Switch (incomplete) of modeling in the switch


is it possible to model a matrix of NI Switch Executive switch where NxM (bus line) not all combinations are possible/allowed?

IviSwtch-drivers, you must create a matrix of connection, which defines the available and not available points to a switching switching matrix (see How to develop a compatible driver IviSwtch for use with National Instruments Switch Executive).

for example a switching device (matrix) where each channel can be connected to 2 bus lines

R0 r1 r2 c0 c1 c2 c3 c4 c5
R0 x x x 0 0 x x x x
r1 x x x x x 0 0 x x
r2 x x x x x x x 0 0
c0 0 x x x x x x x x
c1 0 x x x x x x x x
c2 x 0 x x x x x x x
c3 x 0 x x x x x x x
c4 x x 0 x x x x x x
c5 x x 0 x x x x x x


OK, what makes simple (or I think). The logic of routing by device is the responsibility of the IVI driver that the Executive switch uses to log in/out of the roads. NISE makes no assumption on the topology of your device - it reads the channels and possible applications of connections using the IVI instrument driver. So if you implement these restrictions in the instrument driver (as you well pointed in screenshot of your original message of the matrix of connection), then switch will only be able to establish these links.

My comments on the use of exclusions were to switch create these restrictions when the driver underlying instrument incorrectly neglected to do.

I hope this makes sense.

Tags: NI Products

Similar Questions

  • Help! Dreamweaver keeps automatically 'putting' my model on the server every time that I save it.

    For some reason, Dreamweaver retains automatically 'putting' my model on the server every time that I save it, replacing the model that was originally there and I don't know why. It is never used to do this, and all my other sites work fine and do not have this problem... I don't want that to keep overwrite files I have on the server... does anyone know how to stop him from doing this you? I would greatly appreciate any help that anyone can give.

    If it helps, I'm using CS4.

    Thank you


    Ok.  It looks like an incomplete installation.  Nevertheless, DW think that you have a local test server.  Every time that you save the files, he put copies in your C:\Users\Catherine\Pictures\tailormadeart folder.

    Except if you create dynamic web sites that use databases and scripts server side, you don't need a test in DW server.  All you need is a Local site and your remote server.

    For static HTML sites, I recommend you remove or clear the definition of testing server.  See screenshot.

    Nancy O.

  • I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?

    I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?  Which button or buttons use?

    Is not possible. You'll need to use the Apple TV remote to turn it off.

  • Is it possible to organize the "My models" in the the for the evaluation version of Pages?

    Is it possible to organize the "My models" in the latest version of Pages for the latest version of El Capitan?  I would like to organize patterns that I create in folders that was available in many earlier versions.  I would consider even install some software to do this.  Thanks for your thoughts.

    Pages v5.6.1 supports only the folder my models. It does not support peer model files, model external Pages or subfolders at the location of the folder my models. It is a departure from Pages ' 09 v4.3.

  • Can you determine the model of the iPad with DK S/N * VD2?

    Can you determine the model of the iPad with DK S/N * VD2? I've upgraded to a newer iPad and need to sell the former. He reconnects with the default status, and I would go instead through the installer to get this info.

    < personal information under the direction of the host >

    Go to settings - general - about - Scroll down - must be model number


  • need an exact model of the PCI communications controller driver

    Mr President.

    my model is G62 B39 SE




    PCI\VEN_8086 & DEV_3B64 & SUBSYS_1439103C & REV_06

    PCI\VEN_8086 & DEV_3B64 & SUBSYS_1439103C

    PCI\VEN_8086 & DEV_3B64 & CC_078000

    PCI\VEN_8086 & DEV_3B64 & CC_0780

    Please I need an accurate model of the PCI communications controller driver


    It's a system driver wise called "Intel Management Engine Interface (MEI) ' as mentioned in the following link:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-83746-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5040732 & sw_lang =

    Please download the exe on the link above and install on your machine.

    Kind regards.

  • What model is the iPhone Unlocked sim-free 6 s, model 1633 or 1688? The locked phone can be unlocked and used on any sim

    What model is the iPhone Unlocked sim-free 6 s, model 1633 or 1688? The locked phone can be unlocked and used on any sim?

    If the iPhone is locked: only the provider it is locked, can unlock.

  • [Solved] G505 all models even the motherboard and cooling solution?


    I want to improve the APU in my notebook G505.

    Because of the tdp of my favorite APU is higher, I wanted to know if all g505 models have the same motherboard and cooling the installed solution.

    Same CPU - Z cannot tell me a lot about my current motherboard.

    Thank you & welcome,


    Here are the compatible devices for g505:

  • Output of the model to the user of controlled output

    I have a simple model acting on AO1 of my system that generates an analog output of material on channel 1.

    Sometimes I want to stop the model (no break, but stop) and a user interface acting directly on the AO1 via a control. For this, I use the Value.vi of single channel defined in the API Veristand. The channel is defined as targets/HILRT2/material/chassis/DAQ/Dev2/Analog Output / AO1 (1), as it should, in my view, but for some reason, the

    It is not generated output...

    Outputs from the model are also connected to target/HILRT2/material/chassis/DAQ/Dev2/Analog Output / AO1 and I wonder if (1) and (2) are not not incompatible...

    Somehow I would like a way to easily change the control to a particular production of a GUI control of model output, or get the model of the road if necessary.


    PS: VS2011, LV 2011

    I see.

    You can use the definition of system API call 'get the mappings' for a list of mappings.

    If you don't know what sysdef is running, you can use the API to run, call to get the State of the system and even to get the available channels.

  • How can I get the serial number and the type of model of the target, I inserted in the pc


    I want to find the type or model of the usb card of nor and the serial number of this one when I connected to the pc.

