Svchost.exe application error the instruction at "0x001a6f95".
Svchost.exe application error the instruction at "0x001a6f95" referenced memory at "0x000000c".
Hello
· When you receive this error message?
· What is the number and the model of the computer?
· What is the service pack installed?
· Do you remember any changes made on the computer before the show?
· You have to install automatic updates on the computer?
Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx
NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)
See: you receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box: http://support.microsoft.com/kb/927385
Tags: Windows
Similar Questions
-
How to fix the svchost.exe application error
the instruction at "0x001a61ae" referenced memory at "0x00000000".
Hi KarenBlank,
· When you receive this error message?
· It is when you work with a program or a particular application?
· Or is it during the installation of update?
· What is the service pack installed on the computer?
· What is the number and the model of the computer?
· Do you remember all the recent changes on the computer before the show?
You can check the link below: you receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box: http://support.microsoft.com/kb/927385
If any malware or virus detected on the computer activity, run also, check and online virus scan. You can run the scan for viruses online from the link below: http://onecare.live.com/site/en-us/default.htm
-
Windows XP Professional and service pack 3 to have also internet exploror 8 install_ at startup I get this error message - the instruction at 0x7c919af2 referenced memory at 0x00000010 the memory could not be written
http://www.GeeksToGo.com/forum/topic/231828-0x7-errors/
Click on these links for possible solutions to your problem.
Also, check out the related discussions, below your question.
-
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
by http://www.bleepingcomputer.com/forums/topic261076.html
1 - Go to control panel
2. Administrative Tools
3 - services
4-go to the following Service: (Windows Driver Foundation - User - mode Driver Framework) right click, then choose Properties---> in the startup type select disabled.
5. restart the system.
It fixed for me.
-
I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.
Hi stickman397,
This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:
http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533
Kind regards
Imran M
Microsoft technical support
-
I am running Mirosoft Windows XP Professional Version 2002 Service Pack 2
Before that, I really want to customize my windows and then I search in google "how to customize windows xp visual styles. After that, I follow the 7 steps how to customize. This is the link I will:http://www.WikiHow.com/customize-Windows-XP-visual-stylesThen, after I followed the steps, it asks me to install this: Neowin patch. When I installed it, it says that my OS is not original, but I just reinstalled the last time.Are the cause of the problems of the patch that I installed it in the first place?Is it related with my OS?How to solve this problem?URGENT!Hello
Thank you to contact Microsoft Community and we will be happy to help you with your concern.
According to the description, it looks like you are facing a problem with the Windows XP operating system.
It would be great if you could answer these questions to help you further.
1. When you receive this error message, Explorer.exe Application error the instruction at "0x5ad8c78d" referenced memory at "0x082c9c7". The memory can be 'read '?
2 is the issue limited only to Neowin patch installation?
There could be a conflict of memory with a driver or due to the bad memory or memory.
I recommend you to check with the activation status of Windows XP.
a. Click Start.
b. click on all programs, then accessories.
c. click System Tools.
d. click on activate Windows.
Windows XP Visual Styles, see the steps in the following Microsoft article.
http://msdn.Microsoft.com/en-us/library/aa289524 (v = vs. 71) .aspx
http://msdn.Microsoft.com/en-us/library/5d1acks5.aspx
Keep us informed on the status of the issue.
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
Original title: I get this weird error when I opened the Sims 2. Can someone help me?
When I opened the Sims 2, I get this error:
Application popup: Sims2.exe - Application error: the instruction at "0x6678e86b" referenced memory at "0x011a3000". The memory could not be "read".Click OK to terminate the program
Click on CANCEL to debug the programFor more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I have no idea what this means or what to do. Help, please!
DavidThanks for the info, it did not work, but uninstalling and reinstalling have. Thank you very much for your help!
-
Message MSVidCtl broadcast system receiver: ehRecvr.exe - Application error the instruction at "0x53801d4f" referenced memory at "0x00000000". The memory could not be "read". This error will not go away and I can not disable or delete the file. How can I stop it?
