Svchost.exe running 93-99% of my cpu

Similar Questions

• Svchost.exe to 47 to 52% of CPU usage! ;-(

  For some strange reason, I have svchost.exe running at 47 to 52% cpu usage.  It's 6 380 to 6 444 K memory with the standard description of host for Windows process in the Task Manager.  User name is NETWORK SERVICE.  The system idle process is a 36% with 57 to 67% CPU usage.

  ANY ideas what it is?  I thought maybe would it be re-indexing, but it went on-and-on-and-on... ;-(

  I use McAfee AV on my chip 64-bit Vista Ultimate OS and Intel (Dell Inspiron, 500 GB HD, 4 GB of RAM; LED display).  Hard disk no is used, is nearly 80%.

  Last scan was clearly for the AV scan

  TIA

  To check what service to use the CPU in a svchost with Process Explorer:

  • Click on "Show details for all processes" in the menu "file".
  • Make a right-click the svchost that you are interested in
  • Click 'properties '.
  • Click on the tab 'son '.

  Doing this causes some recent versions of Process Explorer crash on my Vista system but the 15.12 version published yesterday (January 12) seems to be OK.

  The phenomenon of high processor by Dnscache usage has been reported elsewhere, for example,

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/d2a2ad2d-A406-410C-9B7A-e22104fd2e2e/

  A possible cause is a large number of entries in the hosts file. Some security software (anti-spyware/ad blocking) can use this method to block malicious Web sites. You can reset the hosts on its default file using this fix it.

  http://support.Microsoft.com/kb/972034

  You can also try to flush the DNS cache:

  http://www.Vistax64.com/tutorials/74209-DNS-resolver-cache.html

  If it's not the hosts file, try to uninstall McAfee in the case which is in question.

  If you can't find what is the cause, running with disabled dnscache should not cause problems.

• several svchost.exe running

  I can't start my Windows Vista, even after several repair system. Now, I'm in safe mode and noticed to Bishop of the task that there are several svchost.exe running. This could be the culprit? The repair of the system said that a recently installed or updated driver prevents windows to start. Appreciate your comments.

  Hello

  After using the Troubleshoot utility above and if so, try a clean boot.

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• striking of svchost.exe running 60%-90%-100% cpu, programs stop responding and no work is done

  Svchost.exe (DcomLaunch), (LocalServiceNetworkRestricted), (LocalServiceNoNetwork), (NetworkService), WmiPrvSE.exe all use a percentage high CPU at the same time and once the CPU reaches 100%, no job-processor programs remains 100% different services 'line up' one after the other in the resource monitor. There has been several cases where an odd address momentarily appears on the tab of the Firefox home page at startup. Also had the pop-up WARNING this computer is "exceeding number of 16-bit programs running. Restart is 'ignored' and need to turn off the computer and start to break the "line-up".

  Avast, Spybot S & D, Windows Defender, all up-to-date and not find anything. Used Microsoft tool of support of emergency with nothing to be found.

  PH

  I've never seen WPR cause this kind of issue. If you want to try aand the system repair please do below.  It may be just more easy to restore from a backup, or do a clean install of windows.

  What may have caused it

  Run-Malware malwarebytes

  System question - may be why svchost was using high CPU (run a filesystem check)

  Hardware HD-question-run CHKDSK

  Please download the free version of Malwarebytes.

  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

  CHKDSK /R
  CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found all the data available in this area could be lost so as always back up your data.
  Run CHKDSK /R from a high command (run as administrator).
  Do this for each hard drive on your system.
  When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.

  Then restart and let the test to run.
  It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.
  http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/

  See "CHKDSK LogFile' below to verify the test results.

  CHKDSK LogFile:
  Click Start and type "eventvwr.msc" (without the quotes) and press enter
  Expand the topic the Windows logs, and then select the Application log file entry.
  Double-click the Source column heading.
  Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).
  Copy / paste the results in your next post.

• Svchost.exe - k netsvcs process uses 50% CPU at startup of Windows 7 PC

  Hello

  Can someone advise? I have a 32 bit Windows 7 laptop and when it is on, svchost.exe - k netsvcs will run and make use of 50% or more of the CPU and finally up to several hours.

