Switch to the word generator

Similar Questions

• The word generator bug?

  I use the new digital_clock source to trigger a word bitstream generator.

  The output using a range of multiple channels for analysis, I see no difference on the time when the trigger when I change between rising edge or external triggering lower edge. It always seems relaxing on the front of the digital_clock.

  I use Multisim 11.0.2 and only connected (and data entry for) the least significant bit in the word generator.

  Anyone can reproduce this behavior or to confirm that it is a bug?

  Yes, it seems you are right. He always fire on a rising edge no matter what. I will communicate with R & D on that issue and I hope that we will fix it in the second version. Thanks for pointing out this bug!

• When I type messages in social networking applications I can not get switched between the words or the cursier of this specific word that I want to continue

  When I type the message in other applications, I can't acess between word assume you that I typed the word syped instead of type in a paragraph, and I want that this word must be corrected impossible to go to this place it shows just the option {select, select all... etc} please help? / / /

  You use the keyboard as a trackpad- http://www.imore.com/how-use-keyboard-trackpad-iphone-6s

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.

• With the help of large paintings for a random word generator

  Hello

  I am currently working on a random word generator quiz this kind of thing, you press a button (click/touch) and a random word appears, you must then click/touch again to choose that if you think it's a real word or a compound word, whenever you get a right you get a point. No problems so far, I have all this works with the help of a few global variables (eep) and a couple of berries that store the image names and the true/false values so that they are real or not.

  Now that I'm starting to fill the building with the final content I am realizing that the table of the image is going to be huge, some 250 more entries and currently he is sitting on an action to click the button. Is it the right way to go about this or is there a better way to store the information about all? In a text or .js file maybe?

  All boards that much appreciated, thanks for reading!

  Hi spiders.

  If you push 200 objects a picture, you probably want to use a loop "for".

  Alternatively, if you load an image at random, and they are all named in the order, you can try something like this:

  wordCount var = 200;

  var imageIDToLoad = Math.floor (Math.random () * wordCount); / / Choose random num

  Substring var = ' images/word'+imageIDToLoad+'.png';// added this var to work around quotes

  var imageURL = "url (" + subString +")"; / / create the URL based on the random ID num and substring

  var randomWord = sym.createChildSymbol (imageURL, "wordWrapper");

• Cannot generate the Word .doc

  100 classic page chm project compiles successfully. You will need to create the document Word for graphic designer do a nice .pdf. Get warnings (style not defined, mapped to normal). Can not find the style not defined in the code, but see some class = msonormal elements. Then, I get error "Word Document became corrupted when you attempt to add a topic malformed". Then, RoboHelp is unable to deal with a subject. Then it has Fatal Error "Word Document got corrupted" and she is abandoned. A little more of these erros and he cannot generate the rest of the Word document.
  
  Cannot search this forum for "malformed", either. Get a "Variable FTVAR_RESULTTYPE is undefined." Message.
  

  Cannot find the whole chain, but the deletion of any reference MSObookmark did the trick, thanks

• Fixing the quotes generated by Word in the HR project

  Hi all.

  I'm running RH8 and the generation of HTML help. I have imported a large amount of text from Word and have since learned that "Quotes" of the Word appear as question marks in the context of the user (although they seem OK in Robohelp). I want to fix this in the Robohelp HTML file.

  Here is what I see when I look at the HTML in Robohelp:

  "Curly quote of the word opening shows that:

  "Curly quote of the word opening shows that:

  Quote on the right shows that: & quot; (This is the goal for both word quotes.)

  "Curly apostrophe Word shows that:

  Straight apostrophe indicates that: "(this is the purpose of the apostrophes).

  Looks like a search/replace simple should solve this problem. But when I try to use the HR "Search and replace in files" function on the folder of the project, looking for citations of the word, I get the error "no files found matching text.

  I was using copy/paste to copy the characters in question directly from Robohelp HTML and in the areas of search/replace. I tried the two parameters of the checkbox "Ignore HTML tags" and helped search for files named *. * (for example all files in the folder), but I get the same error.

  No idea what I could do wrong?

  The only posts on what I find on this forum suggest using a tool third find/replace, and I'll find and install one of these if really necessary, but it would need approval of our internal IT Department, so I'd rather not.

  Any help is appreciated!

  -George

  Hmm, I see the problem now. I think that the quotes used to enter with HTML code, now they show as the french quotes.

  Good news, however, I found the search and replace failed until I turned on the respect of the case. Try this.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Connect the words specified in textframe with lines

  Hi all

  I want to use the script below, and replace it with a script that connects the words specified with lines. Now, it connects all words with lines. I don't know what to do, so I hope someone can help me.