Hi SteveGHowe,-Remember to make changes to your computer after that this problem started to happen?Try to disable and re-enable the Media Center service and check:a. Click Start. Click run.b. type: services.msc and press ENTER.c. find Service Media Center Receiver.d. right-click on the service and click on stop.e. restart the computer and follow the same steps of 'a' by 'c '.f. now right-click on the service and click Start.Also, try the steps listed in the following link: -
Sometimes my computer will display a "BTStackServer.exe - Application error' window that reads:"the instruction at 0x0054eb27 referenced memory at 0x000001ef. The memory could not be read. When this error POPs, within seconds the computer just turned off completely and I have to turn it back on. As a first step, it rarely happened, but now it will be pop up and stop a little less than 5 minutes to restart the computer. I have a Lenovo x 201 running Windows 7 PRO, and two sticks of 4 G of ram. I tried reversing the two RAM sticks from one location to the other, but that has no effect. Would it still a problem with the RAM sticks? I have the latest version of Norton Security and it shows no virus. If anyone has any ideas, what could be the cause of this it would be appreciated.
Hello Kevin,
Thanks for the reply.
I'm sorry for the late reply.
I appreciate your time.
Before reinstalling Windows, I suggest you run the system file checker (SFC) and see if it helps.
Reference:
Use the System File Checker tool to repair missing or corrupted system files
https://support.Microsoft.com/en-us/KB/929833System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.
Please keep us updated.
Thank you
-
I have a computer running Windows XP (sp 3) and received the above error message. When I first start the computer, I got the following error message "Generic Host process for Win32 has encountered a problem and needs to close." When I select the 'debug' option, I get the SVCHOST. EXE error message. I tried to restore to a previous point, which did not work. I ran Malwarebytes and Spybot, both find elements but it has not fixed the problem.
Once the error is generic host comes up, I can't run any programs loaded on the hard drive.
Download and Save Malwarebytes Anti-malware (MBAM). Click on the button download free version.
Download and Save TDSSKiller . Please read the instructions on how to make it work on this page, too.Boot the system using the safe-- Restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
- Select Safe Mode with network when theWindows Advanced Options menu appears, and press ENTER.
- When the boot menu appears again, and the words "Safe Mode" appear in blue at the bottom, select the installation that you want to start, and then pressENTER
If there is only a single operating system installed then it will start to it after choosing the Mode without fail at step 2.
If you can get the system booted without failure, first run TDSSKiller.exe.
Please tell us if it detected and deleted something.Install MBAM now and allow update when installed. Here's a good tutorial, short on the use of MBAM.
Once it has finished installing, select perform Full scan.
When the scan is complete click OK on the window that appears, and then click show results, which will open the scan log.Back to the MMFA click on Remove selected. Don't forget not that all detected objects are checked.
Once MBAM has attempted to delete the detected objects it may prompt you to restart the system.
Do it in normal Windows mode and see if you now have control over it.Expert MowGreen Windows IT Pro - consumer safety
-
It is more than one answer to a question, but I hope it will help all those poor souls who like me have been trawling around trying to find an answer to this problem where a dialog box appears with the application and then dreaded svchost.exe error crashes the computer if you click on the OK button.
Sound familiar? Well I had this in the past and have only partially successful to get rid of him (repeated restarts finally allowed me to start without getting the error). This time, however, it happened every time.
Finally, I followed the problem down this time to the update of Google and the location where the automatic updates are saved because only it uses the BITS service to download these updates. I know that this problem is also associated with WindowsUpdate and with another automatic update service (Adobe (I think). It seems that the folder where the BITS service (Background Intelligent Transfer Service) needs (which is not surprising) downloads permission to write and sometimes this permission can get disabled (i.e. to read-only).
So I went to this place, allowed him to leave, write and hey presto - end of problem!
Here is a link to the Google page that explains how to fix the problem more in detail (it's down to the place of the last bullet):http://www.google.com/support/installer/bin/answer.py?answer=96616
I think this will help a lot of people, not just those with Google update problems, but those with Windows Update and Adobe also - probably other downloaders of background update too - I bet they use all BITS to download updates in silent mode.
It is a very easy solution; No software to download, no to search in the registry, no copy of the system files. Why everyone not found it before?
I am answering my own question because it already provides the answer.
Sorry, it's the only way I know to get this solution here quickly and easily where people can find what they want easily.
