Switch Acer 10 nothing will come on the screen
my switch 10 acer screen would turn but nothing he will have dark after that I took in and not just light stay would appear on button / stop? What should I do to get it to turn on?
connect the AC/DC charger, then try a pressure hold button power + Volume HIGH (about 40 to 60 seconds). If he succeeds, that it will boot to the BIOS, exit without saving the changes and it will boot to windows.
If it does not start and you are under warranty, it's time to call Acer support service.
Tags: Acer Desktops
Similar Questions
-
I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode. Startup Repair is unable to repair. She argues that the onus of a BadPatch.
Startup Repair shows the following:
Problem event name: StartupRepairV2
Signature of the problem 01: external Media
Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
03:6 problem signature
Signature of the 04:262148 problem
Signature of the problem 05: BadPatch
Signature of the 06 problem: BadPatch
Signature of the problem 07:0
Signature of issue 08: 1
Signature of the problem 09: SystemRestore
Signature of the problem 10:0
OS version: 6.0.6000.2.0.0.256.1
Locale ID: 1033Hello
I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
not tighten, effectively remove and replace them with care.Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.
By manufacturer diagnostic utilities
http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
SpeedFan
http://www.almico.com/sfdownload.phpHD Tune
http://www.hdtune.com/----------------------------------------------
If necessary:
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.You can use another DVD that are not protected but you will need to copy you have the product key.
On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlNo new chances.
Rob - bicycle - Mark Twain said it is good. -
When I download a game it will not work the screen just keeps on changing color and color stripss
When I supported a game it will not run the screen just keep changing colors and strips coloued
Hello
Please try to install the game in compatibility mode. Here is some information that can be very practical...
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
-Check the functionality of the game under a spare user account
Uninstall/reinstall the program
-Clean Boot http://support.microsoft.com/kb/331796
I hope that this information is beneficial.
Thank you
Aaron
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I have troublle with moving my emails from the Inbox to a folder? I also extend my screens whenever it comes to the screen upward? Please help me * address email is removed from the privacy * I told my son I would have a computer on which I could get online and with a program I could throw my pearls inventory.
but when he brought to me he forgot to put windows one. He put the express window and gave me the internet. I had to go out and find free programs to do the inventory and other things. It's good, but I have trouble with the above two questions. Can someone help me?
- What e-mail program?
- What is a Windows?
- What is Windows Express?
Any window that you want to resize all the time must be the last closed window.Take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program. -
Nothing will not read the DVD/RW
I have a desktop gateway DX430S with windows vista Home premium 32-bit. The DVD/RW will be isn't anything read or burn CD when I go into Device Manager and check the driver, I get the following error message:
Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 37.
I tried to update the driver but it had no effect and uninstalling and restarting had no effect.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Airpod will come in the same package with iPhone 7 in October?
I heard they arrive in October, but they will come with iPhone 7 in the same package? I will be able to choose between Airpod and EarPods?
Hello
No - Airpod are a separate purchase.
EarPods (wired, with lightning connector) are provided with the iPhone 7 and 7 more.
-
I have two monitors and Firefox will not come on the screen.
When I try to open Firefox it will not load on each screen. Looks like he's trying to go to the secondary screen, but is not visible. The OS is Windows 7 Home first Service Pack 1. Firefox version 37.0.1
Thanks for your help.
JerryYou get a sticker or other indication on the Windows task bar that there is a window of Firefox "somewhere", but it is not visible anywhere?
If there is a tile (or a title of the window above the Firefox button in the task bar):
The Firefox window sometimes opens off screen. If you have a multiple monitor configuration, make sure that both monitors are on. Other users have reported that sometimes Firefox acts strangely while the second monitor is turned off. You mentioned that both monitors are on in your case.
In all other cases: you can often force the Firefox window is displayed on the screen by double clicking on the thumbnail image just above the taskbar and choose expand. Does it work?
A possible cause for this is that the file that stores the positions and sizes of window is corrupt.
