SWF export problem when you add a new page?

Whenever I have a new page and export my SWF my SWF and HTML load never in my browser. When I delete the newly added page and re-export it loads without problem. What Miss me? I am running what ID CC 2015 update today 23/02/2016.

Looks like the first version is cached in the browser? Try to clear your browser cache or export the 2nd version with a different name

Tags: InDesign

Similar Questions

  • Button with a presentation table of radio when you add a new line

    I have a column that I use as a Y/N flag. I would like to make a group of buttons on the form when the user adds a new record. I use a tabular form, but it seems that it is not possible to use a type of radio for a tabular presentation element group.

    Am I missing something? Is it possible to use a group of radio buttons to an item when you add a new record on a tabular presentation?

    Thank you
    Reid

    Hello

    use the HTML for this in the attributes

  • [JDev 12.1.3] The difference between the Type of Document "Facelets" and "JSP XML" when you create a new page?

    Hallo,

    that is the difference between choosing as a Type of Document "Facelets" and choosing "JSP XML" when you create a new page?

    Which is the best choiche and why? And is it possible to convert a page from one type to another?

    Thank you

    Federico

    Hi Federico

    JSPX both Faceletes are equal to the feature and after Jdev Release11gR2, both are supported in the ADF

    Facelets is deemed be better performance because it is more tight integrated with life cycle JSf and does not need to be compiled before running

    The future speaks Facelets (specification of JSF) and if start you a new project in development with JDeveloper 11 g R2 then we recommend you use Facelets for this reason

    See this good discussion -Diff b\w JSF and JSPX

    Thank you

  • When you add a new site, Keychain prompt for all existing sites

    With 2015 CC update, when I add a new Dreamweaver site, as soon as I hit him "done" once all the ftp information is entered, I get a prompt Keychain for each existing site, I saved in Dreamweaver: "Adobe Dreamweaver CC 2015 wants to use your confidential data stored in 'Sitename-SiteServer 1' in your keychain. You want to allow access to this point? »

    I was well with crossed the first steps, assuming it wouldn't ask me once again, but he does. Every time.

    By clicking on 'Always allow' vs. 'Allow' does not seem to do much, but I don't want to test it a lot because I have to go through 80 + sites every time to see if it changes anything.

    Any experience with this? Is it a thing of access door key or a thing of Dreamweaver?

    The note of the problems at the FTP credentials won't be remembered is NOT my problem. All credentials are stored; I can switch between all sites without problem, or any guest. This happens only when I add a new site.

    Any help would be greatly appreciated!

    Dreamweaver CC 2015

    Screen Retina MacBook Pro mid 2012
    Yosemite 10.10.3

    This will help to get rid of it helps Dreamweaver | Set up a test server

  • Interactive report uncheck filter when you add the new filter

    Y at - it all possibliity to uncheck all filters that are already defined in an interactive report when you create a new filter?

    My first approach by adding a dynamic action that is bound to the search field:

    key_down = event
    jQuery Selector = #apexir_SEARCH
    scope = live event

    The Action contains:
    $('input:checkbox').attr ("checked", false);

    At present, there are 2 problems:
    1. when the user presses 'go' or 'enter' the check box is checked again when the result is displayed
    2. If a filter is defined when the search box is not used, it does not work

    Hi Oliver,.

    too many problems I think. You can try to hack any POST message, analyze it, and if it's p_widget_action = FILTER stop action and interfere with an AJAX to APEX_UTIL call. IR_FILTER or IR_RESET. After the AJAX request was returnd (synchronous), you can start again the original MESSAGE that defines the new filter.

    Hmm. sounds to me like you'd better ask the customer if he is willing to pay for this kind of convenience.

    Greetings from Germany from the North,
    Andreas

  • How to stop Contribute CS5 adding a paragraph when you create a new page via "copy of the current page.

    When I create a new page via 'Copy of the current page', the new page always gets an additional line of code. Contribute CS5 adds a paragraph that pushes my browsing down in the content area of my site. Can someone please help me get to stop this?

    <!--

    Code on the original page:

    < body >

    < div id = "container" >

    < div id = "header" >

    < div class = "logo" > < a href = "/" > < / has > < / div > <! - end .logo - >

    < div class = "navigation" >

    Code on the new page:

    < body >

    < div id = "container" >

    < div id = "header" >

    < div class = "logo" > < a href = "/" > < / has > < / div > <! - end .logo - >

    < style p = "margin-top: 0;" margin-bottom: 0; ' > < / p >

    < div class = "navigation" >


    ->

    If you are going to administer websites > users and roles > choose > change role settings > Editing > paragraph spacing, you put a line or two lines?

