SX20 bandwidth consumption

Similar Questions

• Limit bandwidth consumption on a monthly

  Hello

  We have a customer with a Cisco CISCO1941/K9. The router has a WAN 2 connection. 1 connection has a monthly bandwidth of 20 GB/month limit and a connection high speed. The second connection is unlimited and used as a backup connection in case the main line is inaccessible.

  Avoid the main connection to serve more in the cases where he used 20 GB and 20 GB/monthly make the router switch to the second connection until the new billing period begins.

  Is it possible to do on a CISCO1941/K9 Cisco without premium costs / extra/software Cisco?

  Thanks in advance for any response.

  Sven

  There is a political use of EEM on the link below.  It was built to monitor the use of more than 4 G interfaces but there is no reason why it would not work for your use cases as well.   Current policy alerts via syslog on BW messages and additional logic must be added to the failure of delivery on your main to backup interface.

  https://supportforums.Cisco.com/document/12098671/monitor-byte-count-Ove...

• Bandwidth consumption mobile App

  Does anyone have an idea how much bandwidth consumes a meeting? Obviously, it will depend on the shared media, but I was wondering if someone could give me a ballpark figure. We have our classes with PPT presentations and audio but not video.

  Thank you.

  Sorry, I got the link wrong. Here's one that should work.

  http://realeyesconnect.adobeconnect.com/p77id282p75/

• FF resolution settings to lower the consumption of bandwidth

  What versions of FF will do and what the specific settings are there for lower bandwidth consumption?

  In addition, the FF settings will be override settings on sites like youtube? For example, if my children were to click on a higher resolution or HD video settings for their videos on youtube, what would happen?

  Changing the resolution has no effect on the performance of Firefox, and can even be worse if you operate an LDC monitor not in its native resolution.

  You can block content if you ant to improve performance of a connection to low broadband bandwidth.

  You can watch Adblock Plus.

  • Adblock more: https://addons.mozilla.org/firefox/addon/adblock-plus/

  You must subscribe to a list of filters (for example the EasyList).

  • http://adblockplus.org/en/subscriptions
  • http://adblockplus.org/en/Getting_started

• Windows file sharing - a lot of bandwidth is consumed on ports 137, 138, 445 domain windows server 2008

  Hello

  I have observed this for a few months now on my windows Server 2008 domain (all my clients are windows 7) and it drives me crazy.  My wireless nodes #1 bandwidth consumption is taken by 'Windows file shaing' on ports 137, 138, and 445.  I tried to pull the bandwidth on these ports on all of my users wireless using the wireless controller, then the claim of the user than even a small file as 100 MB ' would take hours to download.  If windows 7 OS is too talkative, I prefer to go back to windows XP?

  What is the solution of my problem, I need to have my users to upload files and at the same time be fair with my bandwidth that does all my work of nodes and servers without really hard wire.  Help please.

  "Note: someday open a session:"windows file sharing"takes about 10 GB of bandwidth ' and sometimes 5 GB"

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information helps.

• Bandwidth configuration Expressway

  Hello

  Can someone let me know to change the bandwidth on Hwy C and E server configuration.

  This will affect the quality of B2B video calling and Conference I endpoints MX800, DX 80, EX80 and C60.

  I also have the TMS, is it also requires change bandwidth on MSDS.

  The conductor, I configured HD for the teleconference scheduled.

  Bandwidth restrictions: the speed of maximum Session for video calls on the default region on Cisco Unified Communications Manager is 384 kbit/s by default. The bandwidth by default call on Highway-C is also 384 kbit/s by default. These settings may be too low to provide the quality expected video for the DX series.

  http://www.Cisco.com/c/dam/en/us/TD/docs/voice_ip_comm/Expressway/Admin _...

  Kind regards

  RACLOT

  Hi r.,.

  Cucm point of view, it is a function of the parameters of the region. As explained with examples in the SRND

  When a video call is established between two video end points, audio and video streams are established and the bandwidth is deducted for the negotiated rate. Unified CM uses regions to determine the maximum bit rate for the call. For example, with a Cisco TelePresence EX90 system to higher detail of 1080 p at 30 frames per second (fps), the rate negotiated between regions would have set at 6.5 Mbps. EX90s used in this scenario would be on average about 6.1 MB/s for the session. When endpoints start the presentation during the sharing session, BFCP is negotiated between the two ends and a video stream is activated at 5 fps or 30 fps, depending on the endpoint configuration. In this case, endpoints are butterfly to the bottom of their main video stream to include the video presentation so that the entire session use more than the allocated 6.5 Mbps throughput. Thus, the average bandwidth consumption remains the same with or without presentation sharing.

