Support for alarms diagnosis field according to FF - 912 with NOR-FBUS Configurator 3.2.3

Similar Questions

• Satellite L50Dt - Support for Windows 7

  Hello

  I'm not a fan of Windows 8 (which is not safe) and I want to install windows 7 on my new laptop. The details are:

  M # L50Dt-A Satellite
  P # PSKM2A-009005

  Is someone can you please tell me if it is possible to find all the Windows 7 drivers needed for this particular laptop.

  I don't want to remove the file system if it is not possible because I delete the backup partition in doing so.

  Any help on this would be greatly appreciated.

  Thank you.

  Hello

  I checked the Australian support page for your laptop model Win7 drivers do not exist so there is no support for it so I think you should stay with Win8 and check if drivers will be offered following weeks or months.
  Please before make you anything create recovery (DVD or USB) media so that you can install original Win8 whenever you want.

  Of course, you can try to install Win7 and check if you can use the drivers available for other models of laptops, but it is hard work and you need to know the specification of the exact material.

• Hi, I recently bought an iPhone 5s. Now, according to the sources, the new "5se" would probably replace the ' 5s ' in the near future. I'm afraid that I won't get it more updated and after sales support for my 5 seconds (if any problem is found). Is this

  Hi, I recently bought an iPhone 5s. Now, according to the sources, the new "5se" would probably replace the ' 5s ' in the near future. I'm afraid that I won't get it more updated and after sales support for my 5 seconds (if any problem is found). Is this possible? Apple will provide an upgrade for free or minimum package 5se 5 seconds it's users?

  The terms of the terms of USE on this forum we cannot speculate on what Apple may or may not do. That being said, there is no priority for what you ask. There is no way of knowing how long your device will be able to continue to upgrade to new versions of iOS. As long as he is able to run the new versions of iOS, it is fully supported. This is the level of iOS, not the hardware that is important here.

  See you soon,.

  GB

• Satellite C870 - 1 H 2 and support for virtualization

  Hello

  I am (was to) buy a Toshiba Satellite C870 - 1 H 2 (from amazon.co.uk).
  The specifications look ideal for me, but at the last moment, I thought to check if VT - x extensions are supported.

  I know that the processor supports extensions (as detailed here: [http://ark.intel.com/products/71465/]), but I know also that the extensions are often not enabled (or there is no option in the BIOS to enable them).

  The expression "Virtualization Technology" (which is present on other pages of the specification) is clearly absent from the plug laptop here: [http://www.toshiba.co.uk/discontinued-products/satellite-c870-1h2/].
  I saw some comments that suggest the Satellite * Pro * series usually provides the support for virtualization, but it always seems to be missing on many current models of Pro's specifications.

  I don't know why the C870 would not support VT - x, when we know that his material, but the specifications indicate that this is the case. On the other hand, I found no references to people complaining about the lack of VT - x support.

  So my question is, the Satellite C870 - 1 H 2 actually does support VT - x, or not?
  (and if not, because it takes just a very small piece of code BIOS, why not?)

  Thank you

  > The same issue applies. These models are supported virtualization

  VT support is always depends on the CPU built in Notepad. But you mentioned it in the first post.
  According to the page of the Ark from Intel, the Intel Pentium 2020 M processor supports Intel Virtualization Technology (VT - x)

• Support for Windows 10 in Qosmio X 70 - has

  Hello

  I have a X 70-a, and according to the plan of Toshiba support, full support for Windows 10 only will be available January 31, 2016 ('coz that's what you get when you pay 1500-2000 euros for a cell phone, right?)

  Any who tried to win 10 on a similar laptop? Personally, I don't see what is the hold up and do not understand why they need half a year to offer support because most of the drivers Windows 8.1 should be available (assuming that they were well written in the first place).

  "That's what I get for a laptop of 1,500 euros" is exactly what I had in mind when searching for this Web site in order to get my windows 10 drivers only to find out that I am not on the priority of Toshiba.

  Keep the windows 10 update has an option to restore your old windows for a month (available in recovery at startup menu), I took the plunge by installing Windows on my 770 - 13F X 10.

  Here are the problems I encountered (I guess I'll find out later):

  -Windows installed a bad driver for the wifi adapter (Qualcomm Atheros) that makes the BSOD on startup. I manually installed a Windows 8.1 driver found on a non official (atheros.cz) in safe mode, with a second PC and a USB key.
  Win 10 then start over, but I can not activate wifi, both front panel and fn + F8 key for wifi doesn't seem to work. If anyone has a solution or just a hint...