#1 method: If you can get a zoomed window:
Open the settings folder (AKA Firefox profile) current Firefox help
- button "3-bar" menu > "?" button > troubleshooting information
- (menu bar) Help > troubleshooting information
- type or paste everything: in the address bar and press Enter
In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.
Leave this window open, switch back to Firefox and output, either:
- "3-bar" menu button > button "power".
- (menu bar) File > Exit
Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.
Launch Firefox back up again. Windows normally appear again?
#2 method: If you can not get a Firefox window for all:
Close Firefox by right clicking the icon in the taskbar > close all windows.
Using the Run dialog box (windows key + R) or search from the start menu (bar (or, in Windows 8 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder):
%APPDATA%\Mozilla\Firefox\Profiles
Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.
Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.
Launch Firefox back up again. Windows normally appear again?
-
Re: Satellite P200-13Z is on but nothing comes on the screen
When I turn on my laptop the lights come on as usual and you can hear the fan but nothing cames up on top of the screen.
Then a little light orange on the cd from the drive that lights up but I do not have a disk in itDid you perhaps updated RAM modules?
-
After RAM upgrade Satellite P100-222 is on but nothing comes on the screen
Hi all
could you please help me?I have to update my 2x512Mb in 2x2gb RAM modules.
If a module (2 GB) installed - it's ok.
If two modules (2 gb + 512 mb) installed, total RAM 2.5 - it's ok
But if two modules (2 gb + 2 gb) it does not work :(
When I turn on my laptop the lights come on as usual and I can enter the BIOS but after installation of the screen nothing cam upward on.RAM SO-DIMM 2 x 2 DDR2 SDRAM Kingston "ValueRAM' KVR800D2S5K2 modules / 4G (PC6400, 800, CL5)
Hello
These things happen usually when you try to use memory modules live not compatible.
I checked the page of Kingston and Toshiba and modules of 2 GB compatible for your laptop modes are:PA3513U-1M2G (memory 2 GB DDR2-667 Kit) or
Kingston KTT533D2 / 2G 2GB 533 MHz ModuleGood bye
-
nothing comes on the screen but I can hear the game.
nothing appears on the screen but I can hear the game, it's just a blank black screen.
Hi TiaBurt,
(1) what version of operating system do you use?
(2) game that you are trying to read?
(3) have you been able to play the game earlier?
(4) you are able to play games without problems?
First and the best suggestion for now would be to uninstall and reinstall the display updated the manufacturer drivers.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
Retrieve information for assistance
Varun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
seriously damaged 6s - Apple iPhone screen will replace just the screen?
So, I got a new 64 GB iPhone 6 in September last year because Verizon forced me to upgrade my old 5 c. I had initially purchased AppleCare + under the pretext that the policy CA + had not changed and that if damage were to occur on the screen that they would replace the screen for free. I bought a case for the phone and before the case had arrived, I had already managed to break (we're talking a timespan 2 day of all that happens, unfortunately), and when I called to make the appointment to take in what I thought would be a free replacement, they informed me of the new fees of $79. Well, I was pretty mad because I had already paid $100 for AC + and then pay an additional $79 seemed ridiculous because they were customer support without AC $109 + for a new screen. The math doesn't add up, so I got a partial refund of my AC + and never got the screen fixed and lived with the crack. Well long story short the screen is now completely broken through my 11 month old and I can't use it at all - you can barely see through the glass falling pieces, and the screen itself does not. Can someone tell me if yes or not it simply a replacement of the screen or I have to buy a phone brand new? And if she's going to be the last, I'm not keep the phone, I am trading it back in because we are switch from Verizon to AT & T - I can take it for a 3rd rep party to get a new screen and still get trade in value of the phone? AT & T is simply that it is y no cracks in display political and joins the local cell phone repair, so I guess that Yes on the second part of this question.
As long as there is no additional damage on the phone itself you can get the screen replaced but if the case is damaged, you will need to use your franchise under AppleCare + as an alternative to the iPhone.
-
Portege M700 will not change the screen orientation
I installed the driver for the webcam for the M700, and every time I install it, I get the same error message:
"Open Webcam driver fail - please restart camera or computer."
I reinstalled the drivers of many times, and it still does not work.
