Support for hardware and signature to the AIP SSM-10

We have a 5510 which we bought a map AIP SSM-10 for the SAA, which is already the subject of a support contract. We now want to add the hardware maintenance for the new card AIP SSM-10 as signature updates. Our Cisco provider is confirmed we will receive that updates of signature with hardware support (we tried to get a response from them since June or July now).

Could someone let us know what is the correct part number, and so we can ask the specific option that will allow both the material cover and signature updates.

I think it is need you

CON-SU1-AS1A1PK9 IPS, NBD SVC, AR ASA5510-AIP10SP-K9

support for Cisco smartnet

Tags: Cisco Security

Similar Questions

  • How to tune the signatures of the AIP-SSM-20

    Hi all

    When I connect my ASA IPS module, I see a lot of signatures with risk of HEIGHT, but they are not activated (ENABLED). I dould so it is recommended to activate all these signatures risk of UPWARD in the IPS. I think that if these signatures risk rating of the TOP, then they should all be activate to combat the threat to security. It will cause performance degradation if all are activate? or it crashes a part of legitimate traffic if all are enabled to combat the thrreat?

    I'll be very grateful for your help.

    Kind regards.

    No, it's definitely not recommended to enable all the signatures on IP addresses. It will certainly be performance degradation because it is not intended to be all activated.

    The team of Cisco IPS préactivés current signatures and twist the signatures on each update of the signature, if it is considered at high risk for security. Those who have been turned off are likely to be old signatures that are more current, at this stage unless you don't not patch your hosts to end. IPS will monitor and/or block threats however, it is always the responsibility of the administrator of the host to patch hosts. IPS will only prevent and guide you to patch the end hosts.

  • Does iOS App Store allows the old inherited app to download to support more hardware and software?

    I'm using iphone 4 on ios5.1 and can not download waze, instagram etc... because they ios7.0, app or the new paypal required ios8.0. (so even if I upgrade my ios to 7.1.2 I won t be able to use it, it s a big problem)

    There are many applications no longer works on ios5.1.

    At Apple archived older versions of applications and will make available this backwards compatible?

    Developers can submit apps for obsolete equipment and iOS version outdated on the App Store?

    Does iOS App Store allows the old inherited app to download to support more hardware and software?

    Thanks for your help.

    You can download older versions of applications if you have a computer or other device running a newer version of iOS. This explains how do.

    Install the latest compatible version of an application on an earlier version of iOS or OS X - Apple support

  • The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation.

    The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation. I can't do this because even when you type the parental email address in the password recovery, it does not recognize because because it is inactive. I need a Windows Live technician to reactivate the account and I don't know if I should put the email address of the account here for security reasons. My other question is also if you can't reactivate can you switch parental permissions to another account.

    -Thanks, Michael

    Hello

    What version of the Windows operating system is installed on your computer?

    I suggest you to refer to the following article in the Xbox and check if it helps.

    Xbox LIVE connection issues:

    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    If the steps in the section of the Xbox did not help, then it would be better to post the same question in the Windows Live ID portal and forum Xbox to get help. We have a dedicated team to help you with questions of this type.

    Windows Live ID Portal: http://www.windowslivehelp.com/product.aspx?ProductID=10

    Forums Xbox: http://forums.xbox.com/

    Hope the information is useful.

  • I constantly get a message saying "no support for IE8 and lower grades.

    * Original title: error message?

    I get constantly a message saying 'no support for IE8 and below' and its asking me to upgrade my browser... I don't have any idea what to do as a novice PC user... help please :(

    Hello

    Vista came with IE8 and the updated browser he received was the only one that ever. for IE9.

    But you need Service Pack 2 to install IE9 on Vista.

    Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

    It will also tell you which SP you have installed.

    Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

    Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

    Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

    Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

    Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

    This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

    http://support.Microsoft.com/kb/947366

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@

    Your best option would be to install Firefox, etc. on Vista.

    See you soon.

  • I need to upgrade my package to the student and the package photography teacher for students and teachers all the apps package. How can I do this?

    I need to upgrade my package to the student and the package photography teacher for students and teachers all the apps package. How can I do this?

