Svchost.exe - Application error... Help please

Svchost.exe - Application error the instruction at "0x7c923845" referenced memory at "0x00000000".

Initially I thought that I had a virus because every time that I see this pop up on my computer it crashes and I have to restart manually. This often happens when I'm on the web. How can I fix?

Svchost.exe is needed to start the required DLLs for Windows Services.

Follow these steps and post, that things have "disabled" in the title of the status column:

1. click on start

2. click on run

3. type services.msc

Hope this helps

Post back if necessary

____________________

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • Svchost.exe - application error... help

    I receive the following error message at startup, when I connect.  If I complete the program my computer going to be inadmissible.

    Svchost.exe - application error.  The exception of integer division by zero. (0 x 0000094) occurred in the application at location 0x001a3fe2.

    Click OK to finish the program

    Click on Cancel to debug the program

    Nothing comes up on my anti-virus.  Any help would be appreciated.

    Hello Scott, I did some research on this and found this site, don't know if they fixed the problem is related to your but you can see if the process will help. I found this on PC * Web site:

    http://www.pchell.com/support/svchosterror.shtml

    I'll do some looking and see what I can find.

    It is permanently associated with a start-up program, I would like to go in safe mode after you start in Windows, go to start then run and type msconfig. Once in the config window go to the Startup tab and uncheck all the boxes that are not essential to the system. You do not uncheck anti-virus or your spyware / malware removal software. If the system starts fine then go back to msconfig and start checking one box at a time until you get the error again. The last program box checked is the culprit and should be removed and put back in place.

    Hope this helps, Jim

  • Svchost.exe application error, host process for Windows Services has stopped working

    Original title: Svchost.exe application error [windows loses focus]

    Every two minutes, windows 7 loses focus on the current window and I went in my event logs and found hundreds of errors of svchost.exe. Here's one of them:

    Name of the failing application: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
    The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc00000fd
    Offset: 0x0000000000018e3d
    ID of the process failed: 0x81c
    Start time of application vulnerabilities: 0x01cd7970b1953fa0
    The failing application path: C:\Windows\system32\svchost.exe
    The failed module path: C:\Windows\SYSTEM32\ntdll.dll
    Report ID: efb97cea-e563-11e1-a232-002655497401
    The error message I receive after automatic power off repairs in the center of the Action is "host process for Windows Services has stopped working" and the process that opens after the loss of focus is Werfault.exe.
    Thank you for your time.

    Hello

    1. when exactly do you get this error message?

    2 have you made changes on the computer before this problem?

    Method 1:

    Step 1:

    Try to start your computer in safe mode and check.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2:

    If the problem does not occur in safe mode, perform the clean boot. Read the following article.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

    Method 2:

    Try to scan your computer with the Microsoft Safety Scanner and check.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
    Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

    Method 3:

    You try to perform the SFC (System File Checker) scan on your computer and check. Read the following article.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    It will be useful.

  • Svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory cannot be: "read"

    Hi, I get the error message after my system boots - svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory could not be "read".

    And then after a few minutes it stops and restarts.
    I'm also not able to use the mouse.
    I need help with this problem
    Thank you and best regards

    Hi GeorgeMotaung,

    ·         Did you do changes on the computer before the show?

    ·         Are you able to boot to the desktop?

    Follow these methods.

    Method 1: Start your computer in last known good configuration.

    How to start your computer by using last good known Windows XP Configuration

    http://support.Microsoft.com/kb/307852

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start and then click Run.

    (b) type msconfig and click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

  • Svchost.exe application error the instruction at "0x001a6f95".

    Svchost.exe application error the instruction at "0x001a6f95" referenced memory at "0x000000c".

    The memory could not be "read".
    Safari.exe - application error
    the instruction at "0x00276f95" referenced memory at "0x000000c". the memory could not be "read".

    Hello

    · When you receive this error message?

    · What is the number and the model of the computer?

    · What is the service pack installed?

    · Do you remember any changes made on the computer before the show?

    · You have to install automatic updates on the computer?

    Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

    NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

    See: you receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box: http://support.microsoft.com/kb/927385

  • Svchost.exe - application error the instruction at "0x001a61ae" referenced memory at "0x00000000".

