Swap of the Board of Directors system on pavilion dv6-2057 cl

Hi, just replaced the motherboard on my Pavilion dv6-2057 CL. laptop works now but started it stops at a black screen, indicating that the product information are not valid. The following information on the system board are invalid or missing. card system OOA, produce product - Configuration name - serial number - product number. Can someone tell me how to correct this info.

dsi183 wrote:

The info. in the link worked! Step by step instructions were right on and easy to follow. Laptop has a new mainboard and perfect work.

Play well! Where did you find the PCID on the laptop? A user on this forum has a new ATV, the same problem but couldn't find the CCDI.

Tags: Notebooks

Similar Questions

  • Start button / stop and display are the problem with my system (hp pavilion dv6 6116tx)

    We will give you any one (engineer) to come here and solve the problem.

    It's peer to peer forum, where users of the HP product help each other to solve problems.

    If you are really looking for a HP engineer contact HP by telephone.

  • X61T works wireless after the replacement of the Board of Directors?

    Hello!

    I have a lenovo X61T, who recently had a Board of Directors system of, after a repair by a local warranty service workshop (CompuCom), we found that the wireless (and fingerprints, scanner...) were not working.

    It seems that LED to my bluetooth on the monitor lights up and works fine, I can be able to snap the cycle as the combo FN + F5, but whenever I try to turn on the Wifi, it does not. I keep on pressing power, and he never replies.

    I can't check the fingerprint sensor is working, but I was able to light up, to scan and connect to wifi networks of this card without any problems from my Ubuntu installation on a separate volume that had no problems with the new motherboard.

    If the wireless card works in linux, so this leads me to think it's vista (32-bit business) that has the problem

    Here's what I did:

    1. Uninstalled and reinstaled drivers (did not remove the driver software, I should try that?)
    2. A ran an update of the system (found that the new bios necessary Council an update, but otherwise I'm keeping my system up to date, check every month at least for new updates)
    3. Turn off the TPM (Client Security Solution) completely (then maybe I need to reset that?)

    I don't know what could be causing the problem, I have tried to set up a connection profile and specify the wireless network and other, but I get an error saying that the wireless radio is turned and press repair to fix the problem, it does not work

    I did save the results and have save them as an HTML file (to see what happens when he tries to shut up... here are some of the messages in the newspaper that I found interesting: (the paper is long enough, so I could send it to someone if they requested))

    ERROR AcSvc (SYSTEM (Prvlg).3360.4068) [9/12] 14:24:20:405 CIpNotify::GetIpAddress: network cable not connected to adapter PCI\VEN_168C & DEV_1014 & SUBSYS_058A1014 Ok AcSvc (SYSTEM (Prvlg).3360.4068) [9/12] 14:24:20:420 GetProfileStatus: addressn Ip obtained for PCI\VEN_168C & DEV_1014 & SUBSYS_058A1014 Ok AcSvc (SYSTEM (Prvlg).3360.4068) [9/12] 14:24:20:452 GetProfileStatus: call AcTcpIpServices::IsValidIP for PCI\VEN_168C & DEV_1014 & SUBSYS_058A1014 Ok AcSvc (SYSTEM (Prvlg).3360.4068) 14:24:20:483 [9/12] AcProfileStatus::AcSvcIsValidIP (CAcLanSettings LanSettings)) EntryERROR AcSvc (SYSTEM (Prvlg).3360.4068) [9/12] 14:24:20:514 AcProfileStatus::AcSvcIsValidIP no valid IP [0.0.0.0]        

    ERROR SvcGuiHlpr (Mike (Prvlg).2304.5200) 14:24:20:826 [9/12] AcDiagnostics::AcDiagnostics: call AcSvcGetWLConnectionStatus() for pnpid = (PCI\VEN_168C & DEV_1014 & SUBSYS_058A1014)

    ERROR SvcGuiHlpr (Mike (Prvlg).2304.5200) 14:24:20:857 [9/12] error Impossible de AcDiagnostics::AcDiagnostics to the adapter object get

    Then I thought about it... Fix anway, would try to Exchange wifi cards and out the keyboard and the palmrest. Found that there are locations for 2 cards, put the card wifi of origin in another location, and before power to set up, wifi worked as if it never failed!

