Switching between microphone and line-in in the Realltek Sound Manager

Similar Questions

• Switch between files and change the window using f8 - Dreamweaver CS 6

  In Dreamweaver CS 2, I could switch between files and windows edition with the f8 key. Dreamweaver CS 6, this doesn't seem to work. Is there a way I can put it so that I can switch between the 2 windows with a keyboard shortcut?

  Hello stilley,.

  I'm now working with DW CC, so I can only show you how to work with it, but I'm sure it's the same way:

  In my German DW:

  Bearbeiten > Tastaturbefehle > screenshot > files > Kurzbefehle +-taste press > change > Ok.

  Translated something like:

  Edition > keyboard shortcuts > screenshot

  

  > Files > shortcuts + - press > edit > Ok.

  Good luck!

  Hans-Günter

• It takes up to 4 minutes for the player switch between library and Rip, and vice versa.

  I run Media Player 11 on my XP machine with spare 120G on the C: memory and 3G - recently, it takes up to 4 minutes for the player switch between library and Rip, and vice versa. I have re-installed twice but no change. No new software has been installed before this time.

  Hello Absno69,

  Thank you for your message.  You mentioned that there were no new software installed before that happens.  Were there any hardware changes or updates?  If this isn't the case, we will perform a system restore to a point that you know that your system is working effectively.  Click HERE for the system restore instructions.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I want to restore switch between windows and display the desktop icon

  a few days before these two icons was actually on the task bar and now I have deleted how restore it back
  (switch between windows and display the desktop icon)

  Hello

  Copy the new:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  To your user account to:

  C:\Users\launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• (Vista) Is there a PRACTICE way to switch between speakers and analog headset?

  (Vista) Is there a PRACTICE way to switch between speakers and analog headset? Must I ALWAYS return the default setting, depending on which audio output device I want to use?

  We have recently installed Music Maker 16.  Before that, we never had a need for headphones and a microphone.  Now, in trying to use the headphone and microphone - and THEN switch back to speakers - we discover a problem.  Apparently, the only way to do it is to change the audio output device by default EVERY time.

  The dispute with this cannot be more of this.  My son records a beat and singing (with headphone and microphone), and then, play through speakers (so we can all hear), we need to change the default settings.  And back...  There must be a better way!

  Any help would be greatly appreciated.  Please talk layman jargon; I'm not a COMPUTER guru.  Thank you!!!

  Hi AnnieElle,

  You will need to switch between the speakers and the analog device and special value to use as the default device. There is no way to set the device to be used at the same time. You can follow the steps below to switch between the speaker and analog device.

  1. right click on the speaker icon in the taskbar.

  2. click on the playback device.

  3. Select speakers or analog device.

  4. right-click on it and click on set as default device.

  Hope the above information helps.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Display satellite C50-A546 cards how to switch between NVIDIA and INTEL?

  Hello

  How can I switch between NVIDIA and INTEL graphics cards?

  PS
  I have already installed all the drivers, but I can see that INTEL the card used chart!

  * OS: Windows 8.1 x 64
  * NVIDIA driver: 340, 52-portable
  * DirectX: 11

  Hello

  The Intel graphics chip, which is part of the central unit should be used for low performance applications, because it allows you to save energy and reduce the internal temperature.

  For best performance while game, it s advisable to use the external GPU (nVidia or AMD)
  This setting can be changed in the nVidia control panel s

  Here, you should choose manage them 3D settings (can be found on the left in the nVidia control panel)

  Now in the main window, you will find two global settings and program parameters tabs
  In the program settings tab, select the (game) program that needs to use the nVIdia GPU

  If it is not listed, click the Add button
  Then choose the graphic processor preferred for this program (generally must be nVidia processor high performance)

  Last but no less, in this program-specific settings, you can assign additional features to improve performance.

• Equium L10-273 kept switching between battery and power

  Hello

  I saw a similar post here and I was wondering if anyone could tell me if they have had this problem sorted? My Equium L10-273 kept switching between battery and power all others second, which made it impossible to type, it's got worse and worse. I thought it was a problem with the power supply, but when I removed the battery from the laptop is ok running of the adapter.

  He kept also make a noise of hissing/crackling growing fan region, which stopped when I removed the AC adapter. The adapter was unusually hot, and the fan area became too hot to the touch. This stopped now, I removed the battery, so I want to know is what someone has solved this problem by replacing the battery or it should be returned?

  This laptop is less than 2 years old, but apart from his one year warranty.

  Hello

  According to the description of your problem, I think there is a problem of electronic power supply. Sorry but there is not a universal solution, and I recommend you contact the service authorized in your country. Explain the situation and see what they say.

• Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Why is my screen blurry and lines undulate on the sides? It also keeps the glitter!

  Is your very large monitor, like an old TV or flat, as perhaps a few inches thick?  If it is very deep (front to back), you have an old style monitor, and they need to be demagnetised every now and then. Look on the monitor for the menu button and navigate until you find an icon like a horseshoe with a bar slash through it (or like a magnet) and select it.  All wavy and colorful display for one minute and then went back to normal. Also, make sure that all the cables between the monitor and your computer are firmly connected at both ends, even if you have a thin screen.

  If you have a laptop, try to turn the screen and see if the blur changes.  If so, you might have a connector loose inside and may need to be considered at a repair shop. =(

  Best luck!

  (There is a small chance it is a result of burn; made me know if any of them help you, or that they do not apply.)

