Svchost.exe - No. disc there is no disk in the drive. Please insert a disk in to drive\Device\Harddisk1\DR5

When I'm inserting an internet data card into my USB its error message indicating that svchost.exe - disc no. there is no disc in the drive. Please insert a disk into drive\Device\Harddisk1\DR5 Cancel, continue tryagain all option does not work its new popuping outside. :(pouvait point de restauration système peut aider?) or is it a problem with the virus please help.

Hello

1 did you change on your computer?

2 what other USB devices are detected on the computer?

Try connecting to another USB port and verify.

Connect the card to internet data to another computer and check if works

I suggest to download and install the Microsoft safety scanner and run the scan and check.

http://www.Microsoft.com/security/scanner/en-us/default.aspx WARNING: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate

Tags: Windows

Similar Questions

  • There is no disk in the drive. Insert a disc in the drive device harddisk5 dr5

    I started getting this error message "there is no disk in the drive. "Insert a disk into the drive device harddisk5 dr5.  I have to click on about 20 times and it goes away eventually.  I use Windows 7 and have been unable to find an answer to how to make this message go anywhere.  Any suggestion would be appreciated.  Thank you!

    Hello

    ·         Were there recent changes made on the computer before the show?

     

    This problem occurs when all the following conditions are true:

    (a) you have a removable drive, such as an Iomega Zip drive, configured as the drive letter C.

    (b) you don't have a removable disk in the removable disk drive.

     

    Method 1:

     

    Change the assignment of drive letter for the removable a drive letter other than C:\.

     

    a. log in the computer as an administrator.

    b. Insert a disk in the removable drive.

    c. type computer management in the start search box and press ENTER.

    d. click on disk management.

    e. right-click the partition, logical drive or volume that you want to change and then click on change drive letter and paths.

    f. click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.

     

     

    Method 2:

     

    I also suggest you to start the computer in a clean boot and check which program non-Microsoft is the origin of the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/929135

     

    Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

     

    Method 3:

    You can go to Device Manager and see if you have any yellow bang! for the mouse or devices.

    (a) click Start and then click Control Panel.

    (b) click on system and Maintenance link.

    (c) in the system and Maintenance window , click the Device Manager link at the bottom of the window.

    In Device Manager, go then, mouse or other pointing devices.

    Do you see a yellow fringe! This would mean that you have an error with this device. Try to remove and reinstall.

    I hope this helps.

  • How to remove the error message there is no disc the disc in the Drive\Device\Harddisk1\DR1

    There is an error message which keeps popping up and I push to cancel several times before it will go away however he comes back to the top on my screen at random times. Meesage hpqtra08.exe - no disc, then below it reads "he not there no disc insert disc in the Drive\Device\Harddisk1\DR1.
    Please help me to remove it from my computer!

    Hello lala80,

    Thank you for using Microsoft Vista answers Forum!

    hpqtra08.exe is normally installed as part of the HP all-in-one printer, scanner, driver copy and install the software. It is a non-essential process, and it is at the discretion of the user, whether to disable. If disabled buttons as scan in the 'all-in-one' continues to work. However if you never use it it is safe to disable. It does not work, just the button scan in the multi functional.

    You can disable this feature by using msconfig in Windows.

    Click Start and type msconfig in the search box and press enter

    Click the Start (top row)

    In the list of programs, uncheck hpqtra08.exe

    If please reply and let us know if your problem is resolved or if you need more help

    David O
    Microsoft Answers Support Engineer
    Visit our and tell us what you think.

  • «There is no disk in the drive.please insert a disc in the drive \Device\Harddisk1\DR4.»

    Hi all!

    When I try to install AVG on my WINDOWS XP SP2, a message is displayed with Titile "scvhost.exe - no disk" and the body of the message said that "there is no disk in the drive. Insert a disc into drive \Device\Harddisk1\DR4.

    attachment: -.

    http://i51.Tinypic.com/6zoaoo.gif

    or

    Please help me as soon as possible!

    Thank you very much!

    Post in the forums of users AVG.

  • Error: "regsvr.exe - no disk there is no disk in the drive." Insert a disk into drive\Device\Harddisk1\DR1 "_".

    Original title: regsvr.exe - disc no.

    Hello

    I get an error message whenever I insert my pen drive or memory card in my laptop. The error message is "regsvr.exe - no disk there is no disk in the drive." Insert a disk in the drive\Device\Harddisk1\DR1. There are only three options - Cancel, Try Again and continue. None of them works. I have to manually stop the system to get rid of it. Please help me get rid of this error message for always. Your response to this regard will be highly appreciated. Cordially Sashwat

    Hello, Sashwat

    If possible, test the drive in another computer and check if you are able to access or not. If this is not the case, the drive may be bad.

