Superdrive Apple USB drive problem

Similar Questions

• How to install a Superdrive Apple USB drive on my 1MAC who uses ElCapitain

  How to install a Superdrive USB drive on my new iMac that uses the ElCapitain operating system?

  If your computer came originally with a SuperDrive drive, simply plug.

  If so, Apple's SuperDrive USB is not intended if you wish, you can operate in editing a plist in the computer files.

  (138475)

• Pouvez the Superdrive Apple USB used with windows computer

  Can I use the Superdrive Apple USB with the windows computer

  Only on a USB Bus, which can provide more standard power 500 milliamps.

  Apple computers that support this drive directly have a USB function that allows it to attract more of the standard.

  Drive sharing

  If your Mac is not a built-in optical drive, and you must use a CD or DVD, you can connect an external drive as the SuperDrive Apple USB.

  You can also share disks of the optical drive of another Mac or a Windows computer that has the DVD or CD sharing Setup installed. Sharing of CD or DVD allows you to access documents stored on these disks and allows you to install some software.

• No Apple USB driver in Windows 10 Device Manager

  Is there a way to retrieve the Apple USB driver in Windows 10 Device Manager.  I downloaded the iTunes 12.3.3 yesterday and now he is gone.

  I tried

  • plug into each of my Apple devices (iPod, iPad, iPhone, iPhone 4S 6)
  • restarting my computer
  • disabled my virus protection software
  • synchronization with different strings (some Apple, others not)
  • my devices restart and try again
  • Uninstalling iTunes and reinstalling
  • Uninstalling iTunes and goes back to and older version
  • make a Windows system to a restore point when I could synchronize my devices

  My main problem is that I need to sync my devices and iTunes does not detect them without the driver.  Windows can detect my devices and they appear in the file Explorer.  I am also able to get pictures and videos I've taken off the power unit and on my computer with no problems.

  Anything else I can try?  I'm out of ideas.  Thank you!

  This can help:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  Refer to the section:

  If you are using a Windows PC

  and read carefully.  Depending on your version of Windows the Apple Mobile device driver may appear in different places.

  Other than that, the General adzice is to demolish EVERYTING associated with iTunes and reinstall.  See excellent iTunes for Windows troubleshooting page located at turingtest2:

  Troubleshooting problems with iTunes for Windows updates

  especially the section:

  Remove and then reinstall iTunes and other software components

• The conclusion for M - Audio MobilePre USB driver problem

  The conclusion for M - Audio MobilePre USB driver problem

  Use: iMac

  OS: El Capitan 1011.2

  The latest driver I could find was 1.8.1.

  Error message:

  Installation failed - Setup could not install the software because there was no

  available software

  I would use this hardware with Final Cut ProX 10.2.2 and Garageband 10.1.0.1

  A quick search seems to indicate the latest version of the driver to be 1.2.1 - there was no 1.8.1 I could find. It has been out for more than a year, so no mention of El Capitan, but it could work. I'll make sure that you have the right to download and try again.

• How can I configure my Superdrive Apple USB in order to operate in the United Kingdom?

  My iMAC (El Capitan) is configured to work in England.  I bought a Superdrive Apple UK USB drive but my iMac refuses to recognize.  Any suggestions please?

  If it is not found, return it for another. You can also reset the SMC and the PRAM but I don't think that you need on a new device.

  Reset PRAM and iMac SMC

• Re: Play Peek-a-Boo with USB - driver problem

  Hello

  So far, I had no problem with my laptop and windows 7 (32 bit), but there was a problem from the start. my system was not able to detect all the drivers, for the moment, I got 2 unidentified "base system devices.

  At least one of them has got to do something with my USBs, when I connect a plug & play carpet dance for my laptop, it plays basically peek-a-boo with me - recognize something was plugged, but without realizing realize that he is.

  One of my friends even phone sex and BONE, he had no such problems.

  When I try to install the utility driver Support page, suitable for my 'edition', it will stop saying that I have not the common module installed on my system.

  Any help possible? As said, some drivers are missing, which are supposed to make my USB hubs identify devices again, but I know who exactly do not exist, or where to get them.

  Thank you for every little trick

  Great! Thanks for letting us share this last info

• __Vista and external hard USB drive problems. __

  I have an old USB Maxtor attached an external hard drive with vista home premium.  It was working fine until I left for two weeks.  Now, vista starts up with this drive connected.  When I unplug the USB connection, it starts OK.    Second, but related.  I use this drive to Flash the pictures on the box of the gadget.  Works OK for a bit, then the photos appear more.  I redefine the source folder to make it work again.  The two problems are related to the external hard drive.  Is it vista, usb or drive?

  Any help would be appreciated.

  Vinnie

  Hi Vinnie,

  I suggest you try the following steps to refine the question:

  Step 1: connect the USB device to a different USB port and test it.

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  Step 2: Disconnect the USB device, then on startup, check for the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for the USB device, and then double-click the device name.
  3. under the gaze of general tab for the status of the device for any error code indicated.