    So I swapped back to the original square and voila, the problem is back. Vista seems to not be happy, but fortunately, I know that the slot works very well since it was detected by linux.

    So ultimately has this amazing piece of hardware continues to grow on me. This is my first laptop class IBM Business and I must say that I am very happy!

  • Error 00ce after replacement of the Board of Directors

    Hi all

    We recently have a defective Board on a m93z, I had a technician who came to change the Board of Directors. After the passage of the motherboard, I got an alert from the bios telling me that the serial number and model are not valid in the bios. I ran an update of the bios of the exe on this site, but it did not work (os version).

    The tech told me that it was easy to change but at the moment, I have no idea what to do.

    should I use winphlash and how?

    Download the iso CD to update the BIOs of your machine. Burn this disc and boot the computer from it. During the update of the BIOs, gives you the opportunity to update the machine/model Type and serial number.

  • Model number of Board of Directors system satellite 1800 412

    What is the model number of Board of Directors of satellite 1800 412 system?

    Hello

    I found this page.
    http://www.sparepartswarehouse.com/DeviceType-vendor-modelline-modelseries-partList.aspx?DeviceType=0&vendorlevel=ModelSeries & modelseriescatid = 51077 & partcatid = 140747 & filter = 2

    You will find different tips for Satellite 1800. It is not a Satellite 1800 412, but I think it should also work.
    But the best way is to contact the Toshiba authorized service partner in your country. You can order the compatible card of these guys here, and you can be sure it's a good advice.

  • New options of Board of Directors system for w530

    Hi all - I've got w530 2436-CTO that probably needs a new main Board. He post, and when the memory is removed it gives a beep code manual says is the module DIMM or system board. I believe that my card system FRU is 04 x 1505, but I can't find anywhere to buy this part. How can I understand that other replaceable units on site are compatible? For example, I see lots of places selling 04 x 1547.

    A Lenovo doc describes 04 x 1505 as PLN Q1 AMTC-y y - TPM and the 04 x 1547 as PL Q3 W8 nAMTyTPM.

    Any thoughts? Thank you guys.


  • a white line has appeared in the middle of my screen of pavilion dv6.

    is it a hardware fault & is likely to be covered by the warranty? I had the computer since November

    shawmaggie wrote:
    Hi, thanks for the response. The line is not replicated on the TV screen. The product number is LS247EA #ABU, 5CH12613QM series dv6-6154ea name

    Thanks for the identification of the product.

    Ok.  Now we know with certainty. Your solution system of Board of Directors and the graphics are ok.

    Your display set must be replaced.

    Contact HP Total Care and get the warranty service for your laptop.

  • Cannot create disks C and D for the programs and data on HP Pavilion dv6-6c53cl with 1 TB HD

    Just bought new HP Pavilion dv6-6c53cl Entertainment Notebook - 1 TB HD (it's good).

    Bad news is that there are FOUR partitions (C, SYSTEM, RECOVERY, TOOLS HP) with the C-drive with 904 GB.   If I understand correctly, you cannot shrink C and create a 5th partition for data.  It seems that you cannot have more than four partitions...

    (quote from sevenforums.com: ' you already have 4 primary partitions - you can't have more. ") If you try to make another c: partition using disk management, you will turn your (entire) disk into a dynamic disk. You don't want to do that! »

    HP experts: Is it true? I can't shrink C and create a disk for data D?  Can I combine one or more of your three auxiliary drives (SYSTEM, RECOVERY, TOOLS HP) and a disk for data D?

    I've always heard that it was not a good idea to combine all, Windows programs, system etc all in the same giant partition with lots of photos, songs, financial data, Word files, etc etc.

    Please notify.

    I have a 1 TB hard drive and use the main C for all files. I use images software to make my own custom recovery solution, having 1 large partition makes it simpler. Custom recovery options

    However, your question is how to have another partition. Daniel made a Guide on everything this HERE

  • It is Possible to replace the drive DVD Bluray for HP Pavilion dv6-6176sx

    Hi all

    It is Possible to replace the DVD Bluray for HP Pavilion dv6-6176sx notebook PC Player?