    But how can I do? can someone help me?

    I did something, but the same error apears when I executate it!

    Thank you!

    Try the attached VI. It should help you, its working fine in my PC and I got the info about my simulated device.

  • Windows Movie Maker-legends are incomplete when published in the final movie

    My captions are incomplete when published in the final movie... :(

    Hello everyone.

    I use Windows Movie Maker to create a photo slideshow set to music. In addition, each photo has a caption.

    Here's my problem:

    Some photo captions are messy when I publish the movie. For example, "TCS 1999" shows as "SDC 199" in the published version, even if "SDC 2000" remains the same in the published version. " Not every picture is affected, but it is irritating.

    I would appreciate anyone's insight into this matter.

    Thank you! :)

    Hi MindyJane15

    I suggest refer you to the links below and check if the information provided will help you solve the problem.





    I hope this helps.

  • in fact, down grading from vista to xp pro.try recovery disk of one model on the other model (but same brand laptops) but two laptops has different processors and built various bone.

    I had two toshiba model laptops.one (satellite A100) used by processor with windows xp pro as os centrino and the other (satellite A135) with processor core 2 duo 1 GB of ram which has windows vista family premium as OS.i would change with the operating system of the second laptop (A135) for windows xp pro.can I use the recovery of the first disk cell (contains xp pro os) to install xp pro os on the second laptop which until now has vista Home premium? Can u pls tell me that the recovery disk for xp pro os with centrino processor compatible with the system which works on the basis of processor duo laptop?

    OEM and retail licenses:

    If your computer is pre-installed with Vista, it is classified as an OEM license and is not transferable.

    The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
    You cannot transfer it to another computer/laptop

    If a license of Vista at retail, you can transfer it to another computer/laptop.
    But it can only be installed on one computer at a time.

    A single license is a single Installation.


    Installation of XP instead of Vista:

    Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...

    If the XP drivers are not available for your model, forget the idea.

    If Yes, download and save to a CD or Flash drive.

    Then buy a disc XP and license.

    Save all your data because it will be lost during the installation of XP.

    Then follow the steps below to do a clean install.


    Once installed, reload ALL your other programs of original media, or download again.

    Reload all drivers and utilities for your motherboard.

    See you soon.

    Mick Murphy - Microsoft partner

  • Why the excess USB traffic created by some models of the Microsoft Wireless Optical Desktop Receiver?

    As part of my work as a volunteer for a repairman to point not lucrative to registered of Microsoft, I test a selection of mouse and wireless keyboards that are given.  Based on the production of a software tool for USB port monitor, I noticed recently that some models of the Microsoft Wireless Desktop Receiver generate constant even when the keyboard and mouse are slowed traffic USB (about 10 transactions per second) or are completely absent.  This occurs with the 2.1 receiver Microsoft Wireless Optical Desktop (model 1028) and the Microsoft Wireless Desktop receiver 3.1 (also labeled model 1028).  It does not occur with the Microsoft Wireless Optical Desktop Receiver 1. 0a, nor have I watched Microsoft controls only receivers or receivers of Logitech mouse...

    This makes me curious.  What do these receptors with all this chatter?  I assume deliberately, because I see the same thing in all the units I checked.  If I was pretty savvy to decode the trace of the USB, I might be able to figure it out by myself, but I'm not.  I hope that there is someone on this forum who remembers how these old 27 Mhz receivers are designed and who can make me jump the learning curve by giving me an explanation of a layman to what happens here.


    Thanks for posting your question on the Microsoft Forum. I understand that you are unable to connect to your hosted network.

    I suggest you to ask your question in the TechNet forums.


    TechNet is watched by other computing professionals who would be more likely to help you.

    I hope this helps.

    Thank you.

  • How to identify the model of the device programmatically?


    is it possible that I can recognize a model programmatically? I know that there is DeviceInfo class and for example something like ProductID - but it's different for each model.

    I'm looking for something that will allow me to recognize him as a model of the device is for example 8800 or 8300.

    can I do it somehow?

    DeviceInfo.getDeviceName ();

  • Is it possible to load the specific libraries about the version of BlackBerry model (NOT the software)?

    Hello world

    I know it's possible to load specific libraries about the version of the BlackBerry host software (using files .alx and .jad files), but it is also possible to do the same thing about the version of BlackBerry model?

    I know you can find something with download OTA by designing a specific download servlet that will check the version of the device model (using the HTTP for ie user agent) but how could you do the same thing with the files .alx file? Is it still possible?

    In regards to as you can only check the device software version, but you can't do it with the version of the device model... Is there a workaround here?

    Thanks in advance.

    Sorry for the inconvenience, I recalled an old article that I came across a couple of months:

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800708/800651/How_To _...

Maybe you are looking for

  • ads reappear in ALL how can I get rid of this without having to pay 4 something?

    No matter how many cookies I cancel or ads I have block, I keep getting interrupted at the MOST inconvenient times, especially when I am SMS anything at any time.

  • Skype to go step by step and costs

    I live in the Canada and use Skype to call landlines in the United Kingdom using Skype credit. I call when I'm on wifi but want to understand Skype to Go. I have a Slype number of GB, but I'm confused. It shows as a local number to me, I will call th

  • HP Notebook battery/AC issue


  • Pure SKU custom

    I'm looking to design my own bike X Pure, but I would like to use it with the radio of the Republic. If I make a Moto X Pure with the manufacturer of motorcycle online and order it, what will be the SKU? Wireless Republic said that it must be XT1575.

  • T400 unknown device in Device Manager

    I just replaced the hard drive with a new one. I reinstalled all the software; However, I can't find the software needed to correct the error. I downloaded the power manager and the TRM software, but the problem remains. I am running XP Pro with SP3