svm BIOS setting

Hi I have a laptop Hp G62 b60Sd.

I found a support SVM Bios setting, what do I do when enabled, and it is useful to activate?

Gretings

Line,

Jan

Janludb wrote:

Hi I have a laptop Hp G62 b60Sd.

I found a support SVM Bios setting, what do I do when enabled, and it is useful to activate?

Gretings

It is useful if you have an AMD processor capable of virtualization.

SVM stands for sure virtual machine.

This was well explained by forum member Pro Cyclops In his message in a thread.

Best regards
ERICO

Tags: Notebooks

Similar Questions

  • Satellite Pro M30 Bios error resource conflict - bios setting change or boot

    Hello.

    My beginning of portable satellite M30 with a bios error. The error that says "resource conflict, the bios setting change or start" If select 'start' the computer crashes before windows starts completely. I have remove the wi - fi and modem module and the same error message. I can't update the bios because the windows start. The bios version is 1.7. The laptop is the UK version. If select "Edit the bios", beginning of the bios but I can't find any resources management.

    Thank you

    (Sorry for my English, I'm from the Spain)

    Hello

    I think the bios error change setting means that you need to access the BIOS and should set the BIOS default settings.

    Please to do this, save the settings and try to start!

  • HP - g62: bios set up locked

    Hello! I have a laptop hp - g62 and my BIOS set up has been locked after I entered 3 wrong passwords. the key is 73251517. Please help me it unlocked.

    Steps to follow:
    1. use the posted above unlock code to access the BIOS
    2 disable all passwords that are enabled
    3. If the request for current password - enter the unlock code
    4. for the new password, simply press the ENTER key
    5. repeat the same thing to check the password column.
    6. then exit the BIOS saving & output option to save the changes.

    Troubleshooting:
    Incase if the password does not work please try a Hard Reset as follows.

    1. power off the laptop

    2 disconnect the power adapter and remove the battery

    3 hold the Power button for 30 seconds

    4. connect the power supply/AC adapter (leave the battery at the moment) and start Notepad

    5. If now see you a password, please enter the same password I've shared before and press on enter

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you
    K N R K
    Although I am an employee of HP, I speak for myself and not for HP

  • HP 630: I can't access hp hp630 bios setting... I do not know my password... can you please help.

    I can't access hp hp630 bios setting... I do not know my password... can you please help.

    Hello

    Enter 42444370

    Kind regards

    DP - K

  • How to enter the IdeaCentre Q700 BIOS setting screen?

    How to enter the IdeaCentre Q700 BIOS setting screen?

    Tried F1 and there is no setting in the BIOS.

    Thanks for any help!

    Hi and welcome to the forum!

    Lenovo's Manuel said:-

  • Adding disk hard BIOS setting

    I added the 1 TB SATA drive.

    Now things are going wrong after reboot without initial flaw. No USB, slow performance. Starts at W8.1, but something wrong with the USB devices.

    I see a short menu at startup. says press ctrl-I to define the two hard drives. However, this brings me to any hardrive settings.

    I looked in the BIOS setting and the disks are configured in RAID. Is it OK? I haven't changed anything!

    Thanks, nice to hear that my settings are good. FYI the SATA drive was an ext SATA disk with only data, not bootable. I'm not going to change anything more. However the Sharkoon had a USB connection too that I had to use when my system recovery with Norton disk recovery disc. But the last time was already a long time and now I have True Image as a backup utility.

    But end good all good.

    Thanks again for your support in this matter.

  • where the virtualization is technology BIOS setting aspire v5-561-6607

    where the virtualization is technology BIOS setting aspire v5-561-6607


  • How do my bios set up in hp pavilion dv4 panoramas

    How do my bios set up in hp pavilion dv4 panoramas? Thank you

    Hello

    to power on you will see at the bottom of the screen a way to enter the configuration menu boot command or bios

    It would be F2 or delete etc to enter the bios setup

    Contact HP support

    http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

    or ask in the forums to Support HP

    http://h30434.www3.HP.com/

  • BIOS setting after the installation of the motherboard on HP Pavilion slimline 3620

    I just installed a new motherboard and now I need to know if I should change any BIOS setting or something else before I can use it.  All I've done is taken in and turn on, then press F10.

    Check with HP.

    http://welcome.HP.com/country/us/en/support_task.html

    HP drivers and downloads at the link above.

    http://welcome.HP.com/country/us/en/contact_us.html

    Contact HP.

    http://h30434.www3.HP.com/

    HP forums.

    If you put a different motherboard in, you will have problems.

    You must proceed jointly with HP.

    The installed operating system drivers are related to the original motherboard.

    See you soon.

    Mick Murphy - Microsoft partner

  • dcd5800 sff desktop PC: dc 5800 sff I m not able to change the bios setting

    How to get the password of the bios

    as I m having dc 5800 sff f10 bios password I forgot kindly help as I not able to change the bios setting

    Updated the BIOS will not clear the password.

    You can try pressing and the little button cmos clear yellow with the jumper removed password and see if that does anything.