    Thank you

    Of course it isn't yet very difficult. You just need a BR drive or a drive? The replacement drive will be $80-120, or so, maybe a little less. You can find them on eBay. You can use a generic but that may require a redesign of the front or just get a car dv6-6000 BR on eBay. Trade on with a few screws on the bottom. Get out and drag the replacement. You will need new software to play BR movies, of course.

    Post back with any questions

  • I'm not able to install the Adobe programs in my HP Pavilion dv6 W7 HP

    Hi all.

    I'm not able to install the Adobe, such as Photoshop or Illustrator programs, in my HP Pavilion dv6 W7 HP.

    I installed these same programs on another computer, but on my HP accused the following error:

    "The installation failed.
    Inconsistency in the database of the installer. "

    I tried to install an older version of one of them, to test, and also an error has occurred. The following: Exit Code: 15

    What is going on? And how can I solve this problem?

    Thank you.

    Did you remove all the other Adobe programs of the laptop that you don't use.

    TRY THIS

    Delete the "adobe" folder in C: drive

    For example, Program files "adobe".

    and install again

    Let me know the results

    In addition, THX for the GLORY

  • HP Pavilion dv6-6185tx: could you tell me the bus type of the hard drive (HDD) of HP Pavilion dv6-6185tx

    Hi, I would like to Exchange SSD for my PC, HP Pavilion dv6-6185tx. However, I couldn't find the but type (for example, SATA, SAS, SCSI, or IDE ect...) of this model on the Web site.

    If anyone knew that, please tell me, thank you very much!

    SATA, 9.5 mm or thinner SATA SSD will fit.

  • Qosmio G50 from power (PQG55A-024020) - on board the Board of Directors

    Computer age subject to 18 months starts giving various indications of power supply 3 Aug. DC In light flashing, battery load sometimes and sometimes not, would be put off, computer doesn't end not a boot on the power supply with battery removed.

    Computer limped along for 8 days then failures stabilized. DC in stationary light on plug, battery indicator is "0% load, no charging current". Battery should have about 70% fresh and computer boots properly on the battery. I guess that the on-board power unit is u/s.

    Any comments or advice appreciated. I am currently in journey to the center of the Australia.

    Thank you, David.

    Hello

    If you have an adapter that you can test or a friend, maybe you should do this, otherwise I think that it s mainboard malfunction or something else controls the process of loading. In this case you need professional help form an ASP to get rid of it.

  • Exchange of Board of Directors system T61p

    Hello

    My T61p 6457-CTO unbootable - the usual lights, fan and hard drive start briefly and go out again. What I read in this forum, it is a fairly common problem and indicates that the system or GPU card failed. Remove the different units (dvd player, hard drive, wireless card, modem) did not help, remove the barrette dimm (1 x 2 GB) threw the error beeps expected (2 x 3 + 1 short beeps).

    Unfortunately, the parts search doesn't seem to work for me, but as it has graphics Quadro FX570 and a Merom processeor, I guess the jury is THAT RUF should be 42W7653. These seem a little hard to find, but I was able to get a 42W7652 (with NVS140 graphics) for a reasonable price and I don't care about graphics power.

    My question: can I just replace the 42W7653 for a 42W7652 or is there any incompatibilities with other parts? The screen is a 1680 x 1050 unit, it will work with a NVS140?

    Best,

    Robert

    Please find this table systemboard in the thinkpad - wiki.org German

  • Select the symbol on the artboard and copy the name of symbol on behalf of the Board of Directors art

    I'm generating icons in AI CS6

    I have files WITH 100 work plans

    Some Arts Councils are still empty, just underway.

    On the artboard, I gross and paths on a separate layer called symbols with a symbol only.

    The symbol layer could be the layer is visible.

    100 symbols in the document.

    Now, I want to copy these names for the names of art Council for export and a text box on the art map for an overview of printing.

    I found a script to rename a layer in its content - but it does not recognize the symbols

    I found a script to rename a work plan in a layer

    I found a script to place a text box with the name of Council of art on the art map.

    I can't combine them, please help!

    I can make applescript and Filemaker scripts, but I'm new to Javascript.