Therefore, I tried the msconfig method, disabled all the startup process and then reactivated their.
The webcam shows the same error message, and now the screen will not change orientation when I rotate the screen.
You try to use Windows XP Home edition or what? Generally, each laptop comes with preinstalled and configured operating system.
-
Windows will not update the screen resolution and the color depth
Out of the blue today, my Windows XP installation had its color depth and screen resolution back to the lowest setting and whenever I try to update it refuses to put up-to-date.
I even try to restart my computer and a bubble appears downstairs offering reset the color depth and resolution to my automatically. When I click, it appears as if he's trying to return to normal, but again once nothing happens - the colors and the screen resolution is still at the lowest setting.
Can any ideas on how I fix?
Hello
Here are some things to try to fix it.
Change the screen resolution.
"How the resolution screen on Windows XP"
http://pcsupport.about.com/od/Videocards/HT/screenres.htm
You can also right-click on an empty desktop > properties > settings > it the slider bar allows you to increase the resolution > Apply > OK > agree in the next window, etc.
If that fixed it, have damaged you graphic drivers.
Access the site on your computer or the manufacturer of the graphics card > look for a driver download Section > search for your model number and operating system > get graphics / video / Chipset Drivers (depending on how it is formulated) > download and install.
Change the screen resolution.
You can also try a system restore before all these problems started:
"How to use System Restore in Windows XP"
http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-XP.htm
See you soon.
-
PC will not BOOT, the screen shows a KEYBOARD FAILURE
I turn on my PC after a power failure and a black BACK asdisplay ports KEYBOARD USB FAILURE.the States have the power, the keyboard works, but I can't seem to BOOT without a keyboard menu. If anyone has any idea I'd be grateful!
I tried to reinstall Vista CD, nothing happens. I might note that the screen don't stae stop Thremal occurred.
Thanks again!
Stu
reply in this thread
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
HP Split will not calibrate the screen
I had a HP Split x 2 13 summer try to calibrate the screen for more than 2 days now and still have the same problem, departures from the screen upside down (touch top low clicks) but works completely (all the corners and excellent angles work) after the first parts of calibration of the edges to stop responding when you perform the second calibration its almost impossible due to finish the screen will not click on edges of the screen
Anyone had this problem before and how you guys solve this problem?
Hello Luis,.
Thank you for writing to us, we are happy to help Microsoft Community.
For the question with the screen upside down, press the Control, Alt and high at the same time.
For more information about calibrating monitor for the HP device, you can refer to the section "comes a touch close to the touchdown point, not at the point of contact" in the link provided below.
HP TouchSmart PC - troubleshooting problems of touch screen in Windows 8
I would ask update you the drivers of graphics from the link provided below. Download and then install the latest drivers for graphics from the link provided below.
Drivers HP Split 13-m010dx x 2 PC
Hope the helps of information provided. Do we know the State of the question, so that we can help you further.
Maybe you are looking for
-
HP PAVILION NOTEBOOK 14-N012AX: Windows 10 upgrade error 80080005 0 x - 0 x 90016
I have problem while I was going to improve my laptop windows 8.1 to Windows 10. Indeed, it appears an error which is the error code 0 x 80080005 - 0 x 90016. Please I need help, I really want to upgrade my Windows 10 computer that has many interesti
-
Need expert advice on the a4tech wireless mouse
Lost the Nano - receiver Usb mouse A4tech G9 557fx, can I use my bluetooth usb 3.00 device other than the desired mouse receiver. Because they both have the same air.
-
Add additional Apps to a machine with device license.
Hello. I work for a local school which has approvals for Adobe Applications. They have a license for all applications available, but most of the applications is not used. This does not, however, mean that some of them will be needed in the future.
-
Hi all..I am completely new to this technology... I think that GL is the same as Oracle apps, which is the same as the EBS...Any book that you would recommend for me to start from scratch.Concerning
-
I got a lot of creative cloud including Lightroom. I think buying a Lenovo Ideapad for treatment when traveling. It is a 32-bit system of Windows 10. I'll be able to get an older version of Lightroom on my package? for example, 5