SWITCH UPWARDS A NOTICE + PRIVACY PROBLEM WHEN THE FIRST SCREEN LOCK

Similar Questions

• I noticed a problem with the way he is perceived the DPS on iPad

  Hello everyone, I noticed a problem with the way he is perceived the DPS on iPad. I know for sure it can be resolved, but I do not see the solution. Maybe some of you will give me a hand.

  I used during a presentation of DPS more html5/javascript animation, and I noticed that the animations are already loaded when I reach these pages, but if I chose the thumbnail summary page it loads immediately.

  I would like to than the animations to be loading when a user enters a page by dragging it.

  Thank you in advance. I wish you all the best.

  Yes, that was the problem, thank you very much, I can now show my client presentation.

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• tried to install a new copy of Windows XP Home. Everything is OK until the final phase, when the "blue-screen" appeared during the installation of the drivers.

  Installation of xp and blue screen of death

  Hello

  I recently formatted the partition boot and recovery of a laptop Medion2230, then merged the two partitions in a single NTFS partition.  Don't ask why, it's a long story.

  Then, tried to install a new copy of Windows XP Home.  Everything is OK until the final phase, when the "Blue Screen of death" appeared during the installation of the drivers. Restarted and installing XP as normal to repeat the first onboard staged and went to the "blue screen" at the same point as before.

  Using some diagnostic software, I reformatted the drive again, loaded XP set up and I had the same problem.

  Someone knows what to do?

  Thank you allionii123

  Now solved and pc with Windows XP home.

  Discovered a trick online, who said that at the beginning of XP installation, press F5, and this leads to a screen option - select 'standard pc' and continue with the installation of XP.

  (Again), formatted hard drive ran XP installation and followed above point.

  Worked the first time.

  Thank you very much for your advice.

  I think you can pressing F5 or F7...

  How to impose a layer of HAL during an upgrade or an installation of Windows XP

  Impose a HAL

  To prevent Windows XP to automatically determine the system HAL during the upgrade or installation of Windows XP, you can manually force in a system HAL. To impose an Abstraction Layer HAL during a upgrade or installation of Windows XP, follow these steps:

  1. During the phase in text mode of Setup, when you receive the message at the bottom of the screen, press F5:
     Press F6 if you need to install a third-party RAID or SCSI driver.

     Note If you press F7, the Standard PC HAL loads and the ACPI enforcement is bypassed.

  I would not need this except in the systems of many older and low end... :-(  After all, in the same article, for Standard PC they say: "the CPU can be a 386, 486, Pentium, Pentium II, or Pentium III '...

  Thanks for letting us know what you were doing.  Do you have all the necessary drivers after loading Windows XP?  I would not recommend using the default drivers for any hardware - always see what the manufacturer offers on their web page for each component of your system - card motherboard chipset, audio, video, network devices, etc.

• When not in Windows service will change screen what ever I've sat and that he go the first screen where it asks who is connect and it crashes my computer

  original title: security

  Here's the question-problem: when not in use Windows will change screen what ever I've sat and go the first screen where it asks who is connect and it crashes my computer. All I have to do is click on the little box that says locked and I go back to what I was doing. I don't want to do this. I have magic jack phone service and when she did this, I do not get calls? Is it possible that turns off. I have only one user of this computer.

  Go to Start\Control Panel\Hardware and Sound\Power Options\Edit the parameters of the Plan

  Change the option put the computer to sleep time forever!

• Problem with the main screen of firefox

  After the update of firefox to firefox 15.0 16.0.2's problem with the main screen. At the top of the main screen displays the bar (caption bar of the main form) that I have win xp and under this title is bar legend like win 7.

  Firefox is running on Windows Xp, if better, I can send the screen, but I don't know where is possible add image to this error report...

  Okay, the problem has been resolved, problem was with the Tab Mix Plus extension. I have an older version of this extension, because at work may not update directly, because I'm going to the Internet via a proxy. Download, update firefox extension directly through the proxy is not possible... I need to download via the other internet browser, in order to not do it often...

• Intercept touch green application event when the device is locked

  Hi, I'm new to blackberry. What I want is I want to take a key event (green or red button) when the device is locked and do specific tasks in my application that runs in the background if this button is pressed. Is this possible? How can I do?

  Just to be 100% accurate, it is possible for a keyListener (look to the top of the class) to pick up some events even when running in the background.  It can be different events when the device is locked.  Indeed, the events may be different depending on whether the "locked" screen is currently displayed or not. And the entire lot is dependent on operating system level, in other words, the same device running two different levels of OS will possess differently in terms of what keys can detect a listener in the background.

  So if you have a BONE and a specific device, so it might be something you can do, especially if it is an older operating system.  However if you try to create something that works generically, then know that I've tried and failed!.

• Problems with the touch screen of HP all-in-One after upgrading Windows

  I recently updated my version of Windows (64-bit) with system updates and then a full version updated to version 8.0 version 8.1.  After the update is complete, I started to experience a strange problem with the touch screen on my HP Envy Rove.  The screen would flash repeatedly one set of points in the right lower quadrant of the screen as if the simulation random screen button.  There is no way to stop this.  If the screen on a keyboard was pulled up, letters in the place of the flashes would be broadcast in the fields on the screen.

  The only way to stop the flashes of screen has been to go into the Device Manager and disable the HID-Compliant device driver.  It stopped (system generated keys) flashes, but also disabled my touch screen input.  So now the system is usable, but without the benefit of the touchscreen.

  Here is the information on the driver:

  HID-Compliant device

  Date: 21/06/2006

  Version: 6.2.9200.16851

  (input.inf)

  I tried updating the driver, but this seems to be the latest version available.  Go back to the previous version of the driver, could solve the problem, but I could not locate on the support web site.