    If it's a USB card with an SD card reader, rather than a dedicated, flash drive check if the card is recognized and accessible in other drives/devices. Also, check the metal contacts on the card to make sure that nothing is blocking the metal contacts. If the card cannot be read in other devices and contacts are clean, the card is likely bad.
    If other devices can access the drive, but not by the card reader, the card reader could be bad.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Please insert the floppy disk in drive\device\harddisk5\dr5

    I get this error message whenever I open 7 elements.  The upper part of the error message says PHOTOSHOPELEMENTSORGANIZER. EXE - NO DISK, then the IT IS WITHOUT DISK in THE DRIVE.  PLEASE INSERT a DISK IN the DRIVE\DEVICE\HARDDISK5\DR5 is displayed.  I can't go out, cancel, try again, or continue.  Can anyone help?


    Thank you!

    Yes, I would try a re - install.

    See you soon

    Bob

    ------------------------

    Become a friend of Photoshop Elements on Facebook

    http://www.Facebook.com/PhotoshopElements

  • Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K

    Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K. I won't record anything. It keeps popping up when I want to stop and he let me close. And it won't go away. I tried the Task Manager, and who is unable to complete the task. I went to his file and tried to delete, but it's not going to get out me of my PC

    Hello

    1. what version of operating system you are using?
    2. did you of recent changes on your system prior to this problem?
    3. when, exactly, you get this error message?

    You can try the steps mentioned below and check if it helps to solve the problem.

    Method 1: Scan your computer anti-virus using the Microsoft Safety Scanner.

    Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

    Method 2: Try to boot in safe mode and check if the same problem occurs.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

     

    Method 3: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Hope this information is useful.

  • Explorer.EXE - no disc: there is no disc in the drive. Insert a disk in drive \Device\Harddisk2\DR2

    Original title: \Device\Harddisk2\DR2

    I get this popup of the application:

    Explorer.EXE - no disc: there is no disc in the drive. Insert a disk in drive \Device\Harddisk2\DR2

    How can I get rid of it? I don't mean to access drive... it just popup as soon as I open my computer.

    Thank you

    John

    Hello

    ·         Do you get this error message when you restart computer?

    ·         You will remember to do recent changes on the computer before this problem?

    ·         You are able to open Internet Explorer?

    ·         You have a hard drive connected to the computer?

    I suggest to restart the computer in safe mode and let us know the status of the issue. Follow the steps in the link to start the computer in safe mode:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Please see the link: how to fix explorer.exe - error disc no.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/how-to-fix-explorerexe-no-disk-error/76ef7ebd-5FCD-4c6e-9f33-50b6aae4a4e9

    You can also have a look at the following Suggestions for a question on the help forums:

    http://support.Microsoft.com/kb/555375

  • SE error message: there is no disc in the drive. Insert a disk in drive \Device\Harddisk1\DR1

    Original title: CMD. EXE - NO DISK

    I use Windows Vista Home Premium 64

    I get a pop box which reads:

    cmd.exe - disc no.

    There is no disk in the drive. Insert a disk in drive \Device\Harddisk1\DR1

    It appears each time I try and do anything. It gives me 3 options "Cancel, try again, continue»

    If you click over there enough he goes, then pop up when you try to do something else.

    I tried to run Norton (without success), Spyware remover tools (Adware - without success)

    Any help would be appreciated.

    Hi angelover08,

    1. have you tried to change the drive letters of removable disks?

    If this isn't the case, you can try to change the drive letter designated to removable drives all the other letters other than E, F, G and check if it helps.

    Check out the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

    When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
    My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
    Are installed:
    FW MS .NET 1.1
    MRS. NST FW 3.5 sp1
    MS SQL Server 2005
    MS SQL Server 2005 compact Edition [ENU]
    MS SQL Server 2005 Native Client
    MS SQL Server Setup Support Files
    MS SQL Server VSS writer

    Here is the error log:
    [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

    Try to post or search the MSDN Forums

    http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

    http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

    There are indications that some USB devices may cause this error. Try unplugging as much as you can.

  • No disc in the drive - no. disc, 'there is no disk in the drive. Insert a disk in drive \Device\Harddisk1\DR1

    Hello

    I use windows 7. When I try to connect the usb modem or remove drive in my computer, and then sometimes it displays a .exe - no disk popup, "there no disc in the drive. Insert a disc into drive \Device\Harddisk1\DR1. There are 3 options Cancle, retry, continue. But these options never work. It appers again. (I can't repair/restore my pc because I have only One Drive (C). so please help me...)

    Hi Kalyan,

    Thanks for posting in the Microsoft Community. Help us with more information:

    1. This problem is specific to these devices?

    2. Have you tried to connect the devices on different USB port?

    This problem can be caused by damaged USB drivers. I suggest trying the steps and check if it helps to fix this problem.

     

    Remove and reinstall all USB controllers

    To remove and reinstall all USB controllers, follow these steps:

    1. Click Start, click run, type sysdm.cpl in the Open box, and then click OK.

    2. Click the hardware tab.

    3. Click the Device Manager button.

    4. Expand Bus USB controllers.

    5. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

    6. Restart the computer to reinstall the USB controllers automatically.

    7. Plug in the removable USB storage device and test to make sure that the problem is solved.

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • Get "there is no disk in the drive has it please don't insert a diskette into the drive device drive hard/dr3/dr4 etc etc" error after installing the Bitdefender program.