  Thanks in advance

  #include./lib/bene.jsx
  InDesign CS2 JavaScript
  The value 4.0 script object model
  app.scriptPreferences.version = 4.0;

  ////////////////////////////////////////////////////////////////////////////////////////// ///
  var NomMonScript = app.activeScript.name;

  var myObjectList = new Array;
  If (app.documents.length! = 0) {}
  If (app.selection.length! = 0) {}
  for (var myCounter = 0; myCounter < app.selection.length; myCounter ++) {}
  switch (app.selection [myCounter].constructor.name) {}
  allow only managers of related texts
  case "TextFrame:
  myObjectList.push (app.selection [myCounter]);
  break;
  }
  }
  If (myObjectList.length! = 0) {}
  run the thing! call a function
  myConnectWords (myObjectList);
  }
  else {}
  Alert ("Please select TextFrame and try again.');
  }
  }
  else {}
  Alert ("Please select an object and try again.');
  }
  }
  else {}
  Alert ("Please open a document, select an object and try again.');
  }

  ////////////////////////////////////////////////////////////////////////////////////////// ///
  functions
  ///////////////////////////////////////////////////////////////////////////////////////// ////
  function myConnectWords (myObjectList) {}
  myDocument var = app.activeDocument;
  var myLayer, myCounter, myColor;
  
  Measure
  var myOldRulerOrigin = myDocument.viewPreferences.rulerOrigin;
  myDocument.viewPreferences.rulerOrigin = RulerOrigin.spreadOrigin;
  Save the units of measure.
  var myOldXUnits = myDocument.viewPreferences.horizontalMeasurementUnits;
  var myOldYUnits = myDocument.viewPreferences.verticalMeasurementUnits;
  Create the units of measurement to points.
  myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points;
  myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points;
  
  Get references no nuance.
  var myNoneSwatch = myDocument.swatches.item ("None");
  
  Create a color (if it does not already exist).
  myColor = myDocument.colors.item (myScriptName);
  try {}
  myColorName = myColor.name;
  }
  {} catch (MonErreur)
  var myColorArray = new Array (100, 0, 0, 0);
  myColor = myDocument.colors.add ({model: ColorModel.process, space: ColorSpace.CMYK, colorValue:myColorArray, name: NomMonScript});
  }
  
  Create a layer for the generated lines (if it does not already exist).
  myLayer = myDocument.layers.item (myScriptName);
  try {}
  myLayerName = myLayer.name;
  }
  {} catch (MonErreur)
  myLayer = myDocument.layers.add({name:myScriptName});)
  }
  
  Process objects (here the text blocks) in the selection.
  for (myCounter = 0; myCounter < myObjectList.length; myCounter ++) {}
  Download textframe
  var myNewFrame = myObjectList [myCounter];
  
  get all the lines in the frame
  var myLines = myNewFrame.lines;
  linking every word with all of the words in the following line
  for (myLineCounter = 0; myLineCounter < myLines.length - 1; myLineCounter ++) {}
  get all the words in the line + next line
  var myLine = myLines [myLineCounter] mentioning;
  var myNextLine = myLines [myLineCounter + 1] mentioning;
  myPathPoints.push([myLine.insertionPoints[-2].horizontalOffset,myTmpY]);

  Combine this + line then the words
  for (i = 0; i < myLine.length; i ++) {}
  Get the word
  var myWord_i = myLine [i];
  Table for the points
  var myPathPoints = new Array;
  Add fist point X/Y
  myPathPoints [0] = [myWord_i.horizontalOffset, myWord_i.baseline];

  for (j = 0; j < myNextLine.length; j ++) {}

  Get the word

  var myWord_j = myNextLine [j];

  If (myWord_j.baseline! = myWord_i.baseline & & myWord_j.horizontalOffset! = myWord_i.horizontalOffset) {}

  Add the second point X/Y

  myPathPoints [1] = [myWord_j.horizontalOffset, myWord_j.baseline];

  draw the line

  myDrawPolygon (myPathPoints, 1, 100, myColor, myNoneSwatch, myLayer);

  }

  }

  }

  }

  }

  myDocument.viewPreferences.rulerOrigin = myOldRulerOrigin;

  Set the units of measure to their State of origin.

  myDocument.viewPreferences.horizontalMeasurementUnits = myOldXUnits;

  myDocument.viewPreferences.verticalMeasurementUnits = myOldYUnits;

  }

  Well Yes - Fun little exercise, it was.