  Any suggestions on how to solve this problem and re-enable the ability of my touch screen?

  Hello

  Downloaded drivers from the manufacturer will be the most tested and up to date available. The best place to download a driver is directly from the manufacturer of the equipment.

  So I suggest you to install the driver that is available on the HP website for your model.

  Troubleshooting of touch screen in Windows 8

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03488148

  Just reply with the results.

• I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  Hi Gemma,

  It seems that after reinstalling, Premiere Pro no has not been updated to the latest version. Check your application creative cloud for updates. If she says Premiere Pro is up to date, try to update Premiere Pro through help > updates... option in Premiere Pro.

  Thank you

  Regalo

• I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find that it has Photoshop on

  I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find it didn't photoshop on the list "installation."

  Download the files to install cs4 design premium and install ps to use them,

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How to print photos when the display screen is white? The image is missing in it.

  How to print photos when the display screen is blank?  It shows only a white screen empty when I select the photo and press on print.

  You click on a film image in the print module? And, I guess you don't have to go to the Print module, right?  Additionally, make sure that you have chosen to make a custom package.  If you chose the custom package you need to drag and drop images and organize them.

• HP probook 4520 s held the first screen of the logo

  I was installing windows when the system which took place facing upwards. When I rebooted, it crashes on the first screen of the hp logo. where written "press ESC to display the boot options. without key works ceiling light flashes several times and turn off.
  It is repeated each time. Help, please.

  When it is connected to your desktop computer, can you feel if he goes? When you say that the Bureau does not detect the hard disk, which is in the bios, or when you open my computer?  If the drive is recognized in the bios, you can buy a software like ntfs getback who will try to rebuild the fat table so you can copy items over to the hard drive of the desktop computer.  You can download a trial version that will let you know if it will work, but you will have to buy it to actually transfer the software on disk from the desktop. You can also try to download the certification test of the drive manufacturer that will fix the bad sectors and some minor problems. SpinRite will try to retrieve data for each of the areas that may be of low bits set not completely (upwards or downwards). If the Office does not see the drive in bios, the circuit board on the hard drive is bad or the disc is not rotating. If you gently hold the disc in hand and slightly turn the disc, you should feel a gyroscopic effect of the spinning drive. If you do not feel the disc spins, the motor is probably bad or racing circuit on low hard drive circuit is bad. Sometimes (perhaps 50%), you can try to replace the circuit board with the exact same model Platinum (even if you buy the same model of car, they may have different circuit boards).  The problem is that newer readers have a flash memory chip that stores the settings for each specific access accurate and speed reader. If the exact same Platinum turns the drive, but can't read well, he have to unsolder the flash chip and move it to the new circuit board. Then, the chances improve for recovery. If the new Platinum will not turn the engine, the engine is bad. You will need to send the drive to the manufacturer or to a recovery company that can remove the platters and mount them on their equipment, calibrate and read it (probably $1000 + without warranty). There are people who post how to break on the old engine and replace it with a new one, but I think it would be a mistake to try.

• Question about ActionBar on the first screen of the application

  Hi, I have a question about the actionbar behavior in the first screen of the application

  index.htm pushes immediately main.htm with actionbar. ActionBar clicks and responds correctly until I have add overflow on some buttons.

  When I click on the button of overflow, the overflow is displayed at the bottom of the page, the top of the overflow is put in correspondence with the upper part of the actionbar so buttons actionbar overflowing content is not visible.

  I reproduce this problem with the sample application.

  This is expected behavior? Is there a way around it?

  I was able to reproduce the problem and have connected it

  https://github.com/BlackBerry/bbUI.js/issues/329

• Mysterious black border (only) at the bottom of the first screen iPhone

  I have an iOS application that I wrote in 2011, and I'm trying to upgrade to the latest iOS and devices.  I have a thick black border at the bottom of the first screen of my request, for most combinations Device/Simulator and iOS. This is * not * a black border at the top and at the bottom of the screen problem, who has been treated exhaustively in the forums.

  There is only a single black border at the bottom of the screen. Also, the border is only broadcast on the first screen of my request, that has buttons to go to the rest of the application. Even if I navigate to the first screen of my request, somewhere inside the application, the border becomes visible. There is no black border in the other forms in the application, apart from the first screen.

  It is * not * seems to be a launch image problem. I have a picture of launch, [email protected], and the launch image works fine. Here are the setups I get or don't get the black border:

  iPhone 4S (iOS 9.2) Simulator - without black border

  iPhone 5 (iOS 9.2) simulator - black border

  iPhone 5 (iOS 8.1.3) device - without black border

  iPhone (iOS 9.2) 5s simulator - black border

  iPhone 5 s (iOS 9.1) peripheral border - black

  iPhone 6 sec more (iOS 9.2) Simulator - black border

  iPad 2 (iOS 9.2) Simulator - without black border

  iPad (iOS 9.2) air Simulator - no black border

  iPad 2 Air (iOS 9.2) Simulator - without black border

  Pro Simulator (iOS 9.2) iPad - thick black border all around the application window

  retina Simulator (iOS 9.2) iPad - without black border (at the bottom of the screen)

  I tried everything I could think of, but nothing seems to work.

  Hello sandpjain2,

  Everything you wrote in 2011 will likely be rewritten using the automatic formatting.

• Satellite M40-331 - missing the logo of the OSB on the first screen

  Greetings,

  When I try to activate my Satellite M40, I have this message on the first screen: "the Bad/missing OSB Logo. What can I do?

  Thank you

  Hey,.

  I really never heard logo OSB...
  Can you explain what you mean exactly, or what it is?

  Is the BIOS logo or what?