Supporto brain fees by PowerEdge R730
Buongiorno,
Ho UN PowerEdge R730 labor-intensive e I like cute brain che abbiamo gia fees to casa.
Osservo che is cute I have brain su una dell'apposita sleigh. E' possibile acquistare queste slitte?
Buongiorno,
slitte del Server non sono acquistabili como iPhone, we can is sostituirle to una di essa malfunzionante e.
Marco
Tags: Dell Products
Similar Questions
-
ESXi 5.1 updrade to 5.5u2 PowerEdge R730
I had a few R730 brand-new which comes preinstalled with ESXI 5.1 u2, on flash cards double and the size of each of them is 7 GB
What is the procedure to upgrade the esxi 5.1 to 5.5 on PowerEdge R730 using the iso dell custom", and 7 GB will be sufficient for the upgrade process?
Thank you
* boot ISO shows datasore and two data warehouses 7 GB 300 GB *.
Alshawwa,
The process is simply to run the update with the ISO custom. I guess that the hypervisor resides on SD cards, so if this is the case, then select for update. The 7 GB is more than enough space for the hypervisor and upgrade. ISO is just show hard drives, as well as 2 redundant (7 GB) SD cards.
Let me know how it goes.
-
RAID 1 support on Dell PowerEdge R730 with SSD and Perc H730 discs
Hello. I am looking for some info on RAID usage with SSDS on our server:
Dell PowerEdge R730
1 GB for the PERC RAID controller cache internal H730
200 GB Solid State Drive SAS mixed use MLC 12 Gbit/s, 2.5-inch
OS Windows 2008 R2 (for now)We would like to know if it is supported to use two SSD drives in a RAID 1 configuration.
What are the risks?
Suggestions for others / the best solutions?
How the controller or the handle of the Garbage collection, Trim and other techniques SSD SSD?
Are there solutions in place for Wear leveling and how do they work?
What are the methods of protection for the I/O failures for these SSD drives and / or PERC controllers?I hope you can answer (some of) the issue or point me in the right direction for some Dell documents on this subject.
THX
Arjan
Hello Arjan
Yes, you can use SSDS in RAID 1.
The controller supports the TRIM and cancel orders mapping. SSD MLC are grade consumer SSD which will not have the life expectancy of SLC.
http://www.Dell.com/learn/us/en/04/campaigns/Dell-RAID-controllers
Thank you
-
Brain price DELL POWEREDGE R720
Buonasera,
Vorremmo ricevere quotazione by disco of the di UN SAS 1 TB 7.2krpm formato 2.5 "price.
He nostro Server e a DELL POWEREDGE R720 (serial number: xxxxxxx).
Grazie.
Saluti,
Buongiorno,
Può acquistare disco it online a questo link:
Accessories.euro.Dell.com/.../Category.aspx
Saluti
-
DELL PowerEdge R730 (Gen 13) always 100% fan (16000 RPM +)
Hello
I have a brand new R730 DELL. Since the time I first started the box, the beginning of fans out to what I consider normal speed, halfway through start, then for as long as the box is enabled, the fans are strong and spinning to their maximum rate 100% or about 16000 RPM. There are 6 fans in this area.
I have updated the BIOS to the latest firmware 2.2.25, I also updated the firmware from LifeCycleController to the last 2.40.40.40.
Dell technician has been there twice to replace 1) all motherboard (motherboard) and the other 2) maps PCI riser (who had the button intrusion).
The server fans still spin 100%.
I did:
-the flea power drain
-the IPMI command to turn off cooling for PCIe
-remove all memory but 1 chip in A1 and deleted 8 SSDS.
Turning always to 100%.
When you look at the installation of the fan to the iDRAC, I can't even set a custom value because the beach is stuck at 100-100%.
There is no additional PCI or PCIe cards installed.
Does anyone have an idea what is happening here. It does not seem right that this fan run at 100% all the time.
Looking at the configuration of the system, the server was shipped with 2 processors Intel Xeon E5-2689 V4. These processors have additional thermal requirements and so RPM fans' will operate 100% as a trade off. Based on this information, the fans run according to the needs.