  Immersive Telepresence and desktop settings such as the Cisco TelePresence system 500, 1000, 3000, and TX9000 Series, who are negotiating a call between them work a little differently in the sense that the video of presentation of sharing is additional bandwidth beyond what is allocated for the main video session, and so it is not deducted from the Enhanced location CAC.

  More details are given here

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/srnd/collab09/CL...

  In addition, as stated in the previous post "bandwidth restrictions put in place by the call control infrastructure will be replace this parameter.", it means that for the endpoints registered with cucm cucm parameter will prevail.

  Manish

• bandwidth upstream req to run Acrobat Connect Pro video live w

  Is 3mbps enough bandwidth to run Adobe Acrobat Connect Pro meetings for 6 to 12 participants upstream video live w?

  Here's the technical guide of 9 Connect. Average bandwidth consumption are listed on the 2nd to the last page. http://www.Realeyes.com/wp-content/uploads/2014/06/Adobe-Connect-9-technical-guide.PDF

  Assuming that the higher quality settings each user should around a bandwidth above 500 Kbps. other things to consider is if they are broadcasting audio VoIP (44 Kbps) and for sharing their screen 200 + Kbps. So, I guess that upstream 3 Mbps connection will not suffice to attend a Connect meeting.

  However, you can consider that approval can be saturated quickly with live video. Yet once again, assuming that the quality setting more high (which means that you can grant down and make more reasonable numbers) with 6 participants meeting all their video live broadcasting would require 500 kbps upstream and 2.5 Mbit/s downstream. A meeting with 12 would require 500 kbps upstream and 5.5 mbps downstream.

• Question on blocking of images

  Hello

  When I disable 'load images automatically', which of the following happens?

  -Images will be downloaded, but does not appear.
  -Images will not be downloaded.

  I'm asking this because I'm on a limited internet connection and I want to save bandwidth when possible.

  Images will not be downloaded.

  You can also try to use Ad-Block Plus to help reduce bandwidth consumption even more. https://www.adblockplus.org

• A few questions on my Satellite A100-PSAANL

  I recently bought a Toshiba laptop (after a lot of research and looking for a room), September 14, to be more precise. Here are the specs:

  Satellite A100-PSAANL - 04L 036 (A100 - 2214D is that the dealer is called I'm not able to find it anywhere else on the net). It has a CPU Core2Duo 2 GHz with 4 MB of cache (it's what me attracted) and Windows Vista business with ITW for 3 years. I felt at the top of the world, return the purchase. But since then, it has been a constant list of problems:

  1. the Flash card starts giving problems. The net says it's because of Vista, define compatibility, run as admin and many tips. None worked. Suddenly, windows will be the collection of information to send and to find a solution to the failure of program Toshiba flash Cards. Finally, I have disabled it at the cost of losing the F1 - F12 keys feature. I tried a few downloads, but no use. So I say a new update (posted October 3 files). The upgrade is of 8 records. The 3rd file fails or download it. There is in fact no third party file.

  Visit this link. http://PC.Toshiba-Asia.com/support/downloads/index.jsp?product_list=2&seriesID=3&ModelId=1112&s howtype = pilots & docid = 5678
  I used my precious bandwidth for nothing.

  2. the Intel 3945 ABG card suddenly disconnects wireless router, with a message of limited connectivity. I said to myself, this is my internet connection and 2 minutes of my time to reboot the system. It is common with no difficulty, even if I have my drivers to the most recent update on the site. Once again on the site above. No use. Only waste of bandwidth consumption.

  3. I tried to register the warranty which gave an error message. I watch the guarantee search link, the site says I have only 1 year my distri says 3 years ago.

  4. I've seen in a pdf file that the buttons on the side can be used for Express media player. But I put t seem to have. Or any help for the same thing. I press the button and windows starts to CD/DVD.

  Can someone please help?

  Thanks in advance

  Hello

  I see you have a lot of questions. If possible I'll try to give some useful advice.