  -The main Win 10 Search bar doesn't seem to be functional. It's weird and annoying.

• No support for Windows 10 for Satellite U920T?

  Does anyone has improved a Toshiba U920T to Windows 10?

  I only ask because this model is not listed in the list of Toshiba Tempro of models that can be upgraded. So I'm stuck with Windows 8.1?

  My part no is PSUL1E-00D00JEN. SER No.: ZC128613H

  According to this page of Toshiba: 'models supported for upgrading to Windows 10', the U920T Satellite will not get win 10 drivers.

  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Models not listed do not support an upgrade to Windows 10.

• Support for LabVIEW 2014 and CanOPEN cRIO-9067

  Hello

  We have NEITHER 9881 CANOpen communication module and cRIO-9067.

  According to the NI 9881 product description page the module should work with cRIO-9067. However, does not support the latest NOR-Industrial Communications for CANopen 1.0.3 2014 LabVIEW and NI RIO 14.0. This means that we cannot use cRIO-9067, can we? If so, when the next version of the pilot will be available? It will work with the cRIO-9030?

  Thank you in advance,

  Nikita.

  Hi Nikita,

  I wanted to let you know that support for the cRIO-9067 is available: http://www.ni.com/download/ni-industrial-communications-for-canopen-14.5/5234/en/

  Thank you!

• LabVIEW does not support for NI-DAQmx.

  Hello fellow programmers.

  I am an absolute beginner with LabVIEW and I have the problem that even if I installed the latest versions of the NOR-DAQmx (9.7.5) driver and LabVIEW (2013) I get the error message "LabVIEW does not support for NOR-DAQmx. Please reinstall.

  I created a task in the NOT-MAX. According to the tutorial now there should be an element in LabVIEW under "Measure i/o", but it is not. I carried the task via drag & drop in the block diagram, but when I want to turn in code, I get the above message.

  Operating system: Windows XP SP3

  Any suggestions?

  Thanks in advance

  Laura

  crossrulz,

  Thank you for your response. Well, I installed the latest version of NOR-DAQmx (9.8) and this time I also installed packages for the former executives etc and now it works.

• Support for Microsoft Windows Server 2003

  Hello

  Can you please let me know the end of support for Windows Server 2003?

  I manage and application that is currently running on Windows Server 2003 and will soon migrate to Windows Server 2012 but the exact date is not decided, as a lot of analysis should be done prior to the actual migration.

  Please let me know when Microsoft end this support for their Windows Server 2003 so that I can work on that accordingly.

  That would be really helpful. Any announcement already made by Microsoft on this? I found a few things online stating it would be 2015, but nothing seems to have come directly from Microsoft.

  Thank you in advance for the information.

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• no support for dv6768se

  No update for the dv6000 BIOS

  Careful, HP has turned to deception. I bought thousands of dollars worth of HP products. I recommend the purchase of HP in my official duties as a Director of engineering. However, I was disappointed by the performance and support in all cases. I have two machines where I couldn't write media to recover. The most recent is with my Pavilion dv6000 laptop. It has the problem of restarting which may be related to problems of overheating GPU NVidia. This is known issue and HP must have decided to let go without worrying about the goodwill of its customers.

  The details for the latest incident are:

  Seeking support, I called a number found on the site of HP. I was charged for the support of a partner HP from a foreign land only to make things worse.

  They say that when I called HP they Mobile is unsupported and is obsolete. So, why is me she charged?

  My flag will not re-start. The symptoms started he did a software update from Microsoft. The update restarted my system and suspension system. After a stop forced (pressing the power button for 5 seconds), I had a soft recovery screen. I did a restore and it restarted. It hung again. This time, the indicated recovery screen I couldn't move forward and to contact support.

  I tried to get it back to the factory setting. This has seemed to work until I did the updates and tried to restart the machine. It hung again. I made the diagnosis of HW, but diagnostic tests indicated no problems. Analysis of disk of Vista also no problem.

  Before I looked for support I found that instead of restart, if I made a stop, I could limp thought enough of the upgrade to Windows 7. However, the question remained, and she seemed to be associated with HW. That's when I called HP support.

