Support very high-speed Modem

I'm doing now with my high Modem or a high speed modem (DOCIS 3.0) can Firefox (Version 10.0) handle this?
I'll run to about 5mbs/s - Upload and Download of 20mbs/s about.
Thanking you in advance.
JOE
[email protected]

You may need to wait for a response for more than three minutes, it's not instant messaging or chat.

Yes, Firefox should work correctly with this type of broadband services.

Tags: Firefox

Similar Questions

  • Very high speed of CPU!

    Last two days, I have experienced a few problems. When my computer is turned on, the gets (98-100%) very high CPU speed and after a few minutes my computer hangs and then I have to turn off in strength. I'm not an expert on this issue, so I would appreciate your help.

    Here are the specifications of comp.:

    Windows Vista Edition Home Premium Copyright 2007 Service Pack 2

    Hewlett-Packard-Compaq Presario A900 Notebook PC

    Class 3.1

    Processor Intel (r) Pentium (r) Dual CPU T2370 1.73 GHz 1.73GHz

    2.00 GB RAM

    SystemType 32-bit

    .. and what are the process when I open the Task Manager:

    Sidebar.exe, Opera.exe, taskmgr.exe, dwm.exe explorer.exe, SndVol.exe, ehmsas.exe, ApMsgFwd.exe, NMBgMonitor.exe, ehtray.exe, HpqToaster.exe, iTunesHelper.exe, avgtray.exe, igfxsrvc.exe, SearchSettings.exe, jusched.exe, HPWAMain.exe, hpwuSchd2.exe, MSASCui.exe, QLBCTRL.exe, QPService.exe, IAAnotif.exe, Apoint.exe, igfxpers.exe, hkcmd.exe, igfxtray.exe, WiFiMsg.exe, Apoint.exe, unsecapp.exe, ApntEx.exe, winlogon.exe, NMIndexStoreSvr.exe, csrss.exe

    I tried to run scans with AVG, but my computer froze during the scan, so I couldn't finish it.

    Thanks for help.

    Hello

    Use this utility to see if you can work on the causes. Work in Mode safe when necessary.
    repeatedly press F8 that you start.

    ----------------------------------------------------

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems). You are using AVG which could have a role in the problem.

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Tecra Z40-A-176 - how to get support for high speed Port Replicator III?

    Hello

    a customer garage bougt some Tecra Z40 A 176 with high speed Port Replicator III. Unfortunally to either the displayport Port replicators is not working properly and I want to have the support so.

    What I found was the support for laptops page itself, but not for the port replicator.

    With regard to:
    Klaus

    I want to have the support so.

    What do you mean by support and what is the problem with the display port?

    If you have hardware problems, you can contact your dealer or contact the Toshiba authorized service provider that is available in your country.

  • Very high speed of the HP Pavilion HPE h8-1120une fan

    Hello!

    I got a desktop computer HP Pavilion HPE h8-1120une for about 2 months now and he was executed brilliantly (Windows 7 64-bit).  This morning when I turned on, the computer was much stronger than usual.  Installed the latest BIOS and F10 had started to see that the speed of the CPU fan 4500 rpm and the system fan speed 2500 RPM.  This seems quite high.

    The noise is obviously a bit annoying! Any ideas how to solve this problem would be much appreciated!

    Cheers, Davo

    Hello

    First try this procedure .

    Use a can of compressed air to blow the dust out of the heatsink from the CPU, although with a cold PC it might not solve the problem.

    Try to clear the CMOS memory.

    You might consider trying the B key over the Windows key, and then press the power button.  This could the bios image backup pickup if it is stored on the PC.

    Contact HP support and ask the ROM/BIOS recovery procedure. Recent HP PC will store a backup of previous BIOS level.  HP support number is 800-474-6836 or 800-HPINVENT or online here.

  • Satellite L300 14 c: drivers XP for display & high speed Modem

    Hello!

    I have loaded Windows XP - SP2 on Satellite L300 14 C model PSLB0E-02T01XGR.