    Manage your membership and your payment. Creative cloud

    https://helpx.Adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

    To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

    Creative cloud support (all creative cloud customer service problems)
    http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  • I bought the creative cloud for students and cannot access the document cloud.

    Hello.  I bought the creative cloud for students and cannot access the document cloud.  I thought that it was part of the overall agreement, but it just says my trial has expired and does not allow me to do something.  My payments were made.  The only reason why I

    Your subscription to cloud shows correctly on your account page?

    If you have more than one email, you will be sure that you use the right Adobe ID?

    https://www.adobe.com/account.html for subscriptions on your page from Adobe

    If Yes

    Some general information for a subscription of cloud

    Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

    Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

    -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

    If no

    This is an open forum, Adobe support... you need Adobe personnel to help

    Adobe contact information - http://helpx.adobe.com/contact.html

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

  • Just installed via Steam Fable III. Just after authentication and signature in the game finished

    Just installed via Steam Fable III. Just after authentication and signature in the game finished. Solutions?

    original title: Fable III does not start yet. Solution?

    Hello
    You can try to fix the game and check if it helps. If the problem persists then try to uninstall and reinstall the game.
    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  • How to disable AutoComplete for username and password on the page to connect ACS 5.3 GUI?

    Hello

    How to disable AutoComplete for username and password on the page to connect ACS 5.3 GUI? I have watched with in the Administration of the system GUI pages for example Sessions and can't find how to turn it off.

    Y at - it a CLI command I can run?

    Thank you

    Stuart.

    Try to update to patch 5.3.0.40.7

    Resolved questions in ACS 5.3.0.40.7 rollup

    CSCub40498 : the password in ACS 5.3 field has enabled auto operation.

  • What should I do if I accidentally bought elements of photoshop for windows and I need the mac version?

    What should I do if I accidentally bought elements of photoshop for windows and I need the mac version?

    You can try this site

    Exchange a product for a different version of the language or platform

  • whisch are OK for undo_retention and what is the difference

    Hi all

    whisch are OK for undo_retention and what is the difference


    SQL > select max (maxquerylen) of v$ undostat;

    MAX (MAXQUERYLEN)
    ----------------
    6060

    SQL > select max (maxquerylen) in the dba_hist_undostat;

    MAX (MAXQUERYLEN)
    ----------------
    17221

    Hi amal.

    You can use begin_time & end_time v$ undostat-> to specify the time interval that you want.

    A brief note, of what you discussed here:

    maxquerylen

    Identifies the length of the longest request (in seconds) in the Forum during the period. You can use this statistic to estimate the right setting of UNDO_RETENTION initialization parameter. The length of a query is measured between the open time of cursor for the last time to fetch/execution of the cursor. As the length of these cursors that have been read/performed during the period are reflected in the view.

    V$ UNDOSTAT is dynamic, display of the current statistics.

    DBA_HIST_UNDOSTAT displays the history of the histograms of statistical data to show how the system works. Available statistics include undo space consumption, simultaneity of the transaction and the length of queries in the instance. This view contains snapshots of V$ UNDOSTAT

    hope that helps.

    Kind regards
    X

  • Cannot access the AIP SSM via ASDM

    CISCO recommendations below:

    Cannot access the AIP SSM via ASDM

    Problem:

    This error message appears on the GUI.

    Error connecting to sensor. Error Loading Sensor error

    Solution:

    Make sure that the IPS SSM management interface is up/down and check his IP address configured, default gateway and the subnet mask. It is the interface to access the software from Cisco Adaptive Security Device Manager (ASDM) on the local computer. Try to ping the address of management of IPS SSM IP interface on the local computer that you want to access the ASDM. If it is impossible to do a ping check the ACLs on the sensor

    ----------------------------------------------------------------------------------------------------------------------------------------------

    I've tried everything recommended above. I can ping the host ASDM the FW and the SSM-10 module. Well, I ping the host machine and the SSM of the ASDM. I opened as wide as possible ACL. I changed the IP addresses and masks several times. The management of the ASA port and the SSM and the PC are on the same subnet.

    A trace of package from the PC to the SSM shows that it is blocked by an ACL rule, and yet I opened wide.   I've seen this kind of problem before and it was solved by applying the double static NAT, but I don't know how to do that if all the IP addresses are on the same subnet.

    Tried everything, need help from high level.

    The IDM software that comes with ASDM does not support java 1.7. The portion of the ASDM ASA supports 1.7 but launch the IPS cmdlet works only with 1.6. The TAC enginner suggested that I use the IME (IPS Manager Express) which is available for free on the Cisco's (http://www.cisco.com/en/US/products/ps9610/tsd_products_support_general_information.html) Web site.

    I've been playing with it today, and so far it seems to work pretty well.

  • The AIP - SSM to unused ASA connection interface

    Hi people,

    Perhaps, someone has already raised this issue, but I was unable to find anything relevant. We have an ASA with an unused interface (gig0/3). The sensor of the AIP - SSM is physically connected to this interface with the following IP settings:

    Sensor (192.168.2.2/30,192.168.2.1)---interface ASA (192.168.2.1/30)

    It's basically point to point connectivity, and I can reach the ASA of the sensor and the other way around.

    This design is dictated by the lack of a free port on the switch.

    Technically, it should work without any problems, but I can't seem to be able to reach the sensor. There is a switch between my PC and the sensor and the switch has the corresponding static route added. I can reach the switch sensor.

    Is there a security feature hidden I don't know that prevent communication with the sensor.

    And ACL of the sensor allows the traffic to all networks (0.0.0.0/0)

    With the sensor acl set to 0.0.0.0/0, the sensor must be allowing connectivity.

    You can use the 'View of package' command on the sensor to look at packets on the interface command and control to see if the packets are what makes the sensor.

    You say that you have a static route on your switch for the switch reach your sensor. Do you know if your PC is configured to use the switch as the computer's default router. If the PC is to use a different default router, then the other router should also the static route.

    The other possibility is that the SAA itself can be deny traffic.

    Since this is an ASA connected to the MSS interface, the traffic must be routed through the ASA. Standard firewall rules apply to this traffic. The security level of the interfaces can prevent traffic, and an ACL may be necessary in order to allow the circulation of your PC be routed to the SSM.

    NOTE: If you don't want to have to worry about roads, the other alternative is to make the network between the ASA and SSM to be an isolated network that only 2 machines know.

    You can then use PAT static to map a port on the inside of the ASA interface with the address of the SSM 443 https port and map a second port of the SAA within the interfaces to the address of the SSM SSH port.

    How your home PC would simply plug the ASA IP using these specific ports and the ASA would do the translation of port and transmit on the MSS.

    The SSM address could also be dynamically PAT would have on the SAA within the address, so SSM could start the connection to other machines on the inside network.

    Another alternative if you have addresses available on your inside network IP is to use static NAT instead of PAT. And just go forward and has the ASA statically map an IP network on IP of the SSM on the network that only the ASA and the SSM inside could know.

    In both cases the network between the ASA and SSM would not routable at, and you wouldn't have to worry of reproducing static routes anywhere.

    SIDE NOTE: A separate network for the SSM you Becase you will also need to NAT or PAT address of the SSM for the ASA to outside interface. In this way the SSM will be able to connect to Internet to download cisco.com auto updates, and/or pull overall correlation of servers cisco information. It's probably the same configuration that you would already other internal addresses, and just to be sure, you cover the SSM since you have it on a separate subnet.

  • To access the AIP-SSM-10 through the ACS

    Hye,

    Please, I would like to know if you can access the AIP-SSM-10 using a Cisco ACS account.

    Thank you

    IPS module does not support authentication to the ACS server.

    Please find the only authentication method for IPS in the following document:

    http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/IDM/idm_sensor_management.html

    Hope that answers your question.

  • Interface of the AIP - SSM

    What is the configuration of the AIP - SSM interface indicates?

    If this indicates that trafficking of this interface will be done, then what is the purpose to divert the traffic of asa good political order.

    Thanks, hope that I have answered your questions.

Maybe you are looking for