Support memory computer format microtour HP 500 b

Similar Questions

• Failure of memory computer format microtour HP Compaq dc5700

  My computer as shown above has the 5 beeps and 5 red LED flashes of light from the memory, indicating that it is the failure of memory. Is it possible to reset the memory locations without opening my Tower? If theres no alternative solutions, it would be very useful. Thank you!

  You must open the tower and reinstall the RAM chips, there is no adjustment.  If it happens again, your ram may be defective.

• Updating BIOS for motherboard Μatx-IG41-H on format Microtour Compaq 500 b

  OK, here's my problem;

  I just bought a 4GB Ram DDR3 1333 Mhz Kingston for my computer format Microtour Compaq 500 b. But when I try to connect this new RAM for my motherboard, pc gives error of RAM and that it does not open.

  It works well with other computers.

  Support members told me to update my Bios, but I can't find any update file which is updated. The only thing I could find is the following; http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = HR & prodTypeId = 12...

  I hope someone can help me with this.

  Thanks in advance...

  Here is the HP Compaq Business Desktop ROMPaq Firmware (ROM family CPT006) aka BIOS downloads for HP/Compaq 500 b/510 MT Professional computer. These BIOS/firmware updates do not appear to address any memory related questions. HP/Compaq 5xxB MT maintenance & Service Guide;

  Memory:
  The computer comes with synchronous dynamic RAM 3 double rate
  (DDR3-SDRAM) dual inline memory modules (DIMMS).
  DIMM DDR3-SDRAM:
  Media memory on the system card can be filled with up to two industry standards
  DIMMs. These media memory are filled with at least one DIMM preinstalled. To achieve the
  maximum memory support, that you can fill out the card system with up to 4 GB memory
  configured in a high-performance dual channel mode.
  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:
  240 industry standard pins
  unbuffered PC3 - 10600 1333 MHz compatible
  DIMM DDR3-SDRAM 1.5 volts
  DIMM DDR3-SDRAM strips must also:
  support the latency CASE 9 DDR3 1333 Mhz (9-9-9 calendar)
  contain the compulsory particulars of the JEDEC SPD
  In addition, the computer supports:
  512Mbit, 1Gbit and 2 GB non - ECC memory technology
  front and double-sided DIMMs
  DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not
  support
  NOTE: The system will not work properly if you install unsupported DIMM modules.

  The total State "up to 4 GB' plug... which is in both slots, therefore each slot can only use a 2 GB DIMM.

• computer format microtour dc5800: BIOS dc5800 downloads hidden when Windows 7 is selected

  When I visit the download page for the format microtour dc5800, the update of the BIOS is visible if I select one operating system other than Windows 7. I'm sure that it makes the download that is difficult for many people to find. I assume that the latest version of the BIOS (1.59) is compatible with Windows 7.

  Hello:

  I recommend that you Flash the BIOS using the option F10 Flash ROM of system in the BIOS.

  Who uses only the files BACK and you don't need to still be under Windows Update the BIOS.

  If there is no update of the BIOS listed on the support page, that is who runs the Windows based flash method may not be compatible with W7, and there is a significant risk of causing irreparable damage to the PC.

  So yes, the update of the BIOS will work with any system operating, but executed the Windows based Flash utility should be performed only on an operating system supported listed on the download page of the BIOS.

• GP Compaq 6005 Pro format microtour: Reinstall a computer format microtour HP Compaq 6005 Pro

  Hello

  I want to install Windows 7 on several Compaq 6005 Pro format microtour (VN797ET).

  I have product keys Windows 7 Pro to the labels on the PC, it also says OS: Win 7 to XP Pro.

  But the keys to Windows 7 should work for Windows 7 Pro?

  How can I get a W7.iso that runs on the PC. I tried the Microsoft Download page:

  http://www.Microsoft.com/en-us/software-recovery

  When I enter they key I get the following error;

  "The product key you have entered seems to be for the software that came preinstalled on a device. Contact the manufacturer of the software device for recovery options. »

  Can I download a HP image somewhere? These keys function with a generic W7 iso (sp1)?

  Hello:

  You will need to order a set of HP for your PC recovery media.

  If you live in the USA/Canada, call this number... 1-800-334-5144

  If you do not, I have this old list of numbers of support by country.  I don't know if all the phone numbers are more valid.

  http://h50146.www5.HP.com/lib/doc/manual/desktop/business_desktops/6005us_332630_007.PDF

  Have the serial number of one of them handy to give to the customer service rep.

• I have a computer format Microtour HP 500b and it says memory of 4 MB max.

  I want to put in more memory.  Can I put the bios or something so I can install more memory.  I updated the bios to 6.05... I have windows professional 64-bit.  Any help is appreciated.

  Hi atti2dok,

  It seems that your chipset only supports 4 GB of RAM.  There is not any type of software or BIOS updates that would increase this limit.

  Here is a link with some info on your system memory:

  http://h18004.www1.HP.com/products/QuickSpecs/13724_na/13724_na.html#memory

  Let me know if you have any other questions!

• Computer format Microtour HP Pro 3010: Hp Support Assistant and LAN with Proxy authentication

  Dear friends,

  I would only know if and how I can 'use' Hp Support Assistant in my office desktop pc, because my desktop pc itself works in the breast of a LAN with proxy authentication.

