switch between tabs is no longer possible after update

Similar Questions

• Version 5.0 on a MAC doesn't let me switch between tabs. Can I open a new tab, but when I try to go in a different tab, it shows me just the content of the tab opened most recently. Help!

  Version 5.0 on a MAC doesn't let me switch between tabs. Can I open a new tab, but when I try to go in a different tab, it shows me just the content of the tab opened most recently. Help!

  In addition, pop up blocker works for a while and then stops working. I have to close and restart Firefox to make it work again. Help!

  I had the same problem, but with Firefox 4.0. My first thought was last updated to Firefox (after of course restarting FF), but it did not help and I had the same problem.

  Among others, I had an extension installed and enabled called tile tabs 4.10 I thought could easily create this problem. I went in my Add-ons Manager and disabled, restarted Firefox and tabs worked properly again. Unfortunately, the extension of the tile tabs is my favorite Firefox Add-on and I use it almost every day to manage my web tasks. I went to the page Add on for tile tabs and saw that there was a notice that version 4.10 did not work properly on Mac OS and install version 4.9 of the extension. I saw that they had a new is not-yet-seen version 4.11 who has tackled the problem of Mac OS, installed, and everything seems to work properly.

  I have no idea why all of a sudden I had this problem as I don't had not updated Firefox or the extension of the tile tabs recently. Also, obviously this could not solve your problem, especially if you have the module installed and active. But our problem started at the same time for both of us it seems based on your post time, so its probably not a coincidence.

  But its worth a quick glance and you can check other extensions if you don't have the legs of tile that might be the cause of the problem.

• How to reset the content when switching between tabs

  My use case, is that I have all of the multiple tabs displayed in the sidebar. The content of the tabs each has a title bar of free-form which is scalable. If lets say on tab 1, the title bar is developed, and then when you go to the tab 2, is it possible the collapse of the State of the title bar in tab 1 expanded. Or when you switch to tab 1, is it possible to reset the State of the title bar - meaning collapsed.

  I tried all possible solutions, such as the resetExpanded() or use of the definition of the extended property to false dynamically but no work.

  The only thing working is while I'm in tab 1, I develop the title bar while in the same tab, if I perform any other action, I could run resetExpanded() but that's it. Outside tab 1, as in the QML who has the tabbed pane, listening to side bar changed state events, events to change active tab etc., none to take effect.

  There is no ID for the expandableArea so I couldn't get to the extended property that I could create an Alias for.

  Also the unique ID that gets me access to the resetExpanded() is the ID of the

  FreeFormTitleBarKindProperties, and that's how I'm able to do the

  ID.expandableArea.resetExpanded () BUT that I couldn't create an Alias for this FreeFormTitleBarKindProperties because it is not to be an alias of an identifier is valid.

  So I don't know how to solve this problem, unless there is a way to destroy the contents of the tab whenever I switch to a different tab, but it is very inefficeint and suffers poor performance.

  Any ideas anyone how to solve this problem. Appreciate your help.

  Finally, I was able to solve it!

  Originally I had the game content tab statically at the beginning in the tab "as

  Before:

  Tab {}

  {somePage}

  }

  }

  After:

  Now, I created somePage using ComponentDefinition and assigined the content of the tab as

  tabbedPane.content = somePage, followed by all the properties of customization that I send to somePage

  Now in TabbedPane, I listen to two events below

  onActiveTabChanged: {}

  resetTabContent();

  }

  onSidebarVisualStateChanged: {}

  resetTabContent();

  }

  resetTabContent - calls the function

  function resetTabContent() {}

  mainPane.activeTab.content.resetDropDown ();

  }

  The resetDropDown() function is globally on all aspects for the TabbedPane

  {functionresetAccountsDropDown()}

  contentArea.expandableArea.resetExpanded ();

  }

  where contentArea is the ID of the kindProperties of the title bar

  {Page}

  title bar: title {} bar

  ID: pageTitle

  scrollBehavior: TitleBarScrollBehavior.Sticky

  type: TitleBarKind.FreeForm

  kindProperties: {FreeFormTitleBarKindProperties}

  ID: accountsArea

  {Of container

  }

  {expandableArea}

  }

  }

  }

  }

  Enjoy!

• Can I use horizontal scroll to switch between tabs?

  I find it useful to switch between tabs with the side-scrolling my mouse wheel. Can I configure Firefox in this way?

  Apparently FireGestures doesn't support scrolling directly if you can't make it work. I have no local way to test it, because nobody doesn't know I have a mouse with a horizontal scrolling. FireGestures provides alternatives (I use the tab scrolling of line), however, and supports scripts , if you want to try to use the technical information provided by cor - el.

  One avenue would be to use the mouse like Logitech Setpoint or Microsoft Intellipoint software to set the scrolling to run the FF Ctrl + PgUp and Ctrl + PgDown hotkey combo. This would negate native scroll, however.