  Select an entire text block, or text directly, and this script logs all the words with the character style "label". The lines are at the centre of reference of each word.

  

  if (app.documents.length == 0 || app.selection.length != 1 ||
   !(app.selection[0] instanceof TextFrame || app.selection[0].hasOwnProperty("baseline")))
  {
   alert ("Please select a single text frame or some text first");
  } else
  {
   charStyleName = "label";
   app.findTextPreferences = null;
   app.findTextPreferences.appliedCharacterStyle = app.activeDocument.characterStyles.item(charStyleName);
   list = app.selection[0].findText();
   if (list.length == 0)
    alert ('No text found with char style "'+charStyleName+'"');
   else if (list.length == 1)
    alert ('Only one text found with char style "'+charStyleName+'", no use in going on');
   else
   {
    lpath = [];
    while (list.length)
     lpath.push ( centerOfWord (list.shift()) );
    if (app.selection[0] instanceof TextFrame)
     pg = app.selection[0].parent;
    else
     pg = app.selection[0].parentTextFrames[0];
    while (!(pg instanceof Spread || pg instanceof MasterSpread || pg instanceof Page))
    {
     if (pg instanceof Document || pg instanceof Application)
      break;
     pg = pg.parent;
    }
    l = pg.graphicLines.add({strokeWeight:0.5, strokeColor:app.activeDocument.swatches.item("Black")});
    l.paths[0].entirePath = lpath;
   }
  }
  function centerOfWord (word)
  {
   var l = word.insertionPoints[0].horizontalOffset;
   var r = word.insertionPoints[-1].horizontalOffset;
   return [ (l+r)/2, word.baseline ];
  }
  

• my girlfriend is Polish, I'm English, how switch us the language used for the file, options, tools etc.

  We tried to change the language in the options, etc., and this changed the language displayed in Web sites. But at the top of my browser, I see the words Plik Edition Widok Historia... I want to see file edit view history... And if I click on this symbol to the right of my screen that has 3 vertical lines, I get a load of icons accompanied by terms such as okno Nowe, Nowe okno prywatne, strone zapisz and best of all modes pelnoekranowy - what the * what it means? I want to see it in English, she wants to see it in Polish, we can toggle the language and if so, how?

  Hi, there is no user in the face of how to do, but for convenience, you can use an addon like https://addons.mozilla.org/firefox/addon/simple-locale-switcher

  as explained in the description of the addon, you will also need a language pack English/Polish https://addons.mozilla.org/firefox/language-tools/ to make it work...

• When I used to highlight the words-&gt; right click-&gt; "google search for...". "it allows to open the search in a new tab, while keeping the current page. Now, research tab in courses, but also opens a new tab. Is it possible to return to this return?

  Google search on the words highlighted

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Spellchecker underlines the words, has a selected dictionary, but offers no correct spelling suggestions.

  Like what is said. Firefox 4 will highlight misspelled words, a dictionary is selected, check the spelling is checked only when a right click on the misspelled word the only options are the same by clicking on the box without the misspelled words:

  Cancel
  Cup
  copy
  dough
  delete
  Select all
  check the spelling (which is checked)
  Translation
  Information page
  (and four elements extension - for noscript, colorzilla, webdeveloper and a downloadhelper)

  He worked before Firefox 4 - she stopped working as soon as the new version has been installed.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• How to ignore the words using keyboard shortcuts

  Using Ctrl + Rt arrow usually ignores the words when you type in a free text box but FF uses this keyboard command to scroll the tabs open. Is - this customizable?

  This has happened

  Each time Firefox opened

  is by typing in a text field

  Hi Toy4Rick,
  The keyboard to switch to the next tab shortcut is Ctrl + Tab and Ctrl + PG. FF.
  See this article for more information: hotkeys - quickly perform common Firefox tasks.

  You have all the related tabs that may cause the keyboard shortcuts change? Do you have any application for the global hotkeys etc.?

  Tell us what you find.

• Additional panel in the panels and controls in the Panel generated .h file

  I have a sign in my project, it is called LO_LVL_PNL.

  The generated header file seems to think that there are more. Here is the 'Panels and controls' section on the generated header file:

  / * Panels and controls: * /.
  #define  DITHER                           1
  
  #define  DITHER_CLOSE                     2       / * callback function: DITHER_CLOSE_CB * /.
  