  Thank you, Paolo ([Personal Information Removed)

  Hello

  Welcome to the HP Support forum!

  Yes, you can use it as long as the desktop PC is HP branded.

• computer format microtour 3515 PRO ethernet driver

  Hello, I'm trying to install all drivers Ethernet of my model, but nothing works.

  Where can I find an Ethernet driver?

  I post the hardware ID:

  PCI\VEN_1969 & DEV_1091 & SUBSYS_2AE0103C & REV_08

  Thank you!

  This is the page HP Support Center - Microtour HP Pro 3515 - drivers, Software & Firmware for your computer. Please download and install the driver card NETWORK Atheros for Windows 8. For Windows 7, you can try sp56899.exe HP or Driver Atheros Ethernet - HP sp57599.exe

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Computer format microtour 3015: Format microtour - downgraded to XP, but now want Windows 7 as licensee

  I bought a desktop computer with Windows 7 Pro OA - downgraded to XP Pro. I now want to use the Windows 7 operating system, but I have no media. I can't download the ISO from Microsoft over the license key does not, as it was preinstalled.

  I have not an option to recover to Win7, only for XP, please can someone send me 7 Media? or direct me to the correct download an ISO? Thank you.

  had a chat on-line with the help of HP Media is on the way, thanks

• Computer format microtour 3400: PCI Simple Communications controller 3400 format microtour FRI ID = 8086 (Intel) DEV ID = 1C3A

  I scoured everywhere for this driver. I know it's a driver of Intel Management Interface, but that the site does not work. Can someone point me in the right direction? I installed tons of drivers over the years and have a lot of experience, looking for unknown drivers, but when manufacturers doen't website work drivers, it's when I hit the wall.

  I found this information by clicking on properties - hardware ID and will pcidatebase find Fri (even if I memorized intel as 8086) and looking for a dev id. Any help would be greatly appreciated!

  Hello:

  See if it works...

  This package provides the original for the solutions Intel Management Engine Interface driver in the supported models that are running a supported operating system.

  File name: sp57372.exe

• Computer format microtour gen8: Microtower Gen8 deleted folder

  Hi I deleted a very important folder gen8 microtour HP, is possible to restore the date where he went? I have nothing in the trash of my pc...

  Hello

  One possible option is to try the following.

  Click the Start Menu, click your username at the top right.

  Make a right click on the folder was originally included in the document, and then select Properties.  Click on the "Previous Versions" tab and give it time to load (this can take a few minutes).  If you get a list of the previous versions, left-click one of the mentions just to highlight and open - if you see your listed file, copy it to somewhere safe.  If no file is listed, try to open another entrance.

  Kind regards

  DP - K

• Computer format microtour DC5750 AMD ATHLON 64 x gives 9 beeps and 2 beeps.

  my computer turns off directly when executing after that 10 minutes, which gives 2 beeps with red led flashing once a second, with a gap of two second.and with beeps beeps stop after the 5th time but led will Flash on

  If I try to restart it by disconnecting it and put back:

  After 30 seconds: she gives 9 beeps with led light flashes in the same way

  After 5 min: it turns on and works fine. but does more than 10 to 15 minutes.

  I had over heating problem that is solved now

  Hello:

  Please read annex a starting on page 56 of the Troublehooting manual on the link below, the list of beep codes, possible causes and recommended troubleshooting steps.

  http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c00765931-4%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

• computer format microtour dx2250: controller Bus SM dx2250

  I can't find the drivers for SM Bus controller

  You are the very welcome.

  I zipped and attached the file you need below.

  Download and uncompress the file in its folder.

  Click on the INFSETUP file to install the driver.

• HP DX7300 COMPACT MICROTOUR: UPDATE THE PROCESSOR FORMAT MICROTOUR COMPACT HP DX7300

  Hello

  I have a problem on my pc when I want to upgrade the CPU on my computer format microtour HP DX7300 to Core 2 duo E6850 3.0 ghz.

  After that, the shows black screen pc and prode 9 times beep. Grateful if someone can help me on this issue.

  Thank you

  Hello:

  Unfortunately, you have installed a processor not taken in charge for which there is no solution, but to remove it and install a supported processor.

  Please see page 7 of the link below for a list of processors supported in the dx7300...

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04284220 .pdf

  The E6850 has a FSB of 1333 MHz, and no with a 1333 MHz FSB processors will work in the dx7300 is why your PC beeps you 9 times.

  o-Processor-E6850-4M-Cache-3_00-GHz-1333-MHz-FSB http://Ark.Intel.com/products/30785/Intel-Core2-du

• Format microtour Dx6100 display problems.

  Hello

  I have a computer format microtour dx6100.

  I've upgraded to windows 7 64 bit and everything works fine except that I have problems with the display.

  The VGA output will not go in widecreen? I can't find a driver for this problem.

  I also tried to install an Ati x300se video card pci-e 128 MB that I thought it was compatible but it seems other people have got it to work in vista compatibility mode but I have no luck with it it keeps crashing when trying to install.

  Does anyone have any suggestions of what I can try?

  Regards, Alex.

  Hey, Alex:

  Have you tried this driver for the x 300?

  http://support.AMD.com/en-us/download/desktop/legacy?product=Legacy1&OS=Windows 7-64