  First of all, I told them (ITechLine) was associated with HW and I didn't not need remotely diagnose my machine. They insisted so I spent a day watching a tech do the antivirus scans and scan disk. Later, they said they had solved the problem, but the technology that has been doing Diagnostics admitted that the original question seems HW and remains.

  How I got the number of ITechLine from the HP website. May have been my mistake, and a better number could be found on the HP website. The loss of time can be, I think, a concealment deliberate by HP.

  Later, I called enough people at HP (even in a foreign country) to find the HP had decided to abandon the support for my laptop and I couldn't support or portions of their share for this machine. The person said that the technology was obsolete. It is also darkening; Since a SATA drive for this my machine could be found for less than $50 and would have more than twice the capacity. In fact, I could buy a new memory 2 GB SODIMM, a new hard drive and a new battery for less than $90. Phone support charged $149.

  I have a few web searches to find the GPU NVidia overheating problem was probably the cause. Then, I disassembled the laptop to clean the cooling fan. The reboot problem was considerably reduced. I can restart 5 out of 6 times, which leads me to believe that it is the GPU overheating problem.

  However, now I can't use the optical drive to start the Windows 7 support. It does not show in my computer. Also, I can't write recovery media using the internal optical drive. I knew it is the bios, because one of the stages that I found on the web had to reset the cmos to the original. I see that is not the most recent. By going to the HP site for the update of the bios, I find that they no longer have the update and my machine does not get detected by their auto detect process. Forgot it that they did the laptop.

  So, I have a laptop of brilliant almost new look that will not work and is unsupported. It is obsolete, even if the State of the industry has not really progressed for laptops. It is Wi - Fi enabled with a large screen and could run all the latest SW until 5 days ago. It is too light to be a doorstop good, so it is useless. All I can get from HP is denial, disappointment and a dress (with a foreign accent).

  Being an EE, I thought that HP a tester has been great and that HP would be able and honorable. It's the end of an era.

  Someone know where I can get the free bios update? It's not worth spending a lot of money after bad to pay for a service update of the bios.

  It is a forum for users of peer-to-peer support for HP products. HP maintains no official presence in this forum. It is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Here are the specifications of your HP Pavilion Entertainment Notebook computer dv6768se. Based on the information contained in the specification, this model is about 5 to 6 years. Years of the computer, this laptop is very certainly obsolete. You can find the update of BIOS, drivers and software for your computer on the HP support site at HP Pavilion dv6768se drivers and downloads. The most recent BIOS listed is;

  Description;
  This package provides an update the system BIOS. The update is installed on models of laptops using a supported Microsoft Windows Operating System. A reboot is required to complete the installation.

  Communicate the details;
  Exit the: 2011-03-30
  File name: sp52477.exe [1/1, 3.09 M]
  Version: F.34
  Compatibility: (MUST BE INSTALLED UNDER)
  Microsoft Windows Vista
  Microsoft Windows Vista (64-bit)

  Fix/enhancement;
  -Fixes a problem where the system stops unexpectedly in response and a warning window 0 x 124 appears when the laptop was turned off abnormally, then restarted.

  Please send Bravo

• Win 7 Support for Intel 865 G (HP D530 SFF) graphics card

  I recently upgraded my HP/Compaq D530 SFF model (small footprint) Pc in XP - PRO on Win - 7.  The upgrade was easy and went smoothly.  Update Windows automatically updated the driver ADI AC97 Integratd Digital Audio to worm 5.12.1.5410 and the driver Broadcom NetXtreme Gigabit Ethernet to worm. 10.100.0.0, which are listed by HP as Win-Vista certified.

  Unfortunately, it didn't automatically update the driver for the hardware Intel 865 G chipset motherboard graphics.  Instead, it installs a Microsoft "generic" drivers VGA game.  My D530 SFF special is a 2.8 ghz P4 hyperthreading, but according to the HP "Drivers WEB site" (for XP), all versions of the HP D530 has the same graphics hardware. so, my exact submodel should not really matter.

  Windows 7 runs strong (at least as well as XP) on this beautiful little PC.  In three days, it has generated NO 'system' or 'application' error log.  Win-7 notification Center, however, annoyingly tells me everytime I open a program of specific graphics of Win - 7 (even the game of Solitaire) that my video card is running in "software rendering" mode with NO hardware acceleration.  Even the Solitaire game runs very slowly, but it runs without error.  Microsoft "DirectX Diagnostic Utility" indicates that DirectX 11 is running correctly on my PC and it can't find ANY error.  It indicates (as I already knew) that hardware acceleration has been turned off.

