Switches to scheduled tasks – run the box-

Similar Questions

• Scheduled task runs does not correctly in the Windows XP machine.

  Original title: Troubleshoot the scheduled task.

  I have a scheduled task scheduled to run at 2:30 every night.  The time of execution scheduled next is 02:30 March 2, 2011.  I was not able to know what prevents it from running.  After a diagnosis, I'm sure it's not the exact command, but rather the setting in the scheduled task.  However, this is just in case: cmd /c start 'scan MalwareBytes' / low/b "C:\Program Malwarebytes ' Anti - Malware\mbam.exe" / scan-complete - log - cancel

  I have read many web pages on the resolution of the scheduled tasks, but the principal that I follow is http://support.microsoft.com/kb/308558.  Here is what I checked:

  • The scheduled task folder shows a 27 February 2011 than last time to run
  • Last log written by the application is February 27, 2011, confirming the last Run Time
  • Status column is empty
  • The application runs if I right click on the scheduled task and select run
  • I used 'cmd' and 'start' in a similar way to successfully launch a low priority job in different scheduled task launching a different application of scanning
  • Application logs for all three of my tasks planned for antimalware scans different show that there is a lot of room between the task durations
  • If I right click on the task failed on demand, choose run and wait for the end, success is indicated by a new log file written by the application and a "Last Run Time" update in the scheduled task folder
  • c:/Windows/SchedLgU.txt confirmed that the scheduled task that failed did not run since February 27, 2011, while other scheduled tasks has been run.  After a right click and running, c:/WINDOWS/SchedLgU.Txt shows a successful run.

  All my regular scans are set to run if the computer is idle, and I'm sure that didn't prevent this idling at this hour there.  The scheduled task failed is set to run under an administrator account even if this user is not signed.  He was placed this way well before the last run time of the February 27, 2011, and other tasks are also implemented this way (with success).  Is there anything else I can try?

  I think I found the problem.  I unchecked the option somehow to wake up in order to perform the scheduled task.  Thank you all for your answers.

• How to schedule tasks running without deleting?

  Today is holiday, but scheduled task does not, someone has suggestions on how to stop schedule tasks running without deleting?

  Thanks in advance for your suggestions

  Try to open the "Task Scheduler" in the control panel... Or, select run, type: services.msc

  MSC, locate the service, double-click "manual start" the value of autostart.

  close when through...

• Unable to create restore point. Vista64. Could not create the scheduled task for the following reason: cannot create a file when that file already exists

  RAID 5 obtained corrupte had to rebuild after that can't create system restore point. Tried everything sfc, fsutil, Dungeon SystemPropertiesProtection screen displaying this error: "could not create the scheduled task for the following reason: cannot create a file when that file already exists." (0x800700B7)"system of work in all other respects. SFC says it found and fixed errors every time I run it.

  Fix tried Della Li: Please remove the WindowsBackup folder in the HKEY_LOCAL_MACHINE NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows.

  Delete the WINDOWS BACKUP folder. Unfortunately this folder does not exist.

  Checked VSS, Taskscheduler and other services are runnig

  Tried to boot from the CD and widowed revover. Says no problems. The error to any manulation of the checkbox in the properties of the system, the system protection screen

  Solved

  It turns out that task scheduler got corrupted it have several tasks Scheduler said were not available, but are still in the working directory. These tasks especially SR from compensation directory solved the problem and I can now create backup points.

• network drive mapped 2003 server need stay connected after journal so that when my script is scheduled to run the player will always be mapped.

  2003 network drive server need mapped stay connected after journal so that when my script is scheduled to run the player will always map. ??

  Hello Scott,

  This is not the right forum for issues with Windows Server 2003.
  Please click the link below to ask your question in the appropriate forum TechNet.
  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

  Thank you

  Marilyn

• Restart the scheduled task when the server is restarted

  Hi all
  
  I have a work planned and executed through Service Center control. Then, the server has a regular job of system which restarts every week.
  
  I would like to know what is happening with this scheduled task when the server is restarted. I understand that I must again manually lunch at work.
  
  Anyone know what is the easiest way to automate a task that starts the task OWB?
  
  Thank you very much in advance for your help.
  
  Concerning
  Victor.

  Hi Victor,

  I understand that I must again manually lunch at work.

  you don't need lunch again job - OWB.
  Employment in the Oracle database still in State SCHEDULED after restart of the database.
  It is a problem of OWB, she had lost the synchronization status of a task planned with Oracle database

  Kind regards
  Oleg

• How to configure Task Scheduler to run the program when the connection is established

  Windows 7 64 bit
  Dial-up Internet access

  I want to use the Windows 7 Task Scheduler to run a program IMMEDIATELY AFTER a dial-up connection is made to the internet.