    Almost all drivers are in & work fine except the following:

    1. impossible to locate the display driver. Display resolution limited to 1024 x 768. Try to load the driver for the Intel 965 Chipset for Vista, but rejected by XP!

    2. 'FN' key does not not for BRIGHTNESS control. Display at FULL INTENSITY. Not tried other combinations. But the FN + F5 works to control internal/external switch.

    3 driver for HD Audio Bus MODEM device could not be located. Can tell me what kind of MODEM is it & how do I use it?

    4. in the installation of XP, I have chanaged the disk HARD to "Compatibility" SATA controller mode Now is it advisable to go back to the 'AHCI '? XP starts after that?

    Please, help me at least a 2-point first, I'm desperate! Concerned with life LCD & my sight! ......

    Hello

    It's good that nearly all drivers are working.

    Here´s tips for drivers and the remaining machines:

    1. go to www.intel.com and download the graphics from there driver. Search for the 965 chipset, and you will find...

    2. What do you have installed? Toshiba tools? I wonder that you have even the function Fn + F5, I mean, do you have installed the Vista drivers?

    3. the modem device is Conexant, so you should check google for Conexant modem drivers. If Don t you know what a modem is then see [LINK: http://en.wikipedia.org/wiki/Modem]
    4 it s NOT recommended because if you set it to AHCI mode your OS windows is unbootable because you installed your operating system in compatibility mode, which means:
    the BIOS emulates a port IDE and SATA - HARD disk does not natively work in AHCI mode: http://en.wikipedia.org/wiki/AHCI

    That's all...

    Welcome them

  • How to get sync high speed off faster with a 60 d and 430 ex ii camera?

    I try to get my speedlite 430 to sync high speed with my camera off camera.  Once I did all that I can't get a shutter speed of 250.  I need the higher speeds for what I want to do and I need the flash off camera.

    What do you use to control the 430EX II off-camera?  You have a speedlite controller or another flash speedlite?

    The 430EX II supports Sync high speed when it works as a remote off-camera/slave flash, but it's automatic.  If the flash unit is set to use high sync speed then the slave will also use high sync speed... you have not actually the value of the slave in sync mode high speed.  (See page 29 of the manual 430EX II).

    If you use the built-in on the 60 d flash to trigger the 430EX II then this could be the problem because the built-in flash does not support Sync high speed.

  • Portege R930 - 1 d 0 + Replicator port dual monitor supported high speed II - taken

    Hello

    Crossing a Portege R930 - 1 d 0 high speed port replicatior II.
    Is it possible to dual-display output?

    Thank you

    You hear the internal + external display by the dual display or you mean two external monitors?
    Speed Hi II port replicator supports the RGB port and display port and HDMI port but (display port and HDMI) can not be used simultaneously.

    You can use the internal s for computer laptop HDMI port and for example a the Hi speed port replicator II ports to connect an external monitor.

  • HP320 - 1120 m: what a modem & router would work after the upgrade to high speed internet?

    I just upgraded to high speed internet through TWC. I need a new modem & router to be able to take advantage of this. Those who would work with my PC? I also need to get an external drive as my C: drive is almost full. Is there a limit to how much to, this could be for my system? Is there something in this system that I could upgrade to help with network reliability & speed?

    HP320 - 1120 m AIO.
    10 Home 64 bit Windows
    Product # A5W91AV #ABA
    CPU: AMD E2 - 3200 APU with graphics Radeon (TM) HD
    Motherboard: Pegatron Corp. 2ACB version 1.03
    BIOS: FRIEND worm: 04.06.04
    Memory: 6 GB
    Wireless network
    465,76 GB Hitachi SATA drive
    NTFS
    BK peripheral backup USB Seagate +.
    HP Officejet Pro 8600 AIO printers
    Series of printers HP Envy 100 D410

    Thank you for the additional information.