-
This error occurred when while previews of image were loading in Win Explorer & Win Fax & Image Viewer... Here are the data collected in the event viewer:
Event type: error
Event source: app error
Event category: (100)
Event ID: 1000
Date: 2010-11-09
Time: 20:51:15
User: n/a
Computer: DBTOA000
Description:
Failing application svchost.exe, version 5.1.2600.5512, failed module unknown, version 0.0.0.0, address failure 0x00de96bc.For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6 c 69 63 61 74 Applicat
0008: 69 6th 6f 20 46 61 69 6 c ion Fail
0010: 75 72 65 20 20 73 76 63 ure svc
0018: 68 6f 73 74 2nd 65 78 65 host.exe
0020: 20 35 2 2 31 32 36 30 5.1.260
0028: 30 2nd 35 35 31 32 20 69 0.5512 I
0030: 6e 20 6 6 75B 6F 6f 77 n unknow
0038: 6 20 30 2e 30 2e 30 2nd n 0.0.0.
0040: 30 20 61 74 6f 20 66 66 0-off
0048: 73 65 74 20 30 30 64 65 set 00de
0050: 39 36 62 63 96bcFrom what I can tell, this seems to be a low-level problem in the registry... If someone can please tell me how I can locate it?
Hi Wesley,
You can download & run the Diagnostic Windows memory from this link and check if the problem persists.
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
This occurs when the computer starts up
Hi Naeem,
1. are you able to boot into normal mode?
2 did you recent hardware or changes to the software of the system?
You can try to perform a clean boot and check if it helps. A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to configure Windows XP to start in a "clean boot" State
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
-
Svchost.exe - Application error... Help please
Svchost.exe - Application error the instruction at "0x7c923845" referenced memory at "0x00000000".
Initially I thought that I had a virus because every time that I see this pop up on my computer it crashes and I have to restart manually. This often happens when I'm on the web. How can I fix?
Svchost.exe is needed to start the required DLLs for Windows Services.
Follow these steps and post, that things have "disabled" in the title of the status column:
1. click on start
2. click on run
3. type services.msc
Hope this helps
Post back if necessary
____________________
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
error message - Svchost.exe Application error the instruction at 0x7c923845 referenced memory at 0x00000000 the memory could not be 'read' there are 2 choicesclick Cancel to complete that freezes the whole system must make a start/stop hard ouCliquez Cancel to debug and still freezes system. I noticed that I can move the notification almost window off the screen from the road and still be able to use the system, as long as I do not click an option in the error message window.
I ran M/S FiX IT, M/S, Malware, Avg free antivirus essentials, Oldtimer, Iobit and nothing found something: of course these have not been loaded on the system at any given time. I'vd sought a malware, viruses, spyware, what is causing this and nothing
How can I get rid of this? A malfunction of the malware/Adware/Virus/system or what it is?
Hi stallman0419,
When exactly do you get this error message?
You can follow the steps mentioned in the articles below which deals with a similar question
You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box
http://support.Microsoft.com/kb/927385
You receive an access violation error and the system may appear to hang when you try to install an update from Windows Update or Microsoft Update
http://support.Microsoft.com/kb/927891
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
---------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
On a page at random, Firefox briefly displays the start page by leaving the program.
When I am browsing a web site randomly and I click on the close button in the upper right, Firefox briefly displays my start page (google) before leaving.
-
Photosmart 7520: scan to printer
I'm used to be able to scan directly from the top of the glass to the printer. Now I can not because I am set for the ADF Document (CAD). How do I copy again directly in the glass to the printer without going through e-mail, computer, memory card or
-
Install Adobe Flash Player on Tablet Lenovo A1-07
I recently bought a Lenovo A1-07 tablet. I need to install Adobe Flash Player (I have other applications that depend on Flash being installed). The Lenovo APP store is like. I tried the Google game store, but Adobe Flash player is not listed. The ope
-
Card mother ThinkPad W520 on ThinkPad T520
Hi all You can resolve is to be together can be inserted W520 motherboard in a T520 series? Thank you!
-
DeskJet 3050 J610: Checking ink levels
I'm unable to check ink levels. I followed advice elsewhere on the HP Support and went to the road of "all programs/HP/HP3050 etc/HP3050 etc" which should offer me the option of checking of ink, but after clicking the last HP 3050 I get nothing! I ha