  I tried to run HP softpac "sp31335.exe" to load the version "6.14.10.4396 has ' graphics drivers running on this PC when installing XP.  The softpac ends before doing anything with a message that says "Unsupported OS."  Because softpac graphic drivers are supposed to be 'XPDM"consistent, I suspect they will probably work with Win - 7 (even if they are NOT supported by HP and may have some minor problems).  In any case, I would put a "restore point" and give it a whirl.  What I have to lose, because there is NO data or programs installed on this PC (clean install).  In the worst cases, I just reload Win - 7.

  My problem: I can't go to the version "6.14.10.4396 has ' graphics drivers because of Installer softpac (i.e."sp31335.exe").  Is it possible that I can bypass the message 'NOT supported by the OS' and get the graphic drivers to install anyway?

  Update: I solved my problem.  Even if HP has structured its executable program SoftPac (sp31335.exe) so that it will not install the version of graphic XPDM driver 6.14.10.4396 on a HP D530 with Windows 7 operating system, Intel made this driver available on its WEB site and is available for download. ZIP format.

  During a search, however, I found a newer version of the Intel driver and installed.  The Windows DirectX Diagnostics utility reports NO errors and hardware acceleration has been turned on.  In addition, 96 MB of memory is allocated to graphics.  I ran for a good week with graphics performance at least equal to what was previously done under Windows XP.  Data for this download are the following:

  Intel (r) 82865G Graphics Controller (Microsoft Corporation - XDDM)

  Driver provider: Intel Corporation
  Driver version: 6.14.10.4656
  Driver date: 01/08/2006
  ----------------------
  c:\windows\inf\ialmnt5.inf
  C:\Windows\system32\drivers\ialmnt5.sys
  C:\Windows\system32\ialmrnt5.dll
  C:\Windows\system32\ialmdnt5.dll
  C:\Windows\system32\ialmdev5.dll
  C:\Windows\system32\ialmdd5.dll
  C:\Windows\system32\igxpxa32. CPA
  C:\Windows\system32\igxpxa32. VP
  C:\Windows\system32\igxpxk32. VP
  C:\Windows\system32\igxpxs32. VP

  Apparently, Intel provided this driver to Microsoft for inclusion on the installation disk of VISTA to 865G family support (and other).  I extracted the following excerpt:

  Q3: Intel provides drivers for Intel Graphics Media Accelerator 900 (Intel GMA 900) WDDM on platforms based on the Intel 915 Express chipsets?

  A3: Intel will provide support for WDDM drivers, starting with the Intel® 945 Express Chipset family and beyond. See question 5 below for a detailed explanation of the WDDM support on platforms based on the Intel® 915 Express chipsets. However, Windows Vista is supported on the Intel® 865 G, 915 G Express desktop PC and 852/855 GM chipsets chipsets mobile running XPDM (XP Display Driver Model) driver included on the Windows Vista install media. Windows Vista will install on these platforms, but advanced features such as Aero in Windows will not be enabled as XPDM drivers do not support Windows AERO.

  The text above was extracted from the following link:

  http://www.Intel.com/support/graphics/sb/CS-023606.htm

  The version 6.14.10.4656 driver I use successfully on my HP D530 is discussed in the following Microsoft Forum thread:

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/5406d400-e9ef-4A10-A913-3706c16b76d1

  The link to the actual pilot (who was eliminated on the previous thread) is as follows:

  http://CID-ad503689c74985c7.SkyDrive.live.com/self.aspx/public/Intel%2082865g%20Driver%20%5E5Vista-Win7%5E6.zip

  Hope this helps someone else, and I thank all the people who have created the references above.  My HP D530 now works FINE!

• Passport system: Add support for scrolling through the physical keyboard

  Hi guys,.

  as you know peripheral Pasport is the new support feature: scrolling in the list view/Scroll through the physical keyboard. It seems that this function should work automatically, but it is not working at all in my application. It works only partially to control the display of Web pages and only on the pages of the subsites of my web content.
  Looks as the root cause of this issue is the list view must focus to handle keyboard events. OK, so the workaround can be call requestFocus() on the list view. It's a job but only until I do not touch the other control or scroll this list via the screen point of view! Or for example my app can show popup by clicking on list view and when this popup will be rejected the focus won't return to the display of the list...