    If a line, select the two lines.

  • Why dreamweaver wants to replace my existing css file when you create a new page

    I created a Web site and I can not dreamweaver to accept my existing css file when I create a new page in the same Web site.  I click on file, create new page, I select page fluid and in the lower right, click on the link to an existing css file and click ok, but dreamweaver tells me so my css file does not exist and wants to replace my existing css file? What's happening?

    Thank you guys for this report we

    It's a little surprising that it is the way it is for a while now. Rather than create a fg with the attached css html, DW invites you to create a new css / replace the existing one. Why?

    The part confusing here is that the "css Attach leader"offers two options.

    1. fix like a normal CSS

    2. attach like a css FG

    If you check the preference to "Join as fluid grid CSS" (see attachment) you should not see this question.

    that is, unless you attach the css like a css FG, DW treats like any other css and waiting for you to bind one another css FG

    However, I'm too confused at first until I realized the difference. Hope this helps

    And thank you for bringing this to our notice

    .. Henin :)

  • How you can uncheck "digitally sign messages" when you add a new account? I don't want to use it.

    When I try to add a new account (or even to modify an existing account) "Digitally sign messages" is checked by default and it is not accessible to uncheck

    I check through all my accounts and they have no tick signatures. you were previously signed emails to get the value in the first place?

    Now, I assume that you have no e-mail account that you want to digitally sign messages.
    Go to the menu (alt + T) tools > Options > advanced > general and type in the search box

    sign
    

    You will get a list of entries below, including the .sign_mail of mail.identity.id# where # is a number

    Each account has a number, but are you not signing mail then put all on false is not a problem.

    find one that is set to true, right click and select toggle.
    Close the configuration editor once your done and restart Thunderbird.

    If you sign mail on an account, you will have to go back to the latter for account settings and turn path on any that you have bad out here in the configuration editor.

  • Failed to get the disk partition information when you add the new data store

    Hello

    Update my ESX to version 4 Update 1 (4.0.0, 256968). Now, I'm trying to add a new data store to a cluster in vCenter and receive the following error message when I will review the current structure of the disc "error when configuring the host: failed to get the disk partition information. When I click back, then next, there's no error message but in the formatting window, I get the error "Object reference" not set to an instance of an object.

    I see this question has been asked before, but I can't seem to find an appropriate response. Anyone? The interface using CLI instead of vCenter isn't an option (alignment VMFS, workload and so on)

    I use Dell R900 with an EMC Symmetrix VMax SAN

    The size of the LUN I want to add is 741 GB

    Concerning

    Marius Aulie

    If you have a virtual machine for Windows test, you could do the following, to ensure that the logic unit number has a clean partition table:

    -set the LUN as a GROSS physical to virtual machine device

    -Run diskpart, select the drive and run the CLEAN command

    -detach the LUN to the virtual machine

    -try to create the data on the LUN VMFS store

    The size of the block of the data store where the VM test can be a problem with the above. Due to the size of the LUN, the size of the block of the data store must be at least 4 MB. Attach the LUN to a physical test system could be an alternative.

    André

  • Remove 'default' text characters when you add the new object text (label)

    Is it possible to create a new text object without characters 'text' on the inside?

    In addition, when you convert a rectangle to the text object, you the characters 'text' on the inside. Can you do empty by default?

    Tarek

    Hi Tarek,

    The text object is defined in a Text.xfo file, on my system, it is under C:\Users\BR001\AppData\Roaming\Adobe\Designer\10.0\EN\Objects\Standard.

    You can find the location by looking at the properties of the Group of the library of Standard objects;

    You can also create your own widget, set it up on the design finds out how you want and right click then 'add to library' (option has moved, but that's what SS3).  But I don't think you can get your own ones will appear in the drop-down list when you try to convert objects.

    Bruce

  • In vSphere 5.5 customer web, when you add a new HARD disk, cannot create as thick.  Gray disk provisioning.  No one knows why this happens?

    In the vSphere web 5.5 client, which is now where he should go to add a new HARD drive when you upgrade the VM version to 10... When I add one, I do not get the option to change the disk configuration.  Any ideas as to why?  It is an engine out of VM, with no snapshots:

    vsphere55_newhdd_thinthick.png

    The virtual machine lives on a NFS datastore with no HW accel. ? If so, that would explain it.

    / Rubeck

  • RH7 Se blocks when you add a new topic

    I use RoboHelp 7 (which is not part of the TechComm Suite). I created a new project of WebHelp and created the template and. CSS file from scratch.