  On point:

  (1) I read on FlashCard issues in different threads here in the forum. In most cases, the new update solved the problems related to the FlashCards. I checked the page of the European driver and found the Vista Toshiba value added Package that contains the utility FlashCard. It was published on 09/06/07 so I put t know why you write that the files have been published on 3 October. However

  (2) there could be several reasons why WiFi disconnects. First of all, I would recommend updating the Vista operating system to the last State. Then you should check if the WiFi signal is strong enough to make use of WLan correctly. A weak signal is sometimes suddenly disconnects. You should try to use the utility Intel ProSet wireless configuration tool to configure the WiFi network. Last but not least check this Toshiba Wlan portal for more details and proposals of solution:
  http://APS2.toshiba-tro.de/WLAN/

  (3) I m not an expert on security issues, but I recommend you contact the service provider authorized in your country for detailed information on your warranty period.

  (4) as you probably n t know the satellite series comes with a different hardware and software configuration. Are you sure that the laptop came with preinstalled MediaPlayer Express 100%? I don t think so. With the button CD/DVD will begin operating system Windows and Windows Media Player (if the CD has been inserted) or WinDVD player (if the DVD has been inserted)

  I hope I could help

• Block the specific IP traffic in ASA 5505

  Hi, we have an ASA 5505 in transparent mode and run a web service online. However, we notice a number of attempts to intrution from China and Korea and we need to block these IP traffic can anyone help please?

  config script is

  transparent firewall

  hostname xxyyASA

  Select msi14F/SlH4ZLjHH of encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Ethernet0/0

  Description - the Internet-

  switchport access vlan 2

  !

  interface Ethernet0/1

  Description - connected to the LAN-

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  Shutdown

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  Bridge-Group 1

  security-level 100

  !

  interface Vlan2

  nameif outside

  Bridge-Group 1

  security-level 0

  !

  interface BVI1

  Description - for management only-

  IP address xxx.yyy.zzz.uuu 255.255.xxx.yyy

  !

  passive FTP mode

  network of the WWW-SERVER-OBJ object

  Home xxx.yyy.zzz.jjj

  Description - webserver-

  WWW-SERVER-SERVICES-TCP-OBJ tcp service object-group

  Description - Services published on the WEB server-

  WWW-SERVER-SERVICES-UDP-OBJ udp service object-group

  Description - Services published on the WEB server - UDP

  Beach of port-object 221 225

  1719-1740 object-port Beach

  OUTSIDE-IN-ACL scope tcp access list deny any any eq 3306

  OUTSIDE-IN-ACL scope tcp access list deny any any eq telnet

  OUTSIDE-IN-ACL scopes allowed icmp an entire access list

  OUTSIDE-IN-ACL scopes permitted tcp access list any object WWW-SERVER-OBJ object-group WWW-SERVER-SERVICES-TCP-OBJ

  access list OUTSIDE-IN-ACL scopes permit tcp host xxx.yyy.zzz.uuu object WWW-SERVER-OBJ eq 3306

  OUTSIDE-IN-ACL scopes permitted udp access list any object WWW-SERVER-OBJ object-group WWW-SERVER-SERVICES-UDP-OBJ

  We need to block access of host say 64.15.152.208

  Just need the best step to follow and block access, without affecting the service or other host

  Thank you

  Insert a line like:

  OUTSIDE-IN-ACL scope access list deny host ip 64.15.152.208 all

  in front of your 3rd line "... to enable icmp a whole."

  If you have many of them, maybe do:

  object-group network blacklist

  host of the object-Network 64.15.152.208

  network-host another.bad.ip.here object

  object-network entire.dubious.subnet.here 255.255.255.0

  ...

  OUTSIDE-IN-ACL scope object-group BLACKLIST ip deny access list all

  If you want to take in scores of reputation on the outside, or the blacklist changes a lot, you might look into the Cisco ASA IPS module.

  Note that fleeing bad hosts help with targeted attacks, but not with denial of service; only, he moves to point decline since the application for the firewall server, without much effect on the net on your uplink bandwidth consumption.

  -Jim Leinweber, WI State Lab of hygiene

• Suggestions for improvements UCS for customer experienced

  I soon do my first audit for an experienced UCS client (not the best idea, I know). I guess that everything is properly configured with the latest fw and software.

  Does anyone have a suggestion of a factor often overlooked in a UCS configuration I can verify for this customer?

  I can give you a few things to check.  Some features depend on the UCSM version as well.