  How can I configure the Task Scheduler in Windows 7 to do this, please?

  I am familiar with the Scheduler of tasks with the command line parameters.  Any help is appreciated.

  Thank you

  FYI: If an example is needed, Microsoft Security Essentials can be configured to update virus through this path with the argument definitions:

  C:\Program Files\Microsoft Security Essentials/MpCmdRun.exe SignatureUpdate

  Maybe someone can use it to show how to configure the Windows 7 Task Scheduler to update MSE virus definitions, once the connection dial-up was made?

  Otherwise, for example, another program to run once established a dial-up connection would be OK, thanks

  Hello

  Scheduler of tasks is time driven.

  For order-driven event, you need a script.

  Question like that is much better treated in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Scheduled tasks run twice after the upgrade to MX7

  I've recently upgraded to CFMX7 and now my scheduled tasks are run twice. I recreated all the tasks, restarted the server and made sure I'm on V 7.0.2 but nothing seems to help. Is there a solution for this out there?

  Thanks for the reply Matt! Actually, you helped solve my problem indirectly. The xml file does not duplicate list, but when I went to check the xml file, I noticed that there are 2 installations of coldfusion, one for MX and one for MX7. I checked the services and of course the CFMX and CFMX7 running at the SAME TIME! What a great feature! All you have to do is anyway for someone else out there with the same problem:

  Click Start/Run, type services.msc and click ok.
  Scroll down the page until you see the coldfusion services.
  right click on all coldfusion MX7 services are not labeled, and go to properties.
  you want to stop the service and set to manual start so that it does not start again to restart.

• Scheduled task 'RUN' after 'stop running '.

  With the help of the ADC 9.1.1
  Running 'AD organization finding Recon '.
  
  The scheduled task continues to be displayed as "RUNNING" even after the execution of the task was completed in the Web console or design.
  After restarting the IOM server it is always marked as "RUNNING".
  
  Ideas, any help would be appreciated?

  Hello

  It is a well known problem in the Scheduler of the IOM, some times what happens that this task is not completed or terminated even while State continues to run. I'm sure that the task does nothing. What you can do is just go to design console and type 'INACTIVE' status box and save... Next time when the task will run, it should be fine.

  Concerning
  Nitesh

• Scheduled task runs only if connected (W2k3 server)

  Hello

  This was bugs me for a week now: W2k3 server a customer has a problem to launch a specific scheduled task.

  The task calls first on an application that generates files; Excel is open, then a macro is executed, which saves more than some files; Finally, these files are copied to a UNC path to another server.

  -The permissions on all the files are OK (account used is domain administrator)

  -"Run only if connected" is NOT selected

  -But: Excel displays apparently the first home screen whenever it is opened with this account.

  Any advice would be greatly appreciated!

  Hello Quip666,

  Since you are on a domain, I recommend you to repost your question with the professionals at Technet Windows Server Forum where one of the experts in this area would be better suited to offer you a solution. Thankis!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No scheduled task running in Windows 7

  I am running 32-bit Windows 7 Home Premium.

  There are about 5 days all tasks stop running scheduled. Task Scheduler says:

  Summary: 0, total 0-0 running succeeded, 0 stopped, 0 failed

  The Scheduler and its dependencies are all running and configured to start automatically. I see nothing in the event logs to explain this, even if maybe I'm looking in the wrong place.

  I have run the System File Checker and found no defects.

  Can someone advise.

  Thank you. Kind regards... Bernard

  Thanks for your suggestion of Marilyn...

  It took a while to work, but the answer has proved to be much simpler than I expected.

  As you will see, in my original, Scheduler task message indicates:

  Summary: 0, total 0-0 running succeeded, 0 stopped, 0 failed

  When I check the report of the task status on the Task Scheduler (local) page.

  However, what I didn't realize is that this summary is produced only if the Task Scheduler is set to activate all tasks history. My copy has been set to disable all tasks history and since I changed this setting, execution details and the summary tasks are appearing as I expected.

  Thanks again for your help.

  Kind regards... Bernard

• Exchange Connector - scheduled task, running time

  Hello
  
  Does anyone have experience with long-term when you run the scheduled task to "Exchange target resource user Reconsiliation" for the first time (full reconsiliation)
  It worked for about an hour now and I don't know if it's fake or not. In the event log, I get a bunch of them:
  oracle.iam.connectors.icfcommon.recon.ReconEvent: putSingleField: attribute [Message body Format *] not found in the connector object.
  