  Get-help-with-Device-Manager-errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

  Step 3: Disconnect the USB device and start, run the fixit provided in the link below at the office level.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion dv6 - 6123cl: HP Pavilion dv6 - 6123cl - USB driver problems

  Hi all

  I tried to find a way to solve the problem I encounter without success, so I decided to join this community and hope that someone else came across something similar and has been able to solve.

  I have two identical HP notebook computers (HP Pavilion dv6 - 6123cl) and both of these computers have exactly the same problem. After you have reinstalled Windows 7 for some reason any USB ports on the left side of the laptop are not recognized by Windows, leaving me with only 2 USB ports available. I downloaded and installed all the official drivers from the HP site but the problem remains still. Device Manager will not find the drivers and it drives me crazy because all the USB ports on both computers worked very well so far. What am I supposed to do?

  Any help or suggestion is highly appreciated.

  You are the very welcome.

  Download and install both of these drivers and restart.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5098226&swItemId=ob_118744_1&swEnvOid=4058

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5098226&swItemId=ob_123787_1&swEnvOid=4058

  Do you need the SMBus Controller driver too?

  If so, see if it works...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

• USB drive problem external 250 GB - entered INI

  Hi all, I would appreciate your help if possible here. I have a shiny new Vista powered laptop and I am trying to copy my files from my XP powered Desktop via an external 250 GB drive. When I put the password in when I put the five USB into the laptop I get the following message: "entered INI in the path F:\ONSPCCDH. INI do not match data from the survey. Make sure that the INI file has the correct entry.

  When I look for this file, it is not here - someone has any ideas?

  THX,

  J

  Hello

  Maybe this thread can help http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20901

  Check it out!

• Series USB driver problem

  I have a Dell laptop running windows 7 pro and an external piece of hardware and cable that requires a USB to serial, Spplied by making driver to be installed. The pilot is right for w7, but when it is installed there is no connection to any com port, all external equipment works correctly with the driver and the program on a machine of friends also running W7. Is there some file or program that I'm missing? I tried changing usb ports and reinstalled the driver without success. Also, I can't find any reference to com ports on my computer.
  Help

  HS38

  (Former) Will drivers need to be installed in compatibility mode.

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > choose OS

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• No device USB Driver problem

  Whenever I plug a USB device on my HP Compaq DX2450 running XP P3 I can never get it to be recognized. I am currently using a portable USB 6 - LED Night Vision PC computer Web camera. It is not supposed to have all the drivers but my computer will not recognize. Any advice would be appreciated.

  Hi stewp00,

  What is the brand and model of your webcam?

  Can you provide a link to the manufacturers Web site?

  I suggest trying the webcam on another computer to test the material for the failure.

  If the computer doesn't recognize that a device has been plugged in, does not have the USB ports, the USB cable connected to the device does not meet or does not respect the camera.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Macbook Pro does not recognize the Apple USB superdrive

  My Macbook pro doesn't recognize the superdrive.

  I don't know exactly what is the cause, but everything was fine before certain events.

  Upgrade to El Capitan

  Upgrading to Parallels desktop 11

  Upgrade to Windows 10

  As I said before these changes everything was fine. Another problem I face is a lot of cuts of my wifi connection and I have to disconnect and reconnect the wifi.

  If anyone has any idea I would be grateful to have the explanation

  Thank you very much

  The Superdrive Apple USB attracts more than the maximum power allowed. It can be awkward on some MacBook Pro. But the question probably for your configuration is Windows has reserved the player himself, and the side Mac cannot use until Windows releases, or you do a restart.

• SuperDrive Apple MacBook with USB

  I have a new MacBook (so without a USB port). When I connect a USB SuperDrive Apple through an external USB port, I get the message "USB Device needs power. Connect 'Apple USB SuperDrive' to a USB port on the Mac "." Is there a solution?

  Thank you

  Fidelma

  You may be able to use one of the cards USB - C port supported that has a standard USB port and

  also a power at the port, so you can use the MacBook power adapter at the same time. Note the details

  What port provides data on the cards among other details here:

  • Using the USB - C port and adapters on your MacBook (retina, 12 inch, early 2015) - Apple Support

  The SuperDrive Apple USB should work fine with the 12-inch retina MacBook 2015 model; If it isn't

  then consider a visit an Apple store, and if necessary, make an appointment in advance for Genius.

  • Mac computers that can use a USB SuperDrive Apple - Apple Support

  If your SuperDrive Apple USB is an older model 2010, those who were intended to be used with MacBook

  Models AIR and not the later retina of 2015 MacBook 12-inch model. The vintage produced no importance.

  Good luck & happy computing!

• Windows 7 on my laptop, when I plug my apple Ipod classic to a USB port, I get a message that says: I need an Apple mobile device USB driver

  I have windows 7 on my laptop, when I plug my apple Ipod classic to a USB port, I get a message that says: I need an Apple mobile device USB driver. When windows search the driver it says failure of driver to install, I need something mobile apple USB driver. Can someone tell me where to find this driver. I installed Myapple and Itunes.

  Hello

  I recommend that ask you this question on the following support forums.

  iPod: Apple support communities: https://discussions.apple.com/community/ipod

  The experts, it should be able to help.

  Concerning