switched my laptop to external projector and my laptop deleted

Similar Questions

• Could not switch the display between the projector and the computer.

  Original title: how to connect the projector to a pc

  hp dx2300 model

  sharp projector

  Figure 1 gb (nvidia)

  cannot switch display

  Please help :(

  Hello

  I suggest you refer to method 2 mentioned at check and previous post if it works.

  You can also try the steps mentioned in the links below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

  The links above will help you to successfully connect the projector. I would also recommend to designate any job available projector and check to make the connections.

  It will be useful.

• Laptop computer connection directly to a projector and cannot see the screen of my laptop

  I'm trying to figure out how to display the screen of my laptop via a projector and also be able to see the screen of my laptop.  When I hit the function key for display on the big screen, my laptop darkens.  I found a post on this forum on the connection of additional views or projector (Set Up Multiple displays). When I go to Mobile PC and display to choose settings listed in the answer (mirrored, extended, etc.) aren't there.  My laptop is running Vista Business Service Pack 2 and two weeks.  Thanks for any help you can provide.

  Hello Shawn,

  Thanks for posting on the Community Forums of Microsoft Vista.

  It should probably be shortened on your laptop keyboard to turn on the visible screen (for example Fn + F5). Try these until you can see the image on the laptop monitor.

  Also, follow the steps and try to set the screen parameter as follows:

  (1) right click on the desktop, click Properties, and on the display settings, choose monitor as your main graphics card 1.

  (2) setup that monitor the as a 2nd external display (projector).

  (3) click on apply and Ok.

  Restart the computer to see if you are able to see the screen on laptop and projector.

  You can also check with the computer manufacturer to check if they have additional parameters to be changed.

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Unable to connect by Satellite Z30 - A - 1 8 external projector

  Hello

  I have problems to connect to this laptop to an external projector.

  When I connect the cable, it recognize the projector and screen is displayed, but after 15-30 seconds, the screen goes black and computer keeps trying to connect again to projector and problem keeps when its connected.

  The connection to the projector is made hollow VGA cable with about 10 meters, I have tested on several other projectors with other cables and the problem persists.

  The computer is new and I have installed the latest drivers. What can I do to fix this?

  Thank you.

  Have you tried to use a shorter cable?
  Not very well but it might be possible that the problem appears due to the cable (10 m).
  That would you say, using a HDMI cable? Have you tested it?

  On the other hand I also recommend a graphics card driver.

  By the way: to switch between the internal and external monitor, you must use the Fn + F5 key combination.
  Note: If you use the simultaneous mode, you must set the internal display resolution to match the resolution of the external display.

• DVD movies do not appear on my external projector

  I'm running a Satellite S1410-604 with Windows XP and a Sony projector. Everything works fine until I try to play DVDs through the laptop. The playing area shows on the computer monitor, but there is just black space on the projection screen. This is true both Win Media Player 10 and WinDVD.

  Someone told me to try to adjust the parameters of acceleration on the computer desk/display, but it made no difference. I also tried a proj of different data, but the results are the same. Any ideas?

  Hello John

  I'm sure that you start the movie and try to switch to external projector. As I know it is not possible to switch to an external device if the DVD player is running. Please try to switch to external projector using the FN + F5 key combination. If you can see the desktop on the wall, start the DVD player.

  Good bye

• Satellite Pro A120 - no image on external projector

  Do you have a downgrade for win XP on Satellite Pro A120.

  If I connect to an external projector I no longer get a picture of it. I tried the shortcut key and it will turn off the picture on the LCD screen of the laptop so the keyboard shortcut works, more also tried manually via the graphic properties.

  The only time where an image of the projector that I have spend is when I restart, in which case, on reboot, I get a picture on the projector, but not the laptop. Then, when I try to switch to hot key or graphic accessories I can go back to the laptop but then can't get back the image of the projector on.
  If I leave the projector image and do not a hot key switch as soon as I make a stop the stop then displayed on both devices.
  I reinstalled the display driver and the drivers from the chipset, but without success.

  Can anyone help?

  LOL: D but it s good news

• ACER Travelmate 5760 with Windows 10, cannot detect the external projector

  I have an ACER Travelmate 5760. I have upgraded to Windows 10, because Microsoft is launching a few checks and said that I would be able to upgrade. But now, the laptop cannot detect an external projector or monitor. Is there a driver that I need to improve?

  Thank you

  Winifred

  When you connect your projector, if you press the windows logo key + p, are you able to select expand and check if the projector work?

  also, if you right-click on your desktop and choose the settings display, is the acknowledged projector?

  How to connect the projector?

  on the drivers, you try to uninstall the real Intel VGA driver and reboot with your laptop connect on the web and let windows update find new drivers as appropriate.

• I can't project to an external projector on Windows 7 Home Premium.

  Original title: projector.

  I have improved my lap top from XP to windows 7 Home premium. Now I can't the project to an external projector. I click the icon, but nothing happens. What is the problem?

  Hello

  When you upgrade an operating system that you have done, you will then need to install the latest drivers for Windows 7 for him so that it works properly:

  Go to the website of the manufacturer of your laptop and see if Windows 7 drivers are available for your make and model laptop and also get Windows 7 drivers for 3rd party hardware.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

   

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

   

  ASUS:

  http://www.ASUS.com/support

   

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  If this is not available, Windows 7 will not properly work for you.