    How to fix the svchost.exe application error

    the instruction at "0x001a61ae" referenced memory at "0x00000000".

    Hi KarenBlank,

    · When you receive this error message?

    · It is when you work with a program or a particular application?

    · Or is it during the installation of update?

    · What is the service pack installed on the computer?

    · What is the number and the model of the computer?

    · Do you remember all the recent changes on the computer before the show?

    You can check the link below: you receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box: http://support.microsoft.com/kb/927385

    If any malware or virus detected on the computer activity, run also, check and online virus scan. You can run the scan for viruses online from the link below: http://onecare.live.com/site/en-us/default.htm

  • Svchost.exe Application error - education @ 0x7c923845 referenced memory @ 0x00000000 could not be "read".

    error message - Svchost.exe Application error the instruction at 0x7c923845 referenced memory at 0x00000000 the memory could not be 'read' there are 2 choicesclick Cancel to complete that freezes the whole system must make a start/stop hard ouCliquez Cancel to debug and still freezes system. I noticed that I can move the notification almost window off the screen from the road and still be able to use the system, as long as I do not click an option in the error message window.

    I ran M/S FiX IT, M/S, Malware, Avg free antivirus essentials, Oldtimer, Iobit and nothing found something: of course these have not been loaded on the system at any given time. I'vd sought a malware, viruses, spyware, what is causing this and nothing

    How can I get rid of this? A malfunction of the malware/Adware/Virus/system or what it is?

    Hi stallman0419,

    When exactly do you get this error message?

    You can follow the steps mentioned in the articles below which deals with a similar question

    You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box

    http://support.Microsoft.com/kb/927385

    You receive an access violation error and the system may appear to hang when you try to install an update from Windows Update or Microsoft Update

    http://support.Microsoft.com/kb/927891

    Thanks and greetings
    Ajay K
    Microsoft Answers Support Engineer
    ---------------------------------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Svchost.exe - application error - the instruction at 0x7c919af2 referenced memory at 0 x 00000010, that memory could not be written

    Windows XP Professional and service pack 3 to have also internet exploror 8 install_ at startup I get this error message - the instruction at 0x7c919af2 referenced memory at 0x00000010 the memory could not be written

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/svchostexe-application-error-the-instruction-at/700e7092-7359-E011-8dfc-68b599b31bf5

    http://www.GeeksToGo.com/forum/topic/231828-0x7-errors/

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-message-on-boot-up-svchostexe-application/a1d7a2c2-2a9b-4145-A149-04ac389c0ffa

    Click on these links for possible solutions to your problem.

    Also, check out the related discussions, below your question.

  • Error message at startup! Svchost.exe - Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". The memory could not be "written".

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    by http://www.bleepingcomputer.com/forums/topic261076.html

    1 - Go to control panel

    2. Administrative Tools

    3 - services

    4-go to the following Service: (Windows Driver Foundation - User - mode Driver Framework) right click, then choose Properties---> in the startup type select disabled.

    5. restart the system.

    It fixed for me.

  • At startup I get this error Message = "error in svchost.exe - application instruction to memory 0x7c919af2 who 0x00000010.the memory could not be written."

    Windows XP

    At startup I get this error Message =

    Svchost.exe - application error the instruction at 0x7c919af2 memory 0x00000010.the memory that could not be written.

    What should I do about it?

    You don't need to "try" things - you need to "do" things:

    It seems that the last update for Windows Media Player may contribute to this problem when the system has the Windows Driver Foundation Service active and running.

    Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you should disable the WDF Service.

    Click Start, run and enter in the box:

    services.msc

    Click OK to launch the Services Applet

    Locate the Windows Driver Foundation - User-mode Driver Framework Service, right-click right the Service, select properties and choose disabled and OK your way out of the Services Applet to save the changes.

    Note that you will not be able to 'Stop' Service first, but it's OK.

    Restart your system (the WDF service is now disabled) and check your failure condition now.

  • error message: scvhost.exe - Application error: the exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812afb.

    I closed my computer and he says there are a few updates that should be installed in front of him close. I let it run and my computer off. Now, when I turn it back on I get the following error message: scvhost.exe - Application error: the exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812afb. And now I can't get my computer to connect to a wired or wireless internet connection, and it seems to be running slow. Any ideas what it is or how to fix it?