  #define  DITHER_Dither_Settings           3       / * callback function: DITHER_CONTROL * /.
  #define  LO_LVL_PNL                       2
  
  #define  LO_LVL_PNL_SENDBUTTON_2          2       / * callback function: DIDsBUTTONcb * /.
  
  #define  LO_LVL_PNL_SENDBUTTON_3          3       / * callback function: EraseBUTTONcb * /.
  
  #define  LO_LVL_PNL_SENDBUTTON_4          4       / * callback function: SENDBUTTON_noe_cb * /.
  
  #define  LO_LVL_PNL_SENDBUTTON            5       / * callback function: SENDBUTTONcb * /.
  
  #define  LO_LVL_PNL_RESET_CAN             6       / * callback function: RESET_CAN_CB * /.
  
  #define  LO_LVL_PNL_UUTRESPONSE           7       / * callback function: UUT_RESPONSE * /.
  
  #define  LO_LVL_PNL_CLEARBUTTON           8       / * callback function: CLEARBUTTONcb * /.
  
  #define  LO_LVL_PNL_EXIT_BUTTON           9       / * callback function: cb_quit * /.
  
  #define  LO_LVL_PNL_Comm_Set_TEXTBOX      10
  
  #define  LO_LVL_PNL_COMMANDBUTTON         11      / * callback: CheckState * /.
  
  #define  LO_LVL_PNL_COMMANDBUTTON_2       12      / * callback function: Select_Files_DID * /.
  
  #define  LO_LVL_PNL_BINARYSWITCH          13      / * callback function: SetProgram * /.
  

  in my IUR I can find LO_LVL_PNL components, but not parts of DITHERING.

  Then, I renamed my generated header file, so it can regenerate without these additional items, but they get included when I recreate it.

  In the file of the UIR, if I double click on he Panel it opens and displays that the Panel is called LO_LVL_PNL.

  It started because I'm trying to read the value of a switch on the Panel, and in the call, I get a runtime error that follows:

  GetCtrlAttribute (LO_LVL_PNL, LO_LVL_PNL_BINARYSWITCH, ATTR_ON_VALUE, & on_off);

  NO MORTALS RUN - TIME ERROR: 'gui_handler.c', line 135, col 13, thread id 0x0000179C: library function error (return value ==-42 [0xffffffd6]). The handle is not a panel handle

  I don't know if it's two separate issues, or DITHER things cause the error; but I need help to fix both.

  The first parameter to GetCtrlAttribute() must be the handle Panel, not the ID of the Panel. The handle is returned by your LoadPanel() call.

  Do you already have a group called DITHERING? Copied from an earlier project, perhaps? Perhaps the editor of UIR has hidden or placed outside the screen. Try using the option editor find to see.

  JR

• Trains of pulses from switching on the fly

  Hello.  I'm having a problem with my state machine.  To my experience, we need to have a two trains different pulse at the request of various properties with and the idle state of the activity.  To do this, I thought that a simple state machine would meet all my needs.  However, my state machine appears to be locked in any case I chose when I hit the run button.  I suspect it has something to do with how generate impulses, which is to call a task request node repeatedly using a while loop.  My initial solution was to include just one button to stop this loop before moving my case, but it was ineffective.  Not even stop the state machine, that's when the loop has been able to stop the signal.

  Now I think I have what I want, need or change how the task VI stop and screw clear task are called (simple wiring in my case), or some commands that resets any process when I switch my machine of the State to another State.  It's probably something simple I forget, but I don't really know where to start.  It seems it would be easy in view of the nature of the State machines.  I have attached a sample VI, which is a compact version of my work VI, which implies a synchronization pulse to synchronize several channels which would pass them all when status changes.

  Note: The idea is to have the program running at all times and relaxation with a button or a switch in the experimental field.

  I use 2009 SP1, if you're curious.

  If you want that digital reading at each iteration of the loop, you must place the Terminal inside the loop. Currently, it is only read once at the beginning of the program, and then never again.

  Try execution highlighting to see for yourself.

  Overall, you have to rearchitect the whole program. Currently, it requires controls to be pressed in a certain order.

• How to set the size of text with the report generator

  Hello.

  I'm trying to set the size of the text with the report generator, but I find that I can't do this. Here is an example of the code that I use. Can someone tell me what I'm doing wrong please?

  Thank you, Alec

  

  I was generation from a word template.

  I hacked my version of the Toolbox to give me maunal indicator control "model? He had obtained his permenatly self stuck on "T". I exposed this flag outside the API, so I can control under certain weather conditions I may or may not use the model police.

  Does anyone know how to use this toolkit, or I did the right thing?

  Cheers, Alec