    I have the same speed with my ADSL.  I use a laptop game Omen HP with an Intel 7260 half wireless mini map.  My router is an ASUS RT-AC68R.  My router and DSL modem are on the second floor with two walls and a floor between them and my laptop.  I get speeds between 28 and 30 MB/s with 5.26 upward.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Internal Bay wiring HP z800 does support higher speeds?

    Hello

    I'm interested if internal Bay wiring HP z800 supports higher speeds - 12 Gbit/s and 6 Gbps?

    Or should I use berries 5.25 "to mount and connect directly to the controller SAS 12Gbps with data speed has approved longer cables?

    Thanks for the reply

    HDD Bay Z800 wiring was not validated to 6 Gbit/s or 12 Gbps speeds for SATA or SAS drives.  The higher speed drives were 3 Gbps when the Z800 was released.

    It is better to use the berries, 5.25 "and connect the readers directly to the SAS 12 Gbps controller with high speed cables.  6 Gbps PEUT work with internal wiring, but 12 Gbit/s is too high.  Higher approved data cables speed superior to 6 Gbit/s and 12 Gbps avoids any problem.

  • If I have two modems in the same office... windows xp can combine two connections at higher speed dial... my question is can I do the same thing for the dsl if I have two lan cards?

    If I have two modems in the same office... windows xp can combine two connections at higher speed dial... my question is can I do the same thing for the dsl if I have two lan cards?

    Hi cliffwho

    You can fill with connections to the LAN. However I recommend you read this first to understand what it is that you do. I hope this helps.
  • I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

    I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    It will be useful.

  • HID of USB 2.0 high speed, broadband, end points supported for windows 7?

    I have a .net Application which reads the data from the USB from a HID device continuously in User Mode. The HID device using a size of 1024 bytes report and is configured to 3 Transactions by microdot. Also, the interval is configured correctly.

    Ideally, the USB should be able to receive data @ rate 24 MB/s. But my application cannot receive data @ 8 Mbps rate.

    So I wanted to ask if it's a question related windows or the drivers for the HID devices high bandwidth high speed, or can it be overcome using kernel-mode drivers. Or if there is anything else I may be missing

    (On USB 3.0 hub unit communicates successfully with the PC @ 24 MB/s. "So I don't think it's a device related issue).

    Thanks in advance to all who try to help :)

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

    If you give us a link to the new thread we can point to some resources it
  • Can I use a connection high speed in safe mode?

    I have something to do in safe mode with internet connection, but I only have a Modem high speed and the computer does not detect the modem how can I use my broadband in Mode safe mode pls help me

    This is not surprising.  For networking Windows in safe mode uses a limited set of common standard network built into Windows device drivers.   It is the basis of the concept of safe mode which can be used to deal with 3rd party driver problems.  Windows does not have a driver for each possible network card / device.  Mobile Broadband are exclusive and very probably not be supported with a native Microsoft device driver.

    What is, is that you need to do in safe mode with networking?  If it is really essential, maybe you could do it on the site of knowledge where you could plug their router.

  • WiFi unstable and slow Internet high speed

    Hello world:

    Recently, I am facing a problem of unstable wifi, slow speed of the internet of my macbook pro. I hope someone could help me with my problem.


    Symptom:

    Internet mainly speed just unstable using a wifi connection. (no problem with wifi connection self and my wifi suddenly grave would not be)

    Example:

    • FaceTime with my friends and the connection would suddenly abandon or images & audio gets fuzzy.
    • Videos in online streaming and suddenly occurs buffering.
    • Download file of software update iPhone via iTunes, the speed is slow, he needed to take 2 h at the end and later on a window display "cannot download and check your internet connection".
    • Suddenly cannot open websites like site apple.com, google.com. Sometimes it will take more time to open Web sites.

    Hardware and software:

    MacBook Pro mid-2009, OS X EL Capitan 10.11.5

    ISP: Cox, 50Mbps

    Modem & router: Netgear N450

    Test:

    Turn off my wifi and connect my macbook pro with modem & router with cable, internet high speed is stable and fast. Internet speed download speed test result display is of around 60Mbps, download speed is around 8Mbps. And I tried streaming using the connection cable, there was no buffering.