  You can leave your comments at https://input.mozilla.org/en-GB/feedback/ if you do not want to see this feature implemented. I think you're better of trying to get an add-on to do this though, as horizontal scrolling appears to remain a characteristic very niche.

• Favicons repeat through tabs, behind the label text when you switch between tabs. 37.0.1 sometimes the Green scroll bar does not have too

  Please mention the attached JPEGS. When I switch between tabs, favicon image repeated behind the text. In some cases, the image of the vertical scrollbar is messed up, it cleared up when I click on it. -Does not appear to affect performance, simply annoying. Thank you!

  Please temporarily disable your Avast extension to see if it has to do with it.

  Try Firefox Mode without failure:

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Why gesture to turn on my trackpad behaves not as before for switching between tabs when it works the same with all other programs besides Firefox?

  Why gesture to turn on my trackpad behaves not as before for switching between tabs when it works the same with all other programs besides Firefox?

  I changed the subject: config to make the rotation gesture to move between tabs and it worked great for well over a year. It now behaves properly, as described here:

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=877598

  It used to be very controllable move a tab on, now it is erratic and moves quickly and the unexpected tabs regardless of the slowness, I do the gesture of rotation. It's the main reason I use Firefox on Chrome and I will continue to do so unless there is no solution for this.

  Just put the browser.gesture.twist.threshold to something around 15-25.

• Is my computer crashes, is unresponsive at times and I can't switch between tabs.

  original title: my computer is too hung up, I can't switch between tabs. And that it become desensitized. (not a case of virus) Help, please!

  My computer became very slow over the past days. Its suspension too, Chat boxes are not open, I am not able to open one of the windows in the first time as it says "this window is not responding." ... Its not a case of Virus I have activated my quick heal Antivirus. I have windows 7 ultimate. One last thing I want to say is that I recently downloaded a theme Android and installed... Now when I start my computer... The Android robot appears instead the original logo of Windows 7... The taskbar went on top of the office and there are also a few other changes. I tried to change it theme several times but it didn't work. I even deleted the installed theme in C/Program files. Still, it did not work. My PC config
  Intel Dual Core processor E5200 @2.50 GHz
  1.00 GB OF RAM
  OS - win7 Ultimate 32-bit
  Windows - 2.4 experience

  Since you clearly said that there was no problem on your computer before the installation of the android theme, you can try to start the computer is safe mode.

  at the time of startup, press F8
  When the boot selection menu appears, select Safe MODE
  Log in to windows and uninstall or disable your theme android
  restart normally

  or
  make system restore to the day before your current problem.

• URL Bar Search no longer works after update and no research options available!

  URL Bar Search no longer works after update and no research options available!

  "URL Bar Search" which is an extension? Or are you referring to the address bar, sometimes called the address bar?

  Let's try a few basic trounleshooting.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click on the menu button , click Help , and then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  Let know how's going on.

• Combustion chamber is very slow when switching between tabs, the legs more slowly, he gets, switching between the windows of Firefox is almost instantaneous.

  In this case all that is display of each tab. For example, if I open it, say, 8 new tabs by default it takes about 5 seconds to switch between them, although all that they show are links to my sites top of page 9. I also noticed a new tab opening takes more time more I already opened. The problem is particularly well with the tabs. Navigation is not just slower than usual and as I said above, switching between Firefox Windows in not affected.

  If it works in Mode safe mode and normal mode with all extensions (Firefox, Tools/menu key > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via * button '3-bar' menu > exit (Power button)

  • Windows: File > Exit
  • Mac: Firefox > quit Firefox
  • Linux: File > exit
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Tab control: chart automatically resets when I switch between tabs

  Hello world

  I'm having a problem with a user interface. : mansad:

  I use a tab with two tabs control to switch between the two graphs. A graph shows data from a production machine (tab 1), the other a data from a measuring probe (table 2). Now, when I switch from tab to tab 2 1 and return, graphic of tab 1 is empty and begins to show the data from the moment of return too tab 1. Tab 2 data are not reset, but are constantly updated, even when the 1 tab is open. I'd like to tab 1 to behave like tab 2. It must be constantly updated even when tab 2 is opened and the data should not be reset after between tabs.

  Making machine is connected via a server (Data tab 1, Figure 1), the data from the probe are written a queue and comes from (Data tab 2, Figure 2). It's all part of the main VI. This part is shown in Picture 3. Here, historical data are reset to zero when the program ends. But I can't understand why it does not work as I want.

  Can anyone help?

  Thank you!

  

  OK, there are very strange things happening here, in addition to the problem you are having (which, I admit, I don't see yet why you have a problem).

  First of all, I've never met such a structure of strange and deeply nested directory for LabVIEW code as what you posted: Users\AB\BC\CD\DE\EF\FG\GH\HI\IJ\.  Why in the world you have an empty stack of sense files / directories to go?  Very, very strange.