    Whenever I have add a new topic for the project, it hangs for a minute and then crashes. When the project is reopened, the new section was created successfully but must be imported so that it appears in the list of topics. The model uses a table to hold the information in the topic.

    I have looked around and could not find any similar support help topics. Copy us the files from RoboHelp since the network, they are stored on working on it on our office because it's much faster.

    Also, while I'm here, we also face accidents with our clips where it crashes soon enough the post-importation excerpts from code and the reopening, the excerpts are gone, and we have to re-import them (if they are still in the news, as a blank line). I saw a similar help on this issue topic, but have not yet found a solution for it.

    I'm sure there are a few essential information that I'm leaving out, but I can't think of it right now.

    Thanks for your help!

    I am sure that the problem is that the template file is somehow corrupted. I finished by recreating the model in a new HR on my local machine and copy on the CSS file and it seems to be fine now.

    We will ensure that we do all our changes to the HR projects on our local machines in the future.

  • How to set a default in an ADF table when you add a new line

    Hi guys,.

    I have a view object which I use to create a table of the ADF. I also have a button that uses a CreateInsert link to add a new row to the table. I have four fields: created_by, creation_date, last_update_by and last_update_date.

    I want these values to be set automatically when I click on add new rank.

    I want the following values:

    created_by - admin
    CREATION_DATE - sysdate
    last_update_by - admin
    lsat_update_date - sysdate

    Any suggestions on how to proceed would be appreciated

    Thank you
    -Mark

    brand,

    These four fields can be defined completely declaratively in the Entity object (check the service history Colum). Copied from (11 g) documentation:

    If you want to keep track of the historical in your entity object information, such as when an entity has been created or changed and by whom, or the number of times that the entity has been modified, you specify an attribute with the selection of historic column (in the Edit attribute dialog box).

    If an attribute data type is number, string or Date, and is not part of the primary key, you can then enable this property for your entity automatically update the attribute for the audit of historical value. How the framework handles the attribute depends on the kind of historical attribute, you specify:

    * Created the: this attribute is populated with the timestamp of when the line was created. The time stamp is obtained from the database.
    * Created by: the attribute is populated with the name of the user who created the line. The username is obtained using the method getUserPrincipalName() on the Session object.
    * Modified the: this attribute is populated with the time stamp whenever the row is updated / created.
    * Update by: this attribute is populated with the name of the user who creates or updates the row.
    * Version number: this attribute is filled with a long value that is incremented whenever a row is created or modified.

    John

  • When you download a new page, the page will move upwards a little, revealing the same page as, and then will go back down and full download.

    I have Windows 7 32 bit, Firefox 19.0 when I click to go to another page, sometimes the current page will move upwards a little, revealing the same page under. After a few moments, the current page will move down and then goes to the new page and download.

    Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...

    Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  • Page numbers need to change automatically when users add a new page to a form fillable

    In the headers and footers, I chose < < Page 1 of n > >. My form is a long page, but I have a button that allows you to create a second page if the user needs. However, if a user decides to create a second page, the footer does not '1 1' '1 of 2' on the first page and then "2 of 2" on the second page. "" Instead, the two say just '1 1'. How can I change this so that when users add new page, it changes the numbering?

    Thank you!

    This would require the use of a script that generates the page numbers

    automatically whenever the file is loaded or saved.

Maybe you are looking for

  • BT Homehubs... AAARRRGGGHHHH

    Exasperated, is a Word to describe how I feel... but directs them to the CabSav Wolfblass, must so fluffy soon... I think I have another post similar to this elsewhere in this forum, so bear with me... I already had a BT Homehub 1.0 (circa. 1960' ish

  • Secondary links won't work. Also puzzle in gray.

    Example: creating a card from American Greetings. I can't get past step 1. When I click on step 2, nothing happens. I get sent to my mail everyday Jigzone. Each puzzle is grayed out and will not work. This looks like a Java problem, but Firefox will

  • How to import cookies from an exported file in IE

    Cookies can be imported into Firefox directly to a ".txt" to IE file? (IE bookmarks 'Favorites' file came in fine). I'll put up a new Linux and don't have / want IE top, so the ability to import data from another browser is not much help.

  • How can I diagnose CreateProcess error 740

    Windows Server 2008 R2 I have an application (closed source) which works fine when I turn off UAC. But apparently it's not ideal... A procmon says nothing - it loads just ntdll apisetschemea before stopping, without even trying to look at any other f

  • Domestic issue of networking

    Both of my computers are running Windows XP and are both on my home network through a Linksys router.  The router is connected by cable to my desktop and my other computer which is a portable computer is connected to the wireless network.  Regarding