-
upgrade brain Server DELL PowerEdge T320 Service TAG: 50JJF62
Salve,
MI servono due per questa macchina brain.
Q.TA 2 x 2 TB near Line SAS 3Gbps
oppure
Q.TA 2 x 2 TB, near line SAS 6Gbps
Saluti
Riccardo
Buongiorno, di upgrade development cars required by it business service.
Questo forum if occupied della risoluzione di guasti per sistemi fuori co.
Todas
-
Dell PowerEdge R730 + ESXi 6 U2: licensing problem bought
Hello
I am trying to assign vSphere Standard licenses, I bought via Dell (and saved).
Whenever I try to license, I get an error message:
"The entered license key has no sufficient capacity for this entity.
Has anyone ever had this problem?
I have dual CPU servers (so I bought 4 licenses) that they are by CPU.
VmWare does not seem to understand my problem.
Kind regards
Hello
What model CPU do you have? https://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1019695
-
State "Unknown" to the storage controller on one of our servers, PowerEdge R730
Hello
I'm having a problem with one of our servers. I tried to add all our servers PRTG to monitor the State of health and the hard drives. On two of our three servers, it works absolutely perfect, on our third-party server, all the disks are red because 'the component status' is 'unknown '.
Then I checked this server iDRAC interface and noticed, that under the "storage->-> health and properties of physical disks" the status field contains a question mark for each hard drive. Under 'Storage-> controllers' fields status for 'Health and Properties' and 'Battery controller' it shows an exclamation mark.
On our other servers, all statuses are all green. Version of firmware and driver are exactly the same on all three servers. I don't know if it's a hardware problem or if it's just a setting error.
Any ideas?
Hello.
What version of OpenManage Server Administrator, OMSA do you use on a server? You are able to view the status of controller and physical drives in the BIOS of the controller, using Ctrl + R? What version of firmware BIOS, H730P and iDRAC?
-
Dell PowerEdge R730 Rack Server
Dear support team, I need urgent help here...
I have to have to Open Dell Management CD to install windows and I installed windows server 2012R2 without using the disk operating system that lead that now lack of drivers.
So my question now is how to update the missing drivers from the CD, avoiding reinstall OS again because I already have the full installer for my applications...
Waiting for your answer...
Kind regardsSolved by going to dell driver > chose my product and download and installed (Drivers-for-OS-Deployment_Application)
-
Addition hd a PowerEdge R310 Server
Buongiorno
Come da oggetto Kern UN PowerEdge R310 fuori co
avevo need di espandere memoria di archiviazione adding
altri 2 HD da 4 TB my sapere I wanted to sono gia in RAID sui due supplementari Slot
Inoltre avevo need di una urgent price by 2 di offerta da HD 4 to slot piu
Saluti
Cosimo Pasqua
Buongiorno,
Può utilizzare questo link by the price dei brain fees.
Accessories.euro.Dell.com/.../genselector.aspx
By how far the configurazione dei brain in RAID who can find the information on request
www.dell.com/.../Creating-virtual-disks
Marco
-
Dear Sir or Madam,
I bought the Poweredge R730 w / single E5 - 2640 V4 (10 ° C/20 t) with 750W 80 + PSU config Platinum and performing. Now, I want to add the GPU card for performance of extended treatment, for example. GTX1080 with 170W typical. I searched Dell Community and external forums and who are there should / could be a custom installation of GPU-based external power problem.
Those I need to ask: should I have to order the GPU installation Kit or any part to ensure that the custom configuration enters the work (optional 2 x GPU should be concerned). I have recognized that the installed GPU may be used only for processing task and not for display purpose.
Thank you for your kind assistance to the front.