  It is a very annoying problem where even if I complete the process using the Task Manager, it reappears shortly after. A reboot also sees a resumption of the process.

  I traced this problem to the (wuauserv) Windows Update I had to turn off to avoid the recurring problem. But as this is not an optimal solution, I'd quite like to know how to solve this problem permanently.

  Thank you

  Martin O'Shea.

  The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.

  Make sure that KB3020369 is installed, otherwise install it manually.

  Win - 7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=46827

  Win - 7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=46817

  Then install manually KB3172605 M$ plays cat and mouse with this download to update if the link and the download does not work, you will need to use Internet explorer and get instead of the catalog

  http://catalog.update.Microsoft.com/v7/site/install.aspx

  https://support.Microsoft.com/en-us/KB/3172605

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53335

  Win-7 64-bit.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53332

  After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.

  If you need Visual AIDS to refer to this

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

• WmiPrvSE.exe running using 25% of the CPU.

  Just yesterday, I noticed that my CPU was running several processes to idle: WmiPrvSE.exe, svchost.exe and mcods.exe.  Mcods is a process of Mcafee, I'm guessing that Wmiprvse is the process that is currently running and trying to solve something?  I tried to restore to a previous point, but received an error message about the restoration process is not be able to find a file of the registry and not being able to restore to an earlier point.  I ran a scan of full virus/malware with McAfee as suggested in other responses of WmiPrvSE and no problems were detected. I'd appreciate any help troubleshooting this.
  I am Windows 7 64 bit and only a novice with the computer jargon.

  Hi Tommp100,

  Welcome to the Microsoft Answers site!

  I suggest that you read the article in the link below and isolate the application which is in fact the origin of the problem.

  http://blogs.msdn.com/WMI/archive/2009/05/27/is-Wmiprvse-a-real-villain.aspx

  Let us know if the information has helped.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MsMpEng.exe running non-stop using 100% CPU and slow my computer down makes it difficult to use

  MsMp Eng.exe running non stop using 100% of cpu and slow my computer down makes it difficult to use, I just need a way to disable this program

  Hello Ian,

  Have you tried the Task Manager to end? Right-click on the taskbar and select Start Task Manager. Locate the application and click on end task (at the bottom of the page). I wonder if it's a piece of malware running, or even a virus. If it will not be closed, or starts just backup again, consider using these scanners:

  Malwarebytes': http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html .

  SuperAntiSpyware: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html .

  ESET Online Scanner: http://www.eset.com/us/online-scanner/ .

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• is it safe to stop svchost.exe running in my task manager

  I have a lot of ongoing process and I don't know what I can close safely to make my computer work better. There are a lot of svchost.exe process in the list.

  Leave them alone.

• My Windows XP SP3 system has a svchost.exe process that has started to use a good bit of CPU - 18 to 30% at idling.

  I've referenced KB 314056 to make a list of "tasks". There are 30 services running on this process.   FWIW, my wife's PC has the same services that runs under a svchost.exe process without a lot of CPU usage. How can I get figure out what service (s) is/is the use of the resource of CP?

  I found the culprit. I run Secunia PSI. The site is at www.secunia.com. When I stop this program the SVChost process falls to zero use. I run the same program on two other PC XP3 Windows without problem.

  I'll follow up with Secunia. Thanks to all who tried to help.

• SVChost.exe cpu issue with XP Pro after removal of Trojan

  My sister recently downloaded a virus on my computer. I removed the Trojan horse and have had problems with SVChost.exe are beginning to eat time CPU. This is usually triggered when I start Firefox. It may be unrelated, but I do not. I did a uninstall/reinstall on Firefox and now it will briefly be blip in the Task Manager process tab, but it disappears almost immediately.

  I service Pack3 on my machine, so I don't think it's the SVChost service Pack3 fixed problem. I ran a repair of XP once I have nuked the Trojan horse. I ran across the virus alarm area scan, adaware, and malwarebytes to make sure that the thing had gone gone gone.