  So my question is what good way to add support for this feature? Do I really need to play with requestFocus()? Or maybe there's a simple way to always keep the focus on the display of the list?
  I really need help.

  I've added a few features such as

  requestFocusForScrolling()

  then get the signal of this active tab has changed, you can call this function to get the new focus

  or on NavigationPane if returning to onPopTransitionEnded () calling the requestFocus on page function now on top

  In my Pages, I always have a few features added like connect(), disconnect() cleanUp() init() and now also at the request of focus. In a few pages, these functions are empty, but I can use them in the generic functions where I only got one Page

  ----

  not easy to touch OS oriented to add a key activated area outside the screen

  It always depends on the field with the development: think of an Image when you change the size of gestures touch on keyboard or take a look at sales-charts where you "scroll" in the months of keyboard

  Same pages may also have ScrollView and/or one or several ListView - it's do you stunts where is the update for keyboard gestures.

• BlackBerry Smartphones far East language and other issues of Support for Bold 9780 - please provide your comments!

  Hello

  Here is my card for your info:

  BB Bold 9780 (bought 3 days ago - unlocked to carriers)

  My carrier - Vodafone (Australia) - BIS active

  Computers - Macbook Pro

  After some research on the web all day, I discovered that far East languages is not yet available on the Bold 9780.

  I understand that I must language of d/l a far east of the carrier (mine is Vodafone Australia), in order to read and input Chinese, Japanese, or Korean language on the BB. It's extremely frustrating, and I feel that we're going backward in the field of smart phones - globalization have been an important factor for many bright smart phone users out there.

  I have a few questions, I hope that you guys can provide comments:

  1. what kind of time we talk to have the language support for the far East region? I would never have bought the new BB (probably would have gone for the 9700) if I knew that East Asian languages is not available on the new BB! ?? I know that it is covered by the carriers, but surely RIM provides the build?

  2. as I am a newbie (I just 2.5 years of iPhones), I do not understand the concept (or it's documented all that clearly) to have a 5 device and software OS6? what the devil is the difference, or are they just the same? thinking, maybe this is... but why is already released OS6, but I still see the "last and best Device Software 5" throughout the site of BB? someone help me please understand this.

  3. is it possible that I can load an earlier version of the device software (Vodafone provides a Far - east Pak BB Bold 9700)? I tried several times, after running and unzipped the file in Desktop Manager, the device software is not even on my Desktop Manager (v6). is it because the Desktop Manager detects the version of my phone and does not allow vodafone to 9700 from the list of applications to load software? or does?

  4. on my MAC, I can't install the plugin App world - he says that it is not available on a Mac... How mac users supposed to do use desktop base access App World? I know that we are not a majority, but it is obsurd - that being said, I'm not unreasonable, I can live with that.

  5 make BB have phone support in Australia? again, I can live with not one, but I've seen feeling is also unreasonable.

  Please don't get me wrong - I could met whining - but I desperately want my new device works... I love so many things about the BB, and after taking the big step of the iphone, I find a lot of things that were never mentioned on crackberry, or any other site of fanboy of BB...

  Thank you in advance, look forward to your comments!

  PBM

  Hello

  Okay... Let's start first... these forums are not a communication channel / rim. These forums are rather a community of support to users. RIM offers zero frontline support... all support is carried out by carriers and authorized resellers, who have the ability to escalate into WHEEL if necessary.

  OK... with that of the road, we shall proceed:

  pbmpbm wrote:

  1. what kind of time we talk to have the language support for the far East region? I would never have bought the new BB (probably would have gone for the 9700) if I knew that East Asian languages is not available on the new BB! ?? I know that it is covered by the carriers, but surely RIM provides the build?

  Impossible for anyone here to know... or if they don't know, against the team of specialists on this site to reveal.

  Another interest is the fact that, through the agent download portal for your carrier indicated, your BB model is not yet listed:

  • https://www.BlackBerry.com/downloads/entry.do?code=B86E8D03FE992D1B0E19656875EE557C

  pbmpbm wrote:

  2. as I am a newbie (I just 2.5 years of iPhones), I do not understand the concept (or it's documented all that clearly) to have a 5 device and software OS6? what the devil is the difference, or are they just the same? thinking, maybe this is... but why is already released OS6, but I still see the "last and best Device Software 5" throughout the site of BB? someone help me please understand this.

