a direct connection print and PC (without REPEATER MULTIPORT USB or something similar)