  * It varies, e.g. [Format Message prefer to use]
  
  Advice will be appriciated :)

  What version of the connector and what version of OIM? I saw problems with the connector of the ICF and the way in which it is recognised. A few bugs:

  1 14757197-> it is to solve the problem where the Get-DistributionGroup is heated in the connector for all users, even if we had removed the configuration of IOM to make distribution of the user groups. In our environment, it's take more then 2 minutes to get distribution group a user of the.

  2 14759585-> base connector does not any parameter search for the ORGANIZATIONAL unit in the work of the annex, so the way it works is that it picks up all the user defined in the resource base then iterates through each of them to match the filter criteria in the planning work and creates events if the filter matches. That means, is that all users are loaded into the memory of the Server Connector first, and then they are checked for recon rule. This affects the performance in a negative way. A means of circumvention, it is searching for base in resource limited to a specific organizational unit, but if you have several units of organization and an AD forest with multiple domains, you need to create several resources and which may impact your design of the access policy (as applicable). So, we had this fixed bug where work planning would be an additional parameter of the UO there where we want to get the users of. If you have a very high number of users, it may even crash your server connector. This bug also solves the problem where the filter is now supported for exchange attributes (not all good) in the scheduled task. So, you can put a filter to reconcile (or basically interview) for human mailboxes only.

  3 14786992-> this issue got to the mailbox database. The connector works from basic is to run the Get-MailboxDatabase command for each user with no - possibility of identity. What this means is that this command brings
  all the databases in the system and returns the last in the list as the user. Two effects here, performance if the number of databases in our case is huge (80) and second is data incorrect in the IOM. Even if the user has e-mail data in the data store 'A' IOM would show that the data store is "Z".

  I don't remember anymore but searching metalink and you should find one or two more that we have opened.

  -Marie

  Published by: Bikash Bagaria on February 28, 2013 20:00

• Disable the scheduled task when the cover is closed

  Hi all

  I'm working on a project using a Panel (with several buttons) and scheduled tasks.

  The problem is that when I close the Panel, scheduled tasks continue to run in the background.

  So, I wanted to know if there is a way to kill these tasks when the cover is closed.

  Thank you for your time!

  Ekibyo

  I don't think you don't need none of that: what you need to do is store the Panel object in a global variable or a property of your script object and then try to access in the task code.

  So let's say that you store the window in a global variable:

  var MyScriptPanel = this;
  

  Then in the task code, you should be able to test if the Panel object is still valid:

  try
  {
       //     Atempt to access a dummy variable:
       //     - will return undefined if the Panel is open
       //     - should throw an error if the panel is closed
      MyScriptPanel.a;
  
       //     Do your thing and reschedule the task
  }
  catch (err)
  {
      //    Cancel the task
  }
  

  Tell me if it works.

  After using many scheduleTask I must say don't really like it: I have not tested in CC, but you may notice in CS4 to 6 that it resets the cursor when the mouse is not moving or ignore some shortcuts keyboard, so I would recommend not not to schedule your task too often, or at least give the user a way to select the frequency of execution.

  EDIT: as your line is not fair:

  panel.onClose = Panel_Close();
  

  It should be...

  panel.onClose = Panel_Close;
  

  ... with no '()' so that you copy only the body of the function in the callback to onColse. But I wouldn't rely on the events of the UI for something that should work every time.

• Could not get a scheduled task runs

  Hi people,

  Google a lot for it but can't find the answer. Sorry to have to post.

  When I find the file it works fine, but the usual run of cfadmin. Can anyone help?

  I checked the permissions and they seem to be ok.

  Any help much appreciated.

  Thank you

  matthisco wrote:

  Any ideas?

  Disable the "Windows integrated security" feature in your server control panel web IIS for this file from ColdFusion can not send a WWW-Authenticate header for an HTTP request for the scheduled task.

• Using the Scheduler to run the rman script directly stored in the recovery catalog

  Hi everyone, I usually automate my backups rman, using either cron or dbms_scheduler to call my stored in a sh file NIX rman scripts.  Everything works fine but anyone know how / if it is possible to call a stored in the recovery catalog rman script. Let's say I have create a script in the catalog:

  RMAN > create script showall

  Comment "just one example of demonstration."

  {

  VIEW ALL;

  }

  Can I use dbms_scheduler to call this script directly? If Yes, how and if not then how can we plan for this or a stored script stored in the rman catalog catalog.  Been looking all over the place, but everything seems to indicate leaving Oracle to call .sh or .bat file.

  Kind regards

  Dave

  Well, let us know the result.

  The link you supplied refers to 12 c Scheduler improvements it seems, it may not be applicable to lower versions of Oracle.