  See you soon.

• External mouse and keyboard do not function correctly on the Satellite Pro C650

  I have problem with my external mouse and an external keyboard. All started about 3 weeks ago. They freeze, jump or a stop, the most annoying is the mouse, I need to plug it back usually. This will work well about 1-5 minutes and once again. Touch Pad works well.

  I have installed the latest Windows updates, also downloaded and installed the drivers from Toshiba web. I configured the default BIOS settings. Nothing helps.

  I don't have a recovery disk to try it. Is there any solution other system recovery/reinstallation then?

  Someone had this problem?

  Hello

  It is not easy to say on this issue.
  Do you use wireless devices? Are the batteries OK?
  Have you noticed the same problem with other USB devices?
  I assume that the two uses of devices USB port of your laptop.

• 10 improvement of the Windows path hangs on "place the external storage and press OK.

  Hello

  This will be my first post on this forum.

  A couple of weeks ago, I bought a Toshiba SATELLITE CL10-B-103 for my son. The CL10-B-103 has installed Windows 8.1. Tonight I plan to make the installation of the Windows 10 upgrade because Windows 8.1 announced that he was ready for the upgrade.

  The trial progressed slowly but smooth and without problems until now... As the laptop is equipped with only an HD 32 GB the trial upgrade was informed that I had to stick a USB key. After that, the trial continues slowly but smoothly, but who did not question because I had all night. However after the first reboot of the system when he was about 60 or 66% of installation of process this error message showed: place the external storage and press OK. It's very strange since the key USB has been removed at all and was still in the system. It is strange, is that both the OK button as the Cancel button are not selectable. Without passing by the touchpad, not a tab or an entry.

  Some community online Windows 10 post mentions that, via the BIOS, the system must be initiated from this USB key. I tried to reboot the system with DEL, F2 or F8, but I couldn't get into the BIOS and wasn't able to change the boot sequence.

  After each "restart" the same error message appears. It does not matter that the USB is in it or not.

  So, my conclusion is that my CL10-B-103 is suspended/East in a loop. I don't know how to proceed.

  Please, I can really use some help.

  Thanks in advance.

  Because it seems that I can not only edit/change a message I am answering my own post now...

  The problem seems to be resolved. When I was able to use the touchpad I could push the OK butten and the upgrade product now.

• What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  Your library system can be on an external drive, if the drive is Mac OS extended (journaled) format and mounted on-site.

  But you must be careful, your external drive is always connected and available before the Photos and to import new photos.

  If Photos opens a different library, news, you can switch to the library on your external drive by double clicking on an external library. You can have several libraries, no problem.

  But pictures don't have any tools to merge libraries. You can switch between libraries, then open them alternately.  To merge two libraries export the photos of the smallest library and import the photos exported in the largest library.

  Or use third-party "PowerPhotos" to move photos between libraries.  But the merger is not supported in the free trial version. You must purchase the full version. You can download it here: Fat Cat Software

• possible bug in colorTransform-related mode full screen (projector and standalone flash player 10)

  Hi all

  It seems to have hit a bug in the current drive (tested on 10.1.52.14):

  If I programmatically change the color of a sprite consisting in a text and a circle the output is different if the application is in mode full-screen (the text is not colored in fs)

  In my class mousedown event handler I call the following (slightly simplified the code to make things easier to understand here):

  var cTrans:ColorTransform = new ColorTransform();

  _hColor =0xD78500
  Recolor the clicked sprite
  cTrans.color = _hColor;

  this.transform.colorTransform = cTrans;

  This is what I get in windowed mode (expected behavior):

  It's the same sprite full screen:

  I can switch between windowed mode and full screen and the text gets colorful or not, as stated above.

  Anyone got clues about what's going on? I mean that's not supposed to probably not be that way...

  No solution (easy) workaround?

  Thank you very much

  Mike

  Well I tried to make a projector and do not see with it, but then again my install puts 10.0.22.87 in the projector.

  I could try changing the Sprite to a MovieClip and see if that helps.

• switching computers using an external hard drive

  I copied my files itunes from computer A on an external drive and connected this player to another one of my computers, say computer B.  I had itunes on computer B.   But iTunes on computer B does not show my music, playlists, etc.

  Help, please.

  Drag all about iTunes library the external drive, move it to the second computer, start iTunes with the SHIFT key pressed and select. Rentals in it will only play on the computer, in that they were originally downloaded.

  (144345)

• I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  I don't have a 2nd computer.  Is it possible to migrate an external backup, and then on a new drive hard mac?

  Use Time Machine or a clone to copy to the outside.

  Time Machine Basics

  Basics of Time Machine (2)

  Time Machine Basics (video)

  Time Machine FAQ

  First Time Machine backup

  Clone - Carbon Copy clone          (Often recommended because it has more features than others)

  Clone-data backup

  Clone-Deja Vu

  Clone - SuperDuper

  Clone - Synk

  Clone - 6 tested Applications Software

  Time Machine from the Clones and Archives

  Commonly used backup methods

• How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

  How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

  Menu, file == > export - check boxes to include metadata and location- export to iPhoto

  LN