  OS 6 is the next generation of BB OS (and there's even chatter on OS7 "out there"). The version the most recent supported by your operator is available via their download portal linked above (but with your conspicuous by their absence model number). OS 6 is now available for some model BBs only (I don't know if it has been released for your template declared BB). But the BONES are never published by RIM to the public... rather only to carriers who must certify and adopt an operating system and then release it to their users. The reason for this fall at the beginning of this post... they (carriers) are responsible for all support... so, they reserve the right to adopt or reject an OS that RIM just to present to them.

  pbmpbm wrote:

  3. is it possible that I can load an earlier version of the device software (Vodafone provides a Far - east Pak BB Bold 9700)? I tried several times, after running and unzipped the file in Desktop Manager, the device software is not even on my Desktop Manager (v6). is it because the Desktop Manager detects the version of my phone and does not allow vodafone to 9700 from the list of applications to load software? or does?

  You can use ONLY a bundle of BONES that is your specific model BB number... nothing else will work. A 9700 isn't a 9780, so OS packages are not interchangeable. The best procedure, that I know about (upgrading, downgrading, reload) load a bundle of BONES is here:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

  Note that this only works on PC, Mac. But, you are not limited with this procedure, for only your carriers OS packages. You are free to use any bundle of BONES of any carrier until it's your specific model BB number. If you choose to do, then everything just insert, between steps 1 and 2, the deletion, on your PC, a file named PROVIDER. XML.

  pbmpbm wrote:

  5 make BB have phone support in Australia? again, I can live with not one, but I've seen feeling is also unreasonable.

  I send back you at the beginning... all support starts with your carrier.

  Good luck and let us know!

• WebVPN - error: access method is not supported for the capture of WebVPN

  I'm watching a capture of webvpn on the SAA. I start the capture:

  test type webvpn user capture (entering a valid user name)

  Then I connect to the ASA to try to see track with "Using a browser to capture displayed data" as described in the setup guide.

  https:// / admin/capture/test/OCAP

  After login, I get this message in the browser:

  "Error: access method is not supported for WebVPN capture."

  If I stop the capture (capture test) before you try to connect, the error in the browser is:

  "404 not found".

  The/admin/capture/test/OCAP requested URL was not found on this server. "

  Any ideas greatly appreciated. Thank you!

  After some research, I finally found it

  DOC: Webvpn catches are recorded only in zip format

  
  

  CSCtg79320

  Symptom:

  WebVPN captures are only saved in zip format.

  Conditions:

  According to the following doc:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/WebVPN.html#wp1153077

  WebVPN captures can be recovered in the pcap format using the browser, which is incorrect. The document must be corrected.

  Workaround solution:

  N/A

  Thank you for your time and cooperation

  Portu.

  In case you have any other questions please note all useful messages and mark this question as answered

• Install streets & trips 2013 on windows 8 - "a licensing initialization error has occurred. Please contact customer support for further assistance. Error 0xC004D301 ".

  Original title: new installation of streets & trips 2013 on windows error 8.

  I have my windows 8 installation with the assurance that my products purchased from Microsoft survive the 8 Windows Reinstall "refreshed". Well all the Microsoft products were there but would not work. Each gave the error for rerinstall the product I did no problem except for the problem with the streets of travel & which still exists and is completely ignored by Microsoft, according to my research. The error is: "a licensing initialization error has occurred. Please contact customer support for further assistance. Error 0xC004D301 ". I tried all the suggestions that I have met on the internet. The most galling was given by Microsoft technology in its response to this problem. "The license data is probably corrupted" OK, makes sense, BUT how can I fix that you genius. Someone had managed to get the program to work after this error message?

  Success!  Hi John, I don't know if this will solve your problem because I am running windows 8.1 and tries to install streets & trips 2011.  But I had a similar symptom that you knew.  Here's what I did: just right-click on the icon in the start menu, select programs and features.  Uninstall all versions of Microsoft Visual C++ 2010, I had two.  Then I opened the installation dvd in Explorer, click right on dvdrun, marked the area run as long as administrator (not sure if it did anything or not), hit apply, then double clicked on dvdrun and everything worked.  I could install, validate, save, and run the program!
  A warning, I don't know what are the potential problems that may result in removing these two programs, I hope that if I run into something I can install them again without too much trouble.