Sincerely,
Wilairat bodivitZyxzenze,
A question you might encounter is that the specific GPU is not taken in charge and might not work. The list of GPUS supported the R730 is lower;
R730 GPU taken in charge to the RTS NVIDIA AMD Intel Phi NVIDIA K80 AMD S9150 Intel Phi 7120P NVIDIA M60 AMD S7150 Intel Phi 3120 P NVIDIA M40 AMD S7150x2 NVIDIA K40M AMD S/W9100 K1 GRID NVIDIA NVIDIA GRID K2
Now you know, the R730 can support two 300W, full length, double width or four 150W, width of a GPU. GPUS are installed on interfaces PCIe x 16 Gen3 available on Riser2 and the Riser3 GPU-optional. For the internal installation of two GPUS in the system, Riser3 GPU-optional must be present.
Also, it seems that the cables will be specific GPU as well.
Let me know if it helps.
-
Add g windows da datastore fees
Ciao, nel mio esxi4.1 ho creato delle macchine e windows linux ham come storage by I datastore he raid of locale.
POI, having sul server a disposizione altri 2 brain montati internamente e altri 2 storage di rete managed ip external montati como dall'host NFS, ho added ad una macchina windows un nuovo virtual hd, ho are lo storage only, poi nella windows 2008 nella gestione g NFS ho trovato the partition, formattata utilizzabile e nuova end that ok.
Ho SC has monte by following it firewall, anche questa virtuale che due since reti, per cui sono rimaste naturalmente attive macchine e disconnesse temporaneamente da internet, ma, of tenendo aperto vSphere client e visualizzando the procedure of al riavvio del firewall macchina windows 2008 con partition aggiuntiva ha presented it punto esclamativo e the error (rightly) che uno dei brain vmdk era non disponibile (nel riavvio mi ha smontato it external disco)... e infatti host poi mi Presenta lo storage not available.
He problema, vivid che mi sie e presented, e che da vSphere client selezionando macchina in questioned con he punto esclamativo mi ha definitely dell' error e poi... If e spenta..., e partiva più non, finchè not ho rimosso HD virtuale dalla macchina win.
Domanda e quindi questa: I having brain fees, sia interni che esterni e corretto add partizioni e vdisk adding storarli knew tali brain?
Perch, mi chiedo, United Nations external disco can disconnettere, UN disco interno can ad esempio rompere... quindi perch the windows deve andare in error, e spegnersi macchina partire non più?
In dettaglio, ho a raid da con 2 TB knew macchine e virtuali poi 2 hd interni da e 2 TB 2 esterni montati NFS da 2 TB cadauno.
I like a disposizione averli from brain locali dentro the windows, by cui come ho sempre fatto will it prima virtuale e da windows PE, my preoccupa questa cosa face andare in crash the macchine che mi is UN become a disco not available solo momentaneamente Reed...
p.s. gestisco con tutto vSphere client, I have solo brain NFS li monto da shell ham esxcfg-nas
Grazie
Ciao
Killed it would rigour di logica andrebbe bene.
My non tiene conto di cosa succede splits the NFS not e raggiungibile: non e possibile network the vm (manca disco boom of it) e essere esserci if nella VM (perched a nice non più disco).
UNA soluzione essere quella di utilizzare una could share da dentro the VM (in this case al più ti if disconnette share).
-
Network on the VMS problem guests on nested Hyper-V on ESXi 5.5
Nesting of virtualization is already complicated, now, I hope that my subject of this discussion is not too complicated.
Server: Dell PowerEdge R730 double E2640
- External hypervisor: ESXi 5.5.0u2 (Dell custom image, installed on the server), 4 (NIC0, NIC1 in use) network interface cards
- Management IP address 10.200.200.9/ subnet mask: 255.255.255.0 / Gateway: 10.200.200.1
- Inner hypervisor: Windows Server 2012 R2 Datacenter, using 2 network cards virtual x E1000E
- IP 10.200.200.10 (for BONES)
- IP 10.200.200.11 (for guest virtual machines)
Basically, I followed the instructions to create a new virtual machine with Virtual hardware version 10, edit the vmx file, allocate and reserve the 64 GB of RAM with 8 vCPU for Windows Server,
VHV. Enable = "TRUE".
Hypervisor.CPUID.v0 = "FALSE".
MCE. Enable = "TRUE".
At this point, everything works fine- I am able to install the Windows server 2012 R2 with Hyper-V feature. I also installed VMware Tools on this 2012 Windows Hyper-V, datacenter arrived at the field, ran iSCSI to connect to our NAS and restarted the hyper-V without problem on ESXi.
But when I try to install a new guest VM in Hyper-V, the network does not work properly.
I install a Windows Standard 2012 on Hyper-V (the inner hypervisor) without problem and the guest that OS Gets a 10.200.200.86 IP address (assigned by DHCP on the same subnet)
This guest operating system, I am able to ping it's computer Hyper-V host 1st layer (10.200.200.10 and 10.200.200.11) and 2nd ESXi host (10.200.200.9), but the impossibility of joining as a result of gateway (10.200.200.1).
And of course, I received an exclamation sign on the network icon in the taskbar of the 2012 Windows standard saying 'no internet connection '.
* I was always able to join this Windows 2012 Std comments to the domain.
No existingon the same subnet is an another Hyper-V on server physical hosting multiple virtual machines of comments including the controller of field and the DHCP servers, etc.
I tried using PCIe with the Dell Server NIC3 pass through, but it crashed the ESXi and gave me an IERR (CPU 1 error) error message on my screen front of server Dell
I ended up not using pass-through PCIe (although I really want to use if this solves my problem), because I learned that it can cause problems with other discussion threads Intel processors.
Also, does anyone have similar problems? What did you do to fix this? I have been stuck for days not being is not able to connect guest VM in internet...
My goals for this configuration are
(1) simplify my strategy of VM backup (backup only the Hyper-V 2012 to capture all the parameters of the virtual machine)
(2) maintain the real guest VMs on the NAS.
(3) use this new Hyper-V with another Hyper-V (on another old physical server, are not nested) to provide high availability
Andrew
You have activated the Promiscuous Mode on your ESXi host vSphere vSwitch? Have a look here: http://vblog.is/?p=94
- External hypervisor: ESXi 5.5.0u2 (Dell custom image, installed on the server), 4 (NIC0, NIC1 in use) network interface cards
-
Hello
First, I will describe my setup:
1 Management Server: Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 drive HARD 300 GB SAS 15 K (RAID 5) and 256 GB of RAM
2 hosts VDI server: Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 drive HARD 300 GB SAS 15 K (RAID 5) + 1 SSD 200 GB, 256 GB of RAM, 2 K1 grid cards
1 unit number logic on a Dell Equallogic PS6110X (750 GB) where I put the masters.
1 switch Dell N4032F (10 GB)
All the server has 4 10 GB ports configured with NPAR (so, I have virtual network card of 6 x 10 GB for storage and 6 virtual network adapter for the network of the VM) and 2-port 1 GB for the management.
My master: Windows 7 SP1 x 86 optimized with 24 GB HDD Thin-Provisionned (2 vCPU 2 GB of RAM, 3 VMXNET network Card). There is no application has added to this master.
I can't ask the Microsoft VMXNET 3 fix because it is said that this patch is not applicable.
I have no VSAN because that only 2 VDI hosts, so I set up my stock for each guest with local storage for the linked clones and SSD local for the replica.
When I run the provisioning of the office pool (17 VM):
The clone of the replica (Equallogic == > local SSD) aura 2'30 "... It's good for me (113 MB / s... the Equallogic is also used for another another LUN storage server)
But the rest of the entire operation completes the provisioning will take 40'.
More than 50% of carrots is around 100% of the CPU on the host.
I tried to change my (9 disc hard + 1 spare) RAID5 to RAID10 (10 HDD). It will take 50'.
And, when all of the operations are completed. I have 2 or 3 VM with the message: Agent unreachable and 1 or 2 crashes on the provisioning.
One recompose your desktop one VM will take about 1'30.
My question: it is normal that commissioning will take so much time?
And another question: when I'm connected to a virtual desktop computer with customer Horizon during a pool commissioning, the freezing of the VM or I can't just plug. Although I Office ready. And sometimes, vCenter client will freeze to a large number of seconds during deployment
Have someone idea?
PS: Sorry for my approximate English ;-)
Solution: I replaced the lsi_mr3 of storage vmware with the driver megaraid_perc9 driver.
Thanks to ddewire for his help.
-
Hosts disconnect during VMotion
Hi guys, faced with a difficult problem with a cluster and could use some comments: we had issues where one of the hosts (random) enters a disconnected state. If you let it rest enough long IT will return itself. Restart the vcenter services seems to accelerate the process too. Last night I went to put hosts in maintenance mode (to apply the latest patches) and all sorts of bad things that happened. Got to the point where 2 guests are cranked out. So bad a situation that one of the hosts could not return in the cluster, and we had to stop the machines and save them again on the hosts in the cluster. (Pleasure at 03:00). VMware has been a bit confused last night with what was going on so I have to re - engage the next week. Any help / ideas would be very appreciated.
Here is the material / details.
-Execution 5.5 Build 2302651 (ISO specific Dell)
-3 x Dell PowerEdge R730 [boot from Flash] (firmware completely up to date)
-1 x Dell Powervault MD3420 12 GB SAS (two controllers) (current firmware) connectivity
-There is a Dell PowerEdge R730XD directly connected to the MD3420 running Windows 2012R2 / Veeam 8.0 Update 1 for backups
-We are not sure if Veeam could be the cause for it. Trying to get involved them. At the moment we have completely disabled Veeam.
-A putty session to one of the disconnected hosts who had locked up for a restart of management agent came back as if by magic when a veeam replication job has been cancelled (a replicate a computer since the backup repository so I have no idea why that would be important)
-Currently have DRS automation and control applications disabled to mitigate risk
-Start to move workloads to another cluster to reduce the risk
Well, after a lot of torture, here is the solution:
-Drivers that Dell will ship with 5.5U2 latest ESX media are not good. You must use the latest VMWARE drivers for DIS3 12 GB host bus adapters.
-After the pilot on 2 hosts rotation, I tried vmotion and could not reproduce the problem.
-For good measure we have updated the MD3420 to 8.20 firmware which was mainly new features
-VMWARE update latest version
After this experience, we will make some changes to our deployment strategy in order to eliminate a problem like this before the cluster into production if all goes well. We have made several tests of vmotion and storage vmotion before going to the first time, but us did not grow it is quite difficult. Automated DRS kicks and tried once to spend a lot of things at the same time, it is when we started to see these questions. If we had put a lot of pressure on the cluster and observed the vmkernel logs we have observed the error messages.
Couple all of this to try to migrate to Veeam, it makes it difficult to isolate. Once Veeam was arrested and the problems continue that it makes it a lot easier to focus our efforts.
I hope that someone else that this encounter with the LSI solution (HP, Dell, IBM) will benefit from this thread.
Maybe you are looking for
-
How to prevent pop-up windows? Always get when I click on a link and it becomes frustrating. Help, please. Thank you.
-
When Skype support the Tegra2 device? Please have a public calendar
Hello team Skype, There are so many Tegra2 android devices, but no one can use Skype video call... Please have a Tegra2 support calendar and do not force the end user to use gtalk video call... If can Google talk, Skype should can be...
-
Omni 10 5601tw: upgrade from 32 GB to 64 GB internal storage
I can move my omni10 5601tw internal storage to 64 GB if yes then how and I had pay for it
-
Qosmio G30-161 PQG30E: HD-DVD, it does not work
HI -. I have the specifications of the models below, and when I try to use a HD-DVD it does not work. I followed another thread re HD DVD but it seemed to apply only to Windows Vista, but as you can see below I just Windows XP but apparently the HD r
-
Pavillion DV5 starts to load XP, then restarts in a loop
I withdrew my Pavillion DV5 - 1251NR to act as office and archive hard drive for a long time when the battery is flat and it has stopped working without charger. Startup message side that it worked fine but now it just won't start. Takes me to the ba