Surround sound on HP Envy 23-d284

Similar Questions

• No. 5.1 surround sound HDMI

  Problem - I don't get that ' "two-channel stereo sound during playback of a DVD (with Dolby) on my computer.  The computer is connected to an audio receiver that is set up for a surround sound.  Audio and video signals are transmitted from the PC via the HDMI 8.Lorsque on the video/tuner card.

  Computer - Compaq SR7510F

  Vidéo/Tuner - ATI All in Wonder HD

  Connected to Onkyo TX-SR604 through a video/Tuner card HDMI cable.  The Onkyo receiver is connected for 5.1 surround sound speakers.  Video signals are transmitted via the receiver to a flat screen monitor

  Sound - onboard Realtek

  According to the specifications for the SR5710F it is supposed to support its 6 speakers.  However the HDMI audio driver only allows me to select "stereo".  It is a select "surround" box, but the box is "grayed out".

  When I play the same DVD using a stand-alone DVD by Phillips drive, connected to the Onkyo receiver with the same HDMI cable, I get Dolby on the receiver.  This means that it is not a problem with the receiver, it must have something to do with 1) onboard Realtek sound driver 2) HDMI, or 3) the HDMI connection on the video/tuner card.

  I checked on the Web from Realtek site and they list a newer driver for Vista (32 bit), but when I use the Device Manager to update the driver, it is said that it is the most recent.  I don't know that the driver is the problem, so I'm hesitant to try for the heck of it.

  I tried the latest drivers Catalyst 9.1 for ATI All in Wonder card, but that didn't help either.

  Any idea?

  Telefunken,

  Thanks for the suggestion.  It worked!  There is absolutely no sense to me, nor it does not seem logical to select SPDIF, but I can't argue with success.

  I didn't need to buy Arcsoft Media Theater.  I was able to select SPDIF with ATI Catalyst and Microsofts Media Center.  I could get Dolby

  In my current setup, I updated ATI Catalyst 9.3 version graphics card and loaded the audio driver Realtek HDMI ATI R2.18.  Also in the BIOS, I put the Audio on 'Auto '.  I chose the HDMI, not the Realtek driver driver in Control Panel.  I chose Dolby and DTS bothy under the driver settings.

  Now I think I'll enjoy a Quantum of Solace from this nagging problem is resolved.

• Pavilion 15-n267ea: how to set up 5.1 surround sound on my laptop through 3.5 mm Jack?

  Hello
  
  I was wondering if anyone of you guys/girls know how to set up surround sound 5.1 to 3.5 mm jack? I have a HP Pavilion n267ea 15 notebook with 10 64-bit Windows installed currently. My HARD drive failed last year so I had to install a new copy of windows (without the HP software) because I never made a backup.
  
  If there is a way, I would be grateful if you could let me know in a few steps. I have a surround system hooked up with an input audio jack of 3.5 mm. Any help would be appreciated.
  
  Concerning

  Hello @Androider86,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the noise and wanted to help you!

  From my understanding, to reach 5.1 output, you need the outputs 3 analog stereo, or you will have to do it via HDMI.  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• Connection to (Qosmio G20) Surround sound

  I'm trying to connect my Qosmio G20 to my sysytem via an amp external surround sound.

  As far as I know I have everything connected correctly, but I'm only obtaining from my front left speakers and rear no where elsewhere.

  I checked the speakers and all the settings I can think on the laptop, is there something that I don't have to send the signal to all the speakers?

  Any help is greatly appreciated.

  Thank you very much

  Hello

  Check it please this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3665&messageID=12229#12229 topic. I believe that display Quad will be useful for you.

  Good luck!

• Just not upgraded for Windows 10, 7.1 Surround Sound no more functions

  I use a Logitech G633 helmet, which is compatible with a 7.1 surround sound. Before moving to Windows 10, one worked perfectly well with Skype and my sound quality surround sound was crystal clear. After the upgrade to Windows 10, Skype does not use surround sound and instead, I'm treated with bad stereo audio.

  Everything else on my computer always uses one surround sound, except Skype. This problem is only with Skype.

  I tried to reinstall the Skype and Logitech software, with no result. I am at a loss for what to do and if I can't find a solution I'll down(up?) level to Windows 7.

  I already tried to install a version of LGS that dates back all the way to March 2015, and it did not fix the problem. I was already using the latest software version when I was running Windows 7 and Skype worked fine with one surround sound with Win7.

• a6233. SC - HD surround sound?

  Hi, I bought the a6233.sc about 7 years ago and did not have a reason to replace it since then. I added more RAM and a bunch of external hard drives.