  You view multiple charts using waveform graphs.  Do you, indeed, assemble an array of waveforms to display on the chart, but the waveform consists of a single point, 'built' in a table, with a current timestamp as t0.  Instead of going to all these efforts, you can simply group your data points in a Cluster and show that.  Your X axis will not display "Time now", but if you know the sampling frequency, you can adjust the X scale so it displays 'Time' in practical (such as seconds) since the beginning of the sampling units.  Note that you already have one such cluster (at least in the reading process data - the data output Process value - which can be connected directly on the diagram of fluid bed without the need of the Signalverlaufsdiagramm).  It could, in fact, "fix" your problem (but I'll let you test this).  You will need to do a similar Cluster Bundle in sight Parsum data and output the cluster instead of the table in order to test this idea.

  Bob Schor

• Why Firefox will allow me to have several tabs, but not allow me to switch between tabs and can only watch a new tab when closing the previous?

  Everytime I open a new tab, it appears on the tab bar where it should, but if I click on it nothing happens, the tab does not open, and I can't switch between multiple tabs. The only way to get a new tab is to close one on that I am currently, and even then it will only open the next tab in the order of precedence, so I can't even choose which tab is next to see. This problem makes it impossible to use firefox as a research tool that requires quick change back and forth between pages in multiple tabs at the same time.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• There at - it a keyboard shortcut for: a) switch between tab groups? (b) pass a correspondent of Panorama search results?

  (a) between tab groups would improve my workflow. Like Alt + (shift +) Tab to move to the next/previous Cmd + shift + W/R tab would be another possible option next to the Cmd + Shift + E to Panorama.

  (b) when the research in Panorama tab between results would be great.

  Try:

  CTRL + '

  I had to search for a good while to find it on a web page of non-mozilla. Don't know why mozilla is not properly document this on this page of keyboard shortcuts:

  http://support.Mozilla.com/en-us/KB/keyboard%20shortcuts

• Why is there a second (new) tab, you can not delete after update to 6.02?

  I am running Windows XP. After updating to Firefox6.02 a second tab was there after my 'Google' default tag. The second tab contains the words "New Tab" on this issue, and when you click the 'X' button in the tab, it does not close. When you go to for closing of Firefox a warning window/box will appear to tell you that you have 2 tabs open and asks if it's ok to close. I thought that there is a problem with the update. So I uninstalled Firefox and then re-installed. Same thing happened, 2 tablets. Any ideas?

  It is possible that there is a problem with the sessionstore.js and sessionstore.bak files in the Firefox profile folder.

  Delete the sessionstore.js file [2] and sessionstore.bak in the Firefox profile folder.

  • Help > troubleshooting information > profile directory: opens showing the file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  If you see files sessionstore-# .js with a number in the left part of the name as sessionstore - 1.js then delete those as well.
  Delete sessionstore.js will cause App Tabs and tab groups and opened and closed the tabs (back) to get lost, so you will need to create them again (take note or bookmarks).

  See also:

  • [1] http://kb.mozillazine.org/Session_Restore
  • [2] http://kb.mozillazine.org/sessionstore.js

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Location (GPS) service no longer works after update of Os 9.3.2

  My GPS service does not work after update os on IPHONE 6 64 GB. Deleted, hard reboot as well os re - load os, I did, but still unresolved question and google Mao or Apple card does not. It seems that many Iphone user have the same problem after the Os update to 9.3.2.

  My wife also have the same model and updated to Os, but its Google map works perfectly. have online search of dome on the solution, but no luck.

  How to solve this problem?

  Hello, jayantg,

  Thank you for using communities of Apple Support.

  I see that your GPS service stopped working after the update to iOS 9.3.2. I use location Services on my iPhone, so I know how much it is important that we get this problem is solved. I have something I want you to try.

  Job to the subject of privacy and location Servicesand ensure that the location service is enabled and learn how the precision of GPS to improve, in particular, these two sections:

  Enable or disable location Services

  You can enable or disable location Services in settings > privacy > location Services. You can enable location-based Services during the wizard process of installation or later through the creation of location-based Services. You can individually control applications and system services have access to the data of location Services. When location Services are disabled, the apps can't use your position in the foreground or background. You will thus limit the performance of various Apple and third-party applications.

  

  Settings > privacy > location Services.

  

  Settings > privacy > location Services > System Services.

  Improve the accuracy of GPS

  GPS accuracy varies according to the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. Follow these tips to improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
    Important: Incorrect settings on your computer can sync to your device. Check the date, time and time zone on a computer that syncs with your device.
  • Restart your device.
  • Make sure you have a cell phone or Wi - Fi network connection. This allows assisted GPS (A - GPS) on the device to locate the fastest visible GPS satellites, in addition to providing information about the initial location using Wi - Fi or cellular networks.
    Microcells (sometimes called Femtocells) are not supported with location Services.
  • Keep a clear view of the horizon in several directions. Please keep in mind that walls, vehicle roofs, tall buildings, mountains and other obstacles can block the line of sight to GPS satellites. When this occurs, your device will automatically use a Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  All the best.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!