    I already tried the possible Solutions:

    • Restart the Macbook pro and restart Modem & router: will not work. I mean the internet will be very well at first, but later would be unstable again.
    • Reset Wireless Modem & router and change channels: useful, but not completely solve the problem. After you change the wireless channel, I tested my internet speed and the result showing 20-40Mbps (slower than 60mbps) speed download. Sometimes, the result will be like 6-8Mbps and sometimes it will be 60Mbps. If its unstable.
    • Wireless diagnosis: result indicates connection is good.
    • Called my ISP provider: they checked and said all right.


    Other Questions & details:

    • The internet is ok for most of the time. But when all of a sudden I can't open site or I can't download and streaming & FaceTime at normal speed, his frustration.
    • I thought it might be related to my hardware since its an old macbook pro. I can't run Apple hardware test because I don't have the installation disc more and my macbook pro is very old. Is it a third party software that can perform the test hardware on mac?
    • My wifi used to be very stable and I don't have to worry. Just for these last two weeks.



    I really appreciate your time and help! Looking forward to any reply!

    Wi - FI connection drops

    Connection Wi - Fi in OS X Yosemite problems

    Wi - Fi in OS X Yosemite connection problems (2)

    Connection Wi - Fi in OS X Yosemite problems (3)

    WiFi potential temporary fix - Yosemite

    Also try turning off Bluetooth.

    WIFI AND BLUETOOTH FINALLY SOLVED, NOT REALLY - YOSEMITE 10.10

    If your Wi - Fi source is capable of generating a 5 GHz Wi - Fi network, try that in order to avoid conflicts with Bluetooth.

  • Super High speed internet Time Warner installed (50mbps) but foxfire operating only at 1.35Mbps, while the internet Explorer works fine

    Internet (50mbps) Time Warner installed high-speed yesterday on my computer, but when the guy left I noticed that the speed was very slow. SIS one test on speedtest.net and found I was getting a maximum of 1.35mbps (sometimes as low as .62mbps). So I had them come back and they tried all kinds of things, only to discover Internet Explorer gets 50mbps, so it's something with Foxfire. What would it be?

    Hello, when you use speedtest.net or a similar site based on flash to measure your connection speed, it could be a problem with the protected mode that adobe has implemented for its flash plugin for firefox. Some older versions of f-secure or report of trusteer are known to cause slowdowns with flash, or it could be something similar on your system that interferes (maybe security software that block/sandbox the container used for protected mode, etc...).

    as a solution, you could try downgrading of 10.3 flash (which is always supported) or Disable protected mode & see if that makes a difference.

Maybe you are looking for

  • No menu, accidentally not closed the toolbar functionality

    Toolbars have been cleared and unintentionally liquid. Now, I can't do anything... How can I get the menu back features This has happened Just once or twice

  • Cannot get my RAZR M to encrypt

    I tried to get my RAZR M to encrypt 3 times, but each time he just starts in normal mode and not to start the encryption process. I run on Verizon with the latest version of KitKat 4.4.2 Thank you for your time

  • Disable the single column of Table

    Hi all It's perhaps something very stupid to ask. Would have a Table control in which two first column will not be editable by the user and remaining user. How can I go about disabling the two columns of the table control? Thanks in advance.

  • error in windows live essential. Photo Gallery causes my pc down

    I had Windows Live essential on my Windows XP. For some time... When you use the Live Photo Gallery and upload new photos. my machine locks up and then crashed... The next time I loaded Photo Gallery, he had problems reading the odd file and on scree

  • Tablet - Question API

    Hello because I'm not too familiar with the BlackBerry Tablet API or the Adobe AIR APIs, I have two questions on whether or not it is possible: 1. can I configure VPN appliance settings programmatically? 2. can I lock or wipe the BlackBerry Playbook