    Rename the layer to the content - does not recognize symbols!

    function LayerNameMatch() {}

    If (app.documents.length == 0) {}

    Alert ("No. Open/Active Document Found");

    } else {}

    var doc, i, l, ab, salt, n;

    doc = app.activeDocument;

    for (i = 0, l = doc.artboards.length; i < l; i ++) {}

    AB = doc.artboards [i];

    doc.artboards.setActiveArtboardIndex (i);

    doc.selectObjectsOnActiveArtboard ();

    Salt = doc.selection [0];

    sel.parent.Name = sel.name;

    doc. Selection = false;

    }

    }

    }

    LayerNameMatch();

    Work plan and rename the layer name:

    If (app.documents.length == 0) {}

    Alert ("No. Open/Active Document Found");

    } else {}

    var doc = app.activeDocument;

    If (doc.artboards.length == doc.layers.length & & doc.layers.length == doc.artboards.length) {}

    for (var i = 0, l = doc.artboards.length; i < l; i ++) {}

    var ab = doc.artboards [i];

    AB. Name = doc.layers [i] .name;

    }

    Alert ("completed: \nRenaming work plans to match the names of layers is finished");

    } else {}

    Alert ("OPPS: it won't work!") \n the number of layers and work plans do not match");

    }

    }

    Make a Textbox containing the name of art Council

    This script takes the names of artboard to a document and print them in each work plan.

    Tell the script to operate only on the document open and targeted

    myDocument var = app.activeDocument;

    IDoc var = app.activeDocument;

    ilayer var = idoc.layers.add ();

    ILayer.Name = "0 SeitenName";

    STEP 1: create labels for each work plan

    Grab a hold of work plans

    for (var i = 0; i < app.activeDocument.artboards.length; i ++)

    {

    Board graph var = app.activeDocument.artboards [i];

    For each work plan, add a new text block

    myLabel var = myDocument.textFrames.add ();

     

    fill it with the name of the artboard

    myLabel.contents = artboard.name;

    This line controls the font size

    myLabel.textRange.characterAttributes.size = 12;

    This line positions the text against each work plan

    myLabel.position = [artboard.artboardRect [0], artboard.artboardRect [1]];

    }

    You can use this:

    #target illustrator
    function test(){
        var doc = app.activeDocument;
        doc.selection = null;
        for(var i=0; i		   
  • Can PCI 6602:How I use digital lines of the Board of Directors and at the same time to generate trains of pulses by using a meter?

    Hello!

    My problem appeared when I tried to update my traditional NOR-DAQ legacy code to DAQmx.

    I use 2 meter (meter 5 and 7 meter) on PCI-6602, to generate trains of pulses, as well as the lines of e/s digital port 0 (the form lines from 0 to 7). What I do in my request, it's that I'm starting to generate the pulse train on the output of 2 meters and after that I play with the State of digital lines.

    Traditional, it was no problem to use the meters and digital lines at the same time, everything went perfectly, but in DAQmx, is not possible.

    What's happening: I start generating train of pulses on the output of counters, no errors, but when I try to change the State of a line of digital port the generation of the pulse train is stopped. What happens when I start the task associated with the digital way.

    My question is: is it possible to create a channel on digital lines without changing the channels created for meters?

    Another thing that I managed to do with the panels 'Measurement and Automation Explorer' and Test for PCI-6602, is basically the same thing, I generate trains of pulses on the output of the 7 meter and try to start a job on the digital line, but I get an error:

    "Error-200022 occurred in test Panel.
    Possible reasons:
    Measurements: Resource requested by this task has already been reserved by another task.
    Device: Dev4
    "Terminal: PFI8.

    On the contrary if I use the counter 0 or a counter 1 to generate trains of pulses I encounter the same problem.

    What resources are used by 2 to 7 of the PCI-6602 card counters and the counters to 0 and 1 do not use?

    Thanks in advance for any answer!

    Ciprian

    After doing some real tests on this device, I found that it is a normal behavior for the jury of 6602.  This is because when you start a task digital all 32 lines are configured for digital i/o, so it replaces your meter operation.  The article below the link explains a little more on this subject.  You must start the digital task before the task of counter to use the features of both in your program.

    2 meter and above will not work correctly when you perform digital i/o on NI 6601 or 6602

    http://digital.NI.com/public.nsf/allkb/43F71527765EEC3886256E93006CD00C?OpenDocument

Maybe you are looking for