• I was sent an email saying that my ID apple has been deactivated and to click on the link below 'manage my ID', is an email it looks quite like whether it is Apple?

  I was sent an email saying that my ID apple has been deactivated and to click on the link below 'manage my ID', is an email it looks quite like whether it is Apple?

  This is a phishing attempt. Do not respond. Shall not disclose any personal or financial information. You can use the address below to send the suspicious message to Apple. [email protected]

  The link below has information to identify fraudulent emails.

  http://support.Apple.com/kb/HT4933

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why Firefox will allow me to have several tabs, but not allow me to switch between tabs and can only watch a new tab when closing the previous?

  Everytime I open a new tab, it appears on the tab bar where it should, but if I click on it nothing happens, the tab does not open, and I can't switch between multiple tabs. The only way to get a new tab is to close one on that I am currently, and even then it will only open the next tab in the order of precedence, so I can't even choose which tab is next to see. This problem makes it impossible to use firefox as a research tool that requires quick change back and forth between pages in multiple tabs at the same time.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• switch between log and linear waveform graph

  I have a waveform graph that plots linearly. However, it causes an error during the logarithmic line tracing. Is anyway to create a switch that allows me to change between log and linear plot without creating additional graph?

  Thank you

  Chris

  Use a property node: Y Scale.Mapping Mode.  Written 1 to the node passes in logarithmic mode and 0 is for the linear.

  Lynn

• Satellite A500-19N - Wlan switch between on and OFF in battery mode

  Hallo,

  I bought a new A500-19N Satellite three days ago and one have the problem,
  When I used the laptop battery, the wlan switch mode between connect and disconnect.
  With powersupplier, I have no problem.

  All energy wlan settings I adjusted to full performance and now I have now idea how can I solve the problem.
  Do you have any ideas or advice?

  Thank you very much
  Nico

  Hello

  You must verify power WLan settings in Win 7 power management and need to disable the power save for WLan in battery mode

  I found a great HowTo but for Vista OS.
  But the settings are not really different.

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  Welcome them

• How to switch between two keyboards (Japanese keyboards have the double function of "direct entry"

  I have a laptop with keys 'English' and 'Japanese' on the same key board.  For example "A" key is also 'CHI' in Japanese, 'B' is also "KO" in Japanese.  How to switch between the two.  It changes itself.  This seems to happen after the mail in Hotmail changed in Outlook.

  Thank you

  Tomoko

  Hello

  Please go to the Microsoft Community Forums.

  From the description of the question, we understand that you want to switch between two keyboards entries.

  Let me go ahead and help you with the issue.

  Here are some steps you can follow to resolve the problem:

  Step 1:

  To change the default language, follow these steps:

  a. Click Start and then click Control Panel.
  b. double-click regional and Language Options.
  c. click on the languages tab, click details and then click Add.
  d. under input language, add the language that you want to use.
  e. under Configuration keyboard/IME, click the keyboard layout that you want, and then click OK.
  Note: Only users who have permissions on the local computer can configure the following options on the languages tab in the regional and Language Options.

  Step 2:

  To resolve this problem, change the hot key settings in your computer system. To do this, follow these steps:

  a. right click on the language bar and then click settings.
  b. in the Text Services and input languages window, click the Advanced Settings button select an action and then click Change Key Sequence.
  c. set keys and then save the settings.

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• Design of switching between Nexus7K and active / standby firewall

  In the attached diagram, Nexus7K is used in two ways: on the left side, pair NX7K connects to the firewall as layer 2 trunks. vPC VLAN are shared through resources. The firewall is a pair in Active mode / standby. On the right side, another pair of NX7K connects to the firewall as layer 3 rotued links. HSRP or VRRP is running between the pair of NX7K for firewall VLAN SVI.

  Because even NX7K have mesh connections to the active firewall units / standby, I want to make sure in failover scenarios (failover firewalls or failures of NX7K), the link that remains between the pair of NX7K and the firewall can actually send traffic (not perforated black).

  Failure scenarios I can think of include: Firewall active failover on the eve, failure of the main device NX7K, double NX7K active and failure of peers-link NX7K vPC. I would like to get some advice on what I should consider and implement in these scenarios to achieve high availability.

  Many thanks for any advice.

  Hello

  your topology, I see that the main problem is that the physical connectivity from the firewall to the pair of devices nexus in topologies to fails to a redundant link to the N7K

  first since you're using vPC with one counterpart vPC linking the pair of N7K then you must follow the recommendations of Cisco firewalls of L2 and L3 link connection

  L2 if you pass vPC vlan on the trunk in your topology and firewall then there is a possibility of blocking traffic or drop cases underwritten by vPC loop prevention mechanism in the case for example a vPC counterpart link gose down

  the fix to the East either:

  use no-vPC VLAN and link to switch separate inter for VLANs (i thin that you already have this link)

  or multi home L2 connects each firewall for the two switch N7K and assuming that HSRP is configured in the N7K and static routing is used between the firewall and the N7K

  for links to L3 Firewalls:

  You must stream as well (if possible and recommend) and use a static routing between N7K and firewalls and firewalls must point to the VIP of HSRP N7K

  multiple L3 and L3 dyanaminc routing peering on the link of the vPC-peer is not supported design

  Look at the discussion that might help as well

  https://supportforums.Cisco.com/message/3792466#3792466

  hope this helps

  If useful rates