  Now, I'm looking for buy a new receiver surround sound capable of HDMI and HD audio and my PC has become the center of the media associated with over the years, I want to make sure that most of the things she would always keep upward. This read on sites Web HP/realtek/Nvidia I initially thought that it would be no problem: sound card is ALC888S and although there no passage in the functions of HD formats, there no record of 192 kHz/24-bit and I have a software that decodes the LPCM sound. But now I just read an article that made me doubt if the sound card is integrated into the exit HDMI of Nvidia 8600 GT.

  Another question, is my PC has more muscle to handle a Blu - Ray player?

  Any help would be much appreciated I could prioritize significantly differently if things are not as I hope.

  Peter

  I understand that you want to know about the sound card and how it works with the 8600 GT video card HDMI output.

  I am not entirely sure about the line of products from Nvidia, but that's how it works on AMD cards.  The video card has a dedicated sound chip for HDMI audio output, which is separated from the dedicated sound system map.  It has its own drivers and resources in Windows.  It is also separately listed in Device Manager in the sound category.  I think it would be the same for Nvidia products.

  Do a ctrl + f search on this FAQ blu indicates the card 8600 is capable of playing blu - ray.  According to the specifications, the system came with 32 bit Windows Vista that would make the RAM max allowed 4 GB (3, 2-3, 5 GB usable).  If there is a large RAM available, it would seem that this would be sufficient.  The system came with a 2.4 GHz quad core processor which should be wide enough for blu - ray playback.  However, none of this is a guarantee.  Each blu - ray player comes with different reading software.  I recommend to look at the system requirements of the software (which should be listed) and compare that to what your system has.  As long as you are within the reading software, it should be fine.

• Mac Mini, 2016, 5.1not Surround sound work

  Hello

  I'm new to mac. I have so far had to import my library ituns with sides of my pc and I have problems major can´t import a CD so I'm not in love with the new system. Also I just found out that the mac does not work with 5.1 all the time! I have configured as such, and when I do a test the rear speakers work. However, when I look at something or have music on there is no sound from the rear speaker I checked on my blueray and they work so no problem there.

  Any ideas.

  This CD you are trying to import into iTunes?

  And why you can not import?

  Computer music are for most stereo and not 5.1 surround sound.

• Audio Usb Hub 3 x Usb 1 x Lan on 5.1 Surround Sound card?

  Hello

  I want to buy a Usb Audio Usb Hub 3 1 x Lan onboard x 5.1 Surround sound external device, but my question is: can I use 2 outputs to give a different signal?

  I use Traktor DJ Studio and I want to use an output for the player on the left and an output for the player from right, is - it possible to do this whit a Usb Audio Usb Hub 3 1 x Lan onboard x 5.1 Surround sound divece?

  Hello

  Is there no possibility to check how it works before buy you? You will be very happy if someone here has already tested. ;)

• IPAD playing on my Surround sound system

  Hello, I currently my IPAD 4 (Retina Display with lightning connector) connected to my audio system surround sound home. I ran a wire to an analog output from the transformer to the IPAD headphones Jack and it seems to play fine through my speakers. I also have the IPAD sitting on a Belkin dock with no entry to the outer (this is why I use the headphone jack). I have to manually change the titles on Itunes.

  As I continue to enjoy the music through my system, I'd do it to make it more effective. I wish I could change the track using a remote control (my universal remote does not recognize the IPAD). I tried a few external docks which have their own speakers (as well as a Bose Sound Dock Altec); an auxiliary input and a remote control and they do not seem to work with my system and I don't know why. Music will not play when I connect the phone directly on the entry on these docks - nor the remote that accompanies these docks work.

  Can anyone recommend a solution for me or a product "universal docking station" my IPAD can sit with an auxiliary input and a remote that works with my surround sound system? Or I'm just something wrong?

  Your ideas and the entrance is appreciated by words.

  Thank you.

  Take a look at this.

  http://www.Amazon.com/Satechi-mediaremote-Bluetooth-multi-media-control/DP/B0082 4948U/ref = sr_1_1? ie = UTF8 & qid = 1391729056 &...

• surround sound in iTunes

  On my sound Windows 10 PC surround works in Windows Media Player, but not in iTunes. How can I change the config in iTunes?

  I had exactly the same problem and based on iTunes for a solution and after really engage with them, they are back and after testing what they suggested I have now answer that works.  As with all things all he needed was to know what box and the important thing to note is the solution lies not in iTunes, but in a simple setting on your Windows 10 sound settings.