    There is no disc in the drive please insert a disk into the drive device drive hard/dr3/dr4 etc etc.

    Original title: coordinator.exe no disc

    I got this message after installing BitDefender antivirus.
    It turned out to be partly because of WinPatrol - who had not been uninstalled.
    And the program uninstal delete his entry autostart nor its program file.
    Which has supported, manually, the end of the message...
    But I guess that's not specific to WinPatrol, which is an excellent monitor if it is not in conflict with the antivirus.  (It worked well alongside Avast.)

  • Starting problems, get the error "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1.

    1st problem: yesterday I started getting a popp window with the text following formulation - "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1' I have no idea what this introduced him or how stop it.  Any suggestions?

    2nd problem: whenever I restart my computer or shut it down and then power up the white bar that moves from left to right only moving to halfway through and then stops. I then have to hold the power button in until the computer turns off again and then rehit the power button. When it starts to power back up the white bar is always in the Middle, but then begins to finally complete the passage to the far right of the box. This problem started when I loaded the software for my printer Canon MX870 new that I bought and installed in October 2010 and has been done since then. I removed and reloaded the software of the printer on three different occasions but the problem persists.

    Hi frankb911,

    Please see the thread with a similar problem and fix possible:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/there-is-no-disk-in-the-drive-please-insert-a-disk/b9a130b2-4261-4385-a51f-28005f209a1d

    I hope this helps!

  • Insert a disc in the drive \Device\Harddisk3\DR3?

    have a vi with sub about 20 screws in his .llb that makes a fair bit of the interaction of the data base and data acquisition.

    When it comes to 'entries preparation' sub vi in State "expt prep", if she is not simply close labview entirely, it gives 10 'Please insert a disc into the drive \Device\Harddisk3\DR3' errors in a row, then ends.  in fact some of the 10 are asking Harddisk4\DR4, but I still don't know what he's talking about.

    very mysterious, that is if I delete as void / vi and replace it with artificial constants, it does the same thing.  I use breakpoints, step over and highlight the execution and cannot see what is causing the error, it's like there is a short circuit in the wiring itself (!).

    was blocked for a day now.  thoughts?  tried to cut and paste the entire block diagram in a soft vi, labview opening/closing, restart, reinstall LV (2011 sp1) and daqmx 9.5.1 no effect.

    code attached

    new data - copy & paste the contents of the sub-vis & vi new screw do not affect not error, gutting all error DAQ hardware program priest DOES.  Board of Directors is a NI PCIe 6363.

  • ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.

    ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.

    We recommend that you reset your C510 HP first. You can perform the reset by following the steps below:

    1. press the "Power button" to activate the product.

    2. with the product, unplug the power cord from the back of the product.

    3. disconnect the power cord from the wall outlet.

    4. wait at least 15 seconds.

    5. plug the power cord into the wall jack.

    6. reconnect the power cord to the back of the product.

    7. If the product does not light by itself, press the Power button to turn it on.

    Once done, print a self-test report by following the next steps:

    1 load plain white paper in the input tray.

    2. from the home screen on the control panel of the product, click "Menu" on the upper left side. A list of menu options screens. 3. click on "Settings" and then click on 'tools '. The maintenance of the printer menu displays.

    4. in the maintenance of the printer menu, click "Printer Status Report". The product prints the report.

    If the report is printed correctly, try again to print your original document.

    If the problem persists, you may need to check the status of documents in the status bar. To do this, follow these steps:

    1. remove the stack of paper from the status bar.

    2. check that the obstacles within the status bar. A flashlight to view the mechanism inside the status bar to make sure that nothing is blocking the paper to engage with the rollers. Even small pieces of paper can cause paper feeding problems. (Important: If any obstruction is detected in the paper path, you need to refer to "Cleaning the rollers" segment at http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken)

    3. to review the status of the paper and then replace any paper torn, dusty, curled, wrinkled, or bent.

    4. ensure that all the papers in the stack are the same size and type. Never charge which coexist types of paper in the tray. The product can only process one type of paper at a time.

    5. press on the stack of paper on a flat surface to align the edges.

    6. make sure that the paper stack does not contain less than 10 and not more than 25 sheets paper.

    (Note: the limitation of the number of documents applies only during the phase of solving problems.) Once the problem is resolved, you can load the tray to its original capacity).

    Once you have checked the status of documents, reload the tray in the following way:

    1. lift output in open position and open the door of the feeder.

    2. slide the width guide to its outermost position paper.

    3. Insert the stack of paper into the paper tray with the short edge forward and the print down side.

    4. adjust the paper width guide so that it rests against the stack of paper.

    5. lower the output tray, and then close the tray door. Once this is done, print again an automatic test report by following the above steps. If this too does not resolve the issue, refer to some more solutions at HP support center link below: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    GuruAid.com

Maybe you are looking for