  -Review all logs audit & vulnerabilities, fix what you can

  -Examine the use of resource, highlight Pools close to the depletion

  -Examine all levels FW including BIOS, make sure that everything is at a uniform level.

  -Check the interfaces configured by unused.  (May be active, but not cable).

  -Check Core files.  May indicate a problem past or present

  -Ensure SALT newspapers are backed up regularly and allowed to an external server

  -Ensure that syslogs are enabled

  -Control of user accounts.  They use a unique 'admin account ' to use RBAC. Give users min. access to the performance of their tasks. Accountability when you use authentication to remote or 1:1 local user accounts.

  -Ensure the Call home is on & set up

  -Review the use of licenses & requirements for future expansion

  -Check if the follow-up Mgmt interface is enabled

  -Binding configuration rising test.  They use the individual links or Port channels for aggregating best.

  -Is the quality of service while running or could improve bandwidth consumption

  -Are used models (vNIC, Service profile etc.) for consistency with deployments

  -CDP enabled on vNIC?  Help with guests such as vSphere Tshooting CDP supported.

  That should help you get started on a checklist...

  Robert

• Tips to find the "top talkers" on Cisco ASA

  Y at - it a command that displays the users that use the most bandwidth? Or I need a 3rd party app that monitors the pipe? I basically am noticing a spike in bandwidth consumption from time to time and have no way to easily identify the culprit. Any suggestions would be greatly appreciated.

  Jeff

  Apart from the typical SSL the ASDM had a major overhaul. It now includes a firewall dashboard where you can see rules for superior access, services, hosts etc.

• I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  Please see this link in the topic "successful."

  Creative cloud using Enterprise | Applications and updates

  You can use managed delivery of applications for the following:

  • If you need to exercise strict control over the applications installed on client computers.
  • If end-users have administrator privileges on the computer.
  • To reduce Internet bandwidth consumption by preventing multiple downloads of self-service.
  • If there is no Internet access on client computers.

• Slide show image for mobile devices

  Hello world

  I'm doing my mobile site a little more user-friendly. On my current home page, I have a flash slideshow of images jpg image.

  Current page - photography of birds - Glenn Bartley Nature photography workshops

  I hope someone can help me with this move to a certain type of image slideshow that would work on mobile. Basically, I want to just images to scroll through all the seconds at random. Maybe 20 photos.

  Previously, I had a small banner ad of my main website that works on mobile. But when I tried to copy that code above doesn't seem to work. Perhaps because he was in a table?

  See banner advertising - Glenn Bartley Nature photography workshops - photography of birds, Nature, photography,.

  If someone has a simple code I can insert my workshops page to rotate the images through mobile devices I would really appreciate the help.

  Thank you very much!

  Glenn

  Mobile users might appreciate not all that consumption of bandwidth.  I often give my cell phone static image a users to look for not eating their limited data plans.

  On the other hand, most Tablet users have Wifi, so the bandwidth consumption is not as big a consideration for them.  However, 20 images is excessive.  5 or 6 means a better.

  If your site is built with delicate framework Bootstrap, you can use the built in component carousel Bootstrap described below.

  ALT-Web Design & Publishing: customization carousel of the Bootstrap

  
  

  Bootstrap in Adobe Dreamweaver CC 2015

  https://helpx.Adobe.com/Dreamweaver/using/bootstrap.html

  There are other sliders reactive carousel available online.

  Cycle2

  WOW Slider

  If you have a large number of images, you can use a thumbnail viewer Gallery and lightbox instead.

  Fancybox2

  Nancy O.

• connection from a server database to CF Server

  Hi, I was hoping someone could give me a few buying tips.
  
  Currently, I run cfmx7/w2k3 on a single box with sql server 2000 running on the same box. There are about 20 websites running on the box, and 1 of the sites quickly became very busy. I wanted to update this site to a new server on its own with a separate database server serving the current server and the new server. At this point I was thinking of getting a gigaswitch and connect them with some gigabit ethernet. Obviousely a difficult question to answer without knowing the database about bandwidth consumption but usually this solution would provide enough bandwidth between servers? or is the fiber one way more acceptable to take
  
  Thank you very much
  
  Oli

  You don't need to run a concert between the two link, as Windows will rarely use 70% of its traffic on a 10/100.
  Still a concert link would be good and would never get capped.