    I think that the motherboard has a problem because removing the rider of P/O should have removed the password.

    Now turn you on the PC with the jumper removed, correct?

    You turn off the PC and unplug him.  You then remove the jumper P/W and then turn on the PC.

    That's when the P/W should be cleared.

    Then you shut down the computer, unplug and replace the rider of P/W.

  • The PowerEdge 2600 bios setting

    Hello

    My server lost power over the weekend and cannot initialize case cannot find devices.

    All bios setting missing includes date and time.

    Here's what I've done but not success. My server has RAID with 3 hard disks.

    First of all in the bios integrated devices was off, so I changed it to SCSI, and computer starts, but crashed on blue screen.

    Then I changed to SCSI in RAID and got message cannot find the device again.

    I'm sure that my hard drives has been fixed to plunder so I hit ctrl-m for configuration utility and find 2 logical drives witch are correct, but all 3 physical disks in raid 0 ch are fail.

    I just want to know how can I save my data, please help.

    If all your disks are failed, then you will need to force both of them online. IF you're sure that no. disks have failed before the blackout 100%, then you can force online TWO disks (assuming that it was a 3-drive RAID 5). If you are not 100% sure that some drives have failed before the failure, then forcing online two poor readers can corrupt/destroy your data.

    First thing to do: CTRL-M start and go to configure, view/Add. If you are prompted to choose between the disc and the NVRAM views, see what each lists the configuration. Do NOT save a configuration until you have seen them both and you will receive instructions on how to proceed.

    You may be able to get direct help, in real time and free of charge by calling Dell technical support line, which must offer support on older machines. (In the case of United States / Canada.)

  • HP Mini - Stupid win 8 - How to go to bios setting or start setting?

    Since yesterday, I can't find how to go to the bios setting or how to get to the start option.

    I read all the articles on this forum about pressing esc, f9 or f10 when laptop start from.

    But never work. All this button never work.

    ....

    Someone tell me combination with the fn key, but it also did not work. Whenever I have press fn + f9 or fn + f10 when laptop start start doesn't see the bios or start menu.

    ....

    Is this because I use windows 8?

    My laptop is HP Mini 110-3500 with Windows 8 in there.

    ....

    Then I try to search "how to go to bios of windows 8', I found a lot of articles, most of them using the bios UEFI. setting." But on my HP Mini, there is no setting UEFI?

    ....

    Can someone tell me how to get to the bios setting or how to get to startup options?

    I want to reinstall the HP Mini with my usb flash drive.

    Thank you

    RESOLVED,

    To go to the bios setting, press ESC and hold the laptop restarts, only not on the market

  • PE2950, virtualization and VMware ESX 3.5.2 technology bios setting

    I PE2950 with VMware ESX server 3.5.2 is installed.

    The activation of the "Virtualization Technology" BIOS setting (under information CPU) will cause problems with the operating system? (it was disabled when installing ESX on it – default setting)


  • BIOS setting where in Hp 110-3100

    Where is BIOS setting located in Hp 110-3100 Windows 7 starter. I want to set my BIOS to boot to start initialization with a collection device external n. help me.

    Usually you hit the Del key several times as soon as you turn on the PC to access the bios screen

  • Satellite L70 - A - 13P - cannot get into BIOS after the BIOS setting password?

    HI, Satellite L70 - A - 13P

    I set up a password user and supervisor. Works very well. However, I can't get into bios. If I press F2 as usual, I have the box "enter password" (the same as for normal startup). After you type the password for the supervisor, computer continues initializing and do not get into the bios!

    I keep the key pressed F2 but nothing works.
    I also tried ESC, F1, INS, F12, 0.

    Help.

    User and supervisor password the same?
    Have you been able to get into the BIOS in the past?

    Proceed to a complete stop and restart the laptop. Then try with F2 or F12. When you will be asked to set supervisor password and I hope that you will be able to enter the BIOS settings.

Maybe you are looking for

  • When I put a dvd in my iMac itsays unavailable disk support

    When I insert a dvd into my iMac, it said supported the drive is not available. can you help me?

  • GPS (all cards apps) working only on wifi. Not on cell phone

    Hey,. for a few weeks now all my apps basedon like waze, cards... Work well when on wifi. If I remove (or if not connected to a wifi) wifi gps is not in my position. I have the software updated 9.2.1. And I tried to clear all the settings from the ne

  • Edit photo in iMovie

    iMovie 11. .  what I want to do is to temporarily remove or copy a photo from a project, EDIT THE PHOTO and then put back where it was, without affecting the timing of the video or the resolution of the photo itself.   I have some of this photos in t

  • Outlook Express 6: "Spelling" button is grayed out.

    Spell checking is disabled and I don't know how to activate it. It is a Dell Dimension 2400, Windows XP, O.E. 6. Installed WordPerfect Productivity Pack. Help please?

  • Run program at startup of windows 7

    Hi all I need to make a program to run at startup of windows instead of windows Explorer. How can I stop exploring to run at startup. also, I need the program to start without asking permission that is to say without the UAC window burst and ask perm