  So the solution is the following:

  First of all, quit iTunes (if open), then go to control panel - sounds - select your speakers (probably failed you device) and then click Properties.  Then click on the enhancements tab and simply check the Speaker Fill box - click on apply and can test to see if you work by using the Preview button.  Surround sound on all 5.1 speakers should play.

  If so the next open iTunes and play your favorite song and it should play in a 5.1 surround sound.

  Hope it works for you - it did for me and is a solution supported by iTunes Support.

  If it does not you spread the word about this solution.

  PS I think this can also solve / resolve 5.1 surround for iMovie and other problems of his fellows.

  Enjoy

  Mike H

• No sound on HP envy 17-joo7TX

  Hello

  I have a new HP envy as shown above (sound on HP envy 17-joo7TX) and have no sound coming from the speakers, even if the speaker on the desktop symbol shows that the sound is produced.

  Help!

  Found the answer - I Samsung monitor attached via a cable HDMI - no speakers on the monitor - the sound was trying to come from the monitor - just changed PC and all solved!

• A surround sound to my Satellite A300-S6872

  Greetings!

  I want to use my computer to send a sound signal 5.1 surround to my Onkyo receiver. I have a headset jack SPDIF port size, which I think allows a surround output.

  In addition, when I tested my Realtek digital output device, the green lights will turn on but I have no sound (which I think ' may be the result of bad cables I'm using).

  What do need me and how do I make my exit from the computer a surround sound?

  Thank you!

  Hello

  If you are sure that your laptop supports S/PDIF (digital audio output) to 100%, then you can use the cable like this:
  http://APS2.toshiba-tro.de/KB0/TSB5400YZ0005R01.htm

  If you plugged the A300 cable, then you will need to choose the right output of the Panel-> sound

• 15 - r218nv: my laptop HP needs to have the software 7.1 surround sound

  Hi all

  So, recently, I have been checking on a headset which supported a 7.1 surround sound, and I found a few I have in mind. I searched on the internet and at one point, I found an article under the helmet that says: Please make sure that your computer supports a 7.1 surround sound. Which made me think if I need a software pre-installed on my computer, or were which means that the description under the helmet download their custom software. Just because I don't want to spend money on the specs of my computer cannot run, so I came here to write this question I know not if I'm going to spend my money on something that my computer will not process.

  Thank you if you read this and have answered my question.

  Pandofla wrote:
  

  Hi all

  So, recently, I have been checking on a headset which supported a 7.1 surround sound, and I found a few I have in mind. I searched on the internet and at one point, I found an article under the helmet that says: Please make sure that your computer supports a 7.1 surround sound. Which made me think if I need a software pre-installed on my computer, or were which means that the description under the helmet download their custom software. Just because I don't want to spend money on the specs of my computer cannot run, so I came here to write this question I know not if I'm going to spend my money on something that my computer will not process.

  Thank you if you read this and have answered my question.

  What you're watching isn't really true 7.1 headphones it simulates, it not there no such thing. If you want 7.1 speaker setup real physical and a card sound Sound Blaster FX that can drive these speaker setup. So don't believe that stuff.

• No surround sound on Apple TV 4 gen?

  I recently upgraded to Apple TV fourth generation and lost my sound surround.

  My old Apple TV (3rd generation) has been connected via optical toslink to my receiver Onkyo and everything worked well. A 5.1 surround sound.

  Now, I have installed the new Apple TV 4, who unfortunately doesn't support optical output. Instead I connected the th output to my Onkyo HDMI receiver. Whenever I get sound, but only 3.1 (front left, right and Center) but no sound on my surround sound speakers. If I unplug the Apple TV and plug in my DVD player the same HDMI input on the receiver I hear great 5.1 surround. If Im guessing all the settings of the receiver is very well. It's just the apple TV that does not work.

  Why is this? Apple TV supports 5.1 sound more? Is this a known problem and how can it be solved.

  Try adjusting the audio settings Dolby on the ATV4.  Given that my receiver has no HDMI inputs, I went with an optical splitter HDMI and have 5.1.

• 4th generation Apple tv remote keeps switching HDMI 2 if I have my surround sound Samsung anynet on which uses when the samsung TV is turned on. Currently I have away the skin until I found what I want to watch.

  Current configuration is a Samsung TV with a Samsung blu - ray surround sound.  When both are on they use anynet to communicate. Now with the new apple TV 4, any click on the apple TV remote will send my TV HDMI 2 (where the entourage of blu - ray is connected). How can I stop this? The apple TV is HDMI 3. The dressing must be on HDMI 2 which is also ARC (Audio return channel)

  Try to go in the settings of TV4 of Apple and the deactivation of the ability to control your receiver and your TV. This should disable HDMI CEC which resembles its conflict with Anynet.