  I did a check on what is in the regedit for svchost, and it has the following:

  default reg_sz

  DcomLaunch REG_MULTI_SZ

  DOT3SVC

  REG_MULTI_SZ

  DOT3SVC reg_multi_sz

  eapsvcs REG_MULTI_SZ

  getPlusHelper REG_MULTI_SZ

  HTTPFilter REG_MULTI_SZ

  imgsvc reg_multi_sz

  LocalService REG_MULTI_SZ

  netsvcs reg_multi_sz

  NetworkService REG_MULTI_SZ

  RPCSS reg_multi_sz

  termsvcs REG_MULTI_SZ

  wudfservicegroup reg_multi_sz

  I did some research, and I don't know where to go next. I think it's a registry issue maybe, or a svchost corrupt, but since I have service pack 3, I don't know if there is something else I can do, especially since the question seems to start when I start Firefox. Don't use not Firefox may be an answer, but I really want to make sure that the problem is resolved so that my computer is not get no more corrupt than it already is.

  I saw in my research programs will supposedly fix your registry database, but they seem to be more malicious sites, so I am wary of downloading something that is not specifically to Microsoft. Does anyone have a suggestion as to what I might want to do next? Everything I've read seems to indicate the problem but not the solution. Thank you for taking the time to watch it!

  Beki

  I think you can still infected?

  Try to run one scan of other suppliers and also if you want you can send me your HijackThis report for analysis on my e-mail address in my BIO profile.

  What the name of the Trojan horse?

  NASS - http://www.nasstec.co.uk

  Thanks Nass and Paulogergo,

  I think that I fixed it. I have re-ran all my antivirus programs and I did forget to empty my cache and temporary files. I clear up the registry and system files. I think that the real culprit was Zone alarm. They have this new feature, called force shield. I didn't know that there was a cache that had to be cleared out. Thus, the register needed to be cleared up, but the problem of Firefox was my firewall program. My machine worked fine for the last half hour with no slow worms down or my sessions of cpu overloaded. I run a defrag during the night to make sure. But it seems that everything is copacetic. Thank you so much both to look at this for me. I have not had a virus in 10 years and I forgot what I didn't.

  Beki

• Svchost.exe is causing cpu at 100% of capacity

  My computer is very slow. I ran the antivirus software and malware, and it finds nothing. Finally, I found that the CPU is at 100% and it looks like several SCVHOST. EXE are running taking up all my CPU. How can I stop this and speed up my computer?

  Help, please!

  There are supposed to be several svchost.exe running process.

  This is explained in article http://www.howtogeek.com/howto/windows-vista/what-is-svchostexe-and-why-is-it-running/ there are also instructions on how to get more information about which services can cause problems.

• Computer with Windows XP running slow and what is Svchost.exe?

  Original titile: my Acer One ZG 5 is apparently very slow a file called scvhost.exe (I think) eats memory. What can I do?

  My Acer One ZG 5 is apparently very slow a file called scvhost.exe (I think) eats memory. What can I do?

  What is useful or even possible to upgrade to windows 7?

  Hello

  Svchost.exe is a process on the computer that hosts, or contains, other individual services that Windows uses to perform various functions. For example, Windows Defender uses a service that is hosted by a svchost.exe process.

  There may be multiple instances of svchost.exe running on your computer, each instance containing different services. One instance of svchost.exe can host a single service for a program, and another instance can host several services related to Windows. You can use Manager tasks to display services running under each instance of svchost.exe.

  To view the services that are running under svchost.exe:

  (a) open the Manager the tasks by right-clicking on the taskbar and then click Task Manager.
  (b) click on process tab.
  (c) If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
  (d) Hovering mouse on one of the processes will show you a list of all the services.

  You mentioned that your computer is running slowly. Follow the troubleshooting method specified in the link here.

  Method: Follow the steps for Windows XP.

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=ZX7S9AI1uI1

  You can follow the steps here to upgrade Windows XP to Windows 7.

  Upgrade Windows XP to Windows

  http://Windows.Microsoft.com/en-in/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See this link:

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=I9GWec8FSz3

  Email us if you have any further questions. We will help you.

