Support from Toshiba for Microsoft Windows Service Packs?
Does Toshiba provide the downloads
for the Microsoft Service Pack
(For example, Windows XP Service Pack)?
The easiest way for you to find information about the Windows Service Packs is to surf the site of Toshiba in your country and watch download & support.
You will find the a Service Pack Microsoft of category.
For example, the link for the Toshibe Europe is-> http://eu.computers.toshiba-europe.com/
Tags: Toshiba
Similar Questions
-
Hello
Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing.
Zone Alarm has a key valid license - but for some strange reason, he will not have, so I had to uninstall and reinstall ZoneAlarm - he tells me that I need this update - who will not come?
Note: Windows Firewall is turned on right now and when I look at 'exceptions' does not offer updates of windows as part of the selection list.
Please, any advice on this will be greatly appreciated.
Alan
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
You will receive the best help here.
See you soon.
Mick Murphy - Microsoft partner
-
Where can I find a Microsoft Windows Service Pack 3 CD cheap [but see below]
I wonder if you can help figure me out what to do with installing drivers and utilities on my Dell Latitude C610, but the CD that I bought for it didn't run at all. Very important, I don't know if yes or no I need to reinstall the drivers/utilities because initially, I tried to reinstall Windows XP for my laptop, but caused the computer system to stay in mode of resettlement which unfortunately probably means I need to install Service Pack 3 Windows [obviously due to this being the operating system and because I received this message] the file 'Asms' on the CD-ROM Windows XP Professional is required for Service Pack 3. Type the path where the file is located, and then click OK.]. The reason why I need none of the foregoing is to restore my laptop.
Download it from the site of Ms.
-
Card high speed does not work after installing Windows Service Pack for Vista
I just installed Windows Service Pack for Vista and now my card Sprint high speed does not work. The message I get is that the "peripheral No. is recognized. I was using the card top debit without any problems for over 6 months.
What can I do to get this corrected.
John
Assuming that the Vista SP2...
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc
My pc runs Windows XP Home Media edition. I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions." To maintain the stability of the system. Windows must restore the original versions of these files. Install your Windows XP Professional CD2. I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3. How can I stop this happening?
Hello
Step 1: I suggest you perform the SFC scan on the computer and check.
SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command prompt, type the following line and press ENTER:sfc/scannow
Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427 -
Satellite T110 - disk from Toshiba for Windows 7?
I would like to install just Windows 7 on my Satellite T110 and remove all the Toshiba Software/nag screens. I also have my own copy of ms office that I would like to install.
All additional drivers of supply will not be a problem.Can I source a disk from Toshiba for Windows 7? Someone at - it else here had the experience to do?
Thank youHey Buddy,
As far as I know, such a disk is not available but you can download all the drivers and tools on the Web from Toshiba site:
http://EU.computers.Toshiba-Europe.com > support & downloads > download driversIf you have Windows 7 64 bit, all drivers and tools that you can download on this page! :)
-
Windows service pack 1 for x 64 8007045 D-based systems error
I am trying to install updates, especially the windows service pack 1 for x 64 systems and I am getting the error 8007045 D. He gets almost throughout then this error appears.
Anyone have any ideas?
Ta
Hello Mummyd,
Thanks for your post. If please make your way through the troubleshooting steps below and let us know the results of each utility so that we can better help you get this issue resolved.
1. download / install and run the tool update system - CheckSur. You can download the tool from the link below.
Download the tool update system (64-bit)
2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator
Inside the command prompt, type sfc/scannow
For more information regarding the file system checker.
* If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
3. once the SFC is finished, check your hard drive for errors.
4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.
5. perform a Startup Repair, when starting, try to install the Service Pack.
We can't wait to hear back on your part.
See you soon
-
I lost my product key for Microsoft Windows xp professional
Respected
I lost my product key for Microsoft Windows xp Professional (including service pack 2) model 0504
Please guide me and sent the above said windows xp product key
Thank you
Tahir Abbas Shah
Hello
Thanks for choosing Microsoft Community!
If I understand correctly, you need help to recover lost Windows XP product key.
You can contact Microsoft Customer Central for additional help on this.
Here is the link:
How and when to contact Microsoft and support Customer Service:
http://support.Microsoft.com/kb/295539
Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.
-
Windows Service Pack 3 models breaks
I have recently installed Windows Service Pack 3. I have a few websites that use templates... Now when I change the template and update pages none of the pages updated... What's wrong?Reinstalled Dreamweaver and got it works...
Before installing Service Pack 3 from Windows I had to run a Microsoft patch subinacl.exe because I was getting "access denied"... http://support.Microsoft.com/kb/949377
Maybe this is what screwed up my installation of dreamweaver...Also painfully discovered that when reinstalling Dreamweaver, you must have the installation files in the correct directory it is initially installed in otherwise you get a message "insert media"...
Also after reinstalling dreamweaver had to rename C:\Documents and Settings\
\Application Data\Adobe\Dreamweaver 9\Configuration\WinFileCache-AD76BB20.dat and then re enable Extension extensions manager otherwise became errors Java Script from Dreamweaver and opening files. Thanks for your help to solve this problem, it is greatly appreciated.
-
Installation of Windows Service Pack 2 - spinstall.exe "Win 32 invalid app".
When trying to download Windows Service Pack 2, I get "spinstall.exe is not a valid Win32 application" which makes impossible installation. It was on the second and third effort.
The first time I tried to download and install the Windows SP2, I got "Extraction failed. amd64\update\update.exe is not a valid Win32 application.
How can I download Windows SP2 successfully. The computer is running Windows SP1?
You see the effects of a HIJACKWARE INFECTION!
Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) won't fix this!HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bTip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Measures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Windows service pack 1 downloads 99.9% but still comes up with error and does not?
jktjw,
Please post with the information requested here: what to post in the Windows Update forum
Start with the troubleshooting steps and post returns with the requested info and arises from the troubleshooting.Clean boot your PC, and then run Windows Update.
Reset the Windows Update components
Perform operations of KB883825
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Service Pack 2 frozen around 50%
Have executed the update in the Service Pack and it is installing, however, it froze around 50% and has been for about 50 minutes.
HELP ME PLEASE
XXXX
See...
Help: I got hacked. Now what should I do?
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) won't fix this!
HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bTip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspxMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Re: Windows service pack 3.
I downloaded the professional version by mistake I just need home edition of windows service pack 3. What I can do. ?? If I delete the service pack today he'll ruin everything? When I tried it said that my new computer, etc. would continue to work properly if I removed it. If I reinstall immediately the home edition of service pack 3 it will count?
Thanks to all those who can help you
Sachi
There is a single installer version/build for WinXP SP3, so you should be OK.
How to obtain the latest Windows XP service pack
http://support.Microsoft.com/kb/322389/~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Windows Service Pack 2 help?
Why did I get this error during the installation of service pack 2? (a component does not match the verification information present in the component manifest)
This forum handles Windows Update for Windows XP, Vista and Win7 problems, despite what you see at the top of this page or in the URL.
Why was he not SP2, not to mention SP3 installed years ago? If you still use Windows XP Gold or WinXP SP1, you cannot have a fully functional anti-virus application installed.
Help: I got hacked. Now what should I do?
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxBackup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:
5 steps to help protect your new computer before going online
http://www.Microsoft.com/protect/computer/advanced/XPPC.mspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bNB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the deletion appropriate before installing any Windows Service Packs or IE updates and before installing your new anti-virus application (which will require WinXP SP3).
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Measures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxGood luck!
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
When I try to install my windows service pack 2, it will feature do then to halfway through it comes up saying cannot copy file, then it cannot copy the name of the file appears as:
REDSHD. GIF
So, what can I do because I need to download so that I can get my updated anti-virus up-to-date. More what this file is and what it means?Rhonda
I was afraid you were going to say that. WinXP SP2 to SP3, should be installed years ago. As it wasn't, you can't possible have been running an application fully functional antivirus for recent years. Here's what you do now:
Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows. Please note that a repair installation (upgrade AKA on-site) won't fix this!
Help: I got hacked. Now what should I do?
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxHOW to do a clean install of ofHOW TO do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:
5 steps to help protect your new computer before going online
http://www.Microsoft.com/protect/computer/advanced/XPPC.mspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bSee also:
Measures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxGood luck!
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Maybe you are looking for
-
iPhone WILL not connect to iTunes; Is recognized by PC
So, I recently got an iphone which is an update of my 5 c which was a 16 GB to 64 GB. When I plug my SE however, it won't connect to iTunes. My 5 c doesn't always work, and all of my software is up-to-date. I tried the suggested driver update method,
-
The hardware found is not supported by this package idt
I reinstalled windows xp, but now I can not install the audio driver and get the error message, as shown in the subject line, I think I also downloaded the latest BIOS drivers but the problem persists. Here are the specifications of my laptop (that I
-
Re: Satellite M115 - CD player works sporadically
I've had my Toshiba for 5 years and for perhaps the past that 3 or 4 CD Player did not work properly. When I go into windows Explorer, the drive appears only occasionally.I'm not in the market for a new laptop, because I'm leaving the country for two
-
Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected
-
Wireless connection disappeared after pressing the button system Orange Cisco router WRT54G
Trying to connect to a printer Dell wirless to the router and has failed, after many tests to get the computer to recognize the printer as a wireless device. Recommended by Dell to refresh the router and I pressed the button in the above subject lin