    Also, I tried to restore my computer to a few days ago and running my software virus and nothing is changed.

    Hello

    Have updates you installed? You can check this in the history of the update?

    Step 1: To check the update history, follow these steps:

    1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
    2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.

    Step 2: Refer the article that could help you solve this problem.

    You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box
    http://support.Microsoft.com/kb/927385

  • Iexplore.exe - Application error. Help!

    This is one of those things that can drive you crazy.  Everything was fine, but recently trying to use the BBC iplayer.  I was prompted to install Flash Player. That was a few days ago and it works perfectly. Now, when I try to start the download I get a box with the following message.

    Iexplore.exe - Application error

    The installation of "0 x 10420068" referenced memory at "0 x 10420068.  The memory could not be "written".

    Can anyone help. Please

    Try the Offline Installer ActiveX http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe; Save to disk, close all browser windows, and then run the downloaded installer.

  • Can someone tell me please how to fix "Adobe QT 32 Server.exe - Application Error"

    Hello world

    I am trying to edit a video in PS CP and my machine freezes constantly at any time and this message appears on the screen:-

    "Adobe QT32 Server.exe - Application error.

    The statement in memory referenced FAO FAO 0x0000000000D53 0x0000000000D53. "The required data was not placed in memory due to an error of e state / of 0x000000e.

    Thanks in advance!

    Check for help > updates.

    Check the version in use of the help > about Photoshop.

    ~ Assani

  • Restore7.exe application error

    So, when I try to boot my windows, an error box will appear, who says:

    "Restore7.exe - Application error. The instruction at 0 x 77892591 referenced memory at 0 x 00008084. The memory could not be read. »

    When you click OK, the computer starts and get stuck on this same page. I can't go to HP recovery by pressing F11. Recovery CD no longer works. Operating system is Windows Vista Home Premium

    can someone help me please. This problem can be solved by buying new hard drive?

    There is the info from my computer. :

    http://support.HP.com/us-en/document/c01409678

    How are recovery disks does not work? If you insert the first disc into the optical drive, press any key shortly after turing on your computer, you should start the recovery menu so that you can fully recover your computer.

    In addition, this could have something to do with Windows Product Activation? If you have added the internal devices, remove them and make sure you unplug all USB devices. Just the mouse, keyboard and display connected when you attmpt to a recovery.

  • On startup, I get the following error: spoolsv.exe - Application error

    On startup, I get the following error:
    Spoolsv.exe - Application error
    The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

    Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

    Bill

    Hello DragonBill,

    Thank you for visiting the website of Microsoft Windows Vista Community.

    Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

    To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

    1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

    2. in the Services management console, find the Spooler service, right-click on it and select stop.

    3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

    4. delete all the . SHD and SPL files in this folder.

    5. then open the TMP folder and delete all the old, unused files in this folder.

    6. Finally, restart the spooler from the Services management console service.

    Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

    If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

    It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

    Let us know if these steps solve your problem.  I hope the information is useful.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • 5530th envy: flipping pages expire

    Hi, I would like to know if the flipping pages expire. Thank you.

  • can I switch from xp to windows 8

    I'm currently under Microsoft Windows XP Service Pack 2 and as you know support has ended. I want windows 8 (because you can update to windows 8.1 free), but is it possible? Or should I upgrade to vista or windows 7 instead. Please any OS than xp. An

  • I installed KB917607 and programs have dissappeared

    I installed KB917607 on my Vista 32 bit and now all programs on my D: drive (partition, I believe, but not sure) have dissappeared, all my shortcuts does not find the address they point. Basically, it shows an empty folder where there should be at le

  • Cannot synchronize rca mc4002 to wmp.

    I can't wmp to recognize my device. Even when I plug the and choose to synchronize, it does not work. Windows says its compatible, I have installed the cd and reinstalled. My computer lists under 'My Computer' it shows all of the files in the folder.

  • Can I collect links lost after the unexpected withdrawal of the computer?

    Can I recover lost when links the system their removed without reason?  I had several links opens when the system (Dell Vostro - Vista), no reason, just be deleted links all open docs.  It is not stopped, but I looked so helpless all I was working on