• Second Process Explorer that run under the NEST 6200; as svchost.exe that runs under the NEST 6200

  I found, when the use of Process Explorer, that a second version of the Explorer P. works too, but its icon (left) is a standard and not the true icon of the Explorer P..  This second version ran under the NEST 6200, which I believe has to do with a modem.  I have a modem on my Vista machine, but it is not used (no telephone connection).  I went into the folder where P. Explorer runs and found procexp.chm, and when I tried to open the file, Windows said it was a program.  To disable, I renamed it, and now I'm not running.  Also, I found of svchost.exe running under the NEST 6200, but with no description, co. name, path or command line.  I have known big bed (over 500 MB), using svchost.exe, from time to time.  I think having a virus.  Can someone tell me what I have and then tell me how to remove from my machine?  (Also, I've known a slow machine, usually after starts.)

  I have two versions of svchost.exe on my machine.  Tests for a virus showed neither to be a virus.  I tried to delete the version that is not in the c:\windows\system32 folder but am unable to do so.  Can someone tell me how to delete such a file, or to replace it with the correct version?

  Hello

  Thanks for posting your question in the Microsoft community!

  After the description of the question, I understand that your computer is very slow. I'll be happy to help you on this question.

  Let us try the following methods.

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow how to reset the computer to start as usual after a repair by article KB929135 clean boot to reset the computer in normal mode.

  Method 2: Virus scanner online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you perform online virus scanyou will lose some data which are affected by the virus. Microsoft is not responsible for the loss of this data.

  See also the link: Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=kmc757u4Zlo

  After trying the steps above suggested, giving us the results. If you are able to solve the problem concerning the performance or let us know additional troubleshooting results.

• Slow/svchost.exe constantly running Windows updates.

  What is going on? It's "Patch Tuesday/Wednesday" and updates are not just downhill. By clicking on "check for updates" some results in an endless search for updates and svchost.exe runs constantly on my computer this morning and continues to despite several reboots.

  It is obviously something to do with the Windows updates, as they are supposed to nd today I'm worried how and when this will be looked at in / fixed.

  I suppose that decisions to accumulate all of the updates in October and prevent users from having a choice in what they do/don't install has something to do with this current problem?

  (Have not changed the settings / installed what either, and I did not install W10 either.) The OS that is on my computer, now, is what was on it when I bought it so bar regular update via windows nothing has changed.)

  Please click below take a look at this discussion:

  Windows Update problems?  First read this.

  You can read some of the latest answers on the last page from the bottom to see what others have had to say lately.

• Svchost.exe several process taking high CPU usage

  * Original title: svchost.exe bleeding memory of multiple processes

  I am running Windows 7 Ultimate 64-bit Service Pack 1 on decent office equipment.  Intel i7 - 2600 k, 16 GB of memory Corsair, 2 TB HD.  Recently, I noticed that sometimes the Web pages would much to slow while my 5.0 GHz network turned to 15.0 Mbs.  Also online MechWarrior gave me games much more than before lag to the point where I wouldn't be able to play.  This began about five to seven days from 29/09/14 and was regularly do worse.

  So I took a look at my resource monitor and the Task Manager and discovered fifteen process svchost.exe running and a svchost.exe * 32 running.  They were dispersed users (System, Local Service, Network Service), and we were shooting at 150 000 + K.  Sometimes there would be two consuming the same amount of memory, but I have yet to see more on the list do so.

  I'm certainly not an expert, but I take care of my computer.  My network is password protected, I ran a complete virus scan of the system that was detected (and if it is dangerous, I'm not at all more risky than Facebook sites on my PC.  I am saying that it is highly unlikely that I have no virus.)  I also checked the forums for others who have had the same problem and there were few.

  The only change I made is my network hardware, upgrade my modem and router/switch.  My router is a dual band and my computer is the only one on the frequency 5.0 but check on my computers to families that run on the 2.4, they have what seems like unusually high memory usage svchost.exe as well.  I went back two restore points, but that made no difference.

  Syschk control function run as administrator has not resolved the issue as well.  So what else am I missing?

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask